ABSTRACT
A Ru-containing complex shows good catalytic performance toward the hydrogenation of levulinic acid (LA) to γ-valerolactone (GVL) with the assistance of organic base ligands (OBLs) and CO2. Herein, we report the competitive mechanisms for the hydrogenation of LA to GVL, 4-oxopentanal (OT), and 2-methyltetrahydro-2,5-furandiol (MFD) with HCOOH or H2 as the H source catalyzed by RuCl3 in aqueous solution at the M06/def2-TZVP, 6-311++G(d,p) theoretical level. Kinetically, the hydrodehydration of LA to GVL is predominant, with OT and MFD as side products. With HCOOH as the H source, initially, the OBL (triethylamine, pyridine, or triphenylphosphine) is responsible for capturing H+ from HCOOH, leading to HCOO- and [HL]+. Next, the Ru3+ site is in charge of sieving H- from HCOO-, yielding [RuH]2+ hydride and CO2. Alternatively, with H2 as the H source, the OBL stimulates the heterolysis of H-H bond with the aid of Ru3+ active species, producing [RuH]2+ and [HL]+. Toward the [RuH]2+ formation, H2 as the H source exhibits higher activity than HCOOH as the H source in the presence of an OBL. Thereafter, H- in [RuH]2+ gets transferred to the unsaturated C site of ketone carbonyl in LA. Afterwards, the Ru3+ active species is capable of cleaving the C-OH bond in 4-hydroxyvaleric acid, yielding [RuOH]2+ hydroxide and GVL. Subsequently, CO2 promotes Ru-OH bond cleavage in [RuOH]2+, forming HCO3- and regenerating the Ru3+-active species owing to its Lewis acidity. Lastly, between the resultant HCO3- and [HL]+, a neutralization reaction occurs, generating H2O, CO2, and OBLs. Thus, the present study provides insights into the promotive roles of additives such as CO2 and OBLs in Ru-catalyzed hydrogenation.
ABSTRACT
For the conversion of fructose/methylglucoside (MG) into both methyl formate (MF) and methyl levulinate (MLev), the C-source of formate [HCOO]- remains unclear at the molecular level. Herein, reaction mechanisms catalyzed by [CH3OH2]+ in a methanol solution were theoretically investigated at the PBE0/6-311++G(d,p) level. For the conversion of fructose into MF and MLev, the formate [HCOO]- comes from the C1-atom of fructose, in which the rate-determining step lies in the reaction of 5-hydroxymethylfurfural (HMF) with CH3OH to yield MF and MLev. The reaction of fructose with CH3OH kinetically tends to generate HMF intermediates rather than yield (MF + MLev). When MG is dissolved in a methanol solution, its O2, O3, and O4 atoms are closer to the first layer of the solvent than O1, O5, and O6 atoms. For the dehydration of MG with methanol into MF and MLev, the formate [HCOO]- stems from the dominant C1- and secondary C3-atoms of MG. Kinetically, MG is ready to yield (MF + MLev), whereas fructose can induce the reaction to remain at the HMF intermediate, inhibiting the further conversion of HMF with CH3OH into MF and MLev. If MG isomerizes into fructose, the reaction will be more preferable for yielding HMF rather than (MF + MLev).
