Pushing the Limits of Capacitively Coupled Contactless Conductivity Detection for Capillary Electrophoresis.

Capillary electrophoresis with capacitively coupled contactless conductivity detection (CE-C4D) has proven to be an efficient technique for the separation and detection of charged inorganic, organic, and biochemical analytes. It offers several advantages, including cost-effectiveness, nanoliter injection volume, short analysis time, good separation efficiency, suitability for miniaturization, and portability. However, the routine determination of common inorganic cations (NH4+, K+, Na+, Ca2+, Mg2+, and Li+) and inorganic anions (F-, Cl-, Br-, NO2-, NO3-, PO43-, and SO42-) in water quality monitoring typically exhibits limits of detection of about 0.3-1 µM without preconcentration. This sensitivity often proves insufficient for the applications of CE-C4D in trace analysis situations. Here, we explore methods to push the detection limits of CE-C4D through a comprehensive consideration of signal and noise sources. In particular, we (i) studied the model of C4D and its guiding roles in C4D and CE-C4D, (ii) optimized the bandwidth and noise performance of the current-to-voltage (I-V) converter, and (iii) reduced the noise level due to the strong background signal of the background electrolyte by adaptive differential detection. We characterized the system with Li+; the 3-fold signal-to-noise (S/N) detection limit for Li+ was determined at 20 nM, with a linear range spanning from 60 nM to 1.6 mM. Moreover, the optimized CE-C4D method was applied to the analysis of common mixed inorganic cations (K+, Na+, Ca2+, Mg2+, and Li+), anions (F-, Cl-, Br-, NO2-, NO3-, PO43-, and SO42-), toxic halides (BrO3-) and heavy metal ions (Pb2+, Cd2+, Cr3+, Co2+, Ni2+, Zn2+, and Cu2+) at trace concentrations of 200 nM. All electropherograms showed good S/N ratios, thus proving its applicability and accuracy. Our results have shown that the developed CE-C4D method is feasible for trace ion analysis in water quality control.

Correction: A compact and high-performance setup of capillary electrophoresis with capacitively coupled contactless conductivity detection (CE-C4D).

Correction for 'A compact and high-performance setup of capillary electrophoresis with capacitively coupled contactless conductivity detection (CE-C4D)' by Lin Li et al., Analyst, 2024, https://doi.org/10.1039/d4an00354c.

A compact and high-performance setup of capillary electrophoresis with capacitively coupled contactless conductivity detection (CE-C4D).

Capillary electrophoresis with capacitively coupled contactless conductivity detection (CE-C4D) has the advantages of high throughput (simultaneous detection of multiple ions), high separation efficiency (higher than 105 theoretical plates) and rapid analysis capability (less than 5 min for common inorganic ions). A compact CE-C4D system is ideal for water quality control and on-site analysis. It is suitable not only for common cations (e.g. Na+, K+, Li+, NH4+, Ca2+, etc.) and anions (e.g. Cl-, SO42-, BrO3-, etc.) but also for some ions (e.g. lanthanide ions, Pb2+, Cd2+, etc.) that require complex derivatization procedures to be detected by ion chromatography (IC). However, an obvious limitation of the CE-C4D method is that its sensitivity (e.g. 0.3-1 µM for common inorganic ions) is often insufficient for trace analysis (e.g. 1 ppb or 20 nM level for common inorganic ions) without preconcentration. For this technology to become a powerful and routine analytical technique, the system should be made compact while maintaining trace analysis sensitivity. In this study, we developed an all-in-one version of the CE-C4D instrument with custom-made modular components to make it a convenient, compact and high-performance system. The system was designed using direct digital synthesis (DDS) technology to generate programmable sinusoidal waveforms with any frequency for excitation, a kilovolt high-voltage power supply for capillary electrophoresis separation, and an "effective" differential C4D cell with a low-noise circuitry for high-sensitivity detection. We characterized the system with different concentrations of Cs+, and even a low concentration of 20 nM was detectable without preconcentration. Moreover, the optimized CE-C4D setup was applied to analyse mixed ions at a trace concentration of 200 nM with excellent signal-to-noise ratios. In typical applications, the limits of detection based on the 3σ criterion (without baseline filtering) were 9, 10, 24, 5, and 12 nM for K+, Cs+, Li+, Ca2+, and Mg2+, respectively, and about 7, 6, 6 and 6 nM for Br-, ClO4-, BrO3- and SO42-, respectively. Finally, the setup was also applied for the analysis of all 14 lanthanide ions and rare-earth minerals, and it showed an improvement in sensitivity by more than 25 times.

