Boosting Efficient Alkaline Hydrogen Evolution Reaction of CoFe-Layered Double Hydroxides Nanosheets via Co-Coordination Mechanism of W-Doping and Oxygen Defect Engineering.

While surface defects and heteroatom doping exhibit promising potential in augmenting the electrocatalytic hydrogen evolution reaction (HER), their performance remains unable to rival that of the costly Pt-based catalysts. Yet, the concurrent modification of catalysts by integrating both approaches stands as a promising strategy to effectively address the aforementioned limitation. In this work, tungsten dopants are introduced into self-supported CoFe-layered double hydroxides (LDH) on nickel foam using a hydrothermal method, and oxygen vacancies (Ov) are further introduced through calcination. The analysis results demonstrated that tungsten doping reduces the Ov formation energy of CoFeW-LDH. The Ov acted as oxophilic sites, facilitating water adsorption and dissociation, and reducing the barrier for cleaving HO─H bonds from 0.64 to 0.14 eV. Additionally, Ov regulated the electronic structure of CoFeW-LDH to endow optimized hydrogen binding ability on tungsten atoms, thereby accelerating alkaline Volmer and Heyrovsky reaction kinetics. Specifically, the abundance of Ov induced a transition of tungsten from a six-coordinated to highly active four-coordinated structure, which becomes the active site for HER. Consequently, an ultra-low overpotential of 41 mV at 10 mA cm-2, and a low Tafel slope of 35 mV dec-1 are achieved. These findings offer crucial insights for the design of efficient HER electrocatalysts.

Universal Platform for Robust Dual-Atom Doped 2D Catalysts with Superior Hydrogen Evolution in Wide pH Media.

Layered 2D transition metal dichalcogenides (TMDs) have been suggested as efficient substitutes for Pt-group metal electrocatalysts in the hydrogen evolution reaction (HER). However, poor catalytic activities in neutral and alkaline electrolytes considerably hinder their practical applications. Furthermore, the weak adhesion between TMDs and electrodes often impedes long-term durability and thus requires a binder. Here, a universal platform is reported for robust dual-atom doped 2D electrocatalysts with superior HER performance over a wide pH range media. V:Co-ReS2 on a wafer scale is directly grown on oxidized Ti foil by a liquid-phase precursor-assisted approach and subsequently used as highly efficient electrocatalysts. The catalytic performance surpasses that of Pt group metals in a high current regime (≥ 100 mA cm-2) at pH ≥ 7, with a high durability of more than 70 h in all media at 200 mA cm-2. First-principles calculations reveal that V:Co dual doping in ReS2 significantly reduces the water dissociation barrier and simultaneously enables the material to achieve the thermoneutral Gibbs free energy for hydrogen adsorption.

Enhanced Electrochemical CO2 Reduction to Formate over Phosphate-Modified In: Water Activation and Active Site Tuning.

Electrochemical CO2 reduction reaction (CO2RR) offers a sustainable strategy for producing fuels and chemicals. However, it suffers from sluggish CO2 activation and slow water dissociation. In this work, we construct a (P-O)δ- modified In catalyst that exhibits high activity and selectivity in electrochemical CO2 reduction to formate. A combination of in situ characterizations and kinetic analyses indicate that (P-O)δ- has a strong interaction with K+(H2O)n, which effectively accelerates water dissociation to provide protons. In situ attenuated total reflectance surface-enhanced infrared absorption spectroscopy (ATR-SEIRAS) measurements together with density functional theory (DFT) calculations disclose that (P-O)δ- modification leads to a higher valence state of In active site, thus promoting CO2 activation and HCOO* formation, while inhibiting competitive hydrogen evolution reaction (HER). As a result, the (P-O)δ- modified oxide-derived In catalyst exhibits excellent formate selectivity across a broad potential window with a formate Faradaic efficiency as high as 92.1 % at a partial current density of ~200 mA cm-2 and a cathodic potential of -1.2 V vs. RHE in an alkaline electrolyte.

Cobalt Single-Atom Reverse Hydrogen Spillover for Efficient Electrochemical Water Dissociation and Dechlorination.

