CDK12 inhibition upregulates ATG7 triggering autophagy via AKT/FOXO3 pathway and enhances anti-PD-1 efficacy in colorectal cancer.

As the world's fourth most deadly cancer, colorectal cancer (CRC) still needed the novel therapeutic drugs and target urgently. Although cyclin-dependent kinase 12 (CDK12) has been shown to be implicated in the malignancy of several types of cancer, its functional role and mechanism in CRC remain largely unknown. Here, we found that suppression of CDK12 inhibited tumor growth in CRC by inducing apoptosis. And CDK12 inhibition triggered autophagy by upregulating autophagy related gene 7 (ATG7) expression. Inhibition of autophagy by ATG7 knockdown and chloroquine (CQ) further decreased cell viability induced by CDK12 inhibition. Further mechanism exploration showed that CDK12 interacted with protein kinase B (AKT) regulated autophagy via AKT/forkhead box O3 (AKT/FOXO3) pathway. FOXO3 transcriptionally upregulated ATG7 expression and autophagy when CDK12 inhibition in CRC. Level of CDK12 and p-FOXO3/FOXO3 ratio were correlated with survival in CRC patients. Moreover, CDK12 inhibition improved the efficacy of anti-programmed cell death 1(PD-1) therapy in CRC murine models by enhancing CD8 + T cells infiltration. Thus, our study founded that CDK12 inhibition upregulates ATG7 triggering autophagy via AKT/FOXO3 pathway and enhances anti-PD-1 efficacy in CRC. We revealed the roles of CDK12/FOXO3/ATG7 in regulating CRC progression, suggesting potential biomarkers and therapeutic target for CRC.

Dihydroartemisinin suppresses glioma growth by repressing ERRα-mediated mitochondrial biogenesis.

Malignant gliomas are an exceptionally lethal form of cancer with limited treatment options. Dihydroartemisinin (DHA), a sesquiterpene lactone antimalarial compound, has demonstrated therapeutic effects in various solid tumors. In our study, we aimed to investigate the mechanisms underlying the anticancer effects of DHA in gliomas. To explore the therapeutic and molecular mechanisms of DHA, we employed various assays, including cell viability, flow cytometry, mitochondrial membrane potential, glucose uptake and glioma xenograft models. Our data demonstrated that DHA significantly inhibited glioma cell proliferation in both temozolomide-resistant cells and glioma stem-like cells. We found that DHA-induced apoptosis occurred via the mitochondria-mediated pathway by initiating mitochondrial dysfunction before promoting apoptosis. Moreover, we discovered that DHA treatment substantially reduced the expression of the mitochondrial biogenesis-related gene, ERRα, in glioma cells. And the ERRα pathway is a critical target in treating glioma with DHA. Our results also demonstrated that the combination of DHA and temozolomide synergistically inhibited the proliferation of glioma cells. In vivo, DHA treatment remarkably extended survival time in mice bearing orthotopic glioblastoma xenografts. Thus, our findings suggest that DHA has a novel role in modulating cancer cell metabolism and suppressing glioma progression by activating the ERRα-regulated mitochondrial apoptosis pathway.

Ixazomib Induces Apoptosis and Suppresses Proliferation in Esophageal Squamous Cell Carcinoma through Activation of the c-Myc/NOXA Pathway.