Atomic Force Microscopy Based Top-Illumination Electrochemical Tip-Enhanced Raman Spectroscopy.

Electrochemical tip-enhanced Raman spectroscopy (EC-TERS) is a powerful technique for the in situ study of the physiochemical properties of the electrochemical solid/liquid interface at the nanoscale and molecular level. To further broaden the potential window of EC-TERS while extending its application to opaque samples, here, we develop a top-illumination atomic force microscopy (AFM) based EC-TERStechnique by using a water-immersion objective of a high numerical aperture to introduce the excitation laser and collect the signal. This technique not only extends the application of EC-TERS but also has a high detection sensitivity and experimental efficiency. We coat a SiO2 protection layer over the AFM-TERS tip to improve both the mechanical and chemical stability of the tip in a liquid TERS experiment. We investigate the influence of liquid on the tip-sample distance to obtain the highest TERS enhancement. We further evaluate the reliability of the as-developed EC-AFM-TERS technique by studying the electrochemical redox reaction of polyaniline. The top-illumination EC-AFM-TERS is promising for broadening the application of EC-TERS to more practical systems, including energy storage and (photo)electrocatalysis.

Electrochemical Tip-Enhanced Raman Spectroscopy with Improved Sensitivity Enabled by a Water Immersion Objective.

Electrochemical tip-enhanced Raman spectroscopy (EC-TERS) appears as a promising in situ nanospectroscopic tool for characterization and understanding of the electrochemical interfacial processes at the nanometer scale and molecular level. However, the wide application of EC-TERS is hampered by its low sensitivity as a result of the optical path distortion due to the refractive index mismatch of the multilayer media (air, glass, and electrolyte). Here, we propose a new side-illumination EC-TERS setup by coupling a water immersion objective with a high numerical aperture to a scanning tunneling microscope scanning head customized with a large open space and a compact spectroelectrochemical cell. It not only effectively eliminates the optical distortion but also increases the sensitivity remarkably, which allows sensitive monitoring of the electrochemical redox processes of anthraquinone molecules. More importantly, EC-TERS is able to independently control the tip position and laser illumination position. By utilizing this feature, we reveal that the irreversible reduction reaction of anthraquinone observed in EC-TERS is induced by the synergistic effect of the negative potential and laser illumination rather than the localized surface plasmon. The highly improved sensitivity and the flexibility to control the tip and laser illumination position on the nanometer scale endows EC-TERS as an important tool for the fundamental understanding of the photo- or plasmon electrochemistry and the interfacial structure-activity relationship of important electrochemical systems.

Internal mammary artery injury during percutaneous coronary intervention: a case report.

BACKGROUND: Percutaneous coronary intervention (PCI) is widely used to treat coronary artery disease (CAD). However, complications of PCI are inevitable. Internal mammary artery (IMA) injury is an infrequent but potentially lethal complication of PCI. CASE PRESENTATION: A 78-year-old man was diagnosed with multivessel lesions by coronary angiography. The IMA was injured during PCI, then cured by early identification and active rescue. CONCLUSIONS: This is the first reported case, to our knowledge, of injury to the IMA during PCI. We we report this case to discuss how to treat this injury effectively and avoid this complication during clinical therapy.

Tip-enhanced Raman spectroscopy for surfaces and interfaces.

