Effect of light intensity and photoperiod on high-value production and nutrient removal performance with bacterial-algal coupling system.

Direct discharge of mariculture wastewater can lead to eutrophication, posing a threat to aquatic ecosystems. A novel Bacteria-Algae Coupled Reactor (BACR) offers advantages in treating mariculture wastewater, which can effectively remove pollutants while simultaneously obtaining microalgal products. However, there is limited information available on how illumination affects the cultivation of mixotrophic microalgae in this bacteria-algae coupling system. Therefore, a combined strategy of photoperiod and light intensity regulation was employed to improve the biological mariculture wastewater remediation, promote microalgae biomass accumulation, and increase the high-value product yield in this study. Optimal light conditions could effectively enhance microalgal carbohydrate, protein, lipid accumulation and photosynthetic activity, with the carbohydrate, protein and lipid contents reached 44.11, 428.57 and 399.68 mg/L, respectively. Moreover, excellent removal rates were achieved for SCOD, NH4+-N and TP, reaching 86.68%, 87.35% and 95.13% respectively. This study proposes a comprehension of BACR processes in mariculture wastewater under different light conditions.

Regulating Reconstruction-Engineered Active Sites for Accelerated Electrocatalytic Conversion of Urea.

Reconstruction-engineered electrocatalysts with enriched high active Ni species for urea oxidation reaction (UOR) have recently become promising candidates for energy conversion. However, to inhibit the over-oxidation of urea brought by the high valence state of Ni, tremendous efforts are devoted to obtaining low-value products of nitrogen gas to avoid toxic nitrite formation, undesirably causing inefficient utilization of the nitrogen cycle. Herein, we proposed a mediation engineering strategy to significantly boost high-value nitrite formation to help close a loop for the employment of a nitrogen economy. Specifically, platinum-loaded nickel phosphides (Pt-Ni2P) catalysts exhibit a promising nitrite production rate (0.82 mol kWh-1 cm-2), high stability over 66 h of Zn-urea-air battery operation, and 135 h of co-production of nitrite and hydrogen under 200 mA cm-2 in a zero-gap membrane electrode assembly (MEA) system. The in situ spectroscopic characterizations and computational calculations demonstrated that the urea oxidation kinetics is facilitated by enriched dynamic Ni3+ active sites, thus augmenting the "cyanate" UOR pathway. The C-N cleavage was further verified as the rate-determining step for nitrite generation.

Asterarcys quadricellulare (Chlorophyceae) protects H9c2 cardiomyoblasts from H2O2-induced oxidative stress.

Oxidative stress has recently been identified as an important mediator of cardiovascular diseases. The need to find efficient antioxidant molecules is essential in the disease's prevention. Therefore, the present study aimed to evaluate the potential of microalgae bioactive in protecting H9c2 cardiomyoblasts from H2O2-induced oxidative stress. Four microalgal species were investigated for their antioxidant capacity. A qualitative assessment of oxidative stress in H9c2 cardiomyoblasts stained with DCFH-DA, treated with the highly active microalgae extracts, was performed. The protein expression of total caspase-3 was also examined to investigate whether the extract protects H9c2 cardimyoblasts from H2O2-induced apoptosis. High antioxidant activity was observed for the hexanoic extracts after 10 days of cultivation. Asterarcys quadricellulare exhibited the highest antioxidant capacity of 110.59 ± 1.75 mg TE g-1 dry weight and was tested against H9c2 cardiomyoblasts, which were initially subjected to H2O2-induced oxidative stress. This hexanoic extract protected against H2O2 induced oxidative stress with a similar scavenging capacity as N-Acetylcysteine. Furthermore, total caspase-3 was increased following treatment with the hexanoic extract, suggesting that A. quadricellulare also had anti-apoptotic properties. The outcome of our study highlighted the possible use of the local A. quadricellulare strain QUCCCM10 as a natural, safe, and efficient antioxidant to prevent cardiovascular diseases.

