Atomic coordination environment engineering of bimetallic alloy nanostructures for efficient ammonia electrosynthesis from nitrate.

Electrochemical nitrate reduction reaction (NO3RR) to ammonia has been regarded as a promising strategy to balance the global nitrogen cycle. However, it still suffers from poor Faradaic efficiency (FE) and limited yield rate for ammonia production on heterogeneous electrocatalysts, especially in neutral solutions. Herein, we report one-pot synthesis of ultrathin nanosheet-assembled RuFe nanoflowers with low-coordinated Ru sites to enhance NO3RR performances in neutral electrolyte. Significantly, RuFe nanoflowers exhibit outstanding ammonia FE of 92.9% and yield rate of 38.68 mg h-1 mgcat-1 (64.47 mg h-1 mgRu-1) at -0.30 and -0.65 V (vs. reversible hydrogen electrode), respectively. Experimental studies and theoretical calculations reveal that RuFe nanoflowers with low-coordinated Ru sites are highly electroactive with an increased d-band center to guarantee efficient electron transfer, leading to low energy barriers of nitrate reduction. The demonstration of rechargeable zinc-nitrate batteries with large-specific capacity using RuFe nanoflowers indicates their great potential in next-generation electrochemical energy systems.

Promoting the efficiency and selectivity of NO3--to-NH3 reduction on Cu-O-Ti active sites via preferential glycol oxidation with holes.

The combined reductive and oxidative reaction is the essence of a solar-driven photoredox system. Unfortunately, most of these efforts focus on the specific half-reactions, and the key roles of complete photoredox reactions have been overlooked. Taking the nitrate reduction reaction (NO3-RR) as a typical multiple-electrons involved process, the selective reduction of the NO3- into ammonia (NH3) synthesis with high efficiency is still a grand challenge. Herein, a rational oxidative half-reaction is tailored to achieve the selective conversion of NO3- to NH3 on Cu-O-Ti active sites. Through the coupled NO3-RR with glycol oxidation reaction system, a superior NH3 photosynthesis rate of 16.04 ± 0.40 mmol gcat-1 h-1 with NO3- conversion ratio of 100% and almost 100% of NH3 selectivity is reached on Cu-O-Ti bimetallic oxide cluster-anchored TiO2 nanosheets (CuOx@TNS) catalyst. A combination of comprehensive in situ characterizations and theoretical calculations reveals the molecular mechanism of the synergistic interaction between NO3-RR and glycol oxidation pair on CuOx@TNS. The introduction of glycol accelerates the h+ consumption for the formation of alkoxy (•R) radicals to avoid the production of •OH radicals. The construction of Cu-O-Ti sites facilitates the preferential oxidation of glycol with h+ and enhances the production of e- to participate in NO3-RR. The efficiency and selectivity of NO3--to-NH3 synthesis are thus highly promoted on Cu-O-Ti active sites with the accelerated glycol oxidative half-reaction. This work upgrades the conventional half photocatalysis into a complete photoredox system, demonstrating the tremendous potential for the precise regulation of reaction pathway and product selectivity.

Constructing molecule-metal relay catalysis over heterophase metallene for high-performance rechargeable zinc-nitrate/ethanol batteries.

Zinc-nitrate batteries can integrate energy supply, ammonia electrosynthesis, and sewage disposal into one electrochemical device. However, current zinc-nitrate batteries still severely suffer from the limited energy density and poor rechargeability. Here, we report the synthesis of tetraphenylporphyrin (tpp)-modified heterophase (amorphous/crystalline) rhodium-copper alloy metallenes (RhCu M-tpp). Using RhCu M-tpp as a bifunctional catalyst for nitrate reduction reaction (NO3RR) and ethanol oxidation reaction in neutral solution, a highly rechargeable and low-overpotential zinc-nitrate/ethanol battery is successfully constructed, which exhibits outstanding energy density of 117364.6 Wh kg-1cat, superior rate capability, excellent cycling stability of ~400 cycles, and potential ammonium acetate production. Ex/in situ experimental studies and theoretical calculations reveal that there is a molecule-metal relay catalysis in NO3RR over RhCu M-tpp that significantly facilitates the ammonia selectivity and reaction kinetics via a low energy barrier pathway. This work provides an effective design strategy of multifunctional metal-based catalysts toward the high-performance zinc-based hybrid energy systems.

Free-standing membrane incorporating single-atom catalysts for ultrafast electroreduction of low-concentration nitrate.