Esophageal squamous cell carcinoma (ESCC) is one of the major subtypes of esophageal cancer. More than half of the patients with ESCC in the world are in China, and the 5-year survival rate is less than 10%. As a new oral proteasome inhibitor, ixazomib has shown strong therapeutic effect in many solid tumors. In this study, we aimed to investigate the effects of ixazomib on the proliferation inhibition and apoptosis of ESCC cells. We used four human ESCC cell lines, cell viability assay, cell cycle and apoptosis assay, reverse-transcription polymerase chain reaction (RT-PCR), Western blot, immunohistochemistry, and ESCC xenografts model to clarify the roles of the therapeutic effect and mechanism of ixazomib in ESCC. Ixazomib significantly inhibited the proliferation and induced apoptosis in ESCC cells. RT-PCR results showed that the expressions of endoplasmic reticulum stress-related gene phorbol-12-myristate-13-acetate-induced protein 1 (NOXA) and MYC proto-oncogene (c-Myc) significantly increase after treatment with ixazomib in ESCC cells. When we knocked down the NOXA and c-Myc by small interfering RNA, the therapeutic effect of ixazomib markedly decreased, which confirmed that c-Myc/NOXA pathway played a key role in the treatment of ESCC with ixazomib. In vivo, the xenograft ESCC model mice were given 10 mg/kg of ixazomib every other day for 30 days. The results showed that the tumor size in the treatment group was significantly smaller than the control group. These results suggested that ixazomib is known to suppress proliferation and induce apoptosis in ESCC cell lines, and this effect was likely mediated by increased activation of the c-Myc/NOXA signaling pathways. SIGNIFICANCE STATEMENT: Esophageal squamous cell carcinoma (ESCC) is the common worldwide malignant tumor, but conventional chemotherapeutics suffer from a number of limitations. In this study, the results suggested that ixazomib suppresses proliferation and induces apoptosis in ESCC cell lines. Therefore, ixazomib may be a potential new strategy for ESCC therapy.

The discovery of a novel series of potential ERRα inverse agonists based on p-nitrobenzenesulfonamide template for triple-negative breast cancer in vivo.

Oestrogen related receptor α participated in the regulation of oxidative metabolism and mitochondrial biogenesis, and was overexpressed in many cancers including triple-negative breast cancer. A set of new ERRα inverse agonists based on p-nitrobenzenesulfonamide template were discovered and compound 11 with high potent activity (IC50 = 0.80 µM) could significantly inhibit the transcription of ERRα-regulated target genes. By regulating the downstream signalling pathway, compound 11 could suppress the migration and invasion of the ER-negative MDA-MB-231 cell line. Furthermore, compound 11 demonstrated a significant growth suppression of breast cancer xenograft tumours in vivo (inhibition rate 23.58%). The docking results showed that compound 11 could form hydrogen bonds with Glu331 and Arg372 in addition to its hydrophobic interaction with ligand-binding domain. Our data implied that compound 11 represented a novel and effective ERRα inverse agonist, which had broad application prospects in the treatment of triple-negative breast cancer.

Reduced emergency room visits and improved medication adherence of an integrated oncology pharmaceutical care practice in China.

OBJECTIVE: We described our initial experience of a new integrated oncology phamaceutical care practice to enhance the quality of pharmacy service and patient care in Huashan hospital.Data sources: A retrospective study was performed from August 2019 to September 2020. Patients were described as integrated pharmacy service group and routine care group. Medication adherence of patients in integrated pharmacy service group was recorded by the online management system. Patient satisfaction and the cumulative incidence of emergency room (ER) and outpatient visit were evaluated between two groups.Data summary: In total, 323 patients received the integrating oncology pharmacy service. The percentage of the patients missing administration every day was reduced from 29.7% to 0.3% within a 40-day monitoring and intervention period. There was a significant difference on patient satisfaction with pharmacy service in two groups (P < 0.05). Fewer patients in the integrated pharmacy service group visited clinic and ER compared with routine care group (33.1% vs. 59.2%; P < 0.05). CONCLUSIONS: As a new practice model, the integrated program is adopted to provide patient care and ongoing monitoring for cancer patients. The practice model delivers high continuity of care for cancer patients and improves communication and collaboration between healthcare professionals and oncology patients. The practice also provides the potential of developing hospital pharmaceutical service and optimizing disease prevention and treatment strategies.

Effects of FGFR gene polymorphisms on response and toxicity of cyclophosphamide-epirubicin-docetaxel-based chemotherapy in breast cancer patients.