Advanced treatment and Resource recovery of brewery wastewater by Co-cultivation of filamentous microalga Tribonema aequale and autochthonous Bacteria.

To use unicellular microalgae to remove waste nutrients from brewery wastewater while converting them into algal biomass has been explored but high-cost treatment and low-value biomass associated with current technologies have prevented this concept from further attempts. In this study, a filamentous microalga Tribonema aequale was introduced and the alga can grow vigorously in brewery wastewater and algal biomass concentration could be as high as 6.45 g L-1 which can be harvested by a cost-effective filtration method. The alga together with autochthonous bacteria removed majority of waste nutrients from brewery wastewater. Specifically, 85.39% total organic carbon (TOC), 79.53% total dissolved nitrogen (TN), 93.38% ammonia nitrogen (NH3-N) and 71.33% total dissolved phosphorus (TP) in brewery wastewater were rapidly removed by co-cultivation of T. aequale and autochthonous bacteria. Treated wastewater met the national wastewater discharge quality, and resulting algal biomass contained large amounts of high-value products chrysolaminarin, palmitoleic acid (PLA) and eicosapentaenoic acid (EPA). It is anticipated that reduced cost of algal harvesting coupled with value-added biomass could make T. aequale as a promising candidate for brewery wastewater treatment and resource utilization.

Microalgal Biorefinery Concepts' Developments for Biofuel and Bioproducts: Current Perspective and Bottlenecks.

Microalgae have received much interest as a biofuel feedstock. However, the economic feasibility of biofuel production from microalgae does not satisfy capital investors. Apart from the biofuels, it is necessary to produce high-value co-products from microalgae fraction to satisfy the economic aspects of microalgae biorefinery. In addition, microalgae-based wastewater treatment is considered as an alternative for the conventional wastewater treatment in terms of energy consumption, which is suitable for microalgae biorefinery approaches. The energy consumption of a microalgae wastewater treatment system (0.2 kW/h/m3) was reduced 10 times when compared to the conventional wastewater treatment system (to 2 kW/h/m3). Microalgae are rich in various biomolecules such as carbohydrates, proteins, lipids, pigments, vitamins, and antioxidants; all these valuable products can be utilized by nutritional, pharmaceutical, and cosmetic industries. There are several bottlenecks associated with microalgae biorefinery. Hence, it is essential to promote the sustainability of microalgal biorefinery with innovative ideas to produce biofuel with high-value products. This review attempted to bring out the trends and promising solutions to realize microalgal production of multiple products at an industrial scale. New perspectives and current challenges are discussed for the development of algal biorefinery concepts.

A Quantitative Sustainability Assessment of Food Waste Management in the European Union.

In an endeavor to make Europe carbon-neutral, and to foster a circular economy, improving food waste management has been identified by the European Union (EU) as a key factor. In this study, we consider 21 pathways, covering: (i) prevention; (ii) reuse for both human consumption and animal feed; (iii) material recycling as an input into the food and chemical industries; (iv) nutrient recycling; and (v) energy/fuel recovery. To include all types of impact, a sustainability assessment, encompassing environmental, economic, and social pillars, is performed and complemented with societal life cycle costing. The results indicate that after prevention, reuse for human consumption and animal feed is the most preferred option, and, in most cases, nutrient recycling and energy recovery are favored over material recycling for chemical production. While highlighting that the food waste management hierarchy should be supported with quantitative sustainability analyses, the findings also illustrate that biochemical pathways should be improved to be competitive despite the fact that food waste valorization has the potential to satisfy the EU demand for the chemicals investigated. Yet, the results clearly show that the potential benefits of improving emerging technologies would still not eclipse the benefits related to food waste prevention and its redistribution.

Priority-based multiple products from microalgae: review on techniques and strategies.