Efficient water dissociation to atomic hydrogen (H*) with restrained recombination of H* is crucial for improving the H* utilization for electrochemical dechlorination, but is currently limited by the lack of feasible electrodes. Herein, we developed a monolithic single-atom electrode with Co single atoms anchored on the inherent oxide layer of titanium foam (Co1-TiOx/Ti), which can efficiently dissociate water into H* and simultaneously inhibit the recombination of H*, by taking advantage of the single-atom reverse hydrogen spillover effect. Experimental and theoretical calculations demonstrated that H* could be rapidly generated on the oxide layer of titanium foam, and then overflowed to the adjacent Co single atom for the reductive dechlorination. Using chloramphenicol as a proof-of-concept verification, the resulting Co1-TiOx/Ti monolithic electrode exhibited an unprecedented performance with almost 100 % dechlorination at -1.0 V, far superior to that of traditional indirect reduction-driven commercial Pd/C (52 %) and direct reduction-driven Co1-N-C (44 %). Moreover, its dechlorination rate constant of 1.64 h-1 was 4.3 and 8.6 times more active than those of Pd/C (0.38 h-1) and Co1-N-C (0.19 h-1), respectively. Our research sheds light on the rational design of hydrogen spillover-related electrocatalysts to simultaneously improve the H* generation, transfer, and utilization for environmental and energy applications.

Highly Selective Acetylene-to-Ethylene Electroreduction Over Cd-Decorated Cu Catalyst with Efficiently Inhibited Carbon-Carbon Coupling.

Electrochemical acetylene reduction (EAR) employing Cu catalysts represents an environmentally friendly and cost-effective method for ethylene production and purification. However, Cu-based catalysts encounter product selectivity issues stemming from carbon-carbon coupling and other side reactions. We explored the use of secondary metals to modify Cu-based catalysts and identified Cd decoration as particular effective. Cd decoration demonstrated a high ethylene Faradaic efficiency (FE) of 98.38 % with well-inhibited carbon-carbon coupling reactions (0.06 % for butadiene FE at -0.5 V versus reversible hydrogen electrode) in a 5 vol % acetylene gas feed. Notably, ethylene selectivity of 99.99 % was achieved in the crude ethylene feed during prolonged stability tests. Theoretical calculations revealed that Cd metal accelerates the water dissociation on neighboring Cu surfaces allowing more H* to participate in the acetylene semi-hydrogenation, while increasing the energy barrier for carbon-carbon coupling, thereby contributing to a high ethylene semi-hydrogenation efficiency and significant inhibition of carbon-carbon coupling. This study provides a paradigm for a deeper understanding of secondary metals in regulating the product selectivity of EAR electrocatalysts.

Integrated "Two-in-One" Strategy for High-Rate Electrocatalytic CO2 Reduction to Formate.

The electrochemical CO2 reduction reaction (ECR) is a promising pathway to producing valuable chemicals and fuels. Despite extensive studies reported, improving CO2 adsorption for local CO2 enrichment or water dissociation to generate sufficient H* is still not enough to achieve industrial-relevant current densities. Herein, we report a "two-in-one" catalyst, defective Bi nanosheets modified by CrOx (Bi-CrOx), to simultaneously promote CO2 adsorption and water dissociation, thereby enhancing the activity and selectivity of ECR to formate. The Bi-CrOx exhibits an excellent Faradic efficiency (≈ 100 %) in a wide potential range from ‒0.4 to ‒0.9 V. In addition, it achieves a remarkable formate partial current density of 687 mA cm‒2 at a moderate potential of ‒0.9 V without iR compensation, the highest value at ‒0.9 V reported so far. Control experiments and theoretical simulations revealed that the defective Bi facilitates CO2 adsorption/activation while the CrOx accounts for enhancing the protonation process via accelerating H2O dissociation. This work presents a pathway to boosting formate production through tuning CO2 and H2O species at the same time.

Electronic Structure-Dependent Water-Dissociation Pathways of Ruthenium-Based Catalysts in Alkaline H2 -Evolution.

Ruthenium (Ru)-based catalysts have displayed compelling hydrogen evolution activities, which hold the promising potential to substitute platinum in alkaline H2 -evolution. In the challenging alkaline electrolytes, the water-dissociation process involves multistep reactions, while the profound origin and intrinsic factors of diverse Ru species on water-dissociation pathways and reaction principles remain ambiguous. Here the fundamental origin of water-dissociation pathways of Ru-based catalysts in alkaline media to be from their unique electronic structures in complex coordination environments are disclosed. These theoretical results validate that the modulated electronic structures with delocalization-localization coexistence at their boundaries between the Ru nanocluster and single-atom site have a profound influence on water-dissociation pathways, which push H2 O* migration and binding orientation during the splitting process, thus enhancing the dissociation kinetics. By creating Ru catalysts with well-defined nanocluster, single-atom site, and also complex site, the electrocatalytic data shows that both the nanocluster and single-atom play essential roles in water-dissociation, while the complex site possesses synergistically enhanced roles in alkaline electrolytes. This study discloses a new electronic structure-dependent water-dissociation pathway and reaction principle in Ru-based catalysts, thus offering new inspiration to design efficient and durable catalysts for the practical production of H2 in alkaline electrolytes.