BACKGROUND: The chemotherapy resistance and toxicity of chemotherapy are major problems in breast cancer treatment. However, candidate biomarkers for predicting clinical outcomes and better prognosis remain lacking. METHODS: In this study, we analyzed possible impact of 8 genetic variants of fibroblast growth factor receptor1-4 (FGFR1-4) on the treatment response and toxicities in 211 breast cancer patients. DNA was extracted from peripheral blood cells, and the genotypes were examined using the TaqMan Pre-Designed SNP Genotyping Assays. RESULTS: The FGFR4 rs1966265 and FGFR2 rs2981578 contributed to clinical outcome of breast cancer treated with docetaxel-epirubicin-cyclophosphamide (CET)-based chemotherapy. For rs1966265, AA genotype had significant correlation with the clinical response to neoadjuvant chemotherapy (NCT) when compared with GG and AG/GG genotype (P = 0.019 and P = 0.004, respectively). Moreover, A allele of FGFR2 rs2981578 had significant rates of response (P = 0.025). In addition, rs2420946 CC genotype was associated with higher frequency of toxicities compared with TT and CT/TT genotypes (P = 0.038 and P = 0.019, respectively). Also, rs2981578 AG genotype showed higher frequency of toxicities compared with GG genotype (P < 0.0001). CONCLUSIONS: The results suggest these polymorphisms, especially rs1966265 and rs2981578, might be candidate pharmacogenomics factors to the response and prognosis prediction for individualized CET-based chemotherapy in breast cancer patients.

Direct Superassemblies of Freestanding Metal-Carbon Frameworks Featuring Reversible Crystalline-Phase Transformation for Electrochemical Sodium Storage.

High-power sodium-ion batteries (SIBs) with long-term cycling attract increasing attention for large-scale energy storage. However, traditional SIBs toward practical applications still suffer from low rate capability and poor cycle induced by pulverization and amorphorization of anodes at high rate (over 5 C) during the fast ion insertion/extraction process. The present work demonstrates a robust strategy for a variety of (Sb-C, Bi-C, Sn-C, Ge-C, Sb-Bi-C) freestanding metal-carbon framework thin films via a space-confined superassembly (SCSA) strategy. The sodium-ion battery employing the Sb-C framework exhibits an unprecedented performance with a high specific capacity of 246 mAh g-1, long life cycle (5000 cycles), and superb capacity retention (almost 100%) at a high rate of 7.5 C (3.51A g-1). Further investigation indicates that the unique framework structure enables unusual reversible crystalline-phase transformation, guaranteeing the fast and long-cyclability sodium storage. This study may open an avenue to developing long-cycle-life and high-power SIBs for practical energy applications.

An analytic method to investigate hemodynamics of the cardiovascular system: Biventricular system.

Previously, we found analytic solutions for single ventricular system based on the lumped parameter model (LPM). In this study, we generalized the method to biventricular system and derived its analytic solutions. LPM is just a set of differential equations, but it is difficult to solve due to time-varying ventricular elastance and high order. Mathematically, there exist no elementary solutions for time-varying equations. It turns out that instead of differential equations, according to volume conservation, a set of algebraic equations can be carried out. The solutions of the set of equations are just physiological states at end of systolic and diastolic phases such as end systolic/diastolic pressure/volume of left ventricle. As a preliminary application, the method is utilized to deduce the hemodynamic effects of VA ECMO. Left ventricular (LV) distension, a serious complication of VA ECMO, is usually attributed to factors such as increased afterload, inadequate LV unloading, reduced myocardial contractility or aortic valve regurgitation (AR), bronchial and Thebesian return in the absence of aortic valve (AoV) opening. Among these, reduced contractility and AR are strongly associated with LV distension. However, in the absence of reduced contractility or AR, it is less clear whether increased afterload or inadequate LV unloading alone can cause LV distension. This leads to the critical question: under what conditions does LV distension occur in the absence of reduced contractility or AR? The analytic formulas derived in this study give conditions for LV distension. Furthermore, the results show that the analytic hemodynamics are coincident with simulated results.

An analytic method to investigate hemodynamics of the cardiovascular system - single ventricular system.