ABSTRACT
In a solution of sorbitol (SBT) and Ga(OTf)3 compounds, the coordination of sorbitol (SBT) to [Ga(OTf)n]3-n (n = 0-3) has been investigated, using both ESI-MS spectra and density functional theory (DFT) calculations at the M06/6-311++g(d,p), aug-cc-pvtz level using a polarized continuum model (PCM-SMD). In sorbitol solution, the most stable conformer of sorbitol includes three intramolecular H-bonds, i.e., O2Hâ¯O4, O4Hâ¯O6, and O5Hâ¯O3. Through ESI-MS spectra, in a tetrahydrofuran solution of both SBT and Ga(OTf)3 compounds, five main species are observed, i.e., [Ga(SBT)]3+, [Ga(OTf)]2+, [Ga(SBT)2]3+, [Ga(OTf)(SBT)]2+, and [Ga(OTf)(SBT)2]2+. Through DFT calculations, in a solution of sorbitol (SBT) and Ga(OTf)3 compounds, the Ga3+ cation tends to form five six-coordination complexes, i.e., [Ga(η2O,O-OTf)3], [Ga(η3O2-O4-SBT)2]3+, [(η2O,O-OTf)Ga(η4O2-O5-SBT)]2+, [(η1O-OTf)(η2O2,O4-SBT)Ga(η3O3-O5-SBT)]2+, and [(η1O-OTf)(η2O,O-OTf)Ga(η3O3-O5-SBT)]+, which are in good agreement with the experimental observation of the ESI-MS spectra. For both [Ga(OTf)n]3-n (n = 1-3) and [Ga(SBT)m]3+ (m = 1, 2) complexes, the negative charge transfer from ligands to the Ga3+-center plays an important role in their stability, because of the strong polarization of the Ga3+ cation. For [Ga(OTf)n(SBT)m]3-n (n = 1, 2; m = 1, 2) complexes, the negative charge transfer from ligands to the Ga3+-center plays an essential role in their stability, accompanied by an electrostatic interaction between the Ga3+-center and ligands and/or spatial inclusion of ligands toward the Ga3+-center.
ABSTRACT
Al-containing catalysts, e.g., Al(OTf)3, show good catalytic performance toward the conversion of cellulose to fructose in methanol solution. Here, we report the catalytic isomerization and alcoholysis mechanisms for the conversion of cellobiose to fructose at the PBE0/6-311++G(d,p), aug-cc-pVTZ theoretical level, combining the relevant experimental verifications of electrospray ionization mass spectrometry (ESI-MS), high-performance liquid chromatography (HPLC), and the attenuated total reflection-infrared (ATR-IR) spectra. From the alcoholysis of Al(OTf)3 in methanol solution, the catalytically active species involves both the [CH3OH2]+ Brønsted acid and the [Al(CH3O)(OTf)(CH3OH)4]+ Lewis acid. There are two reaction pathways, i.e., one through glucose (glycosidic bond cleavage followed by isomerization, w-G) and another through cellobiulose (isomerization followed by glycosidic bond cleavage, w-L). The Lewis acid ([Al(CH3O)(OTf)(CH3OH)4]+) is responsible for the aldose-ketose tautomerization, while the Brønsted acid ([CH3OH2]+) is in charge of ring-opening, ring-closure, and glycosidic bond cleavage. For both w-G and w-L, the rate-determining steps are related to the intramolecular [1,2]-H shift between C1-C2 for the aldose-ketose tautomerization catalyzed by the [Al(CH3O)(OTf)(CH3OH)4]+ species. The Lewis acid ([Al(CH3O)(OTf)(CH3OH)4]+) exhibits higher catalytic activity toward the aldose-ketose tautomerization of glycosyl-chain-glucose to glycosyl-chain-fructose than that of chain-glucose to chain-fructose. Besides, the Brønsted acid ([CH3OH2]+) shows higher catalytic activity toward the glycosidic bond cleavage of cellobiulose than that of cellobiose. Kinetically, the w-L pathway is predominant, whereas the w-G pathway is minor. The theoretically proposed mechanism has been experimentally testified. These insights may advance on the novel design of the catalytic system toward the conversion of cellulose to fructose.