The release of wastewaters containing relatively low levels of nitrate (NO3-) results in sufficient contamination to induce harmful algal blooms and to elevate drinking water NO3- concentrations to potentially hazardous levels. In particular, the facile triggering of algal blooms by ultra-low concentrations of NO3- necessitates the development of efficient methods for NO3- destruction. However, promising electrochemical methods suffer from weak mass transport under low reactant concentrations, resulting in long treatment times (on the order of hours) for complete NO3- destruction. In this study, we present flow-through electrofiltration via an electrified membrane incorporating nonprecious metal single-atom catalysts for NO3- reduction activity enhancement and selectivity modification, achieving near-complete removal of ultra-low concentration NO3- (10 mg-N L-1) with a residence time of only a few seconds (10 s). By anchoring Cu single atoms supported on N-doped carbon in a carbon nanotube interwoven framework, we fabricate a free-standing carbonaceous membrane featuring high conductivity, permeability, and flexibility. The membrane achieves over 97% NO3- removal with high N2 selectivity of 86% in a single-pass electrofiltration, which is a significant improvement over flow-by operation (30% NO3- removal with 7% N2 selectivity). This high NO3- reduction performance is attributed to the greater adsorption and transport of nitric oxide under high molecular collision frequency coupled with a balanced supply of atomic hydrogen through H2 dissociation during electrofiltration. Overall, our findings provide a paradigm of applying a flow-through electrified membrane incorporating single-atom catalysts to improve the rate and selectivity of NO3- reduction for efficient water purification.

Interface Engineering of the Cu1.5Mn1.5O4/CeO2 Heterostructure for Highly Efficient Electrocatalytic Nitrate Reduction to Ammonia.

The electrochemical nitrate reduction reaction (NO3RR) is considered a sustainable technology to convert the nitrate pollutants to ammonia. However, developing highly efficient electrocatalysts is necessary and challenging given the slow kinetics of the NO3RR with an eight-electron transfer process. Here, a Cu1.5Mn1.5O4 (CMO)/CeO2 heterostructure with rich interfaces is designed and fabricated through an electrospinning and postprocessing technique. Benefiting from the strong coupling between CMO and CeO2, the optimized CMO/CeO2-2 catalyst presents excellent NO3RR performance, with NH3 Faraday efficiency (FE) up to 93.07 ± 1.45% at -0.481 V vs reversible hydrogen electrode (RHE) and NH3 yield rate up to 48.06 ± 1.32 mg cm-2 h-1 at -0.681 V vs RHE. Theoretical calculations demonstrate that the integration of CeO2 with CMO modulates the adsorption/desorption process of the reactants and intermediates, showing a reduced energy barrier in the rate determination step of NO* to N* and achieving an outstanding NO3RR performance.

Molecular Engineering of Hydrogen-Bonded Organic Framework for Enhanced Nitrate Electroreduction to Ammonia.

Electrocatalytic nitrate reduction is an efficient way to produce ammonia sustainably. Herein, we rationally designed a copper metalloporphyrin-based hydrogen-bonded organic framework (HOF-Cu) through molecular engineering strategies for electrochemical nitrate reduction. As a result, the state-of-the-art HOF-Cu catalyst exhibits high NH3 Faradaic efficiency of 93.8%, and the NH3 production rate achieves a superior activity of 0.65 mmol h-1 cm-2. The in situ electrochemical spectroscopic combined with density functional theory calculations reveals that the dispersed Cu promotes the adsorption of NO3- and the mechanism is followed by deoxidation of NO3- to *NO and accompanied by deep hydrogenation. The generated *H participates in the deep hydrogenation of intermediate with fast kinetics as revealed by operando electrochemical impedance spectroscopy, and the competing hydrogen evolution reaction is suppressed. This research provides a promising approach to the conversion of nitrate to ammonia, maintaining the nitrogen balance in the atmosphere.

Boosting Electrocatalytic Ammonia Synthesis via Synergistic Effect of Iron-Based Single Atoms and Clusters.

Electrocatalytic reduction of nitrate to ammonia (NO3RR) is gaining attention for low carbon emissions and environmental protection. However, low ammonia production rate and poor selectivity have remained major challenges in this multi-proton coupling process. Herein, we report a facile strategy toward a novel Fe-based hybrid structure composed of Fe single atoms and Fe3C atomic clusters that demonstrates outstanding performance for synergistic electrocatalytic NO3RR. By operando synchrotron Fourier transform infrared spectroscopy and theoretical computation, we clarify that Fe single atoms serve as the active site for NO3RR, while Fe3C clusters facilitate H2O dissociation to provide protons (*H) for continued hydrogenation reactions. As a result, the Fe-based electrocatalyst exhibits ammonia Faradaic efficiency of nearly 100%, with a corresponding production rate of 24768 µg h-1 cm-2 at -0.4 V vs RHE, exceeding most reported metal-based catalysts. This research provides valuable guidance toward multi-step reactions.

