Boosting Demulsification and Antifouling Capacity of Membranes via an Enhanced Piezoelectric Effect for Sustaining Emulsion Separation.

Traditional superwettable membranes for demulsification of oil/water emulsions could not maintain their separation performance for long because of low demulsification capacity and surface fouling during practical applications. A charging membrane could repel the contaminants for a while, the charge of which would gradually be neutralized during the separation progress. Here, a superhydrophilic piezoelectric membrane (SPM) with sustained demulsification and antifouling capacity is proposed for achieving prolonged emulsion separation, which is capable of converting inherent pulse hydraulic filtration pressure into pulse voltage. A pulse voltage up to -7.6 V is generated to intercept the oil by expediting the deformation and coalescence of emulsified oil droplets, realizing the demulsification. Furthermore, it repels negatively charged oil droplets, avoiding membrane fouling. Additionally, any organic foulants adhering to the membrane undergo degradation facilitated by the generated reactive oxygen species. The separation data demonstrate a 98.85% efficiency with a flux decline ratio below 14% during a 2 h separation duration and a nearly 100% flux recovery of SPM. This research opens new avenues in membrane separation, environmental remediation, etc.

High Strength MXene/PBONF Heterogeneous Membrane with Excellent Ion Selectivity for Efficient Osmotic Energy Conversion.

Layered MXene nanofluidic membranes still face the problems of low mechanical property, poor ion selectivity, and low output power density. In this work, we successfully constructed heterostructured membranes with the combination of the layered channels of the MXene layer on the top and the nanoscale poly(p-phenylene-benzodioxazole) nanofiber (PBONF) layer on the bottom through a stepwise filtration method. The as-prepared MXene/PBONF-50 heterogeneous membrane exhibits high mechanical properties (strength of 221.6 MPa, strain of 3.2%), high ion selectivity of 0.87, and an excellent output power density of 15.7 W/m2 at 50-fold concentration gradient. Excitingly, the heterogeneous membrane presents a high power density of 6.8 W/m2 at a larger testing area of 0.79 mm2 and long-term stability. This heterogeneous membrane construction provides a viable strategy for the enhancement of mechanical properties and osmotic energy conversion of 2D materials.

Boosted Tetracycline and Cr(VI) Simultaneous Cleanup over Z-Scheme WO3/CoO p-n Heterojunction with 0D/3D Structure under Visible Light.

In this study, a Z-Scheme WO3/CoO p-n heterojunction with a 0D/3D structure was designed and prepared via a simple solvothermal approach to remove the combined pollution of tetracycline and heavy metal Cr(VI) in water. The 0D WO3 nanoparticles adhered to the surface of the 3D octahedral CoO to facilitate the construction of Z-scheme p-n heterojunctions, which could avoid the deactivation of the monomeric material due to agglomeration, extend the optical response range, and separate the photogenerated electronhole pairs. The degradation efficiency of mixed pollutants after a 70 min reaction was significantly higher than that of monomeric TC and Cr(VI). Among them, a 70% WO3/CoO heterojunction had the best photocatalytic degradation effect on the mixture of TC and Cr(VI) pollutants, and the removing rate was 95.35% and 70.2%, respectively. Meanwhile, after five cycles, the removal rate of the mixed pollutants by the 70% WO3/CoO remained almost unchanged, indicating that the Z-scheme WO3/CoO p-n heterojunction has good stability. In addition, for an active component capture experiment, ESR and LC-MS were employed to reveal the possible Z-scheme pathway under the built-in electric field of the p-n heterojunction and photocatalytic removing mechanism of TC and Cr(VI). These results offer a promising idea for the treatment of the combined pollution of antibiotics and heavy metals by a Z-scheme WO3/CoO p-n heterojunction photocatalyst, and have broad application prospects: boosted tetracycline and Cr(VI) simultaneous cleanup over a Z-scheme WO3/CoO p-n heterojunction with a 0D/3D structure under visible light.

Self-Organized Spatiotemporal Mineralization of Hydrogel: A Simulant of Osteon.