Based on the lumped parameter model (LPM) of the cardiovascular system, an analytic method is developed to derive its hemodynamics theoretically. As soon as the LPM (a series of differential equations) is solved, the hemodynamics would be obtained immediately. However, because of time-varying ventricular elastance and high order, it is difficult to solve analytically. Through simplifying the LPM, the original biventricular system with continuously varying elastance becomes a single ventricular system with discrete elastance which keeps constant during the systolic or diastolic phase. As a consequence, the original time-varying and high-order system becomes a time-invariant and first-order system during each phase. From the analytic solutions of the simplified system, a set of algebraic equations is carried out. Then the hemodynamics are obtained from the solutions of the algebraic equations. The nature of the algebraic equations is an integral form of the differential equations. A connection between the equations and PV loop is established. All of these equations are deduced based on the idealization of replacing the continuous elastance with the discrete elastance. However, there exist algebraic equations, that can be derived directly from volume conservation, still hold for the case of continuous elastance. As a preliminary application, the method is utilized to deduce the hemodynamics of left heart failure (LHF). The results show that the theoretical hemodynamics of LHF are coincident with simulated results. The analytic method can be generalized to investigate biventricular system. A program for developing a more general framework is presented in the last part.

Constructing and evaluating the effect of micron-scale structures on von Willebrand factor damage.

The incidence of clinical complication gastrointestinal bleeding has been proved as consequence of von Willebrand factor (VWF) damage after mechanical circulatory support in clinic. Many studies have been conducted to evaluate VWF damage, of which the most studied influencing factors are mechanical factors such as shear stress. However, in addition to mechanical factors, VWF damage may also be affected by interface factors. To address this issue, a roller pump circulation platform was established to investigate the effect of material surface micron-scale structures distribution on VWF damage in flow state. A composite micro-structure combining microngrating and micronpost was designed and constructed on the surface of Si wafer by lithography and reactive ion etching, and detailed characterization of material surfaces was also performed. Then the changes of VWF antigen, VWF ristocetin cofactor activity, and the degradation of high molecular weight VWF on these surfaces were investigated and compared. The results showed that, with the encryption of surface micro-structures arrangement, the material surface tends to be more hydrophobic, which is beneficial to reduce VWF damage. Therefore, in the design of material surface inside the mechanical circulatory support devices, it can be considered to add some surface micro-structures with a certain distribution density to change the hydrophilicity and hydrophobicity, so as to minimize the VWF damage. These results can provide important references for the evaluation of VWF damage caused by interface factors, and aid in designing material surface inside the mechanical circulatory support devices.

Resistance valves in circulatory loops have a significant impact on in vitro evaluation of blood damage caused by blood pumps: a computational study.

Background: Hemolysis and its complications are major concerns during the clinical application of blood pumps. In-vitro circulatory testing loops have been employed as the key procedure to evaluate the hemolytic and thrombogenic performance of blood pumps during the development phase and before preclinical in-vivo animal studies. Except for the blood damage induced by the pump under test, blood damage induced by loop components such as the resistance valve may affect the accuracy, reproducibility, and intercomparability of test results. Methods: This study quantitatively investigated the impact of the resistance valve on in vitro evaluation of blood damage caused by blood pumps under different operating points. A series of idealized tubing models under the resistance valve with different openings were created. Three pumps - the FDA benchmark pump, the HeartMate 3 LVAD, and the CH-VAD - were involved in hypothetical tests. Eight operating points were chosen to cover a relatively wide spectrum of testing scenarios. Computational fluid dynamics (CFD) simulations of the tubing and pump models were conducted at the same operating points. Results and Conclusion: Overall, hemolysis and platelet activation induced by a typical resistance valve are equivalent to 17%-45% and 14%-60%, respectively, of those induced by the pump itself. Both ratios varied greatly with flow rate, valve opening and pump models. Differences in blood damage levels between different blood pumps or working conditions can be attenuated by up to 45%. Thus, hemolysis and platelet activation induced by the resistance valve significantly affect the accuracy of in-vitro hemocompatibility evaluations of blood pumps. A more accurate and credible method for hemocompatibility evaluations of blood pumps will benefit from these findings.

The impact of cryo-EM on determining allosteric modulator-bound structures of G protein-coupled receptors.

