Rheological behavior of Pluronic/Pluronic diacrylate hydrogels used for bacteria encapsulation in engineered living materials.

Pluronic (Plu) hydrogels mixed with variable fractions of Pluronic diacrylate (PluDA) have become popular matrices to encapsulate bacteria and control their growth in engineered living materials. Here we study the rheological response of 30 wt% Plu/PluDA hydrogels with PluDA fraction between 0 and 1. We quantify the range of viscoelastic properties that can be covered in this system by varying in the PluDA fraction. We present stress relaxation and creep-recovery experiments and describe the variation of the critical yield strain/stress, relaxation and recovery parameters of Plu/PluDA hydrogels as function of the covalent crosslinking degree using the Burgers and Weilbull models. The analyzed hydrogels present two stress relaxations with different timescales which can be tuned with the covalent crosslinking degree. We expect this study to help users of Plu/PluDA hydrogels to estimate the mechanical properties of their systems, and to correlate them with the behaviour of bacteria in future Plu/PluDA devices of similar composition.

Molecularly Defined Polyolefin Vitrimers from Catalytic Insertion Polymerization.

Vitrimers can combine the advantageous properties of cross-linked materials with thermoplastic processability. For the prominent case of polyethylene, established post-polymerization introduction of cross-linkable moieties results in extremely heterogeneous compositions of the chains. Here, we report the generation of functionalized polyethylenes directly by catalytic insertion polymerization, with incorporated cross-linkable aryl boronic esters or alternatively acetal-protected groups suited for cross-linking with difunctional boronic esters. In addition to the desired homogeneous in-chain distribution, the reactive cross-linkable groups are enriched at the chain ends. This enables the incorporation of all chains in the network, as also supported by simulations of all chains' compositions. The uniform molecular composition of the chains reflects in resulting vitrimers' material properties, particularly lack of leaching with solvents. At the same time, cross-linking is indeed fully reversible and the vitrimers can be recycled.

Fourier transformation liquid chromatography: increasing sensitivity by a factor of 50.

Methods that increase sensitivity are a constant topic in research. To increase the sensitivity for high-performance liquid chromatography (HPLC) a continuous injection method with a sinusoidal analyte concentration profile was developed. The sinusoidal analyte concentration profile is obtained by a sinusoidal variation of the relative volume contents between two solvent reservoirs, one containing a pure solvent and the other an analyte stock solution prepared with the same solvent. Discrete Fourier transformation enables the analyte-specific phase angle shift to be calculated from the chromatograms. The proposed method is established and evaluated for size exclusion chromatography (SEC). Accordingly, the phase angle shift is used for molecular weight determination by establishing a molecular weight calibration using different narrowly distributed polystyrene (PS) calibration standards. In a comparison with conventional SEC, the Signal-to-Noise ratio (S/N), normalized to the square root of the time of the evaluated data set, increases by a factor of approximately 50.

Inverse Vulcanization of Norbornenylsilanes: Soluble Polymers with Controllable Molecular Properties via Siloxane Bonds.

The inverse vulcanization produces high sulfur content polymers from alkenes and elemental sulfur. Control over properties such as the molar mass or the solubility of polymers is not well established, and existing strategies lack predictability or require large variations of the composition. Systematic design principles are sought to allow for a targeted design of materials. Herein, we report on the inverse vulcanization of norbornenylsilanes (NBS), with a different number of hydrolysable groups at the silicon atom. Inverse vulcanization of mixtures of NBS followed by polycondensation yielded soluble high sulfur content copolymers (50 wt % S) with controllable weight average molar mass (MW ), polydispersity (D), glass transition temperature (TG ), or zero-shear viscosity (η0 ). Polycondensation was conducted in the melt with HCl as a catalyst, abolishing the need for a solvent. Purification by precipitation afforded polymers with a greatly reduced amount of low molar mass species.

One-Pot Synthesis of Alternating (Ultra-High Molecular Weight) Multiblock Copolymers via a Combination of Anionic Polymerization and Polycondensation.