Surface and interfaces play key roles in heterogeneous catalysis, electrochemistry and photo(electro)chemistry. Tip-enhanced Raman spectroscopy (TERS) combines plasmon-enhanced Raman spectroscopy with scanning probe microscopy to simultaneously provide a chemical fingerprint and morphological information for the sample at the nanometer spatial resolution. It is an ideal tool for achieving an in-depth understanding of the surface and interfacial processes, so that the relationship between structure and chemical performance can be established. We begin with the background of surfaces and interfaces and TERS, followed by a detailed discussion on some issues in experimental TERS, including tip preparation and TERS instrument configuration. We then focus on the progress of TERS for studying the surfaces and interfaces under different conditions, from ambient, to UHV, solid-liquid and electrochemical environments, followed by a brief introduction to the current understanding of the unprecedented high spatial resolution and surface selection rules. We conclude by discussing the future challenges for TERS practical applications in surfaces and interfaces.

Elucidating Protein/Ligand Recognition with Combined Surface Plasmon Resonance and Surface Enhanced Raman Spectroscopy.

The ability to distinguish between specific and nonspecific binding is important for assessing the interactions between protein receptors and ligands. Surface plasmon resonance (SPR) spectroscopy is an advanced tool to measure binding events, yet the ability to distinguish between specific and nonspecific binding remains a limitation. To address this problem, we use SPR spectroscopy correlated with surface enhanced Raman scattering (SERS). The chemical information present in SERS spectra provides insight into the molecular interactions between functionalized nanoparticles and proteins, which are not detectable by SPR alone. Using a custom instrument with the Kretschmann configuration, we successfully demonstrate simultaneous affinity and the chemical characterization of streptavidin-functionalized gold nanoparticles (STV-NPs) binding to biotin immobilized on a gold film in both air and flowing phosphate buffered saline (PBS). The SPR performance is consistent with that of previous reports. The association constant (KA) for streptavidin/biotin and STV-NPs/biotin interactions observed (2 ± 1 × 107 M-1 and 2.4 ± 0.3 × 1010 M-1, respectively) agree with literature values and show a strong avidity effect associated with the STV-NPs. The SERS scattering from STV-NPs is excited by the surface plasmon polariton and collected from an objective lens mounted over the fluidic channel. The SERS spectra are recorded simultaneously with the SPR sensorgram, and the detected Raman bands provide chemical insight into the binding event. Multivariate curve resolution analysis of the spectra can differentiate specific from nonspecific binding. This label-free, real time, and surface sensitive detection method provides chemical information to protein/ligand binding affinity measurements.

Novel Electrochemical Raman Spectroscopy Enabled by Water Immersion Objective.

Electrochemical Raman spectroscopy is a powerful molecular level diagnostic technique for in situ investigation of adsorption and reactions on various material surfaces. However, there is still a big room to improve the optical path to meet the increasing request of higher detection sensitivity and spatial resolution. Herein, we proposed a novel electrochemical Raman setup based on a water immersion objective. It dramatically reduces mismatch of the refractive index in the light path. Consequently, significant improvement in detection sensitivity and spatial resolution has been achieved from both Zemax simulation and the experimental results. Furthermore, the thickness of electrolyte layer could be expanded to 2 mm without any influence on the signal collection. Such a thick electrolyte layer allows a much normal electrochemical response during the spectroelectrochemical investigations of the methanol oxidation.

Electrochemical Tip-Enhanced Raman Spectroscopy.

Interfacial properties are highly important to the performance of some energy-related systems. The in-depth understanding of the interface requires highly sensitive in situ techniques that can provide fingerprint molecular information at nanometer resolution. We developed an electrochemical tip-enhanced Raman spectroscopy (EC-TERS) by introduction of the light horizontally to the EC-STM cell to minimize the optical distortion and to keep the TERS measurement under a well-controlled condition. We obtained potential-dependent EC-TERS from the adsorbed aromatic molecule on a Au(111) surface and observed a substantial change in the molecule configuration with potential as a result of the protonation and deprotonation of the molecule. Such a change was not observable in EC-SERS (surface-enhanced), indicating EC-TERS can more faithfully reflect the fine interfacial structure than EC-SERS. This work will open a new era for using EC-TERS as an important nanospectroscopy tool for the molecular level and nanoscale analysis of some important electrochemical systems including solar cells, lithium ion batteries, fuel cells, and corrosion.