Microalgal biomass is composed of different valuable metabolites that can satisfy the requirements of renewable biofuels, alternative proteins, carbohydrates, and food grade natural colorants. Production of a specific product from microalgae has been proved to be economically infeasible on the commercial scale except for the production of high-value products (e.g. carotenoids and phycobiliproteins). Therefore, the simultaneous extraction of multiple products is essential to bring pragmatism for the production of biofuels, proteins, and carbohydrate derived products from microalgal biomass. In order to obtain multiple products, various strategies have been implemented using potential techniques of cell disruption and biomass fractionation based on the priorities of products. Conventional approaches of downstream processing have often proved to be inefficient in the case of integrated fractionation systems. This is attributable to the divergent nature of the intracellular metabolites of microalgae and their vulnerability toward the different chemicals and conditions of those downstream processes. However, three phase partitioning (TPP), aqueous two-phase separation, membrane separation, supercritical fluid extraction (SFE), and pressurized liquid extraction (PLE) are some of the advanced techniques which have been proved to be useful in this regard. Choice of cell disruption mechanisms is critical for several purposes, such as the selective release of metabolites into a suitable solvent, preservation of bioactivity of molecules and cost-savings. Unfortunately, consolidated report for the fractionation of priority-based products from microalgal biomass using these techniques is lacking. Therefore, in this review, we have critically discussed the different strategies for the priority-based multiple products by implementation of the advanced techniques.

Biorefinery of Biomass of Agro-Industrial Banana Waste to Obtain High-Value Biopolymers.

On a worldwide scale, food demand is increasing as a consequence of global population growth. This makes companies push their food supply chains' limits with a consequent increase in generation of large amounts of untreated waste that are considered of no value to them. Biorefinery technologies offer a suitable alternative for obtaining high-value products by using unconventional raw materials, such as agro-industrial waste. Currently, most biorefineries aim to take advantage of specific residues (by either chemical, biotechnological, or physical treatments) provided by agro-industry in order to develop high-value products for either in-house use or for sale purposes. This article reviews the currently explored possibilities to apply biorefinery-known processes to banana agro-industrial waste in order to generate high-value products out of this residual biomass source. Firstly, the Central and Latin American context regarding biomass and banana residues is presented, followed by advantages of using banana residues as raw materials for the production of distinct biofuels, nanocellulose fibers, different bioplastics, and other high-value products Lastly, additional uses of banana biomass residues are presented, including energy generation and water treatment.

Streptomyces albulus yields ε-poly-L-lysine and other products from salt-contaminated glycerol waste.

Actinomycetes are the most important microorganisms for the industrial production of secondary metabolites with antimicrobial and anticancer properties. However, they have not been implicated in biorefineries. Here, we study the ability of the ε-poly-L-lysine producing Streptomyces albulus BCRC 11814 to utilize biodiesel-derived crude glycerol. S. albulus was cultured in a mineral medium supplemented with up to 10% w/v sodium chloride or potassium chloride, and with crude glycerol as the sole carbohydrate source. Under these conditions, the strain produced 0.1 g ε-poly-L-lysine per 1 g of biomass. RNA sequencing revealed upregulation of the ectoine biosynthetic pathway of S. albulus, which provides proof of halotolerance. S. albulus has several silent secondary metabolite biosynthetic clusters predicted within the genome. Based on the results, we conclude that S. albulus BCRC 11814 is a halotolerant microorganism capable of utilizing biodiesel-derived crude glycerol better than other actinomycetes included in the present study. S. albulus has the potential to be established as microbial platform production host for a range of high-value biological products.

Advances in regenerated cellulosic aerogel from waste cotton textile for emerging multidimensional applications.

Rapid development of society and the improvement of people's living standards have stimulated people's keen interest in fashion clothing. This trend has led to the acceleration of new product innovation and the shortening of the lifespan for cotton fabrics, which has resulting in the accumulation of waste cotton textiles. Although cotton fibers can be degraded naturally, direct disposal not only causes a serious resource waste, but also brings serious environmental problems. Hence, it is significant to explore a cleaner and greener waste textile treatment method in the context of green and sustainable development. To realize the high-value utilization of cellulose II aerogel derived from waste cotton products, great efforts have been made and considerable progress has been achieved in the past few decades. However, few reviews systematically summarize the research progress and future challenges of preparing high-value-added regenerated cellulose aerogels via dissolving cotton and other cellulose wastes. Therefore, this article reviews the regenerated cellulose aerogels obtained through solvent methods, summarizes their structure, preparation strategies and application, aimed to promote the development of the waste textile industry and contributed to the realization of carbon neutrality.