This article presents a fast, straightforward synthesis approach to polymerize alternating multiblock copolymers, ultra-high molecular weight (UHMW) (homo)polymers as well as precursors for complex macromolecular topologies such as comb or barbwire architectures. The one-pot synthesis strategy proposed in this work is based on anionic polymerization via a bifunctional initiator and the subsequent linking of macro dianions with a bifunctional linker, additionally overcoming the limitations associated with the monomer reactivity. Thus, the synthetic route guarantees the repeating size of polymer blocks and an equal distribution of functional groups in precursors for complex topologies. Dianions of polystyrene (PS), polyisoprene-b-polystyrene-b-polyisoprene, and poly-2-vinylpyridine-b-polystyrene-b-poly-2-vinylpyridine are linked with α , α ' -dibromo-para-xylene to UHMW and multiblock copolymers. Multiblock copolymers with on average up to 50 well-defined alternating A and B blocks are accessible within 15 min.

Effects of Yeast (1,3)-(1,6)-Beta-Glucan on Severity of Upper Respiratory Tract Infections: A Double-Blind, Randomized, Placebo-Controlled Study in Healthy Subjects.

OBJECTIVES: Each year, adults suffer about two to four upper respiratory tract infections (URTIs), mostly in winter. The aim of the study was to evaluate the effects of brewers' yeast (1,3)-(1,6)-beta-glucan on incidence and severity of upper respiratory tract infections (URTIs). METHODS: Generally healthy men and women (n = 299) reporting at least three URTIs during the previous year were randomized to receive either a placebo or 900 mg of yeast beta-glucan daily for 16 weeks during winter. In cases of acute URTI, the severity of URTI symptoms was assessed via the WURSS-21 questionnaire and the Jackson scale, and a clinical confirmation was implemented by the investigator. RESULTS: Overall, 70 subjects under placebo and 71 subjects under yeast beta-glucan experienced at least one clinically confirmed URTI episode. The global severity using WURSS-21 had been quite similar between the study groups (p = 0.5267), whereas during the first days of URTIs the severity was less pronounced in the yeast beta-glucan group. On the episode level, the severity of physical symptoms was significantly lower for all investigated time intervals up to 7 days under yeast beta-glucan (WURSS (Q2-11) (days 1-2: p = 0.0465, days 1-3: p = 0.0323, days 1-4: p = 0.0248, days 1-7: p = 0.0278), also confirmed for the Jackson scale). The reduction of severity was accompanied by a significant increase in the joy subscore of the Perceived Stress Questionnaire (PSQ20) (p = 0.0148). In addition, there was a reduction of systolic (p = 0.0458) and diastolic (p = 0.1439) blood pressure. CONCLUSION: Subjects supplementing with yeast beta-glucan benefit by a reduced severity of physical URTI symptoms during the first week of an episode, even though the incidence and global severity of common colds could not be altered in comparison to placebo. Furthermore, accompanying benefits in terms of blood pressure and mood were identified. Altogether, yeast beta-glucan supports the immune function.

Poly(sodium acrylate) hydrogels: synthesis of various network architectures, local molecular dynamics, salt partitioning, desalination and simulation.

Various poly(sodium acrylate) hydrogels with different architectures, such as single networks, interpenetrating double networks and surface crosslinked hydrogels, are synthesized with a systematic change in their degree of crosslinking. The influence of these 3D structures on the absorbency of aqueous NaCl solutions is investigated. The local polymer mobility in water is probed in the form of transverse (T2) 1H-relaxation at a low field, which allowed confirming the structural aspects of the studied network topologies. Salt partitioning between the gel and the surrounding solution phase in NaCl solutions with an initial salt concentration of c0 = 0.017-0.60 mol L-1 (≙1-35 g L-1) is investigated. The data are compared with an idealized mean-field Donnan model, which fit the experimental findings only under the assumption of a drastically reduced effective charge density of feff ≈ 25 mol% independent of the hydrogel used. The unequal salt distribution allows desalination of salt water by applying an external pressure to a swollen hydrogel to recover its water which has a lower salinity. The specific energy needed to desalinate 1 m3 was estimated to be 6-18 kW h m-3. This value decreases with a lower degree of swelling independent of the network topology. Besides the experiments, simulations based on a Poisson-Boltzmann mean-field model and MD simulations are performed to determine the degree of swelling and salt partitioning as a function of c0 for different hydrogels. Both simulations describe qualitatively the experimental data, where deviations can be ascribed to model simplifications and the imperfect structure of the hydrogels synthesized via free radical polymerization.