ABSTRACT
The fundamental understanding of the cooperativity of a Brønsted acid together with its anion for cellulose conversion in an aqueous solution is limited at present, in which cellobiose has usually been regarded as a bridge that connects monosaccharides and cellulose. The mechanism of ß-cellobiose conversion to 5-hydroxymethylfurfural (HMF) catalyzed by a Brønsted acid (H3O+) accompanied by counteranions in an aqueous solution has been studied using quantum chemical calculations at the M06-2X/6-311++G(d,p) level under a polarized continuum model (PCM-SMD). For the formation of the first HMF from cellobiose, there are three reaction pathways, i.e., through cellobiulose and glycosyl-HMF (C/H), through cellobiulose and fructose (C/F/H), and through glucose (C/G/H). For these three reaction pathways, the rate-determining steps are associated with the intramolecular [1,2]-H shift in the aldose-ketose tautomerization. C/H is the thermodynamically predominant pathway, while C/G/H is the kinetically dominant pathway. From cellobiose, the origin of the first HMF results kinetically from a small proportion of both C/H and C/F/H and from a large proportion of C/G/H. For the role of the counteranion in the catalytic activity of H3O+, the halide anions (Cl- and Br-) act as promoters, whereas both NO3- anions and carboxylate-containing anions behave as inhibitors. The roles of these anions in ß-cellobiose conversion to HMF can be correlated with their electrostatic potential and atomic number, which may cause a decrease in the relative enthalpy energy and the value of entropy on interacting with the cation moiety. These insights may advance the novel design of sustainable conversion systems for cellulose conversion into HMF.
ABSTRACT
The selective removal of oxygen from 5-hydroxymethylfurfural (HMF) is challenging for the effective utilization of biomass. The catalytic mechanisms of palladium acetate toward the conversion of HMF to furfuryl alcohol (FFA), 5-methylfurfural (5-MF) and 2,5-dihydroxymethyl furan (DHMF) have been theoretically investigated. The decarbonylation of HMF to FFA includes (i) migratory extrusion, (ii) metal-acetate-co-assisted deprotonation, (iii) decarbonylation, (iv) metal-assisted deprotonation, and (v) migratory extrusion and catalyst regeneration. Both hydrogenation and deoxidation of HMF with HCOOH as the H-source involve (i) migratory extrusion, (ii) oxidative addition, (iii) reductive elimination, (iv) metal-assisted deprotonation, and (v) migratory extrusion and catalyst regeneration. The C-H bond cleavage is the crucial reaction step, in which the metal-acetate-co-assisted deprotonation is kinetically more preferable than the oxidative addition. Both FFA and DHMF are kinetically superior to 5-MF. In terms of selectivity, increasing the temperature is beneficial to decarbonylation and decreasing the temperature is advantageous to hydrogenation. The present finding provides molecular-level insight into the functions of both the metal-center and coordinated-ligand in the Pd(OAc)2 catalyst, which may drive the novel design of catalytic systems toward both decarbonylation and hydrogenation reactions.
ABSTRACT
It is unclear at the molecular level why HY (HY = RSH, or ROH, or RNH2) with HPPh2 additives kinetically affects the reaction pathway to the formation of different monomers (Ph2P-SeCd-Y or Ph2P-SeCdSe-Y) in the systhesis of semiconductor nanocrystals. In the present work, it was found that in a [Cd(OA)2 + Se[double bond, length as m-dash]P(C8H17)3 + HPPh2 + HY] mixture, HY behaves as a mediator for the formation of the initial kind of monomer, besides as a hydrogen/proton donor in the release of oleic acid and as an accelerant in the Se-P bond cleavage, which follows the mechanism of hydrogen-shift/nucleophilic-attack. The capability of the HY additive to provide a H-source decreases in the order SePPh2H > RSH > HPPh2 > ROH > RNH2, while the performance of HY to accelerate Se-P bond cleavage decreases in the order HPPh2 > RSH > RNH2 > ROH. The capacity of HY to promote the formation of the Ph2P-SeCd-Y monomer decreases in the order RSH > HPPh2 > ROH > RNH2, while the effect of HY to drive the formation of the Ph2P-SeCdSe-Y monomer decreases in the order HPPh2 > RSH > RNH2 > ROH. The activation strain energy plays a key role in both the Se-P and H-Y bond cleavage, which correlates negatively to the size of the coordinated atom radius. When only HPPh2 is present without other HY species (HY = RNH2, or RSH, or ROH), Ph2P-SeCdSe-PPh2 is preferentially formed. Alternatively, when both HY (HY = RNH2, or RSH, or ROH) and HPPh2 are present, Ph2P-SeCd-Y is favorably formed. For the formation of Ph2P-SeCd-Y (Y = -PPh2, -SR, -OR, and -NHR), SePPh2H embodies the catalytic performance, while HPPh2 serves as the catalyst for the formation of Ph2P-SeCdSe-Y (Y = -NHR or -OR). Our study brings a molecular-level insight into the relationship between the CdSe monomer and the phosphorous-containing side-product, which may advance the rational design and synthesis of quantum dots.