Life cycle analysis of apple pomace biorefining for biofuel and pectin production.

This study investigated the environmental impacts associated with converting apple pomace, a globally abundant resource, into biofuels and high-value products using a comparative consequential life cycle assessment. In three developed scenarios, an acid pretreatment method was applied and the pretreated liquid was used for ethanol and pectin production. The pretreated solids were utilized to produce different products: scenario 1 produced biogas, scenario 2 generated butanol, and scenario 3 yielded both biogas and butanol from the solids. The results demonstrated that scenario 1 exhibited the best performance compared to the other two scenarios, imposing the lowest environmental burdens across all damage categories, including human health, ecosystems, and resources. Despite the induced impacts, the benefits of avoided products, i.e., ethanol, natural gas, butanol, acetone, and pectin, compensated for these induced environmental impacts to some extent. The results also revealed that among all products generated through the biorefineries, first-generation ethanol substitution had the most significant positive environmental impacts. Overall, the biorefinery developed in scenario 1 represents the most feasible strategy for a circular bioeconomy. It performs 84.38 % and 72.98 % better than scenarios 2 and 3 in terms of human health, 85.34 % and 74.54 % better in terms of ecosystems, and more than 100 % better in terms of resources. Conversely, scenario 2 resulted in the highest net impacts across all damage categories. Furthermore, in scenario 1, the midpoint results showed 83.10 % and 71.08 % lower impacts on global warming, 85.15 % and 74.17 % lower impacts on terrestrial acidification, and 99.26 % and 98.53 % lower impacts on fossil resource scarcity compared to scenarios 2 and 3, respectively. In conclusion, the first scenario shows promise for the sustainable valorization of apple pomace.

Bacterial transformation of lignin: key enzymes and high-value products.

Lignin, a natural organic polymer that is recyclable and inexpensive, serves as one of the most abundant green resources in nature. With the increasing consumption of fossil fuels and the deterioration of the environment, the development and utilization of renewable resources have attracted considerable attention. Therefore, the effective and comprehensive utilization of lignin has become an important global research topic, with the goal of environmental protection and economic development. This review focused on the bacteria and enzymes that can bio-transform lignin, focusing on the main ways that lignin can be utilized to produce high-value chemical products. Bacillus has demonstrated the most prominent effect on lignin degradation, with 89% lignin degradation by Bacillus cereus. Furthermore, several bacterial enzymes were discussed that can act on lignin, with the main enzymes consisting of dye-decolorizing peroxidases and laccase. Finally, low-molecular-weight lignin compounds were converted into value-added products through specific reaction pathways. These bacteria and enzymes may become potential candidates for efficient lignin degradation in the future, providing a method for lignin high-value conversion. In addition, the bacterial metabolic pathways convert lignin-derived aromatics into intermediates through the "biological funnel", achieving the biosynthesis of value-added products. The utilization of this "biological funnel" of aromatic compounds may address the heterogeneous issue of the aromatic products obtained via lignin depolymerization. This may also simplify the separation of downstream target products and provide avenues for the commercial application of lignin conversion into high-value products.

Unlocking Efficient Hydrogen Production: Nucleophilic Oxidation Reactions Coupled with Water Splitting.

