Zirconium Carbide Mediates Coke-Resistant Methane Dry Reforming on Nickel-Zirconium Catalysts.

Graphitic deposits anti-segregate into Ni0 nanoparticles to provide restored CH4 adsorption sites and near-surface/dissolved C atoms, which migrate to the Ni0 /ZrO2 interface and induce local Zrx Cy formation. The resulting oxygen-deficient carbidic phase boundary sites assist in the kinetically enhanced CO2 activation toward CO(g). This interface carbide mechanism allows for enhanced spillover of carbon to the ZrO2 support, and represents an alternative catalyst regeneration pathway with respect to the reverse oxygen spillover on Ni-CeZrx Oy catalysts. It is therefore rather likely on supports with limited oxygen storage/exchange kinetics but significant carbothermal reducibility.

New Insights towards High-Temperature Ethanol-Sensing Mechanism of ZnO-Based Chemiresistors.

In this work, we investigate ethanol (EtOH)-sensing mechanisms of a ZnO nanorod (NRs)-based chemiresistor using a near-ambient-pressure X-ray photoelectron spectroscopy (NAP-XPS). First, the ZnO NRs-based sensor was constructed, showing good performance on interaction with 100 ppm of EtOH in the ambient air at 327 °C. Then, the same ZnO NRs film was investigated by NAP-XPS in the presence of 1 mbar oxygen, simulating the ambient air atmosphere and O2/EtOH mixture at the same temperature. The partial pressure of EtOH was 0.1 mbar, which corresponded to the partial pressure of 100 ppm of analytes in the ambient air. To better understand the EtOH-sensing mechanism, the NAP-XPS spectra were also studied on exposure to O2/EtOH/H2O and O2/MeCHO (MeCHO = acetaldehyde) mixtures. Our results revealed that the reaction of EtOH with chemisorbed oxygen on the surface of ZnO NRs follows the acetaldehyde pathway. It was also demonstrated that, during the sensing process, the surface becomes contaminated by different products of MeCHO decomposition, which decreases dc-sensor performance. However, the ac performance does not seem to be affected by this phenomenon.

In Situ Spectroscopy and Microscopy Insights into the CO Oxidation Mechanism on Au/CeO2(111).

In this work, we prepared and investigated in ultra-high vacuum (UHV) two stoichiometric CeO2(111) surfaces containing low and high amounts of step edges decorated with 0.05 ML of gold using synchrotron-radiation photoelectron spectroscopy (SRPES) and scanning tunneling microscopy (STM). The UHV study helped to solve the still unresolved puzzle on how the one-monolayer-high ceria step edges affect the metal-substrate interaction between Au and the CeO2(111) surface. It was found that the concentration of ionic Au+ species on the ceria surface increases with increasing number of ceria step edges and is not correlated with the concentration of Ce3+ ions that are supposed to form on the surface after its interaction with gold nanoparticles. We associated this with an additional channel of Au+ formation on the surface of CeO2(111) related to the interaction of Au atoms with various peroxo oxygen species formed at the ceria step edges during the film growth. The study of CO oxidation on the highly stepped Au/CeO2(111) model sample was performed by combining near-ambient-pressure X-ray photoelectron spectroscopy (NAP-XPS), UHV-STM, and near-ambient-pressure STM (NAP-STM). This powerful combination provided comprehensive information on the processes occurring on the Au/CeO2(111) surface during the interaction with CO, O2, and CO + O2 (1:1) mixture at conditions close to the real working conditions of CO oxidation. It was found that the system demonstrates high stability in CO. However, the surface undergoes substantial chemical and morphological changes as the O2 is added to the reaction cell. Already at 300 K, gold nanoparticles begin to grow using a mechanism that involves the disintegration of small gold nanoparticles in favor of the large ones. With increasing temperature, the model catalyst quickly transforms into a system of primarily large Au particles that contains no ionic gold species.

Comparative Study of NAP-XPS and Cryo-XPS for the Investigation of Surface Chemistry of the Bacterial Cell-Envelope.

Bacteria generally interact with the environment via processes involving their cell-envelope. Thus, techniques that may shed light on their surface chemistry are attractive tools for providing an understanding of bacterial interactions. One of these tools is Al Kα-excited photoelectron spectroscopy (XPS) with its estimated information depth of <10 nm. XPS-analyses of bacteria have been performed for several decades on freeze-dried specimens in order to be compatible with the vacuum in the analysis chamber of the spectrometer. A limitation of these studies has been that the freeze-drying method may collapse cell structure as well as introduce surface contaminants. However, recent developments in XPS allow for analysis of biological samples at near ambient pressure (NAP-XPS) or as frozen hydrated specimens (cryo-XPS) in vacuum. In this work, we have analyzed bacterial samples from a reference strain of the Gram-negative bacterium Pseudomonas fluorescens using both techniques. We compare the results obtained and, in general, observe good agreement between the two techniques. Furthermore, we discuss advantages and disadvantages with the two analysis approaches and the output data they provide. XPS reference data from the bacterial strain are provided, and we propose that planktonic cells of this strain (DSM 50090) are used as a reference material for surface chemical analysis of bacterial systems.