ABSTRACT
The formation mechanism of CdSe monomers from the reaction of cadmium oleate (Cd(OA)2) and SePPh2H in the presence of HPPh2 and RNH2 was studied systematically at the M06//B3LYP/6-31++G(d,p),SDD level in 1-octadecene solution. Herein, SePPh2H, HPPh2, and RNH2 act as hydrogen/proton donors with a decreased capacity, leading to the release of oleic acid (RCOOH). The longer the radius of the coordinated atom is, the larger the size of the cyclic transition state is, which lowers the activation strain and the Gibbs free energy of activation for the release of RCOOH. From the resulting RCOOCdSe-PPh2, for the formation of Ph2P-CdSe-PPh2 (G), SePPh2H acts as a catalyst, in which the turnover frequency determining transition state (TDTS) is characteristic of the Se-P bond cleavage. For the formation of RHN-CdSe-PPh2 (H), SePPh2H also serves as a catalyst, in which the TDTS is representative of the N-H bond cleavage. For the formation of Ph2PSe-CdSe-NHR (I), HPPh2 behaves as a catalyst, in which the TDTS is typical of the Se-P and N-H bond cleavage. The rate constants increase as kI < kH < kG, which is in good agreement with our previous experimental observations reported. The present study brings insight into the use of additives such as HPPh2 and RNH2 to synthesize colloidal quantum dots.
ABSTRACT
The catalytic mechanism of 2NO + 2CO â N2 + 2CO2 on Rh4 cluster has been systematically investigated on the ground and first excited states at the B3LYP/6-311+G(2d),SDD level. For the overall reaction of 2NO + 2CO â N2 + 2CO2, the main reaction pathways take place on the facet site rather than the edge site of the Rh4 cluster. The turnover frequency (TOF) determining transition states are characteristic of the second N-O bond cleavage with rate constant k4 = 1.403 × 10(11) exp (-181â¯203/RT) and the N-N bond formation for the intermediate N2O formation with rate constant k2 = 3.762 × 10(12) exp (-207â¯817/RT). The TOF-determining intermediates of (3)N(b)Rh4NO and (3)N(b)Rh4O(b)(NO) are associated with the nitrogen-atom molecular complex, which is in agreement with the experimental observation of surface nitrogen. On the facet site of Rh4 cluster, the formation of CO2 stems solely from the recombination of CO and O atom, while N2 originates partly from the recombination of two N atoms and partly from the decomposition of N2O. For the N-O bond cleavage or the synchronous N-O bond cleavage and C-O bond formation, the neutral Rh4 cluster exhibits better catalytic performance than the cationic Rh4(+) cluster. Alternatively, for N-N bond formation, the cationic Rh4(+) cluster possesses better catalytic performance than the neutral Rh4 cluster.