Tip-enhanced Raman spectroscopy: tip-related issues.

After over 15 years of development, tip-enhanced Raman spectroscopy (TERS) is now facing a very important stage in its history. TERS offers high detection sensitivity down to single molecules and a high spatial resolution down to sub-nanometers, which make it an unprecedented nanoscale analytical technique offering molecular fingerprint information. The tip is the core element in TERS, as it is the only source through which to support the enhancement effect and provide the high spatial resolution. However, TERS suffers and will continue to suffer from the limited availability of TERS tips with a high enhancement, good stability, and high reproducibility. This review focuses on the tip-related issues in TERS. We first discuss the parameters that influence the enhancement and spatial resolution of TERS and the possibility to optimize the performance of a TERS system via an in-depth understanding of the enhancement mechanism. We then analyze the methods that have been developed for producing TERS tips, including vacuum-based deposition, electrochemical etching, electrodeposition, electroless deposition, and microfabrication, with discussion on the advantages and weaknesses of some important methods. We also tackle the issue of lifetime and protection protocols of TERS tips which are very important for the stability of a tip. Last, some fundamental problems and challenges are proposed, which should be addressed before this promising nanoscale characterization tool can exert its full potential. Graphical Abstract ᅟ.

Calibration of the oscillation amplitude of quartz tuning fork-based force sensors with astigmatic displacement microscopy.

Quartz tuning forks and qPlus-based force sensors offer an alternative approach to silicon cantilevers for investigating tip-sample interactions in scanning probe microscopy. The high-quality factor (Q) and stiffness of these sensors prevent the tip from jumping to the contact, even at sub-nanometer amplitude. The qPlus configuration enables simultaneous scanning tunneling microscopy and atomic force microscopy, achieving spatial resolution and spectroscopy at the subatomic level. However, to enable precise measurement of tip-sample interaction forces, confidence in these measurements is contingent upon the accurate calibration of the spring constant and oscillation amplitude of the sensor. Here, we have developed a method called astigmatic displacement microscopy with picometer sensitivity.

Anticipation and Verification of Dendrobium-Derived Nanovesicles for Skin Wound Healing Targets, Predicated Upon Immune Infiltration and Senescence.

Background: Dendrobium, with profound botanical importance, reveals a rich composition of bioactive compounds, including polysaccharides, flavonoids, alkaloids, and diverse amino acids, holding promise for skin regeneration. However, the precise mechanism remains elusive. Seeking a potent natural remedy for wound healing, exocyst vesicles were successfully isolated from Dendrobium. Aims of the Study: This investigation aimed to employ bioinformatics and in vivo experiments to elucidate target genes of Dendrobium-derived nanovesicles in skin wound healing, focusing on immune infiltration and senescence characteristics. Materials and Methods: C57 mice experienced facilitated wound healing through Dendrobium-derived nanovesicles (DDNVs). Bioinformatics analysis and GEO database mining identified crucial genes by intersecting immune-related, senescence-related, and PANoptosis-associated genes. The identified genes underwent in vivo validation. Results: DDNVs remarkably accelerated skin wound healing in C57 mice. Bioinformatics analysis revealed abnormal expression patterns of immune-related, senescence-related, and pan-apoptosis-related genes, highlighting an overexpressed IL-1ß and downregulated IL-18 in the model group, Exploration of signaling pathways included IL-17, NF-kappa B, NOD-like receptor, and Toll-like receptor pathways. In vivo experiments confirmed DDNVs' efficacy in suppressing IL-1ß expression, enhancing wound healing. Conclusion: Plant-derived nanovesicles (PDNV) emerged as a natural, reliable, and productive approach to wound healing. DDNVs uptake by mouse skin tissues, labeled with a fluorescent dye, led to enhanced wound healing in C57 mice. Notably, IL-1ß overexpression in immune cells and genes played a key role. DDNVs intervention effectively suppressed IL-1ß expression, accelerating skin wound tissue repair.