A New Quantum Cascade IR-Laser Online Detector: Chemical-Sensitive Size-Exclusion Chromatography Measurement at Unprecedented Low Levels.

Online chemically sensitive detectors for size exclusion chromatography (SEC) through coupled setups based on infrared (IR) (or NMR) spectrometers present new possibilities through unprecedented levels of polymer detail with respect to molecular weight and chemical composition. Herein, a new external cavity quantum cascade laser (EC-QCL) mid-IR spectrometer as a chemically sensitive online detector for SEC is custom-designed, built, and tested. This unique spectrometer features multiple broadly tunable EC-QCL sources, which can be operated in continuous wave and pulsed mode, accompanied with balanced liquid nitrogen cooled mercury cadmium telluride (MCT) detectors and a new custom-built transmission flow cell. Automated data analysis is done with a self-written MATLAB code. The limit of detection (LOD) is measured online, coupled with SEC chromatography, where on average, one carbonyl functionality in 530 000 g mol-1 at chromatographic conditions for SEC could be detected. It is possible to detect 0.46 µg (LOD) PMMA, which is approximately a factor of 30 lower than that reported for SEC-Fourier transform infrared.

Dietary and lifestyle predictors of folate insufficiency in non-supplemented German women.

Low folate status is a risk factor for birth defects. We studied concentrations of red blood cell (RBC)- and serum folate in 198 German women in relation to information on dietary folate intake, demographic and lifestyle factors. Median serum- and RBC-folate levels were; (14.7 and 589 nmol/L, respectively. Serum < 7.0 nmol/L or RBC-folate < 405 nmol/L were observed in 3.5% and 18.7% of the women, respectively. Three per cent of the women had both lowered serum and RBC-folate. Whereas RBC-folate > 952 nmol/L (optimal levels around conception) were observed in 9.6%. Serum- and RBC-folate were positively associated; they showed the expected correlations with homocysteine, but only weak correlations with folate intake. Younger age, lower fibre and higher carbohydrate intakes were associated with lower blood folate. Thus, folate intake of approximately 278 µg/d was not sufficient to achieve optimal folate status in young women. In conclusion, in the absence of fortification with folic acid, the majority of the women did not achieve folate status that is optimal for prevention of birth defects.

A Novel Self-Emulsifying Drug Delivery System (SEDDS) Based on VESIsorb® Formulation Technology Improving the Oral Bioavailability of Cannabidiol in Healthy Subjects.

Cannabidiol (CBD), a phytocannabinoid compound of Cannabis sativa, shows limited oral bioavailability due to its lipophilicity and extensive first-pass metabolism. CBD is also known for its high intra- and inter-subject absorption variability in humans. To overcome these limitations a novel self-emulsifying drug delivery system (SEDDS) based on VESIsorb® formulation technology incorporating CBD, as Hemp-Extract, was developed (SEDDS-CBD). The study objective was to evaluate the pharmacokinetic profile of SEDDS-CBD in a randomized, double-blind, cross-over design in 16 healthy volunteers under fasted conditions. As reference formulation, the same Hemp-Extract diluted with medium-chain triglycerides (MCT-CBD) was used. CBD dose was standardized to 25 mg. Pharmacokinetic parameters were analyzed from individual concentration-time curves. Single oral administration of SEDDS-CBD led to a 4.4-fold higher Cmax and a 2.85-/1.70-fold higher AUC0-8h/AUC0-24h compared to the reference formulation. Tmax was substantially shorter for SEDDS-CBD (1.0 h) compared to MCT-CBD (3.0 h). Subgroup analysis demonstrated a higher bioavailability in women compared to men. This difference was seen for MCT-CBD while SEDDS-CBD mitigated this gender effect. Overall, SEDDS-CBD showed a significant improvement for all determined pharmacokinetic parameters: increased CBD plasma values (Cmax), favorably enhanced bioavailability (AUC) and fast absorption (Tmax). No safety concerns were noted following either administration.