Nature creates fascinating self-organized spatiotemporal patterns through the delicate control of reaction-diffusion dynamics. As the primary unit of cortical bone, osteon has concentric lamellar architecture, which plays a crucial role in the mechanical and physiological functions of bone. However, it remains a great challenge to fabricate the osteon-like structure in a natural self-organization way. Taking advantage of the nonequilibrium reaction in hydrogels, a simple mineralization strategy to closely mimic the formation of osteon in a mild physiological condition is developed. By constructing two reverse concentration gradients of ions from periphery to interior of cylindrical hydrogel, spatiotemporal self-organization of calcium phosphate in concentric rings is generated. It is noteworthy that minerals in different layers possess diverse contents and crystalline phases, which further guide the adhesion and spread of osteoblasts on these patterns, resembling the architecture and cytological behavior of osteon. Besides, theoretical data indicates the predominate role of ion concentrations and pH values of solution, in good accordance with experimental results. Independent of precise instruments, this lifelike method is easily obtained, cost-efficient, and effectively imitates the mineral deposition in osteon from a physiochemical view. The strategy may be expanded to develop other functional material patterns via spatiotemporal self-organization.

Ultrafast and On-Demand Oil/Water Separation Membrane System Based on Conducting Polymer Nanotip Arrays.

Ultrafast oil/water separation based on tunable superwettability switch remains a big challenge. Here, inspired by the ultrafast water transport mechanism in sarracenia, we develop a micro/nanostructured porous membrane with conducting polymer nanotip arrays through the surface-initiated polymerizations. By modulating the height (ranging from 49-529 nm) and redox states of nanotips, a smart reversible superwettability switch is facile to obtain with contact angles of water/oil arranging from 161° to about 0°. Besides, liquid transport speed was accelerated more than 1.5 times by increasing the nanotip length. The water flux could reach up to 50326 L m-2 h-1 (1000 times that of a typical industrial ultrafiltration membrane). This is attributed to the stable and continuous water film along the nanotips, which provide a lubrication layer, leading to an increase of permeability. This work provides significant insights into macro/nanostructured membrane design for smart separation, blood lipid filtration, and smart nanoreactors with high permeability.

Groundwater quality for potable and irrigation uses and associated health risk in southern part of Gu'an County, North China Plain.

The study area is a part of the North China Plain, where groundwater is heavily abstracted for drinking and irrigation purposes. Groundwater quality is adversely affected due to rapid economic development and urbanization. Therefore, the purposes of this study were to evaluate the suitability of groundwater for drinking and irrigation purposes and to quantify the associated human health risks in the southern part of Gu'an County, North China Plain. The matter-element extension method based on entropy weight was used to evaluate the water quality for drinking, while sodium adsorption ratio, sodium percentage (%Na), residual sodium carbonate and magnesium hazard were used to evaluate the water quality for irrigation. Non-carcinogenic and carcinogenic health risks via different exposure ways were evaluated for different age groups. The study found that the quality of both deep and shallow groundwater in this area was generally suitable for drinking. Deep water quality has better quality than the shallow water. However, 8.70% and 73.92% of water samples pose non-carcinogenic health risks on adults and children, respectively. Children and adults are also at cancer risk due to Cr6+ and As in drinking groundwater in this area. The main responsible parameters for non-carcinogenic risk are Cr6+, F- and Fe, and Cr6+ is also responsible for carcinogenic risk. These toxic elements are mainly from industries. Therefore, deterioration of groundwater quality can be prevented by strengthening the sewage management of various industries.

Fabricating surfaces with tunable wettability and adhesion by ionic liquids in a wide range.

A series of surfaces that can either be fully wetted or non-wetted by three kinds of ionic liquids (ILs) are successfully designed by rationally controlling surface chemistries and structures. Meanwhile, the adhesion forces between these surfaces and the ILs can also be effectively modulated in a wide range. This fundamental research will greatly promote the development of IL-based materials in practical applications.

Groundwater health risk assessment of North China Plain based on Monte Carlo model sensitivity analysis and morphological analysis: A case study of Shijiazhuang City.

