ABSTRACT
Ice is present everywhere on Earth and has an essential role in several areas, such as cloud physics, climate change and cryopreservation. The role of ice is determined by its formation behaviour and associated structure. However, these are not fully understood1. In particular, there is a long-standing debate about whether water can freeze to form cubic ice-a currently undescribed phase in the phase space of ordinary hexagonal ice2-6. The mainstream view inferred from a collection of laboratory data attributes this divergence to the inability to discern cubic ice from stacking-disordered ice-a mixture of cubic and hexagonal sequences7-11. Using cryogenic transmission electron microscopy combined with low-dose imaging, we show here the preferential nucleation of cubic ice at low-temperature interfaces, resulting in two types of separate crystallization of cubic ice and hexagonal ice from water vapour deposition at 102 K. Moreover, we identify a series of cubic-ice defects, including two types of stacking disorder, revealing the structure evolution dynamics supported by molecular dynamics simulations. The realization of direct, real-space imaging of ice formation and its dynamic behaviour at the molecular level provides an opportunity for ice research at the molecular level using transmission electron microscopy, which may be extended to other hydrogen-bonding crystals.
ABSTRACT
Achieving both high efficiency and long-term stability is the key to the commercialization of perovskite solar cells (PSCs)1,2. However, the diversity of perovskite (ABX3) compositions and phases makes it challenging to fabricate high-quality films3-5. Perovskite formation relies on the reaction between AX and BX2, whereas most conventional methods for film-growth regulation are based solely on the interaction with the BX2 component. Herein, we demonstrate an alternative approach to modulate reaction kinetics by anion-π interaction between AX and hexafluorobenzene (HFB). Notably, these two approaches are independent but work together to establish 'dual-site regulation', which achieves a delicate control over the reaction between AX and BX2 without unwanted intermediates. The resultant formamidinium lead halides (FAPbI3) films exhibit fewer defects, redshifted absorption and high phase purity without detectable nanoscale δ phase. Consequently, we achieved PSCs with power conversion efficiency (PCE) up to 26.07% for a 0.08-cm2 device (25.8% certified) and 24.63% for a 1-cm2 device. The device also kept 94% of its initial PCE after maximum power point (MPP) tracking for 1,258 h under full-spectrum AM 1.5 G sunlight at 50 ± 5 °C. This method expands the range of chemical interactions that occur in perovskite precursors by exploring anion-π interactions and highlights the importance of the AX component as a new and effective working site to improved photovoltaic devices with high quality and phase purity.
ABSTRACT
Correlating atomic configurations-specifically, degree of disorder (DOD)-of an amorphous solid with properties is a long-standing riddle in materials science and condensed matter physics, owing to difficulties in determining precise atomic positions in 3D structures1-5. To this end, 2D systems provide insight to the puzzle by allowing straightforward imaging of all atoms6,7. Direct imaging of amorphous monolayer carbon (AMC) grown by laser-assisted depositions has resolved atomic configurations, supporting the modern crystallite view of vitreous solids over random network theory8. Nevertheless, a causal link between atomic-scale structures and macroscopic properties remains elusive. Here we report facile tuning of DOD and electrical conductivity in AMC films by varying growth temperatures. Specifically, the pyrolysis threshold temperature is the key to growing variable-range-hopping conductive AMC with medium-range order (MRO), whereas increasing the temperature by 25 °C results in AMC losing MRO and becoming electrically insulating, with an increase in sheet resistance of 109 times. Beyond visualizing highly distorted nanocrystallites embedded in a continuous random network, atomic-resolution electron microscopy shows the absence/presence of MRO and temperature-dependent densities of nanocrystallites, two order parameters proposed to fully describe DOD. Numerical calculations establish the conductivity diagram as a function of these two parameters, directly linking microstructures to electrical properties. Our work represents an important step towards understanding the structure-property relationship of amorphous materials at the fundamental level and paves the way to electronic devices using 2D amorphous materials.