ABSTRACT
The peroxo dizinc Zn(2)O(2) complex Q coordinated by imidazole and carboxylate groups for each Zn center has been designed to model the hydroxylase component of methane monooxygenase (MMO) enzyme, on the basis of the experimentally available structure information of enzyme with divalent zinc ion and the MMO with Fe(2)O(2) core. The reaction mechanism for the hydroxylation of methane and its derivatives catalyzed by Q has been investigated at the B3LYP*/cc-pVTZ, Lanl2tz level in protein solution environment. These hydroxylation reactions proceed via a radical-rebound mechanism, with the rate-determining step of the C-H bond cleavage. This radical-rebound reaction mechanism is analogous to the experimentally available MMOs with diamond Fe(2)O(2) core accompanied by a coordinate number of six for the hydroxylation of methane. The rate constants for the hydroxylation of substrates catalyzed by Q increase along CH(4) < CH(3)F < CH(3)CN ≈ CH(3)NO(2) < CH(3)CH(3). Both the activation strain ΔE(≠)(strain) and the stabilizing interaction ΔE(≠)(int) jointly affect the activation energy ΔE(≠). For the C-H cleavage of substrate CH(3)X, with the decrease of steric shielding for the substituted CH(3)X (X = F > H > CH(3) > NO(2) > CN) attacking the O center in Q, the activation strain ΔE(≠)(strain) decreases, whereas the stabilizing interaction ΔE(≠)(int) increases. It is predicted that the MMO with peroxo dizinc Zn(2)O(2) core should be a promising catalyst for the hydroxylation of methane and its derivatives.
Subject(s)
Methane/chemistry , Oxygenases/chemistry , Zinc/chemistry , Biocatalysis , Enzyme Activation , Hydroxylation , Methane/analogs & derivatives , Methane/metabolism , Models, Molecular , Molecular Structure , Oxygenases/metabolism , Substrate SpecificityABSTRACT
The reaction mechanism of the gas-phase Pt atom with C(3)H(8) has been systematically investigated on the singlet and triplet potential energy surfaces at CCSD(T)//BPW91/6-311++G(d, p), Lanl2dz level. Pt atom prefers the attack of primary over secondary C-H bonds in propane. For the Pt + C(3)H(8) reaction, the major and minor reaction channels lead to PtC(3)H(6) + H(2) and PtCH(2) + C(2)H(6), respectively, whereas the possibility to form products PtC(2)H(4) + CH(4) is so small that it can be neglected. The minimal energy reaction pathway for the formation of PtC(3)H(6) + H(2), involving one spin inversion, prefers to start at the triplet state and afterward proceed along the singlet state. The optimal C-C bond cleavages are assigned to C-H bond activation as the first step, followed by cleavage of a C-C bond. The C-H insertion intermediates are kinetically favored over the C-C insertion intermediates. From C-C to C-H oxidative insertion, the lowering of activation barrier is mainly caused by the more stabilizing transition state interaction ΔE(≠) (int), which is the actual interaction energy between the deformed reactants in the transition state.
Subject(s)
Models, Chemical , Propane/chemistryABSTRACT
A W4 C2 cluster was used to model a W2 C catalyst with the armchair model of activated carbon support, noted as W4 C2 /AC. Over W4 C2 /AC, the mechanism for the hydrogenation of both -H2 OH and -CHO groups in 5-hydroxymethylfurfural (HMF) was theoretically studied in tetrahydrofuran at GGA-PBE/DNP level. 5-Methylfurfural was the major product from only hydrodehydration of the -CH2 OH group, whereas 2,5-dihydroxymethylfuran was the minor product from the hydrogenation of both -CH2 OH and -CHO groups. The rate-determining steps were concerned with the -C(H)2 -H bond formation for the hydrodehydration of -CH2 OH group, and the -(OH)(H)-H bond formation for the hydrogenation of -CHO group. Kinetically, W-sites promoted the hydrodehydration of -CH2 OH group and inhibited the hydrogenation of -CHO group. This stemmed from the strong Lewis acidity of W-sites, which easily accepted the lone-pair electrons of the oxygen atom in the -C(OH)(H)- group, making -C(OH)(H)-H bond formation hard, and hampering the hydrogenation of the -CHO group.