Development of a cost-effective confocal Raman microscopy with high sensitivity.

Confocal Raman microscopy is a powerful technique for identifying materials and molecular species; however, the signal from Raman scattering is extremely weak. Typically, handheld Raman instruments are cost-effective but less sensitive, while high-end scientific-grade Raman instruments are highly sensitive but extremely expensive. This limits the widespread use of Raman technique in our daily life. To bridge this gap, we explored and developed a cost-effective yet highly sensitive confocal Raman microscopy system. The key components of the system include an excitation laser based on readily available laser diode, a lens-grating-lens type spectrometer with high throughput and image quality, and a sensitive detector based on a linear charge-coupled device (CCD) that can be cooled down to -30 °C. The developed compact Raman instrument can provide high-quality Raman spectra with good spectral resolution. The 3rd order 1450 cm-1 peak of Si (111) wafer shows a signal-to-noise ratio (SNR) better than 10:1, demonstrating high sensitivity comparable to high-end scientific-grade Raman instruments. We also tested a wide range of different samples (organic molecules, minerals and polymers) to demonstrate its universal application capability.

Development of alternative herbals remedy for gastric cancer based on transcriptomic analysis of immune infiltration and ferroptosis.

Objective: Screening out potential herbal medicines and herbal ingredients for the treatment of gastric cancer based on transcriptomic analysis of immune infiltration and ferroptosis. Methods: Gene expression profiles of gastric tumour tissues and normal tissue samples were obtained from the GEO database and the samples were analysed for immune cell infiltration condition and differential expressed genes of ferroptosis. Key genes were screened by protein-protein interaction (PPI) and enrichment analysis, and molecular docking was used to predict and preliminary validate potential herbal and traditional Chinese medicine components for gastric cancer based on the key genes. Finally, RT-QPCR was used to validate the prediction results. Results: Immune cell infiltration analysis revealed high levels of infiltration of activated CD4 memory T cells, monocytes, M0 macrophages in gastric tumor tissues, while plasma cells and resting mast cells had higher levels of infiltration in the paraneoplastic tissues. Differential gene expression analysis identified 1,012 upregulated genes and 880 downregulated genes, of which 84 immune related differentially expressed genes such as CTSB, PGF and PLAU and 10 ferroptosis-related differentially expressed genes such as HSF1, NOX4 and NF2 were highly expressed in gastric cancer tissues. The results of enrichment analysis showed that they mainly involve 343 biological processes such as extracellular matrix organization and extracellular structural organization; 37 cellular components such as complexes of collagen trimer and basement membrane; 35 molecular functions such as signal receptor activator activity and receptor ligand activity; 19 regulatory pathways such as cytokine-cytokine receptor interactions and retinol metabolism. Finally, two key genes, TLR4 and KRAS, were selected and 12 herbal medicines such as Radix Salviae liguliobae, Rhizoma Coptidis, Rhizoma Polygoni cuspidati and 27 herbal ingredients such as resveratrol, salvianolic acid b were predicted on the basis of key genes. Molecular docking results showed that KRAS binds tightly to coumarin and magnolol, while TLR4 can bind tightly to resveratrol, curcumin, salvianolic acid b, shikonin. Subsequently, the effect of resveratrol and magnolol was experimentally verified. Conclusion: Herbal medicines such as S. liguliobae, Rhizoma Coptidis, Rhizoma P. cuspidati and herbal ingredients such as resveratrol, curcumin, salvianolic acid b may provide research directions and alternative therapeutic approaches for immunomodulation of TME and ferroptosis of tumour cells in gastric cancer.

Flexible optical limiters based on Cu3VSe4 nanocrystals.