ABSTRACT
Misfit dislocations at a heteroepitaxial interface produce huge strain and, thus, have a significant impact on the properties of the interface. Here, we use scanning transmission electron microscopy to demonstrate a quantitative unit-cell-by-unit-cell mapping of the lattice parameters and octahedral rotations around misfit dislocations at the BiFeO3/SrRuO3 interface. We find that huge strain field is achieved near dislocations, i.e., above 5% within the first three unit cells of the core, which is typically larger than that achieved from the regular epitaxy thin-film approach, thus significantly altering the magnitude and direction of the local ferroelectric dipole in BiFeO3 and magnetic moments in SrRuO3 near the interface. The strain field and, thus, the structural distortion can be further tuned by the dislocation type. Our atomic-scale study helps us to understand the effects of dislocations in this ferroelectricity/ferromagnetism heterostructure. Such defect engineering allows us to tune the local ferroelectric and ferromagnetic order parameters and the interface electromagnetic coupling, providing new opportunities to design nanosized electronic and spintronic devices.
ABSTRACT
The properties of two-dimensional (2D) van der Waals materials can be tuned through nanostructuring or controlled layer stacking, where interlayer hybridization induces exotic electronic states and transport phenomena. Here we describe a viable approach and underlying mechanism for the assisted self-assembly of twisted layer graphene. The process, which can be implemented in standard chemical vapour deposition growth, is best described by analogy to origami and kirigami with paper. It involves the controlled induction of wrinkle formation in single-layer graphene with subsequent wrinkle folding, tearing and re-growth. Inherent to the process is the formation of intertwined graphene spirals and conversion of the chiral angle of 1D wrinkles into a 2D twist angle of a 3D superlattice. The approach can be extended to other foldable 2D materials and facilitates the production of miniaturized electronic components, including capacitors, resistors, inductors and superconductors.
ABSTRACT
Nanoscale spatially controlled modulation of the properties of ferroelectrics via artificial domain pattering is crucial to their emerging optoelectronics applications. New patterning strategies to achieve high precision and efficiency and to link the resultant domain structures with device functionalities are being sought. Here, we present an epitaxial heterostructure of SrRuO3/PbTiO3/SrRuO3, wherein the domain configuration is delicately determined by the charge screening conditions in the SrRuO3 layer and the substrate strains. Chemical etching of the top SrRuO3 layer leads to a transition from in-plane a domains to out-of-plane c domains, accompanied by a giant (>105) modification in the second harmonic generation response. The modulation effect, coupled with the plasmonic resonance effect from SrRuO3, enables a highly flexible design of nonlinear optical devices, as demonstrated by a simulated split-ring resonator metasurface. This domain patterning strategy may be extended to more thin-film ferroelectric systems with domain stabilities amenable to electrostatic boundary conditions.
ABSTRACT
Integrating ferromagnetism (FM) and photoluminescence (PL) into one particular nanostructure as biological probe plays an irreplaceable role in accurate clinical diagnosis combining magnetic resonance and photoluminescence imaging technology. However, magnetic emergence generally needs a spin polarization at Fermi level to display a half-metallic electronic feature, which is not beneficial for preserving radiation recombination ability of photo-excited electron-hole carriers. To overcome this intrinsic difficulty, we propose a feasible atomic-hybridization strategy to anchor carbon quantum dots (CQDs) onto ZnO microsphere surface via breakage of C=O bonds at CQDs and subsequent Zn-3d and C-2p orbital hybridization, which not only ensures the carrier recombination but also leads to a room-temperature magnetism. Herein, the photoluminescence and magnetism coexist in this multifunctional heterojunction with outstanding biocompatibility. This work suggests that integration of magnetism and photoluminescence could be accomplished by particular interfacial orbital hybridization.
ABSTRACT
The ability to controllably manipulate complex topological polar configurations such as polar flux-closures via external stimuli may allow the construction of new electromechanical and nanoelectronic devices. Here, using atomically resolved in situ scanning transmission electron microscopy, we find that the polar flux-closures in PbTiO3/SrTiO3 superlattice films are mobile and can be reversibly switched to ordinary single ferroelectric c or a domains under an applied electric field or stress. Specifically, the electric field initially drives movement of a flux-closure via domain wall motion and then breaks it to form intermediate a/c striped domains, whereas mechanical stress first squeezes the core of a flux-closure toward the interface and then form a/c domains with disappearance of the core. After removal of the external stimulus, the flux-closure structure spontaneously recovers. These observations can be precisely reproduced by phase field simulations, which also reveal the evolutions of the competing energies during phase transitions. Such reversible switching between flux-closures and ordinary ferroelectric states provides a foundation for potential electromechanical and nanoelectronic applications.