Medium Resolution 1 H-NMR at 62 MHz as a New Chemically Sensitive Online Detector for Size-Exclusion Chromatography (SEC-NMR).

A state-of-the-art, medium-resolution 1 H-NMR spectrometer (62 MHz) is used as a chemically sensitive online detector for size-exclusion chromatography of polymers such as polymethylmethacrylate (PMMA) and polystyrene (PS). The method uses protonated eluents and works at typical chromatographic conditions with trace amounts of analytes (<0.5 g L-1 after separation). Strong solvent suppression, e.g., by a factor of 500, is achieved by means of T1 -filtering and mathematical subtraction methods. Substantial improvements are made with respect to previous work in terms of the sensitivity (signal-to-noise ratio up to 130:1, PMMA OCH3 ) and selectivity (peak width, full width half maximum (FWHM) 4 Hz on-flow). Typical homopolymers and a blend are investigated to deformulate their composition along the dimensions of molecular weight and NMR chemical shift. These results validate this new hyphenated chromatography method, which can greatly facilitate analysis and is much more effective than previously published results.

Online Detection of Functional Groups in SEC via Quantum Cascade Laser IR Spectroscopy.

The development of coupled techniques based on chemically sensitive detectors, such as FTIR or NMR spectrometers, for size exclusion chromatography (SEC) provides sophisticated methods for determining the molecular-weight-dependent chemical composition in polymers. However, the detection of rare functionalities such as end groups or branching points presents a challenge, especially for online coupled SEC detection, which is based on low-concentration chromatography. To address this issue, for the first time, an external cavity quantum cascade laser (EC-QCL) infrared spectrometer is coupled to an SEC. The system is evaluated using polystyrene/poly(methyl methacrylate) (PS/PMMA) blends. The current limit of detection for the carbonyl (PMMA) stretch vibration at 1730 cm-1 with this technique is 3.5 µg PMMA on a semipreparative column (typical load of 2.5 mg polymer in total). That equals 0.15 mol% of PMMA in the PS/PMMA blend and corresponds to one carbonyl group per 70 kg mol-1 polymer.

The effectiveness of daily supplementation with 400 or 800 µg/day folate in reaching protective red blood folate concentrations in non-pregnant women: a randomized trial.

PURPOSE: Folate required to achieve desirable red blood cell (RBC) folate concentrations within 4-8 weeks pre-pregnancy is not known. We studied the effect of supplementation with 400 or 800 µg/day folate in achieving RBC-folate ≥906 nmol/L. METHODS: Non-pregnant women were randomized to receive multinutrient supplements containing 400 µg/day (n = 100) or 800 µg/day (n = 101) folate [folic acid and (6S)-5-CH3-H4folate-Ca (1:1)]. The changes of folate biomarkers were studied after 4 and 8 weeks in the 198 women who returned at least for visit 2. RESULTS: At baseline, 12 of the 198 participants (6.1%) had RBC-folate <340 nmol/L, but 88% had levels <906 nmol/L. The RBC-folate concentrations increased significantly in the 800 µg/day (mean ± SD = 652 ± 295 at baseline; 928 ± 330 at 4 weeks; and 1218 ± 435 nmol/L at 8 weeks) compared with the 400 µg/day [632 ± 285 at baseline (p = 0.578); 805 ± 363 at 4 weeks (p < 0.001); 1021 ± 414 nmol/L at 8 weeks (p < 0.001)]. The changes of RBC-folate were greater in the 800 µg/day than in the 400 µg/day at any time (changes after 8 weeks: 566 ± 260 vs. 389 ± 229 nmol/L; p < 0.001). Significantly more women in the 800 µg group achieved desirable RBC-folate concentrations at 4 weeks (45.5 vs. 31.3%; p = 0.041) or 8 weeks (83.8 vs. 54.5%; p < 0.001) compared with the 400 µg group. RBC-folate levels below the population median (590 nmol/L) were associated with a reduced response to supplements. CONCLUSIONS: 88% of the women had insufficient RBC-folate to prevent birth defects, while 6.1% had deficiency. Women with low RBC-folate were unlikely to achieve desirable levels within 4-8 weeks, unless they receive 800 µg/day. The current supplementation recommendations are not sufficient in countries not applying fortification. TRIALS REGISTER: The trial was registered at The German Clinical Trials Register: DRKS-ID: DRKS00009770.