Subject(s)
Aldehydes , Oxygen , Catalysis , Furaldehyde/analogs & derivatives , Hydrogenation , Oxygen/chemistryABSTRACT
OBJECTIVE: To investigate the clinical effect of NRD assisted Ilizarov technique in the treatment of infected bone and soft tissue defect of tibia. METHODS: All 48 patients with infected bone and soft tissue defect of tibia were randomly divided into study group and control group from March 2013 to December 2020. There were 34 males and 14 females, aged from 24 to 55 years old with an average of (40.54±11.64) years old. There were 25 patients in the study group, including 17 males and 8 females, aged from 31 to 55 years old with an average of (41.36±9.69) years old. The study group were treated with NRD assisted with Ilizarov bone transport technique. There were 23 patients in control group, including 17 males and 6 females, aged from 24 to 53 years old with an average of(38.61±8.76) years old. The control group were treated with traditional bone transport technique. The curative rate, recurrence rate, incidence rate of pin track infection, time of using antibiotics, time of wound healing, time of carrying external fixation, time of bone transport, time of bone healing and postoperative function were used to evaluate the therapeutic effect of the two groups. RESULTS: The follow-up period was from 12 to 62 months with an average of (33.0±7.2) months. At the final follow-up, there was no significant difference in the curative rate between the two groups (P>0.05). The recurrence rate in the study group was lower than that in the control group(P<0.05). The incidence of pin track infection in the study group was lower than that in the control group (P<0.05). The time of using antibiotics and wound healing in the study group was shorter than that in the control group(P<0.05). There was no significant difference in the time of bone transport and carrying of external fixation between the two groups(P>0.05). There was no significant difference in bone healing and postoperative function between the two groups(P>0.05). CONCLUSION: NRD assisted Ilizarov technique can achieve satisfactory results in the treatment of infected bone and soft tissue defect of tibia and shorten the treatment period and the time of using antibiotics. It is worthy of development in clinic.
Subject(s)
Ilizarov Technique , Tibial Fractures , Male , Female , Humans , Young Adult , Adult , Middle Aged , Tibia/surgery , Tibial Fractures/surgery , Wound Healing , Anti-Bacterial Agents , Treatment Outcome , Retrospective Studies , External FixatorsABSTRACT
AIM: To evaluate the therapeutic effect of amniotic membrane (AM) for covering high myopic macular hole associated with retinal detachment following failed primary surgery. METHODS: Seventeen eyes of 17 patients whose axial length was more than 29 mm suffered from macular hole (MH) or MH associated with retinal detachment (RD), and had previously surgery of pars plana vitrectomy (PPV) with internal limiting membrane (ILM) peeling and silicone oil (SO) tamponade. Half a year after the surgery, optical coherence tomography (OCT) showed that MH did not heal in all 17 eyes and RD was still maintained in 13 eyes of these 17 eyes. We performed SO removal combined with AM covering on macular area and C3F8 tamponade, and phacoemulsification combined with intraocular lens implantation simultaneously cataract eyes. We followed up these patients for one year. RESULTS: In all 17 eyes, SO was removed successfully, MHs were healed and RDs were reattached. One eye (5.89%, 1/17) had AM shifted half a month after surgery and underwent a second surgery to adjust the position of the AM and supplement C3F8. After surgery, the visual acuity (VA) improved in 15 eyes (88.24%, 15/17), no change in two eyes (11.76%, 2/17). No serious complications occurred in all eyes. CONCLUSION: AM covering is helpful to rescue the previous failure surgery of high myopic MH.
ABSTRACT
Chimeric antigen receptor T (CAR-T) cell therapy is an effective treatment for relapsed and refractory acute lymphoblastic leukemia (R/R ALL). However, autologous CAR-T cells derived from patients with B-ALL often show poor amplification ability, exhaustion, and anergy. To overcome these limitations, allogeneic CAR-T cells may be used as effective substitutes; however, which source would be the best substitute is unclear. In this study, we compared the immunophenotype and antitumor efficacy of anti-CD19 CAR-T cells derived from healthy donor cord blood (CB), healthy donor peripheral blood (PB), and PB of B-ALL patients [PB (patient)] in vitro and NOD-Prkdcem26cd52Il2rgem26Cd22/Nju (NCG)-immunodeficient mice, respectively. The results revealed that CAR-T cells derived from healthy donor CB and PB showed a higher proportion of naive T cells and longer tumor suppression in tumor-bearing mice than those of PB (patient). PB (patient) CAR-T cells had a higher proportion of regulatory T cells (Treg cells) and released high levels of interluekin-10 (IL-10), which also suggest a poor prognosis. Thus, CAR-T cells derived from healthy donors have better antitumor efficacy than CAR-T cells derived from PB (patient), and CB may be a good source of allogeneic CAR-T cells.
