ABSTRACT
The phenomenon of high-temperature oxidation in magnesium alloys constitutes a significant obstacle to their application in the aerospace field. However, the incorporation of active elements such as alloys and rare earth elements into magnesium alloys alters the organization and properties of the oxide film, resulting in an enhancement of their antioxidation capabilities. This paper comprehensively reviews the impact of alloying elements, solubility, intermetallic compounds (second phase), and multiple rare earth elements on the antioxidation and flame-retardant effects of magnesium alloys. The research progress of flame-retardant magnesium alloys containing multiple rare earth elements is summarized from two aspects: the oxide film and the matrix structure. Additionally, the existing flame-retardancy models for magnesium alloys and the flame-retardant mechanisms of various flame-retardant elements are discussed. The results indicate that the oxidation of rare earth magnesium alloys is a complex process determined by internal properties such as the structure and properties of the oxide film, the type and amount of rare earth elements added, the proportion of multiple rare earth elements, synergistic element effects, as well as external properties like heat treatment, oxygen concentration, and partial pressure. Finally, some issues in the development of multi-rare earth magnesium alloys are raised and the potential directions for the future development of rare earth flame-retardant magnesium alloys are discussed. This paper aims to promote an understanding of the oxidation behavior of flame-retardant magnesium alloys and provide references for the development of rare earth flame-retardant magnesium alloys with excellent comprehensive performance.
ABSTRACT
As an advanced manufacturing technology that has been developed in recent years, three-dimensional (3D) printing of macromolecular materials can create complex-shaped components that cannot be realized by traditional processing. However, only a few types of macromolecular materials are suitable for 3D printing: the structure must have a single function, and manufacturing macromolecular functional devices is difficult. In this study, using poly lactic acid (PLA) as a matrix, conductive composites were prepared by adding various contents of multi-walled carbon nanotubes (MWCNTs). The printability and properties of MWCNT/PLA composites with different MWCNT proportions were studied by using the fused deposition modeling (FDM) processing technology of 3D printing. The experimental results showed that high conductivity can be realized in 3D-printed products with a composite material containing 5% MWCNTs; its conductivity was 0.4 ± 0.2 S/cm, its tensile strength was 78.4 ± 12.4 MPa, and its elongation at break was 94.4% ± 14.3%. It had a good melt flow rate and thermal properties, and it enabled smooth printing, thus meeting all the requirements for the 3D printing of consumables.