ABSTRACT
BACKGROUND: The orthodontic spring materials in use have a significant influence on the applied forces. The prerequisite to identify the in vitro< force deflection of the CAD/CAM fabricated springs is considered mandatory to identify the material characteristics. The purpose of the present investigation was to evaluate the mechanical load on 3D printed springs using different coil heights. MATERIAL AND METHODS: The springs were digitally designed with different coil heights using Autodesk Netfabb CAD software (San Rafael, CA, USA). Test specimens were manufactured using 3D printable experimental flexible material (Code: BM2008, GC, Tokyo, Japan). The specimens were divided according to the coil height into five groups, group A (n=4mm), group B (n=6mm), group C (n=8mm), group D (n=10mm) and group E (n=12mm). All group specimens were mechanically tested using a universal testing machine. Statistical analysis was performed using K-S-Test to compare the values of each to the control group (p< 0.001). RESULTS: The highest value in all groups was achieved by 5.43 N/mm in group A, while the lowest value was achieved by 0.11 N/mm in group E. CONCLUSIONS: 3D printed springs are mechanically affected by the coil heights and there is a direct correlation to the resulting force. Furthermore, the variations within the investigated groups must be thoroughly investigated prior to clinical application. Key words:CAD/CAM, 3D printing, Orthodontics, mechanical testing, material evaluation.
ABSTRACT
Cystic echinococcosis (CE) caused by the metacestode form of Echinococcus granulosus is a major public health problem especially in animal-raising regions of the world. In the present study, CE cases were determined during 2001-2005 by investigating different hospital and health directorship documents and Health Ministry documents, retrospectively. Our results show that there were 2534 (13.13%) cases in the Marmara region; 2114 (16.94%), in the Aegean region; 2578 (16.09%), Mediterranean region; 5404 (38.57%), in the Middle Anatolian region; 428 (5.70%), in the Black Sea region; 844 (6.80%), in the eastern Anatolian region; and 887 (2.75%), in the southeastern Anatolian region making a total of 14,789 CE cases. Finally, it has been determined that the patients were hospitalized for a total of 149,464 days.