G-protein coupled receptors (GPCRs) are important therapeutic targets for the treatment of human disease. Although GPCRs are highly successful drug targets, there are many challenges associated with the discovery and translation of small molecule ligands that target the endogenous ligand-binding site for GPCRs. Allosteric modulators are a class of ligands that target alternative binding sites known as allosteric sites and offer fresh opportunities for the development of new therapeutics. However, only a few allosteric modulators have been approved as drugs. Advances in GPCR structural biology enabled by the cryogenic electron microscopy (cryo-EM) revolution have provided new insights into the molecular mechanism and binding location of small molecule allosteric modulators. This review highlights the latest findings from allosteric modulator-bound structures of Class A, B, and C GPCRs with a focus on small molecule ligands. Emerging methods that will facilitate cryo-EM structures of more difficult ligand-bound GPCR complexes are also discussed. The results of these studies are anticipated to aid future structure-based drug discovery efforts across many different GPCRs.

In vitro comparative study of red blood cell and VWF damage on 3D printing biomaterials under different blood-contacting conditions.

Mechanical circulatory support devices (MCSDs) are often associated with hemocompatible complications such as hemolysis and gastrointestinal bleeding when treating patients with end-stage heart failure. Shear stress and exposure time have been identified as the two most important mechanical factors causing blood damage. However, the materials of MCSDs may also induce blood damage when contacting with blood. In this study, the red blood cell and von Willebrand Factor (VWF) damage caused by four 3D printing biomaterials were investigated, including acrylic, PCISO, Somos EvoLVe 128, and stainless steel. A roller pump circulation experimental platform and a rotor blood-shearing experimental platform were constructed to mimic static and dynamic blood-contacting conditions of materials in MCSDs, respectively. Free hemoglobin assay and VWF molecular weight analysis were performed on the experimental blood samples. It indicated that different 3D printing materials and technology could induce different levels of damage to red blood cells and VWF, with acrylic causing the least damage under both static and dynamic conditions. In addition, it was found that blood damage measured for the same material differed on the two platforms. Therefore, a combination of static and dynamic experiments should be used to comprehensively investigate the effects of blood damage caused by the material. It can provide a reference for the design and evaluation of materials in different components of MCSDs.

VEGF single nucleotide polymorphisms predict improved outcome in advanced non-small cell lung cancer patients treated with platinum-based chemotherapy.

We aimed to investigate the prognostic role of genetic variants of VEGF in advanced NSCLC patients treated with platinum-based chemotherapy. A total of 196 patients with advanced NSCLC treated with first-line platinum-based chemotherapy were enrolled. We evaluated the relationship between VEGF polymorphisms and efficacy outcomes and chemotherapy toxicity. We found that rs699947, rs833061 and rs1005230 were in full linkage disequilibrium. Patients with CC genotype of rs833061 had a significant longer PFS than TT genotype (CC vs TT, HR = 1.67, 95%CI = 1.01-2.76, P = 0.043). Patients harbouring CC genotype had longer PFS compared with CT genotype (P < 0.001). Moreover, CC genotypes conferred a significantly increased PFS compared to CT and TT genotype in dominant model (CC vs CT + TT, HR = 1.95, 95%CI = 1.23-3.10, P = 0.005). Patients carrying TT genotype of rs833061 had improved both ORR (HR = 0.54, 95%CI = 0.30-0.98, P = 0.041) and DCR (HR = 0.37, 95%CI = 0.20-0.66, P = 0.001) than non-TT patients. Furthermore, no association was found between any rs833061 alleles and adverse events (P = 0.425), but patients carrying rs1570360 AA genotype were more likely to experience grade 3-4 toxicities (P = 0.004) (GG vs AA, HR = 3.16, 95%CI = 1.26-7.94, P = 0.015). In conclusion, the variant homozygote CC of rs833061 exhibited a better prognosis based on association analysis. The present study provides reference for the future study of platinum-based chemotherapy response and toxicity.

A comprehensive comparison of the in vitro hemocompatibility of extracorporeal centrifugal blood pumps.