The rapid development of the social economy and the influence of human activities can lead to aggravated groundwater pollution. Groundwater safety is the premise of residents' health. Therefore, studying the sustainable utilization and health risks of groundwater quality is important. The groundwater quality and potential health risks were evaluated in the Shijiazhuang area, which is located in the North China Plain in this paper. Based on 159 groundwater samples collected in the study area, the potential health risks of As, Cr6+, Ni, Pb, F-, and NO3 - to humans were evaluated from oral and skin contact. Results of the human health risk assessment showed that the average carcinogenic risk and non-carcinogenic risk of children are higher than those of adults. According to the spatial distribution of the total risk value, adults and children in the southwest of the study area face higher risks. Because of the uncertainty of USEPA, Monte Carlo simulation was used to calculate the probability of health risk assessment and prioritization of contaminant treatment. The results of the Monte Carlo simulation showed that the acceptable range for children is 6.82%, and the acceptable range for adults is 18.07%. According to the HRWM model, carcinogenic pollutants mainly include As, Cr6+, and Ni. The most important chemical species of As is HAsO4 2-, followed by H2AsO4 -. Similarly, CrO4 2- and Ni2+ are the main forms of Cr6+ and Ni. The results of this study can provide data support for the protection and management of groundwater quality in the North China Plain. PRACTITIONER POINTS: Children are more susceptible to carcinogenic risk than adults. After calculation, the main influencing elements are Ni and Cr. Metal morphology analysis was carried out, and the results showed that HAsO4 2-, CrO4 2-, and Ni2+ were the main types.

Light and Magnetism Orchestrating Aquatic Pollutant-Degradation Robots in Programmable Trajectories.

Interfacial floating robots have promising applications in carriers, environmental monitoring, water treatment, and so on. Even though, engineering smart robots with both precisely efficient navigation and elimination of water pollutants in long term remains a challenge, as the superhydrophobicity greatly lowers resistance for aquatic motion while sacrificing chemical reactivity of the surface. Here, a pollutant-removing superhydrophobic robot integrated with well-assembled iron oxide-bismuth sulfide heterojunction composite minerals, which provide both light and magnetic propulsion, and the ability of catalytic degradation, is reported. The motion velocity of the robot reaches up to 51.9 mm s-1 within only 300 ms of acceleration under the orchestration of light, and brakes rapidly (≈200-300 ms) once turn off the light. And magnetism extends the robot to work in broad range of surface tensions in any programmable trajectory. Besides, purification of polluted water is efficiently achieved in situ and the degradation efficiency exhibits eightfold enhancements under the effect of light-triggered photothermal behavior coupled with magnetic induction, overcoming the dilemma of efficient motion with catalytic superhydrophobicity. This strategy developed here provides guidelines for the explorations of high-performance smart devices.

Construction of a floating photothermal-assisted photocatalytic system with a three-dimensional hollow porous network structure.

Solar energy is the inevitable choice to achieve the low-carbon, green, and circular development of society, and photocatalysis technology is one of the shining pearls. To make full use of the solar spectrum and solve the shortcomings of the recovery difficulty of powdery materials and the loss of activity due to the influence of the external environment, it is possible to construct floating materials using melamine sponges to recover photocatalytic materials quickly. At the same time, floating materials can absorb oxygen in the air for the generation of active groups, effectively solving the problem of less O2 in the water. The carbon-based materials have excellent light absorption properties, high thermal conductivity, and excellent photothermal conversion efficiency and are ideal for constructing floating photothermal photocatalytic systems. As an example, we combined a cheap melamine sponge with urea, prepared a hollow porous network structure g-C3N4 (HPNCN) with a high specific surface area by direct thermal shrinkage method, and then attached the CoO to its surface by hydrothermal method to form a heterojunction with a suitable band gap. Various characterization tests verified the photothermal-photocatalytic properties. Among them, 30% CoO/HPNCN has the best photocatalytic degradation effect on tetracycline (TC), and the removal rate is 88.1%. After five cycles, the removal rate is only 5% lower than the initial, indicating that it has good stability and recyclability. We conducted an active ingredient capture experiment, ESR, and LC-MS analysis to clarify the intermediates and reaction mechanism of TC photocatalytic degradation. On this basis, the ECOSAR program and QSAR method were used to analyze the environmental toxicity of TC and its intermediate products. These results provide a broad prospect for the potential application of the floating photothermal-photocatalysis system in antibiotic pollution control and its application in other fields.

A new evaluation system for drug-microbiota interactions.

The drug response phenotype is determined by a combination of genetic and environmental factors. The high clinical conversion failure rate of gene-targeted drugs might be attributed to the lack of emphasis on environmental factors and the inherent individual variability in drug response (IVDR). Current evidence suggests that environmental variables, rather than the disease itself, are the primary determinants of both gut microbiota composition and drug metabolism. Additionally, individual differences in gut microbiota create a unique metabolic environment that influences the in vivo processes underlying drug absorption, distribution, metabolism, and excretion (ADME). Here, we discuss how gut microbiota, shaped by both genetic and environmental factors, affects the host's ADME microenvironment within a new evaluation system for drug-microbiota interactions. Furthermore, we propose a new top-down research approach to investigate the intricate nature of drug-microbiota interactions in vivo. This approach utilizes germ-free animal models, providing foundation for the development of a new evaluation system for drug-microbiota interactions.