Origin of Limiting and Overlimiting Currents in Bipolar Membranes.

Bipolar membranes (BPMs), a special class of ion exchange membranes with the unique ability to electrochemically induce either water dissociation or recombination, are of growing interest for environmental applications including eliminating chemical dosage for pH adjustment, resource recovery, valorization of brines, and carbon capture. However, ion transport within BPMs, and particularly at its junction, has remained poorly understood. This work aims to theoretically and experimentally investigate ion transport in BPMs under both reverse and forward bias operation modes, taking into account the production or recombination of H+ and OH-, as well as the transport of salt ions (e.g., Na+, Cl-) inside the membrane. We adopt a model based on the Nernst-Planck theory, that requires only three input parameters─membrane thickness, its charge density, and pK of proton adsorption─to predict the concentration profiles of four ions (H+, OH-, Na+, and Cl-) inside the membrane and the resulting current-voltage curve. The model can predict most of the experimental results measured with a commercial BPM, including the observation of limiting and overlimiting currents, which emerge due to particular concentration profiles that develop inside the BPM. This work provides new insights into the physical phenomena in BPMs and helps identify optimal operating conditions for future environmental applications.

Photoaccelerated Water Dissociation Across One-Atom-Thick Electrodes.

Recent experiments demonstrated that interfacial water dissociation (H2O ⇆ H+ + OH-) could be accelerated exponentially by an electric field applied to graphene electrodes, a phenomenon related to the Wien effect. Here we report an order-of-magnitude acceleration of the interfacial water dissociation reaction under visible-light illumination. This process is accompanied by spatial separation of protons and hydroxide ions across one-atom-thick graphene and enhanced by strong interfacial electric fields. The found photoeffect is attributed to the combination of graphene's perfect selectivity with respect to protons, which prevents proton-hydroxide recombination, and to proton transport acceleration by the Wien effect, which occurs in synchrony with the water dissociation reaction. Our findings provide fundamental insights into ion dynamics near atomically thin proton-selective interfaces and suggest that strong interfacial fields can enhance and tune very fast ionic processes, which is of relevance for applications in photocatalysis and designing reconfigurable materials.

Comparison of H2O Adsorption and Dissociation Behaviors on Rutile (110) and Anatase (101) Surfaces Based on ReaxFF Molecular Dynamics Simulation.

The relationship between structure and reactivity plays a dominant role in water dissociation on the various TiO2 crystallines. To observe the adsorption and dissociation behavior of H2O, the reaction force field (ReaxFF) is used to investigate the dynamic behavior of H2O on rutile (110) and anatase (101) surfaces in an aqueous environment. Simulation results show that there is a direct proton transfer between the adsorbed H2O (H2Oad) and the bridging oxygen (Obr) on the rutile (110) surface. Compared with that on the rutile (110) surface, an indirect proton transfer occurs on the anatase (101) surface along the H-bond network from the second layer of water. This different mechanism of water dissociation is determined by the distance between the 5-fold coordinated Ti (Ti5c) and Obr of the rutile and anatase TiO2 surfaces, resulting in the direct or indirect proton transfer. Additionally, the hydrogen bond (H-bond) network plays a crucial role in the adsorption and dissociation of H2O on the TiO2 surface. To describe interfacial water structures between TiO2 and bulk water, the double-layer model is proposed. The first layer is the dissociated H2O on the rutile (110) and anatase (101) surfaces. The second layer forms an ordered water structure adsorbed to the surface Obr or terminal OH group through strong hydrogen bonding (H-bonding). Affected by the H-bond network, the H2O dissociation on the rutile (110) surface is inhibited but that on the anatase (101) surface is promoted.

Boosting the Proton-coupled Electron Transfer via Fe-P Atomic Pair for Enhanced Electrochemical CO2 Reduction.

Single-atom catalysts exhibit superior CO2 -to-CO catalytic activity, but poor kinetics of proton-coupled electron transfer (PCET) steps still limit the overall performance toward the industrial scale. Here, we constructed a Fe-P atom paired catalyst onto nitrogen doped graphitic layer (Fe1 /PNG) to accelerate PCET step. Fe1 /PNG delivers an industrial CO current of 1 A with FECO over 90 % at 2.5 V in a membrane-electrode assembly, overperforming the CO current of Fe1 /NG by more than 300 %. We also decrypted the synergistic effects of the P atom in the Fe-P atom pair using operando techniques and density functional theory, revealing that the P atom provides additional adsorption sites for accelerating water dissociation, boosting the hydrogenation of CO2 , and enhancing the activity of CO2 reduction. This atom-pair catalytic strategy can modulate multiple reactants and intermediates to break through the inherent limitations of single-atom catalysts.