Optical limiters are greatly needed to protect eyes and sensitive optoelectronic devices such as photodetectors and sensors from laser damage, but they are currently plagued by low efficiency. In this work, we utilized Cu3VSe4 nanocrystals (NCs) to enhance laser protection performance, and they exhibit higher saturation intensity and broader nonlinear spectral response extending into the near IR region than the C60 benchmark. A flexible optical limiter goggle prototype based on the NCs significantly attenuated the incident laser beam, with Z scan and I scan measurements demonstrating a giant nonlinear absorption coefficient ß value of 1.0 × 10-7 m W-1, a large optical damage threshold of 3.5 J cm-2, and a small starting threshold of 0.22 J cm-2. Transient absorption spectroscopy disclosed that the origin of the excellent nonlinearity was associated with quasi-static dielectric resonance behavior and a large TPA cross-section of 3.3 × 106 GM was measured for Cu3VSe4 NCs, suggesting the potential of intermediate bandgap (IB) semiconductors as alternatives to plasmonic noble metals for ultrafast photonics. Hence, optical limiters based on such semiconductors offer new avenues for laser protection in optoelectronic and defense fields.

Prediction of herbal medicines based on immune cell infiltration and immune- and ferroptosis-related gene expression levels to treat valvular atrial fibrillation.

Inflammatory immune response is apparently one of the determinants of progressive exacerbation of valvular atrial fibrillation(VAF). Ferroptosis, an iron-dependent modality of regulated cell death, is involved in the immune regulation of cardiovascular disease. However, the relevant regulatory mechanisms of immune infiltration and ferroptosis in VAF have been less studied. In the current study, a highly efficient system for screening immunity- and ferroptosis-related biomarkers and immunomodulatory ability of herbal ingredients has been developed with the integration of intelligent data acquisition, data mining, network pharmacology, and computer-assisted target fishing. VAF patients showed higher infiltration of neutrophils and resting stage dendritic cells, while VSR patients showed higher infiltration of follicular helper T cells. In addition, six (e.g., PCSK2) and 47 (e.g., TGFBR1) ImmDEGs and one (SLC38A1) and four (TGFBR1, HMGB1, CAV1, and CD44) FerDEGs were highly expressed in patients with valvular sinus rhythm (VSR) and VAF, respectively. We further identified a core subnetwork containing 34 hub genes, which were intersected with ImmDEGs and FerDEGs to obtain the key gene TGFBR1. Based on TGFBR1, 14 herbs (e.g., Fructus zizyphi jujubae, Semen Juglandis, and Polygonum cuspidatum) and six herbal ingredients (curcumin, curcumine, D-glucose, hexose, oleovitamin A, and resveratrol) were predicted. Finally, TGFBR1 was found to dock well with curcumin and resveratrol, and it was further verified that curcumin and resveratrol could significantly reduce myocardial fibrosis. We believe that herbs rich in curcumin and resveratrol such as Rhizoma curcumae longae and Curcuma kwangsiensis, mitigate myocardial fibrosis to improve VAF by modulating the TGFß/Smad signaling pathway. This strategy provides a prospective approach systemically characterizing phenotype-target-herbs relationships based on the tissue-specific biological functions in VAF and brings us new insights into the searching lead compounds from Chinese herbs.

Transcriptomic Analysis Uncovers Immunogenic Characteristics of Ferroptosis for Myocardial Infarction and Potential Therapeutic Prediction of Chinese Herbs.