Purpose: Blood damage has been associated with patients under temporary continuous-flow mechanical circulatory support. To evaluate the side effects caused by transit blood pumping, in vitro hemocompatibility testing for blood damage in pumps is considered a necessary reference before clinical trials. Methods: The hemocompatibility of five extracorporeal centrifugal blood pumps was investigated comprehensively, including four commercial pumps (the Abbott CentriMag, the Terumo Capiox, the Medos DP3, and the Medtronic BPX-80) and a pump in development (the magAssist MoyoAssist®). In vitro, hemolysis was tested with heparinized porcine blood at nominal operating conditions (5 L/min, 160 mmHg) and extreme operating conditions (1 L/min, 290 mmHg) using a circulation flow loop. Hematology analyses concerning the blood cell counts and the degradation of high-molecular-weight von Willebrand factor (VWF) during 6-h circulation were also evaluated. Results: Comparing the in vitro hemocompatibility of blood pumps at different operations, the blood damage was significantly more severe at extreme operating conditions than that at nominal operating conditions. The performance of the five blood pumps was arranged in different orders at these two operating conditions. The results also demonstrated superior hemocompatibility of CentriMag and MoyoAssist® at two operating conditions, with overall low blood damage at hemolysis level, blood cell counts, and degradation of high-molecular-weight VWF. It suggested that magnetic bearings have an advantage in hemocompatibility compared to the mechanical bearing of blood pumps. Conclusion: Involving multiple operating conditions of blood pumps in in vitro hemocompatibility evaluation will be helpful for clinical application. In addition, the magnetically levitated centrifugal blood pump MoyoAssist® shows great potential in the future as it demonstrated good in vitro hemocompatibility.

Investigation into the effect of the aspect ratio of cylindrical surface microstructure on von Willebrand factor damage.

Hemorrhagic episodes in patients carrying mechanical circulatory support represent a severe clinical complication. These bleeding episodes may originate from a reduced functionality of von Willebrand factor (VWF), a multimer protein pertinent to form a hemostatic plug. The reduced functionality is due to increased loss of high molecular weight von Willebrand factor multimers (HMWM-VWF), a phenomenon that is facilitated by device-induced increases in shear stress to which VWF is exposed. However, in addition to the mechanics factors, VWF damage may also be affected by interface factors, including the properties of bulk material and the surface characteristics. In this study, the effect of cylindrical surface microstructure topography on VWF damage was investigated. In the 1 to 9 range, the high aspect ratio surface features were constructed on the polycarbonate (PC) films. The topographic surfaces were fabricated by 3D printing casting on a template. A roller pump circulation platform was built to conduct in vitro experiments. VWF antigen (VWF-Ag) and VWF ristocetin cofactor activity (VWF-Rico) on these topographic surfaces were quantified by enzyme-linked immunosorbent assay (ELISA), the loss of HMWM-VWF was quantified by immunoblotting. The lower loss of HMWM-VWF was observed on surfaces with high aspect ratio compared to the pristine PC templates and surfaces with low aspect ratio, while VWF-Ag was nearly unchanged. The topographical parameters found to significantly reduce the loss of HMWM-VWF were high aspect ratio structures of more than 5. The results signify that topographical manipulation of surfaces is a feasible approach for reducing the loss of HMWM-VWF.

In vitro study of red blood cell and VWF damage in mechanical circulatory support devices based on blood-shearing platform.

Blood damage induced by mechanical circulatory support devices (MCSDs) remains a significant challenge to optimal clinical care. Although researchers have been conducting in vitro studies, the major determinant of blood damage is still unclear. An optimized capillary tube blood-shearing platform with custom designed parts was constructed to investigate the influence of two flow-dependent parameters (shear stress and exposure time) on the shear-induced damage of red blood cells and von Willebrand factor (VWF). Blood samples under different high shear stress and instantaneous exposure time were obtained by changing the flow rate and the length of capillary tube. Plasma free hemoglobin assay and immunoblotting of VWF were then performed on the sheared blood samples. The quantitative correlation between the hemolysis index and the two flow-dependent parameters was found following the power law mathematical model under the flow condition with high shear stress and instantaneous exposure time. The degradation of high molecular weight VWF was not obvious under high shear stress factor. However, the degradation of high molecular weight VWF was found as the result of the accumulation over exposure time under non-physiological shear stress, which was consistent with the different mechanism of VWF damage comparing to red blood cell damage. Compared to peak shear stress, exposure time has a greater effect on both red blood cell and VWF damage. To improve the hemocompatibility of MCSDs, it is more important to avoid regions of slow blood flow with non-physiological shear stress under laminar flow conditions.