L-Arginine and B vitamins improve endothelial function in subjects with mild to moderate blood pressure elevation.

PURPOSE: The aim of this trial was to investigate the influence of a dietetic product consisting of a unique combination of L-arginine with the vitamins B6, folic acid and B12 (Telcor® Arginin plus) on endothelial dysfunction. METHODS: Subjects aged 40-65 years with mild to moderate blood pressure (BP) elevation not treated with anti-hypertensive drugs were randomly assigned to either the dietetic product (n = 40) or a matching placebo (n = 41) for 3 months with open follow-up for a further 3 months. Postprandial change in endothelial function was assessed using the validated reactive hyperaemia index (RHI) at 3 months compared to the study onset (RHI post-pre, visit 3-visit 1; ΔΔRHI). Secondary parameters included BP and plasma homocysteine concentration. RESULTS: The primary efficacy analysis revealed superiority of the nutritional intervention over placebo (p = 0.0349) in reducing the deterioration of endothelial function. While in the active group ΔΔRHI increased (0.371 ± 0.122), almost no change could be detected in the placebo group (0.031 ± 0.100), thus demonstrating a significant improvement in vascular function in the intervention group. Moreover, the intervention reduced BP and homocysteine levels. Non-serious adverse events were equally distributed in both groups, and none of the events were assessed as possibly intervention-related by the investigators. CONCLUSIONS: This trial confirmed the effective and safe use of dietary management with L-arginine in combination with B vitamins. The primary efficacy analysis demonstrated a statistically significant superiority of the combination of L-arginine with B vitamins over placebo in improving and restoring impaired endothelial function and lowering BP in patients with mild to moderate blood pressure elevation.

Divergence of the third harmonic stress response to oscillatory strain approaching the glass transition.

The leading nonlinear stress response in a periodically strained concentrated colloidal dispersion is studied experimentally and by theory. A thermosensitive microgel dispersion serves as well-characterized glass-forming model, where the stress response at the first higher harmonic frequency (3ω for strain at frequency ω) is investigated in the limit of small amplitude. The intrinsic nonlinearity at the third harmonic exhibits a scaling behavior which has a maximum in an intermediate frequency window and diverges when approaching the glass transition. It captures the (in-) stability of the transient elastic structure. Elastic stresses in-phase with the third power of the strain dominate the scaling. Our results qualitatively differ from previously derived scaling behavior in dielectric spectroscopy of supercooled molecular liquids. This might indicate a dependence of the nonlinear response on the symmetry of the external driving under time reversal.

Hyphenated low-field NMR techniques: combining NMR with NIR, GPC/SEC and rheometry.

Hyphenated low-field NMR techniques are promising characterization methods for online process analytics and comprehensive offline studies of soft materials. By combining different analytical methods with low-field NMR, information on chemical and physical properties can be correlated with molecular dynamics and complementary chemical information. In this review, we present three hyphenated low-field NMR techniques: a combination of near-infrared spectroscopy and time-domain NMR (TD-NMR) relaxometry, online (1) H-NMR spectroscopy measured directly after size exclusion chromatographic (SEC, also known as GPC) separation and a combination of rheometry and TD-NMR relaxometry for highly viscous materials. Case studies are reviewed that underline the possibilities and challenges of the different hyphenated low-field NMR methods. Copyright © 2015 John Wiley & Sons, Ltd.

High performance liquid chromatography with mid-infrared detection based on a broadly tunable quantum cascade laser.