Atomically Local Electric Field Induced Interface Water Reorientation for Alkaline Hydrogen Evolution Reaction.

The slow water dissociation process in alkaline electrolyte severely limits the kinetics of HER. The orientation of H2 O is well known to affect the dissociation process, but H2 O orientation is hard to control because of its random distribution. Herein, an atomically asymmetric local electric field was designed by IrRu dizygotic single-atom sites (IrRu DSACs) to tune the H2 O adsorption configuration and orientation, thus optimizing its dissociation process. The electric field intensity of IrRu DSACs is over 4.00×1010  N/C. The ab initio molecular dynamics simulations combined with in situ Raman spectroscopy analysis on the adsorption behavior of H2 O show that the M-H bond length (M=active site) is shortened at the interface due to the strong local electric field gradient and the optimized water orientation promotes the dissociation process of interfacial water. This work provides a new way to explore the role of single atomic sites in alkaline hydrogen evolution reaction.

Tuning the Microenvironment in Monolayer MgAl Layered Double Hydroxide for CO2 -to-Ethylene Electrocatalysis in Neutral Media.

The electrocatalytic reduction of carbon dioxide provides a feasibility to achieve a carbon-neutral energy cycle. However, there are a number of bottleneck issues to be resolved before industrial application, such as the low conversion efficiency, selectivity and reaction rate, etc. Engineering local environment is a critical way to address these challenges. Here, a monolayer MgAl-LDH was proposed to optimize the local environment of Cu for stimulating industrial-current-density CO2 -to-C2 H4 electroreduction in neutral media. In situ spectroscopic results and theoretical study demonstrated that the Cu electrode modified by MgAl-LDH (MgAl-LDH/Cu) displayed a much higher surface pH value compared to the bare Cu, which could be attributed to the decreased energy barrier for hydrolysis on MgAl-LDH sites with more OH- ions on the surface of the electrode. As a result, MgAl-LDH/Cu achieved a C2 H4 Faradaic efficiency of 55.1 % at a current density up to 300 mA cm-2 in 1.0 M KHCO3 electrolyte.

Boosting Alkaline Hydrogen Evolution Reaction through Water Structure Manipulation.

In the past, the design of efficient electrocatalyst materials for alkaline hydrogen evolution reaction (HER) was mostly focused on tuning the adsorption properties of reaction intermediates. A recent breakthrough shows that the performance can be improved by manipulating water structure at the electrode-electrolyte interface using atomically localized electric fields. The new approach was realized by using IrRu dizygotic single-atom sites and led to a significantly accelerated water dissociation and an overall improved alkaline HER performance. Supported by extensive data from advanced modeling, characterization, and electrochemical measurements, the work delivers an intricate examination of the interaction between water molecules and the catalyst surface, thereby enriching our understanding of water dissociation kinetics and offering new insights to boost overall alkaline HER efficiency.

Synthesis of Uranium Single Atom from Radioactive Wastewater for Enhanced Water Dissociation and Hydrogen Evolution.

As a common nuclide in radioactive wastewater, uranium (U) is generally treated by landfill, which induces the massive abandonment of uranium resources. In this work, a pulse voltammetry method for the synthesis of U single atoms on MoS2 (U/MoS2 ) nanosheets from radioactive wastewater for the electrocatalytic alkaline hydrogen evolution reaction (HER) is reported. The mass loading of U single atoms is facilely controlled with high selectivity for coexisting ions in radioactive wastewater. In the electrolyte of 1 m of KOH, U/MoS2 nanosheets with 5.2% of U single atoms exhibit relatively low overpotentials of 72 mV at 10 mA cm-2 . The mechanistic study reveals that the HER on U/MoS2 includes the water dissociation on U single atoms to form OH* and H transfer from OH* to adjacent S-edge atoms. This procedure exhibits decreased activation energy for transition state in water dissociation and optimized Gibbs free energy for H* adsorption.

Engineering Bimodal Oxygen Vacancies and Pt to Boost the Activity Toward Water Dissociation.