Designing Robust Superhydrophobic Materials for Inhibiting Nucleation of Clathrate Hydrates by Imitating Glass Sponges.

Superhydrophobic surfaces are suggested to deal with hydrate blockage because they can greatly reduce adhesion with the formed hydrates. However, they may promote the formation of fresh hydrate nuclei by inducing an orderly arrangement of water molecules, further aggravating hydrate blockage and meanwhile suffering from their fragile surfaces. Here, inspired by glass sponges, we report a robust anti-hydrate-nucleation superhydrophobic three-dimensional (3D) porous skeleton, perfectly resolving the conflict between inhibiting hydrate nucleation and superhydrophobicity. The high specific area of the 3D porous skeleton ensures an increase in terminal hydroxyl (inhibitory groups) content without damaging the superhydrophobicity, achieving the inhibition to fresh hydrates and antiadhesion to formed hydrates. Molecular dynamics simulation results indicate that terminal hydroxyls on a superhydrophobic surface can inhibit the formation of hydrate cages by disordering the arrangement of water molecules. And experimental data prove that the induction time of hydrate formation was prolonged by 84.4% and the hydrate adhesive force was reduced by 98.7%. Furthermore, this porous skeleton still maintains excellent inhibition and antiadhesion properties even after erosion for 4 h at 1500 rpm. Therefore, this research paves the way toward developing novel materials applied in the oil and gas industry, carbon capture and storage, etc.

Lactobacillus and Allobaculum mediates the improvement of vascular endothelial dysfunction during hypertension with TaohongSiwu decoction combined with Dubosiella newyorkensis.

Background: Previous study confirmed that both TaohongSiwu decoction (THSWD) and Dubosiella newyorkensis improved hypertension-induced endothelial dysfunction. However, the mechanism of THSWD combined with Dubosiella newyorkensis remains unclear. Purpos: e: We aimed to investigate the microecological mechanism underlying the THSWD combined with Dubosiella newyorkensis for the prevention of hypertensive vascular endothelial dysfunction. Methods: Eight percent high-salt diet was applied to induce hypertension in a mouse model for 4 weeks. THSWD, Dubosiella newyorkensis and THSWD combined with Dubosiella newyorkensis were used to intervene in the model mice to observe the changes of systolic blood pressure (SBP), body weight, blood routine, endothelial function, gut contents microbiota and bile acid metabolites. Results: Results revealed that THSWD combined with Dubosiella newyorkensis significantly restored blood pressure and regulated body weight, and markedly downregulating serum and vascular levels of endothelin-1 (ET-1), thrombin regulatory protein (TM), vascular hemophilia factor (vWF) and vascular endothelial growth factor (VEGF), and upregulating nitric oxide (NO) levels compared with the model group. Notably, It altered the diversity and community structure of gut contents microbiota in mice. Lactobacillus and Allobaculum was enormously up-regulated at the genus level. Serum bile acid differential metabolites cholic acid and chenodeoxycholic acid were markedly altered. Futhermore, there was a close relationship between Lactobacillus, Allobaculum and endothelial function indexes in mice. Conclusion: Lactobacillus and Allobaculum play important roles in the prevention of vascular endothelial dysfunction in hypertension during the THSWD combined with Dubosiella newyorkensis.

Electro-mechanical coupling directs endothelial activities through intracellular calcium ion deployment.

Conversion between mechanical and electrical cues is usually considered unidirectional in cells with cardiomyocytes being an exception. Here, we discover a material-induced external electric field (Eex) triggers an electro-mechanical coupling feedback loop in cells other than cardiomyocytes, human umbilical vein endothelial cells (HUVECs), by opening their mechanosensitive Piezo1 channels. When HUVECs are cultured on patterned piezoelectric materials, the materials generate Eex (confined at the cellular scale) to polarize intracellular calcium ions ([Ca2+]i), forming a built-in electric field (Ein) opposing Eex. Furthermore, the [Ca2+]i polarization stimulates HUVECs to shrink their cytoskeletons, activating Piezo1 channels to induce influx of extracellular Ca2+ that gradually increases Ein to balance Eex. Such an electro-mechanical coupling feedback loop directs pre-angiogenic activities such as alignment, elongation, and migration of HUVECs. Activated calcium dynamics during the coupling further modulate the downstream angiogenesis-inducing eNOS/NO pathway. These findings lay a foundation for developing new ways of electrical stimulation-based disease treatment.