Mathematical models for shear-induced blood damage based on vortex platform.

Non-physiological shear stress in Ventricular Assist Device (VAD) is considered to be an important trigger of blood damage, which has become the biggest shackle for clinical application. The researches on blood damage in literature were limited to qualitative but did not make much quantitative analysis. The purpose of this study was to investigate the quantitative influence of two flow-dependent parameters: shear stress (rotational speed) and exposure time on the shear-induced damage of red blood cells and von Willebrand Factor (vWF). A vortex blood-shearing platform was constructed to conduct in vitro experiments. Free hemoglobin assay and vWF molecular weight analysis were then performed on the sheared blood samples. MATLAB was used for regression fitting of original experimental data. The quantitative correlations between the hemolysis index, the degradation of high molecular weight vWF and the two flow-dependent parameters were found both following the power law model. The mathematic models indicated that the sensitivity of blood damage on red blood cells and vWF to exposure time was both greater than that of shear stress. Besides, the damage of vWF was more serious than that of red blood cells at the same flow condition. The models could be used to predict blood damage in blood-contacting medical devices, especially for the slow even stagnant blood flow regions in VAD, thus may provide useful guidance for VAD development and improvement. It also indicated that the vortex platform can be used to study the law of blood damage for the simple structure and easy operation.

The influence of surface roughness on the damage of von Willebrand Factor under shear flow condition.

Despite technological advances in mechanical circulatory support devices to treat end-stage heart failure, blood damage induced by non-physiological shear stress in operation often triggered clinical hemocompatibility complications. The loss of high molecular weight von Willebrand Factor (HMW-VWF) has been considered as an essential cause of gastrointestinal bleeding. In addition to the mechanics factors, interface factors may also affect blood damage, especially the surface characteristics. In this study, the effect of surface roughness on VWF damage under flow condition was investigated. A roller pump circulation experimental platform with a roughness embedded sample chamber was constructed to provide blood shearing flow condition. VWF molecular weight analysis, VWF antigen (VWF-Ag) concentration assay, and VWF ristocetin cofactor activity (VWF-Rico) assay were performed on the sheared blood samples. These variables are the main functional indicators of VWF. It was found that the surface roughness induced VWF damage is mainly caused by the loss of HMW-VWF rather than reducing the total amount of VWF. The threshold value of surface roughness for a rapid increase in the degradation of HMW-VWF under low flow rate was obtained between Ra 0.4 and 0.6 µm, which was smaller than the threshold for hemolysis. Our findings indicated that VWF is more sensitive to the interface factor of surface roughness than red blood cells, thus has a higher requirement for blood pump design. It could provide reference for the material design and processing in developing mechanical circulatory support devices.

Large eddy simulation as a fast and accurate engineering approach for the simulation of rotary blood pumps.

An accurate representation of the flow field in blood pumps is important for the design and optimization of blood pumps. The primary turbulence modeling methods applied to blood pumps have been the Reynolds-averaged Navier-Stokes (RANS) or URANS (unsteady RANS) method. Large eddy simulation (LES) method has been introduced to simulate blood pumps. Nonetheless, LES has not been widely used to assist in the design and optimization of blood pumps to date due to its formidable computational cost. The purpose of this study is to explore the potential of the LES technique as a fast and accurate engineering approach for the simulation of rotary blood pumps. The performance of "Light LES" (using the same time and spatial resolutions as the URANS) and LES in two rotary blood pumps was evaluated by comparing the results with the URANS and extensive experimental results. This study showed that the results of both "Light LES" and LES are superior to URANS, in terms of both performance curves and key flow features. URANS could not predict the flow separation and recirculation in diffusers for both pumps. In contrast, LES is superior to URANS in capturing these flows, performing well for both design and off-design conditions. The differences between the "Light LES" and LES results were relatively small. This study shows that with less computational cost than URANS, "Light LES" can be considered as a cost-effective engineering approach to assist in the design and optimization of rotary blood pumps.