Background: Inflammation and immune response play a key role in myocardial injury and repair after myocardial infarction (MI), while the relevant regulatory mechanisms of immune infiltration in MI have been fully explored. Ferroptosis is an iron-dependent form of regulated cell death characterized by an excessive accumulation of iron and lipid peroxides and involves in the pathogenesis of myocardial infarction. In the present study, by integrating intelligent data acquisition, data mining, network pharmacology, and computer-assisted target fishing, we developed a highly efficient system for screening immunity- and ferroptosis-related biomarkers and immunomodulatory ability of herbal ingredients. Results: Immune infiltration analysis of GSE97320 showed significant neutrophil infiltration in the myocardial infarction group compared to the healthy group, and 807 differentially expressed genes (DEGs) were obtained (526 up-regulated and 281 downregulated). Among these DEGs, 73 immune-related and 8 ferroptosis-related DEGs were obtained. Further protein-protein interaction network analysis revealed 30 hub genes. The DEGs were enriched in a total of 107 biological processes, of which neutrophil-related biological processes were the most significant, enriched in 31 cellular components such as bead-binding hemoglobin complex, hemoglobin complex, and enriched in 36 functions such as bead-binding hemoglobin complex and hemoglobin complex. The DEGs were also enriched in 21 KEGG pathways such as lipid-atherosclerosis and formation of neutrophil extracellular traps. Further analysis identified Toll-like receptor-4 (TLR4) as the key gene, and based on TLR4, 17 herbal ingredients and 6 herbal medicines were predicted by using HERB and Coremine databases. Further molecular docking analysis showed that TLR4 could bind to salvianolic acid b and stigmasterol. The molecular dynamics analysis revealed that TLR4 could bind to salvianolic acid b, stigmasterol, and resveratrol in the stable phase with the binding between TLR4 and salvianolic acid b being the most stable. Conclusions: TLR4 is a key gene that is related to ferroptosis and immune cell infiltration. Further analysis revealed that 17 herbal ingredients and 6 herbal medicines were predicted to have potential interactions with TLR4. These predicted herbal ingredients/medicines may act synergistically to protect against myocardial injury after MI through suppressing neutrophil extracellular traps. The protective effects may be associated with immune cell infiltration and ferroptosis.

Effects of a natural nutritional supplement on immune cell infiltration and immune gene expression in exercise-induced injury.

Inflammatory immune response plays a key role in exercise-induced injury and healing; however, the relevant regulatory mechanisms of immune infiltration in exercise-induced injuries remain less studied. In the present study, a highly efficient system for screening immunity-related biomarkers and immunomodulatory ability of natural nutritional supplements was developed by integrating intelligent data acquisition, data mining, network pharmacology, and computer-assisted target fishing. The findings demonstrated that resting natural killer cells showed a higher rate of infiltration after exercise, whereas naive B cells and activated dendritic cells showed higher rate of infiltration before exercise. Four key genes, namely PRF1, GZMB, CCL4, and FASLG, were associated with exercise-induced injuries and inflammatory immune response. In total, 26 natural compounds including echinacoside, eugenol, tocopherol, and casuariin were predicted by using the HERB databases. Molecular docking analysis showed that GZMB, FASLG, and CCL4 bound to echinacoside. In vivo experiments in mice showed that after 30 min swimming, natural killer (NK) cells showed high infiltration rates, and the key genes (GZMB, PRF1, FASLG, and CCL4) were highly expressed; however, echinocandin significantly reduced the level of NK cells and decreased the expression of the four key genes post exercise. This natural nutritional supplement may act to protect against inflammatory injury after exercise by suppressing specific immune infiltration.

After enjoying curry: urine metabolism analysis of curcuminoids by microemulsion electrokinetic chromatography with laser-induced native fluorescence detection.

Considering pH-dependent fluorescence of curcuminoids, a microemulsion electrokinetic chromatographic (MEEKC) method was developed under acidic conditions for their separation and detection using laser-induced native fluorescence (LINF), so as to solve the analysis of urine metabolism for curcuminoids. The microemulsion composition was optimized by response surface methodology (RSM), and the effects of buffer pH and organic modifiers were systematically investigated. The optimal buffer for the separation of curcuminoids was chosen as follows: 2.8% (v/v) ethyl acetate, 80 mM SDS and 2.8% (v/v) n-butanol to form microemulsion, 28% (v/v) ethanol as organic modifier, and 20 mM phosphoric acid as electrolyte at pH 3.0. Under these conditions, four curcuminoids including curcumin, demethoxy curcumin (DMC), bisdemethoxy curcumin (BDMC) and demethyl curcumin (DEC) could be well separated within 18 min, and the detection limits (LOD, based on S/N=3) were calculated to be 71, 60, 22, and 147 pg mL-1, respectively. Combined with solid-phase extraction (SPE), the developed MEEKC-LINF method has been successfully applied to continuously monitor the curcuminoids and related metabolites in human urine collected from a healthy volunteer after oral administration of curry, testifying that this method has potential for evaluating the pharmacological activity of curcuminoids.