A Euryhaline-Fish-Inspired Salinity Self-Adaptive Nanofluidic Diode Leads to High-Performance Blue Energy Harvesters.

The adaptability to wide salinities remains a big challenge for artificial nanofluidic systems, which plays a vital role in water-energy nexus science. Here, inspired by euryhaline fish, sandwich-structured nanochannel systems are constructed to realize salinity self-adaptive nanofluidic diodes, which lead to high-performance salinity-gradient power generators with low internal resistance. Adaptive to changing salinity, the pore morphology of one side of the nanochannel system switches from a 1D straight nanochannel (45 nm) to 3D network pores (1.9 nm pore size and ≈1013 pore density), along with three orders of magnitude change for charge density. Thus, the abundant surface charges and narrow pores render the membrane-based osmotic power generator with power density up to 26.22 Wm-2 . The salinity-adaptive membrane solves the surface charge-shielding problem caused by abundant mobile ions in high salinity and increases the overlapping degree of the electric double layer. The dynamic adaption process of the membrane to the hypersaline environment endows it with good salt endurance and stability. New routes for designing nanofluidic devices functionally adaptable to different salinities and building power generators with excellent salt endurance are demonstrated.

A Constrained Assembly Strategy for High-Strength Natural Nanoclay Film.

Developing high-performance materials from existing natural materials is highly desired because of their environmental friendliness and low cost; two-dimensional nanoclay exfoliated from layered silicate minerals is a good building block to construct multilayered macroscopic assemblies for achieving high mechanical and functional properties. Nevertheless, the efforts have been frustrated by insufficient inter-nanosheet stress transfer and nanosheet misalignment caused by capillary force during solution-based spontaneous assembly, degrading the mechanical strength of clay-based materials. Herein, a constrained assembly strategy that is implemented by in-plane stretching a robust water-containing nanoclay network with hydrogen and ionic bonding is developed to adjust the 2D topography of nanosheets within multilayered nanoclay film. In-plane stretching overcomes capillary force during water removal and thus restrains nanosheet conformation transition from nearly flat to wrinkled, leading to a highly aligned multilayered nanostructure with synergistic hydrogen and ionic bonding. It is proved that inter-nanosheet hydrogen and ionic bonding and nanosheet conformation extension generate profound mechanical reinforcement. The tensile strength and modulus of natural nanoclay film reach up to 429.0 MPa and 43.8 GPa and surpass the counterparts fabricated by normal spontaneous assembly. Additionally, improved heat insulation function and good nonflammability are shown for the natural nanoclay film and extend its potential for realistic uses.

Catalpol attenuates polycystic ovarian syndrome by regulating sirtuin 1 mediated NF-κB signaling pathway.

Oxidative stress plays a central role in polycystic ovary syndrome (PCOS). Catalpol (CAT) is the active ingredient of Rehmannia glutinosa Libosch which has therapeutic effect on PCOS. However, little is known about the mechanism of CAT in PCOS. PCOS rats were induced by subcutaneous injection of dehydroepiandrosteronec for four weeks and then were treated with CAT (50 mg/kg) or carboxyl methyl cellulose (the solvent of CAT) or normal saline for another 4 weeks. Histopathological observation of ovarian tissues, the levels of testosterone, estradiol and progesterone in rat plasma samples, the oxidative stress related-indexes and the expressions of NF-κB pathway-related proteins were determined. KGN cell (human ovarian granulosa cell line) was used as PCOS cell model and was transfected with siSIRT1 in the presence of CAT. The viability, proliferation and apoptosis of cells and the levels of SIRT1 and NF-κB pathway-related proteins were measured. CAT lessened the anthropometric indices and improved ovarian damage in PCOS model rats, and reduced the levels of testosterone, estradiol, progesterone and MDA, increased GSH content, and elevated the activities of catalase, GSH-Px and SOD in ovarian tissues of PCOS model rats. CAT up-regulated SIRT1 level and inhibited the activation of NF-κB signaling pathway in PCOS rat model and KGN cells. Silencing SIRT1 increased the viability and proliferation, whilst decreased the apoptosis of CAT-treated KGN cells. Silencing SIRT1 counteracted the effect of CAT on the level of oxidative stress-related factors and NF-κB signaling pathway in KGN cells. CAT attenuated PCOS by regulating SIRT1 mediated NF-κB signaling pathway.