This work introduces a tunable mid-infrared (mid-IR) external cavity quantum cascade laser (EC-QCL) as a new molecular specific detector in liquid chromatography. An EC-QCL with a maximum tunability of 200 cm(-1) (1030-1230 cm(-1)) was coupled to isocratic high performance liquid chromatography (HPLC) for the separation of sugars with a cation exchange column (counter ion: Ca(2+)) and distilled water as the mobile phase. Transmission measurements in a 165 µm thick flow cell allowed for on-line coupling and independent quantification of glucose, fructose and sucrose in the concentration range from 5 mg mL(-1) to 100 mg mL(-1) in several beverages. The results obtained with the EC-QCL detector were found to be in good agreement with those obtained using a differential refractive index detector as a reference. The standard deviation of the method for the linear calibration was better than 5 mg mL(-1) for all sugars and reached a minimum of 1.9 mg mL(-1), while the DRI detector reached a minimum of 1 mg mL(-1). Besides the quantification of sugars for which a calibration was performed, also chromatographic peaks of other components could be identified on the basis of their IR absorption spectra. This includes taurine, ethanol, and sorbitol.

Assessment of liver size by ultrasonography.

BACKGROUND: To determine liver span sonographically in a randomly selected population sample and identify factors that affect liver size. METHODS: A total of 1,789 subjects (963 females, 826 males; mean age 41.8 ± 12.8 years) underwent sonographic examination of the liver in the midclavicular line to determine liver span. Subjects underwent physical examination and blood tests and completed a standardized interview questionnaire. RESULTS: The average liver span in the midclavicular line for the overall collective was 15.0 ± 1.5 cm; the average for females was 14.9 ± 1.6 cm and 15.1 ± 1.5 cm for males. Liver span exceeded 16 cm in 24.3% of subjects. Results of the multivariate analysis showed that, of the factors potentially influencing liver span, gender, age, body mass index, body height, fatty liver (p < 0.0001), waist-to-hip ratio (p = 0.015), and metabolic syndrome (p = 0.032) are significant. By contrast, diabetes mellitus, alcohol consumption, tobacco consumption, physical activity, and laboratory findings showed no influence. CONCLUSIONS: Sonographic measurement of liver span in the midclavicular line is a simple method for routine clinical use. Gender, age, body mass index, waist-to-hip ratio, body height, hepatic steatosis, and metabolic syndrome are factors associated with liver span.

Predicting maximum strain hardening factor in elongational flow of branched pom-pom polymers from polymer architecture.

We present a model-driven predictive scheme for the uniaxial extensional viscosity and strain hardening of branched polymer melts, specifically for the pom-pom architecture, using the small amplitude oscillatory shear mastercurve and the polymer architecture. A pom-pom shaped polymer is the simplest architecture with at least two branching points, needed to induce strain hardening. It consists of two stars, each with q arms of the molecular weight M w , a , connected by a backbone of M w , b . Despite the pom-pom constitutive model, experimental data of systematic investigations lack due to synthetic complexity. With an optimized approach, we synthesized polystyrene pom-pom model systems with systematically varied M w , a and M w , b . Experimentally, we identify four characteristic strain rate dependent regimes of the extensional viscosity, which can be predicted from the rheological mastercurve. Furthermore, we find that the industrially important maximum strain hardening factor depends only on the arm number by [ q 2 / ln ( 3 q ) ] . This framework offers a model-based design of branched polymers with predictable melt flow behavior.

Unexpected Stress Overshoot in Extensional Flow of Star Polymer Melts.

Previous studies have shown that the nonlinear rheological behavior of 3-arm star polymer melts in fast extensional flow is identical to that of linear polymers with the same span molecular weight, because the star polymers are highly aligned and have a similar conformation as the corresponding linear polymers. However, with more arms, it would be more difficult for the stars to be aligned like linear chains, and the nonlinear extensional rheology of star polymers with more arms under large deformations has not been investigated yet. Here we show that the star polystyrene (8-10 arms) melts behave differently from the linear polystyrenes. A transient stress overshoot is observed in the fast extensional flow, probably due to the difference in entanglement density near and far away from the branch point.