Reversible Water-Induced Phase Changes of Cobalt Oxide Nanoparticles.

Cobalt oxides have been identified as highly active catalysts for the electrochemical water splitting and oxygen evolution reaction. Using near-ambient pressure resonant photoelectron spectroscopy, we studied changes in the metal-oxygen coordination of size-selected core-shell CoOx nanoparticles induced by liquid water. In dry conditions, the nanoparticles exhibit an octahedrally coordinated Co2+ core and a tetrahedrally coordinated Co2+ shell. In the presence of liquid water, we observe a reversible phase change of the nanoparticle shell into octahedrally coordinated Co2+ as well as partially oxidized octahedrally coordinated Co3+. This is in contrast to previous findings, suggesting an irreversible phase change of tetrahedrally coordinated Co2+ after the oxygen evolution reaction conditioning. Our results demonstrate the appearance of water-induced structural changes different from voltage-induced changes and help us to understand the atomic scale interaction of CoOx nanoparticles with water in electrochemical processes.

PEALD of HfO2 Thin Films: Precursor Tuning and a New Near-Ambient-Pressure XPS Approach to in Situ Examination of Thin-Film Surfaces Exposed to Reactive Gases.

A bottom-up approach starting with the development of new Hf precursors for plasma-enhanced atomic layer deposition (PEALD) processes for HfO2 followed by in situ thin-film surface characterization of HfO2 upon exposure to reactive gases via near-ambient-pressure X-ray photoelectron spectroscopy (NAP-XPS) is reported. The stability of thin films under simulated operational conditions is assessed, and the successful implementation of HfO2 dielectric layers in metal-insulator-semiconductor (MIS) capacitors is demonstrated. Among the series of newly synthesized mono-guanidinato-tris-dialkyl-amido class of Hf precursors, one of them, namely, [Hf{η2-(iPrN)2CNEtMe}(NEtMe)3], was representatively utilized with oxygen plasma, resulting in a highly promising low-temperature PEALD process at 60 °C. The new precursors were synthesized in the multigram scale and thoroughly characterized by thermogravimetric analyses, revealing high and tunable volatility reflected by appreciable vapor pressures and accompanied by thermal stability. Typical ALD growth characteristics in terms of linearity, saturation, and a broad ALD window with constant growth of 1.06 Å cycle-1 in the temperature range of 60-240 °C render this process very promising for fabricating high-purity smooth HfO2 layers. For the first time, NAP-XPS surface studies on selected HfO2 layers are reported upon exposure to reactive H2, O2, and H2O atmospheres at temperatures of up to 500 °C revealing remarkable stability against degradation. This can be attributed to the absence of surface defects and vacancies. On the basis of these promising results, PEALD-grown HfO2 films were used as dielectric layers in the MIS capacitor device fabrication exhibiting leakage current densities less than 10-7 A cm-2 at 2 MV cm-1 and permittivities of up to 13.9 without postannealing.

Understanding the CO Oxidation on Pt Nanoparticles Supported on MOFs by Operando XPS.

Metal-organic frameworks (MOFs) are playing a key role in developing the next generation of heterogeneous catalysts. In this work, near ambient pressure X-ray photoelectron spectroscopy (NAP-XPS) is applied to study in operando the CO oxidation on Pt@MOFs (UiO-67) and Pt@ZrO2 catalysts, revealing the same Pt surface dynamics under the stoichiometric CO/O2 ambient at 3 mbar. Upon the ignition at ca. 200 °C, the signature Pt binding energy (BE) shift towards the lower BE (from 71.8 to 71.2 eV) is observed for all catalysts, confirming metallic Pt nanoparticles (NPs) as the active phase. Additionally, the plug-flow light-off experiments show the superior activity of the Pt@MOFs catalyst in CO oxidation than the control Pt@ZrO2 catalyst with ca. 28 % drop in the T 50% light-off temperature, as well as high stability, due to their sintering-resistance feature. These results provide evidence that the uniqueness of MOFs as the catalyst supports lies in the structural confinement effect.

Promoter Effect of Early Stage Grown Surface Oxides: A Near-Ambient-Pressure XPS Study of CO Oxidation on PtSn Bimetallics.

The knowledge of the catalyst active phase on the atomic scale under realistic working conditions is the key for designing new and more efficient materials. In this context, the investigation of CO oxidation on the bimetallic Pt3Sn(111) surfaces by near-ambient-pressure X-ray photoelectron spectroscopy and density functional theory calculations illustrates how combining advanced methodologies allows the determination of the nature of the active phase. Starting from 300 K and 500 mTorr of oxygen, the progressive formation of surface oxides is observed with increasing temperature: SnO, PtO units first, and SnO2, PtO2 units afterward. For CO oxidation on the (2 × 2) surface, the activity gain is assigned to the build-up of ultrathin domains composed of SnO and SnO2 units. The formation of these early stage surface oxides is entirely supported by a density functional theory analysis. More generally, this study demonstrates how the catalyst surface oxidation and transformation can be better controlled by a relevant choice of environmental conditions.