Self-Exfoliation of Flake Graphite for Bioinspired Compositing with Aramid Nanofiber toward Integration of Mechanical and Thermoconductive Properties.

HIGHLIGHTS: A self-grinding exfoliation strategy that depends on mutual shear friction between flake graphite particles is successfully developed to prepare pristine graphene with largely enhanced yield and productivity. Bioinspired assembly of pristine graphene nanosheets to an interconnected aramid nanofiber network is achieved by a continuous sol-gel-film transformation strategy and generates a flexible yet highly thermoconductive film. Flexible yet highly thermoconductive materials are essential for the development of next-generation flexible electronic devices. Herein, we report a bioinspired nanostructured film with the integration of large ductility and high thermal conductivity based on self-exfoliated pristine graphene and three-dimensional aramid nanofiber network. A self-grinding strategy to directly exfoliate flake graphite into few-layer and few-defect pristine graphene is successfully developed through mutual shear friction between graphite particles, generating largely enhanced yield and productivity in comparison to normal liquid-based exfoliation strategies, such as ultrasonication, high-shear mixing and ball milling. Inspired by nacre, a new bioinspired layered structural design model containing three-dimensional nanofiber network is proposed and implemented with an interconnected aramid nanofiber network and high-loading graphene nanosheets by a developed continuous assembly strategy of sol-gel-film transformation. It is revealed that the bioinspired film not only exhibits nacre-like ductile deformation behavior by releasing the hidden length of curved aramid nanofibers, but also possesses good thermal transport ability by directionally conducting heat along pristine graphene nanosheets.

Engineering Polymeric Nanofluidic Membranes for Efficient Ionic Transport: Biomimetic Design, Material Construction, and Advanced Functionalities.

Design elements extracted from biological ion channels guide the engineering of artificial nanofluidic membranes for efficient ionic transport and spawn biomimetic devices with great potential in many cutting-edge areas. In this context, polymeric nanofluidic membranes can be especially attractive because of their inherent flexibility and benign processability, which facilitate massive fabrication and facile device integration for large-scale applications. Herein, the state-of-the-art achievements of polymeric nanofluidic membranes are systematically summarized. Theoretical fundamentals underlying both biological and synthetic ion channels are introduced. The advances of engineering polymeric nanofluidic membranes are then detailed from aspects of structural design, material construction, and chemical functionalization, emphasizing their broad chemical and reticular/topological variety as well as considerable property tunability. After that, this Review expands on examples of evolving these polymeric membranes into macroscopic devices and their potentials in addressing compelling issues in energy conversion and storage systems where efficient ion transport is highly desirable. Finally, a brief outlook on possible future developments in this field is provided.

Wireless electrical stimulation at the nanoscale interface induces tumor vascular normalization.

Pathological angiogenesis frequently occurs in tumor tissue, limiting the efficiency of chemotherapeutic drug delivery and accelerating tumor progression. However, traditional vascular normalization strategies are not fully effective and limited by the development of resistance. Herein, inspired by the intervention of endogenous bioelectricity in vessel formation, we propose a wireless electrical stimulation therapeutic strategy, capable of breaking bioelectric homeostasis within cells, to achieve tumor vascular normalization. Polarized barium titanate nanoparticles with high mechano-electrical conversion performance were developed, which could generate pulsed open-circuit voltage under low-intensity pulsed ultrasound. We demonstrated that wireless electrical stimulation significantly inhibited endothelial cell migration and differentiation in vitro. Interestingly, we found that the angiogenesis-related eNOS/NO pathway was inhibited, which could be attributed to the destruction of the intracellular calcium ion gradient by wireless electrical stimulation. In vivo tumor-bearing mouse model indicated that wireless electrical stimulation normalized tumor vasculature by optimizing vascular structure, enhancing blood perfusion, reducing vascular leakage, and restoring local oxygenation. Ultimately, the anti-tumor efficacy of combination treatment was 1.8 times that of the single chemotherapeutic drug doxorubicin group. This work provides a wireless electrical stimulation strategy based on the mechano-electrical conversion performance of piezoelectric nanoparticles, which is expected to achieve safe and effective clinical adjuvant treatment of malignant tumors.