Water dissociation is the rate-limiting step of several energy-related reactions due to the high energy barrier required for breaking the oxygen-hydrogen bond. In this work, a bimodal oxygen vacancy (VO ) catalysis strategy is adopted to boost the efficient water dissociation on Pt nanoparticles. The single facet-exposed TiO2 surface and NiOx nanocluster possess two modes of VO different from each other. In ammonia borane hydrolysis, the highest catalytic activity among Pt-based materials is achieved with the turnover frequency of 618 min-1 under alkaline-free conditions at 298 K. Theoretical simulation and characterization analyses reveal that the bimodal VO significantly promotes the water dissociation in two ways. First, an ensemble-inducing effect of Pt and VO in TiO2 drives the activation of water molecules. Second, an electron promoter effect induced by the electron transfer from VO in NiOx to Pt further enhances the ability of Pt to dissociate water and ammonia borane. This insight into bimodal VO catalysis establishes a new avenue to rationally design heterogeneous catalytic materials in the energy chemistry field.

Oxygen-Induced Dissociation of a Single Water Molecule in Confined 2-D Layers: A Semiempirical Study.

Semiempirical quantum mechanical methods provide a middle ground to molecule-surface interactions between computationally demanding full ab initio quantum chemistry calculations and force-field calculations. In the present study, the PM7 semiempirical method is used to evaluate the adsorption energy values of X@h-BN monolayer [X=O, OH, and H2 O], followed by a mechanistic study of oxygen-induced water dissociation on a free-standing h-BN monolayer. Based on oxygen adsorption configurations, two reaction pathways for water dissociation are studied that yield two distinct configurations of double OH-functionalized h-BN monolayer. The effect of a graphene cover layer on these proposed mechanistic pathways is then investigated by placing the graphene cover layer on the top of the h-BN monolayer and continuously tuning the separation (dGr/h-BN ) between these two layers.

Single Molecular Reaction of Water on a ZnO Surface.

The dissociation of a single water molecule on a ZnO(101̅0) surface has been investigated at the atomic level by low temperature STM manipulation combined with DFT calculations. The positive pulses applied from the tip inject electrons into the system and break the bonding between water and the ZnO surface, thus leading to the hopping of water molecules. Negative pulses inject holes wherein the lower energy ones split the free O-H bond pointing out of the surface whereas the higher energy ones split the second O-H bond that is directed to the surface through hydrogen bonding. Moreover, the yielded proton and hydroxyl species present distinctly charged status through different reaction pathways, manifesting their unique impacts on tailoring the surface properties of the metal oxide.

Rationally Designing Efficient Electrocatalysts for Direct Seawater Splitting: Challenges, Achievements, and Promises.

Directly splitting seawater to produce hydrogen provides a promising pathway for energy and environmental sustainability. However, current seawater splitting faces many challenges because of the sluggish kinetics, the presence of impurities, membrane contamination, and the competitive chloride oxidation reaction at the anode, which makes it more difficult than freshwater splitting. This Review firstly introduces the basic mechanisms of the anode and cathode reactions during seawater splitting. We critically analyze the primary principles for designing catalysts for seawater splitting in terms of both the hydrogen and oxygen evolution reactions, including with noble metal, noble metal free, and metal-free catalysts. Strategies to design effective catalysts, such as active site population, synergistic effect regulation, and surface engineering, are discussed. Furthermore, promises, perspectives, and challenges in developing seawater splitting technologies for clean hydrogen generation are summarized.

Insights into the Interfacial Lewis Acid-Base Pairs in CeO2 -Loaded CoS2 Electrocatalysts for Alkaline Hydrogen Evolution.

Despite the known efficacy of CeO2 as a promoter in alkaline hydrogen evolution reaction (HER), the underlying mechanism of this effect remains unclear. CoS2 , a pyrite-type alkaline HER electrocatalyst, suffers from sluggish HER kinetics and severe catalyst leaching due to its weak water dissociation kinetics and oxygen-related corrosion. Herein, it is demonstrated that the interfacial Lewis acid-base Ce∙∙∙S pairs in CeO2 -loaded CoS2 effectively improve the catalytic activity and durability. In CeO2 -loaded CoS2 nanowire array electrodes, these interfacial Lewis acid-base Ce∙∙∙S pairs with unique electronic and structural configurations efficiently activate water adsorptive dissociation and kinetically accelerate hydrogen evolution, delivering a low overpotential of 36 mV at 10 mA cm-2 in alkaline media. Such Ce∙∙∙S pairs also weaken O2 adsorption on CoS2 , leading to undecayed activity over 1000 h. These findings are expected to provide guidance for the design of CeO2 -based electrocatalysts as well as other hybrid electrocatalysts for water splitting.