Electrocatalytic water splitting driven by sustainable energy is a clean and promising water-chemical fuel conversion technology for the production of high-purity green hydrogen. However, the sluggish kinetics of anodic oxygen evolution reaction (OER) pose challenges for large-scale hydrogen production, limiting its efficiency and safety. Recently, the anodic OER has been replaced by a nucleophilic oxidation reaction (NOR) with biomass as the substrate and coupled with a hydrogen evolution reaction (HER), which has attracted great interest. Anode NOR offers faster kinetics, generates high-value products, and reduces energy consumption. By coupling NOR with hydrogen evolution reaction, hydrogen production efficiency can be enhanced while yielding high-value oxidation products or degrading pollutants. Therefore, NOR-coupled HER hydrogen production is another new green electrolytic hydrogen production strategy after electrolytic water hydrogen production, which is of great significance for realizing sustainable energy development and global decarbonization. This review explores the potential of nucleophilic oxidation reactions as an alternative to OER and delves into NOR mechanisms, guiding future research in NOR-coupled hydrogen production. It assesses different NOR-coupled production methods, analyzing reaction pathways and catalyst effects. Furthermore, it evaluates the role of electrolyzers in industrialized NOR-coupled hydrogen production and discusses future prospects and challenges. This comprehensive review aims to advance efficient and economical large-scale hydrogen production.

Role of Nb2O5 Crystal Phases on the Photocatalytic Conversion of Lignin Model Molecules and Selectivity for Value-Added Products.

The photocatalytic conversion in aqueous media of phenol and guaiacol as a lignin model compound using Nb2O5 with different crystal phases was studied. Nb2O5 particles were synthesized using hydrothermal methods, where it was observed that changes in the solvent control their morphology and crystal phase. Different photocatalytic behavior of Nb2O5 was observed with the selected model compounds, indicating that its selection directly impacts the resulting conversion and selectivity rates as well as the reaction pathway, highlighting the relevance of model molecule selection. Photocatalytic conversion of phenol showed conversion rate (C%) up to 25 % after 2 h irradiation and high selectivity (S%) to pyrogallol (up to 50 %). Orthorhombic Nb2O5 spheres favored conversion through free hydroxyl radicals while monoclinic rods did not convert phenol. Guaiacol photocatalytic oxidation showed high conversion rate but lower selectivity. Orthorhombic and monoclinic Nb2O5 favored the formation of resorcinol with S % ~0.43 % (C % ~33 %) and ~13 % (C % ~27 %) respectively. The mixture of both phases enhanced the guaiacol conversion rate to ~55 % with ~17 % of selectivity to salicylaldehyde. The use of radical scavengers provided information to elucidate the reaction pathway for these model compounds, showing that different reaction pathways may be obtained for the same photocatalyst if the model compound is changed.

Strategies for producing high value small molecules in microalgae.

Eukaryotic microalgae are a diverse group of organisms that can be used for the sustainable production of a wide range of high value compounds, including lipids, flavours and dyes, bioplastics, and cosmetics. Optimising total biomass production often does not lead to optimal product yield and more sophisticated biphasic growth strategies are needed, introducing specific stresses to induce product synthesis. Genetic tools have been used to increase yields of natural products or to introduce new pathways to algae, and wider deployment of these tools offers promising routes for commercial production of high value compounds utilising minimal inputs.

Current recycling strategies and high-value utilization of waste cotton.

The rapid development of the textile industry and improvement of people's living standards have led to the production of cotton textile and simultaneously increased the production of textile wastes. Cotton is one of the most common textile materials, and the waste cotton accounts for 24% of the total textile waste. To effectively manage the waste, recycling and reusing waste cotton are common practices to reduce global waste production. This paper summarizes the characteristics of waste cotton and high-value products derived from waste cotton (e.g., yarns, composite reinforcements, regenerated cellulose fibers, cellulose nanocrystals, adsorptive materials, flexible electronic devices, and biofuels) via mechanical, chemical, and biological recycling methods. The advantages and disadvantages of making high-value products from waste cotton are summarized and discussed. New technologies and products for recycling waste cotton are proposed, providing a guideline and direction for merchants and researchers. This review paper can shed light on converting textile wastes other than cotton (e.g., bast, silk, wool, and synthetic fibers) into value-added products.

Elucidating microalgae-mediated metabolism for sulfadiazine removal mechanism and transformation pathways.