ABSTRACT
Satellite pose estimation plays a crucial role within the aerospace field, impacting satellite positioning, navigation, control, orbit design, on-orbit maintenance (OOM), and collision avoidance. However, the accuracy of vision-based pose estimation is severely constrained by the complex spatial environment, including variable solar illumination and the diffuse reflection of the Earth's background. To overcome these problems, we introduce a novel satellite pose estimation network, FilterformerPose, which uses a convolutional neural network (CNN) backbone for feature learning and extracts feature maps at various CNN layers. Subsequently, these maps are fed into distinct translation and orientation regression networks, effectively decoupling object translation and orientation information. Within the pose regression network, we have devised a filter-based transformer encoder model, named filterformer, and constructed a hypernetwork-like design based on the filter self-attention mechanism to effectively remove noise and generate adaptive weight information. The related experiments were conducted using the Unreal Rendered Spacecraft On-Orbit (URSO) dataset, yielding superior results compared to alternative methods. We also achieved better results in the camera pose localization task, indicating that FilterformerPose can be adapted to other computer vision downstream tasks.
ABSTRACT
In van der Waals (vdW) heterostructures, the interlayer electron-phonon coupling (EPC) provides one unique channel to nonlocally engineer these elementary particles. However, limited by the stringent occurrence conditions, the efficient engineering of interlayer EPC remains elusive. Here we report a multitier engineering of interlayer EPC in WS2/boron nitride (BN) heterostructures, including isotope enrichments of BN substrates, temperature, and high-pressure tuning. The hyperfine isotope dependence of Raman intensities was unambiguously revealed. In combination with theoretical calculations, we anticipate that WS2/BN supercells could induce Brillouin-zone-folded phonons that contribute to the interlayer coupling, leading to a complex nature of broad Raman peaks. We further demonstrate the significance of a previously unexplored parameter, the interlayer spacing. By varying the temperature and high pressure, we effectively manipulated the strengths of EPC with on/off capabilities, indicating critical thresholds of the layer-layer spacing for activating and strengthening interlayer EPC. Our findings provide new opportunities to engineer vdW heterostructures with controlled interlayer coupling.
ABSTRACT
Possessed with advantageous optoelectronic properties, perovskites have boosted the rapid development of solution-processed solar cells. The performance of perovskite solar cells (PSCs) is significantly weakened by the carrier loss at grain boundary grooves (GBGs); however, it receives limited attention and there lacks effective approach to solve this issue. Herein, for the first time, we constructed the tungstate/perovskite heterointerface via a "two step" in situ reaction approach that provides effective defect passivation and ensures efficient carrier dynamics at the GBGs. The exposed perovskite at grain boundaries is converted to wide-band-gap PbWO4 via an in-situ reaction between Pb2+ and tungstate ions, which passivate defects due to the strong ionic bonding. Moreover, recombination loss is further suppressed via the heterointerface energetics modification based on an additional transformation from PbWO4 to CaWO4 . PSCs based on this groove modification strategy showed good universality in both normal and inverted structure, with an improved efficiency of 23.25 % in the n-i-p device and 23.33 % in the p-i-n device. Stable power output of the modified device could maintain 91.7 % after around 1100â h, and the device efficiency could retain 92.5 % after aging in air for around 2110â h, and 93.1 % after aging at 85 °C in N2 for 972â h.