ABSTRACT
The gas-phase reaction mechanism between palladium monoxide and methane has been theoretically investigated on the singlet and triplet state potential energy surfaces (PESs) at the CCSD(T)/AVTZ//B3LYP/6-311+G(2d, 2p), SDD level. The major reaction channel leads to the products PdCH(2) + H(2)O, whereas the minor channel results in the products Pd + CH(3)OH, CH(2)OPd + H(2), and PdOH + CH(3). The minimum energy reaction pathway for the formation of main products (PdCH(2) + H(2)O), involving one spin inversion, prefers to start at the triplet state PES and afterward proceed along the singlet state PES, where both CH(3)PdOH and CH(3)Pd(O)H are the critical intermediates. Furthermore, the rate-determining step is RS-CH(3) PdOH â RS-2-TS1cb â RS-CH(2)Pd(H)OH with the rate constant of k = 1.48 × 10(12) exp(-93,930/RT). For the first C-H bond cleavage, both the activation strain ΔE(≠)(strain) and the stabilizing interaction ΔE(≠)(int) affect the activation energy ΔE(≠), with ΔE(≠)(int) in favor of the direct oxidative insertion. On the other hand, in the PdCH(2) + H(2) O reaction, the main products are Pd + CH(3)OH, and CH(3)PdOH is the energetically preferred intermediate. In the CH(2)OPd + H(2) reaction, the main products are Pd + CH(3)OH with the energetically preferred intermediate H(2)PdOCH(2). In the Pd + CH(3)OH reaction, the main products are CH(2)OPd + H(2), and H(2)PdOCH(2) is the energetically predominant intermediate. The intermediates, PdCH(2), H(2) PdCO, and t-HPdCHO are energetically preferred in the PdC + H(2), PdCO + H(2), and H(2)Pd + CO reactions, respectively. Besides, PdO toward methane activation exhibits higher reaction efficiency than the atom Pd and its first-row congener NiO.
Subject(s)
Methane/chemistry , Palladium/chemistry , Quantum Theory , Gases/chemistryABSTRACT
Vanadium-containing catalysts exhibit good catalytic activity toward the aerobic oxidation of 5-hydroxymethylfurfural (HMF) to 2,5-diformyfuran (DFF). The aerobic oxidation mechanism of HMF to DFF catalyzed by VO2 + with counterpart anion in N,N-dimethylacetamide (DMA) solution have been theoretically investigated. In DMA solution, the stable VO2 +-containing complex is the four-coordinated [V(O)2(DMA)2]+ species. For the gross reaction of 2HMF + O2 â 2DFF + 2H2O, there are three main reaction stages, i.e., the oxidation of the first HMF to DFF with the reduction of [V(O)2(DMA)2]+ to [V(OH)2(DMA)]+, the aerobic oxidation of [V(OH)2(DMA)]+ to the peroxide [V(O)3(DMA)]+, and the oxidation of the second HMF to DFF with the reduction of [V(O)3(DMA)]+ to [V(O)2(DMA)2]+. The rate-determining reaction step is associated with the C-H bond cleavage of -CH2 group of the first HMF molecule. The peroxide [V(O)3(DMA)]+ species exhibits better oxidative activity than the initial [V(O)2(DMA)2]+ species, which originates from its narrower HOMO-LUMO gap. The counteranion Cl- exerts promotive effect on the aerobic oxidation of HMF to DFF catalyzed by [V(O)2(DMA)2]+ species.