Sulfadiazine (SDZ) as a typical sulfonamide antibiotic is commonly detected in wastewater, and its removal mechanism and transformation pathways in microalgae-mediated system remain unclear. In this study, the SDZ removal through hydrolysis, photodegradation, and biodegradation by Chlorella pyrenoidosa was investigated. Higher superoxide dismutase activity and biochemical components accumulation were obtained under SDZ stress. The SDZ removal efficiencies at different initial concentrations were 65.9-67.6%, and the removal rate followed pseudo first-order kinetic model. Batch tests and HPLC-MS/MS analyses suggested that biodegradation and photodegradation through the reactions of amine group oxidation, ring opening, hydroxylation, and the cleavage of S-N, C-N, C-S bond were dominant removal mechanisms and pathways. Characteristics of transformation products were evaluated to analyze their environmental impacts. High-value products of lipid, carbohydrate, and protein in microalgae biomass presented economic potential of microalgae-mediated metabolism for SDZ removal. The findings of this study broadened the knowledge for the microalgae self-protection from SDZ stress and provided a deep insight into SDZ removal mechanism and transformation pathways.

Food waste biorefinery towards circular economy in Australia.

Staggering amounts of food waste are produced in Australia, and this review provides food waste based biorefinery opportunities in moving towards a circular economy in Australia. The current food waste scenario in Australia including an overview of primary food waste sources, government regulation, and current management practices is presented. The major food waste streams include fruit and vegetable (waste from wine grapes, citrus, apple, potato, and tomato), nuts (almond processing waste), seafood (Fish waste), dairy whey, sugarcane bagasse, and household and businesses. The composition of these waste streams indicated their potential for use in biorefineries to produce value-added products via various pathways combining direct extraction and biological and thermochemical conversion. Finally, the efforts made in Australia to utilize food waste as a resource, as well as the challenges and future directions to promote the development of concrete and commercially viable technologies for food waste biorefinery, are described.

Effect of mariculture wastewater concentrations on high-value production and pollutants removal with bacterial-algal coupling reactor (BACR).

To achieve the goal of cost-effective mariculture wastewater treatment, a novel Bacteria-Algae Coupling Reactor (BACR) integrating acidogenic fermentation with microalgae cultivation was applied for the mariculture wastewater treatment. Currently, there is limited research on the impact of different concentrations of mariculture wastewater on the pollutant removal and the high-value products recovery. In this study, different concentrations (4, 6, 8, and 10 g/L) of mariculture wastewater were treated with BACR. The results showed thatoptimalMW concentrations of 8 g/L improved the growth viability and biochemical components synthetic of Chlorella vulgaris, which increased the potential for high-value products recovery. The BACR exhibited the excellent removal efficiency of chemical oxygen demand, ammonia-nitrogen and total phosphorus with 82.30%, 81.12% and 96.40%, respectively. This study offers an ecological and economic approach to improve the MW treatment through the utilization of a novel bacterial-algal coupling system.

Algae biorefinery: A promising approach to promote microalgae industry and waste utilization.

Microalgae have a number of intriguing characteristics that make them a viable raw material aimed at usage in a variety of applications when refined using a bio-refining process. They offer unique capabilities that allow them to be used in biotechnology-related applications. As a result, this review explores how to increase the extent to which microalgae may be integrated with various additional biorefinery uses in order to improve their maintainability. In this study, the use of microalgae as potential animal feed, manure, medicinal, cosmeceutical, ecological, and other biotechnological uses is examined in its entirety. It also includes information on the boundaries, openings, and improvements of microalgae and the possibilities of increasing the range of microalgae through techno-economic analysis. According to the findings of this review, financing supported research and shifting the focus of microalgal investigations from biofuels production to biorefinery co-products can help guarantee that they remain a viable resource. Furthermore, innovation collaboration is unavoidable if one wishes to avoid the high cost of microalgae biomass handling. This review is expected to be useful in identifying the possible role of microalgae in biorefinery applications in the future.