ABSTRACT
BACKGROUND: It has been reported that Osaka prognostic score (OPS), based on C-reactive protein (CRP), total lymphocyte counts (TLC) and albumin (ALB), was relevant to prognosis in colorectal cancer. However, the role of OPS regarding prognosis in patients with esophageal squamous cell carcinoma (ESCC) has not been reported. The current study aimed to explore the clinical outcome of OPS and establish and validate a nomogram for survival prediction in ESCC after radical resection. METHODS: This retrospective study included 395 consecutive ESCC patients with radical resection. Then patients were randomly divided into two cohorts: training cohort (276) and validation cohort (119). The OPS, based on TLC, CRP and ALB, was constructed to verify the prognostic value by Kaplan-Meier curves and Cox analyses. A nomogram model for prognosis prediction of cancer-specific survival (CSS) was developed and validated in two cohorts. RESULTS: Kaplan-Meier curves regarding the 5-year CSS for the groups of OPS 0, 1, 2 and 3 were 55.3, 30.6, 17.3 and 6.7% (P < 0.001) in the training cohort and 52.6, 33.3, 15.8 and 9.1% (P < 0.001) in the validation cohort, respectively. Then the OPS score in multivariate Cox analysis was confirmed to be a useful independent score. Finally, a predictive OPS-based nomogram was developed and validated with a C-index of 0.68 in the training cohort and 0.67 in the validation cohort, respectively. All above results indicated that the OPS-based nomogram can accurately and effectively predict survival in ESCC after radical resection. CONCLUSION: The OPS serves as a novel, convenient and effective predictor in ESCC after radical resection. The OPS-based nomogram has potential independent prognostic value, which can accurately and effectively predict individual CSS in ESCC after radical resection.
Subject(s)
C-Reactive Protein/metabolism , Esophageal Neoplasms/metabolism , Esophageal Squamous Cell Carcinoma/metabolism , Inflammation/metabolism , Serum Albumin, Human/metabolism , Aged , China , Esophageal Neoplasms/mortality , Esophageal Neoplasms/surgery , Esophageal Squamous Cell Carcinoma/mortality , Esophageal Squamous Cell Carcinoma/surgery , Female , Humans , Lymphocyte Count , Male , Middle Aged , Multivariate Analysis , Predictive Value of Tests , Prognosis , Retrospective Studies , Survival AnalysisABSTRACT
We report a self-terminated electroless deposition method to prepare surfactant-free and monodispersed Pt nanoparticle (NP)-modified carbon fiber microelectrodes (Pt NP/CFEs) for electrochemical detection of hydrogen peroxide (H2O2) released from living cells. The surfactant-free and monodispersed Pt NPs with a uniform size of 65 nm are spontaneously deposited on a CFE surface by immersing an exposed carbon fiber (CF) of CFE in the PtCl42- solution, in which an exposed CF can be used as the reducing agent and stabilizer. A self-terminated electroless deposition method is demonstrated, in which the density and size of Pt NPs on a CFE surface do not increase when the reaction time increases from 20 to 60 min. The self-terminated electroless deposition process not only can effectively avoid any manual electrode modification and thus largely minimize person-to-person and electrode-to-electrode deviations but also can avoid the use of any extra reductant or surfactant in the fabrication process. Therefore, Pt NPs/CFEs, with good reproducibility and sensitivity, not only exhibit high electrocatalytic activity toward the oxidation of H2O2 but also maintain the spatial resolution of CFEs. Moreover, Pt NPs/CFEs can detect H2O2 with a wide linear range of 0.5-80 µM and a low detection limit of 0.17 µM and then can be successfully applied in the monitoring of H2O2 released from RAW 264.7 cells. The self-terminated electroless deposition method can also be extended to selectively prepare other metal NP-modified CFEs, such as Au NPs/CFEs or Ag NPs/CFEs, by choosing the metal ions with higher reduction potential as precursors. This work provides a simple, straightforward, and general method for the preparation of small, surfactant-free, and monodispersed metal NP-modified CFEs with high sensitivity, reproducibility, and spatial resolution.
Subject(s)
Hydrogen Peroxide , Metal Nanoparticles , Carbon Fiber , Humans , Microelectrodes , Reproducibility of Results , Surface-Active AgentsABSTRACT
The fundamental understanding of crystallization, in terms of microscopic kinetic and thermodynamic details, remains a key challenge in the physical sciences. Here, by using in situ graphene liquid cell transmission electron microscopy, we reveal the atomistic mechanism of NaCl crystallization from solutions confined within graphene cells. We find that rock salt NaCl forms with a peculiar hexagonal morphology. We also see the emergence of a transitory graphitelike phase, which may act as an intermediate in a two-step pathway. With the aid of density functional theory calculations, we propose that these observations result from a delicate balance between the substrate-solute interaction and thermodynamics under confinement. Our results highlight the impact of confinement on both the kinetics and thermodynamics of crystallization, offering new insights into heterogeneous crystallization theory and a potential avenue for materials design.