ABSTRACT
The gas-phase reaction mechanism between methane and rhodium monoxide for the formation of methanol, syngas, formaldehyde, water, and methyl radical have been studied in detail on the doublet and quartet state potential energy surfaces at the CCSD(T)/6-311+G(2d, 2p), SDD//B3LYP/6-311+G(2d, 2p), SDD level. Over the 300-1100 K temperature range, the branching ratio for the Rh((4)F) + CH(3)OH channel is 97.5-100%, whereas the branching ratio for the D-CH(2)ORh + H(2) channel is 0.0-2.5%, and the branching ratio for the D-CH(2)ORh + H(2) channel is so small to be ruled out. The minimum energy reaction pathway for the main product methanol formation involving two spin inversions prefers to both start and terminate on the ground quartet state, where the ground doublet intermediate CH(3)RhOH is energetically preferred, and its formation rate constant over the 300-1100 K temperature range is fitted by k(CH3RhOH) = 7.03 x 10(6) exp(-69.484/RT) dm(3) mol(-1) s(-1). On the other hand, the main products shall be Rh + CH(3)OH in the reactions of RhO + CH(4), CH(2)ORh + H(2), Rh + CO +2H(2), and RhCH(2) + H(2)O, whereas the main products shall be CH(2)ORh + H(2) in the reaction of Rh + CH(3)OH. Meanwhile, the doublet intermediates H(2)RhOCH(2) and CH(3)RhOH are predicted to be energetically favored in the reactions of Rh + CH(3)OH and CH(2)ORh + H(2) and in the reaction of RhCH(2) + H(2)O, respectively.
ABSTRACT
The stable tetrahedral derivative Ni(PF(3))(4) is reported to generate binuclear Ni(2)(PF(3))(n) ions in its mass spectrum emerging from ion-molecule reactions. Theoretical studies on such binuclear complexes indicate Ni(2)(PF(3))(7) to be energetically unfavorable with respect to decomposition into Ni(PF(3))(4) + Ni(PF(3))(3). However, viable rather unsymmetrical structures with two PF(3) bridges for Ni(2)(PF(3))(n) (n = 6, 5, 4) are reported here as well as a triply semibridged Ni(2)(PF(3))(5) structure. The nickel-nickel distances in these Ni(2)(PF(3))(n) derivatives suggest a formal double bond (2.51 A), a formal triple bond (2.26 A), and a formal double bond (2.34 A) for n = 6, 5, and 4, respectively. The mononuclear Ni(PF(3))(n) derivatives are predicted to have tetrahedral, trigonal planar, and bent (139 degrees ) structures for n = 4, 3, and 2, respectively.
Subject(s)
Nickel/chemistry , Organometallic Compounds/chemistry , Phosphines/chemistry , Ligands , Models, Molecular , Molecular Dynamics SimulationABSTRACT
The comprehensive mechanism survey on the gas-phase reaction between nickel monoxide and methane for the formation of syngas, formaldehyde, methanol, water, and methyl radical has been investigated on the triplet and singlet state potential energy surfaces at the B3LYP/6-311++G(3df, 3pd)//B3LYP/6-311+G(2d, 2p) levels. The computation reveals that the singlet intermediate HNiOCH(3) is crucial for the syngas formation, whereas two kinds of important reaction intermediates, CH(3)NiOH and HNiOCH(3), locate on the deep well, while CH(3)NiOH is more energetically favorable than HNiOCH(3) on both the triplet and singlet states. The main products shall be syngas once HNiOCH(3) is created on the singlet state, whereas the main products shall be methyl radical if CH(3)NiOH is formed on both singlet and triplet states. For the formation of syngas, the minimal energy reaction pathway (MERP) is more energetically preferable to start on the lowest excited singlet state other than on the ground triplet state. Among the MERP for the formation of syngas, the rate-determining step (RDS) is the reaction step for the singlet intermediate HNiOCH(3) formation involving an oxidative addition of NiO molecule into the C-H bond of methane, with an energy barrier of 120.3 kJ mol(-1). The syngas formation would be more effective under higher temperature and photolysis reaction condition.