ABSTRACT
Aberrant protein glycosylation is involved in many diseases including cancer. This study investigated the role of fucosyltransferase VII (FUT7) in the progression of follicular thyroid carcinoma (FTC). FUT7 expression was found to be upregulated in FTC compared to paracancerous thyroid tissue, and in FTC with T2 stage of TMN classification compared to FTC with T1 stage. FUT7 overexpression promoted cell proliferation, epithelial-mesenchymal transition (EMT), and the migration and invasion of primary FTC cell line FTC-133. Consistently, FUT7 knock-down inhibited cell proliferation, EMT, as well as the migration and invasion of the metastatic FTC cell line FTC-238. Mechanistic investigation revealed that FUT7 catalyzed the α1,3-fucosylation of epidermal growth factor receptor (EGFR) in FTC cells. The extent of glycan α1,3-fucosylation on EGFR was positively correlated with the activation of EGFR in the presence/absence of epidermal growth factor (EGF) treatment. Furthermore, FUT7 was shown to enhance EGF-induced progression of FTC cells through mitogen-activated protein kinase (MAPK) and phosphatidylinositol-3-kinase (PI3K)/Akt signaling pathways. These findings provide a new perspective on FUT7 that may be a novel diagnostic and therapeutic target of FTC.
Subject(s)
Adenocarcinoma, Follicular/metabolism , Epidermal Growth Factor/pharmacology , ErbB Receptors/metabolism , Fucosyltransferases/metabolism , Adenocarcinoma, Follicular/drug therapy , Adenocarcinoma, Follicular/pathology , Cell Movement/drug effects , Cell Movement/physiology , Cell Proliferation/drug effects , Epidermal Growth Factor/metabolism , ErbB Receptors/drug effects , Humans , Mitogen-Activated Protein Kinases/metabolism , Phosphatidylinositol 3-Kinases/metabolism , Thyroid Neoplasms/drug therapy , Thyroid Neoplasms/genetics , Thyroid Neoplasms/pathology , Up-Regulation/drug effectsABSTRACT
Diffuse large B-cell lymphoma (DLBCL) has been reported to have a significant association with the hepatitis B virus (HBV) infection. However, there has been no experimental evidence to determine whether the components of the hepatitis B virus are expressed in lymphoid cells. In this study, we used immunohistochemical methods to explore whether the antigens of hepatitis B virus are expressed in DLBCL lymphoma cells in HBsAg-positive DLBCL patients (HBsAg + DLBCL). HBx antigen was detected in 48.9% of HBsAg + DLBCL patients, and the expression rate of the Pre-S2 antigen was 57.2%. HBx expression was significantly associated with high-level expression of c-Myc, while the Pre-S2 antigen was not. In this study, we demonstrated that HBx antigen and Pre-S2 antigen could be detected in lymphoma cells, and HBx expression was related to c-Myc expression. Our findings provide a strong basis for further study of the HBV-infected DLBCL and molecular mechanism underlying the lymphomagenesis.
Subject(s)
Hepatitis B Surface Antigens/analysis , Hepatitis B , Lymphoma, Large B-Cell, Diffuse , Trans-Activators/analysis , Viral Regulatory and Accessory Proteins/analysis , Hepatitis B/complications , Hepatitis B virus , Humans , Lymphoma, Large B-Cell, Diffuse/virologyABSTRACT
Oxygen reactivity plays a key role in the performance of ceria-based catalysts. Aberration-corrected transmission electron microscopy and molecular dynamics simulations were used to study the oxygen atom diffusion in ceria under activated conditions. Reactive oxygen atom and its real-time diffusion were visualized. The interplay between cerium and oxygen atoms originating from a Coulomb interaction was revealed by the out-of-plane buckling of cerium atoms associated with oxygen transport. Anisotropic oxygen atom diffusion that depends on crystal orientations was discovered, demonstrating a preferential [001] crystallographic diffusion pathway. These findings reveal prospects for applications of anisotropic orientation-relevant fluorite-structured oxides.
ABSTRACT
BACKGROUND : Oxaliplatin, used as first-choice treatment for colorectal cancer (CRC), induces sinusoidal endothelial injury and portal hypertension. This study investigated the characteristics of oxaliplatin-induced portal hypertension and evaluated the efficacy of endoscopic management of gastroesophageal variceal bleeding. METHODS : We performed a retrospective, multicenter, case-control study between January 2010 and December 2018. Patients who received oxaliplatin-based chemotherapy after CRC surgery and presented with portal hypertension and gastroesophageal varices were compared with consecutive patients with hepatitis B-related cirrhotic portal hypertension receiving endoscopic treatment for variceal bleeding. RESULTS : 39 patients with oxaliplatin-induced portal hypertension were identified, 35 of whom had a history of variceal bleeding. The median period between start of oxaliplatin-based chemotherapy and the occurrence of varices was 50.4 months (nâ=â39). A total of 26 patients with oxaliplatin-related portal hypertension and 230 patients with hepatitis B-related portal hypertension underwent endoscopic treatment. Kaplan-Meier analysis revealed that the 1-year rebleeding rate was significantly higher in the oxaliplatin group than in the hepatitis B group (43.3â% vs. 19.0â%, Pâ=â0.001). Multivariable Cox regression analysis showed that oxaliplatin-based chemotherapy was an independent factor for 3-year rebleeding (hazard ratio [HR] 2.46, 95â% confidence interval [CI] 1.24-4.87; Pâ=â0.01) and 3-year overall mortality (HR 9.43, 95â%CI 2.32-38.31; Pâ=â0.002). CONCLUSIONS : Oxaliplatin-related portal hypertension was characterized by massive ascites, splenomegaly, gastric varices, concomitant arterioportal fistula, and relatively normal liver function. Endoscopic treatment to prevent variceal rebleeding in these patients was unsatisfactory compared with endoscopic treatment for hepatitis B-related portal hypertension.
Subject(s)
Colorectal Neoplasms , Esophageal and Gastric Varices , Varicose Veins , Case-Control Studies , Colorectal Neoplasms/complications , Colorectal Neoplasms/drug therapy , Esophageal and Gastric Varices/etiology , Esophageal and Gastric Varices/therapy , Gastrointestinal Hemorrhage/etiology , Gastrointestinal Hemorrhage/therapy , Humans , Neoplasm Recurrence, Local , Oxaliplatin/adverse effects , Retrospective StudiesABSTRACT
The initial geographic latitude information is the key to the self-alignment of the strapdown inertial navigation system (SINS), but how to determine the latitude when the latitude cannot be obtained directly or in a short time? The latitude determination (LD) methods are introduced, including magnitude method, geometric method, and analytical methods 1 and 2, to solve this situation only by the output of the SINS itself. Simulation and experimental test results validate the efficiency of these LD methods. In order to improve the accuracy of the LD, the error of the LD method is derived through comparative analysis. Based on the relationship between LD error and inertial measurement unit (IMU) bias. Partial bias estimation method is introduced and executed during latitude determination. After compensating the estimated IMU bias, the accuracy of the LD will be further improved. Latitude errors are also affected by the latitude where SINS is located. Comprehensive simulation and experimental tests verify the effectiveness of the method. The IMU determined latitude can not only be used to achieve the self-alignment of the SINS, but also to correct the navigation latitude of the long-term SINS, thereby improving the autonomy and positioning accuracy of the navigation system.
ABSTRACT
Ectoine has fostered the development of products for skin care and cosmetics. In this study, we employed the marine bacterial strain Marinococcus sp. MAR2 to increase ectoine production by optimizing medium constituents using Response Surface Methodology (RSM) and a fed-batch strategy. The results from the steepest ascent and central composite design indicated that 54 g/L of yeast extract, 14.0 g/L of ammonium acetate, 74.4 g/L of sodium glutamate, and 6.2 g/L of sodium citrate constituted the optimal medium with maximum ectoine production (3.5 g/L). In addition, we performed fed-batch culture in the bioreactor, combining pH and dissolved oxygen to produce ectoine by Marinococcus sp. MAR2. The ectoine production, content, and productivity of 5.6 g/L, 10%, and 3.9 g/L/day were further reached by a fed-batch culture. Thus, the ectoine production by Marinococcus sp. MAR2 using RSM and fed-batch strategy shows its potential for industrial production.