Cyanobacterial Genomes from a Brackish Coastal Lagoon Reveal Potential for Novel Biogeochemical Functions and Their Evolution.

Cyanobacteria are recognised for their pivotal roles in aquatic ecosystems, serving as primary producers and major agents in diazotrophic processes. Currently, the primary focus of cyanobacterial research lies in gaining a more detailed understanding of these well-established ecosystem functions. However, their involvement and impact on other crucial biogeochemical cycles remain understudied. This knowledge gap is partially attributed to the challenges associated with culturing cyanobacteria in controlled laboratory conditions and the limited understanding of their specific growth requirements. This can be circumvented partially by the culture-independent methods which can shed light on the genomic potential of cyanobacterial species and answer more profound questions about the evolution of other key biogeochemical functions. In this study, we assembled 83 cyanobacterial genomes from metagenomic data generated from environmental DNA extracted from a brackish water lagoon (Chilika Lake, India). We taxonomically classified these metagenome-assembled genomes (MAGs) and found that about 92.77% of them are novel genomes at the species level. We then annotated these cyanobacterial MAGs for all the encoded functions using KEGG Orthology. Interestingly, we found two previously unreported functions in Cyanobacteria, namely, DNRA (Dissimilatory Nitrate Reduction to Ammonium) and DMSP (Dimethylsulfoniopropionate) synthesis in multiple MAGs using nirBD and dsyB genes as markers. We validated their presence in several publicly available cyanobacterial isolate genomes. Further, we identified incongruities between the evolutionary patterns of species and the marker genes and elucidated the underlying reasons for these discrepancies. This study expands our overall comprehension of the contribution of cyanobacteria to the biogeochemical cycling in coastal brackish ecosystems.

In Situ Synthesis of CuxO/N Doped Graphdiyne with Pyridine N Configuration for Ammonia Production via Nitrate Reduction.

Electroreduction of nitrate to ammonia provides an interesting pathway for wastewater treatment and valorization. Cu-based catalysts are active for the conversion of NO3 - to NO2 - but suffer from an inefficient hydrogenation process of NO2 -. Herein, CuxO/N-doped graphdiyne (CuxO/N-GDY) with pyridine N configuration are in situ prepared in one pot. Benefiting from the synergistic effect of pyridinic N in GDY and CuxO, the prepared CuxO/N-GDY tested in a commercial H-cell achieved a faradaic efficiency of 85% toward NH3 at -0.5 V versus RHE with a production rate of 340 µmol h-1 mgcat -1 in 0.1 M KNO3. When integrating the CuxO/N-GDY in an anion exchange membrane flow electrolyzer, a maximum Faradaic efficiency of 89% is achieved at a voltage of 2.3 V and the production rate is 1680 µmol h-1 mgcat -1 at 3.3 V in 0.1 M KNO3 at room temperature. Operation at 40 °C further promoted the overall reaction kinetics of NO3 - to NH3, but penalized its selectivity with respect to hydrogen evolution reaction. The high selectivity and production rate in this device configuration demonstrate its potential for industrial application.

Heterostructured Co-Doped-Cu2O/Cu Synergistically Promotes Water Dissociation for Improved Electrochemical Nitrate Reduction to Ammonia.

Electrochemical nitrate reduction reaction (NO3RR) has recently emerged as a promising approach for sustainable ammonia synthesis and wastewater treatment, while the activity and selectivity for ammonia production have remained low. Herein, rational design and controllable synthesis of heterostructured Co-doped Cu2O/Cu nanoparticles embedded in carbon framework (Co-Cu2O/Cu@C) is reported for NO3RR. The Co-Cu2O/Cu@C exhibits a high ammonia yield rate of 37.86 mg h-1 mg-1 cat. with 98.1% Faraday efficiency, which is higher than those obtained for most of the Cu-based catalysts under similar conditions. Density functional theory calculations indicated that the strong electronic interactions at Cu/Co-Cu2O interface facilitate the N species deoxygenation process and doping of Co promotes water dissociation to generate *H for the N species hydrogenation process, leading to enhanced NO3RR performance. This work provides a new design strategy toward high-performance catalysts toward NO3RR for ammonia generation.

Periodic Defect Engineering of Iron-Nitrogen-Carbon Catalysts for Nitrate Electroreduction to Ammonia.

Iron-nitrogen-carbon single atom catalyst (SAC) is regarded as one of the promising electrocatalysts for NO3 - reduction reaction (NO3 RR) to NH3 due to its high activity and selectivity. However, synergistic effects of topological defects and FeN4 active moiety in Fe-N-C SAC have rarely been investigated. By performing density functional theory (DFT) calculations, 13 defective graphene FeN4 with 585, 484, and 5775 topological line defects are constructed, yielding 585-68-FeN4 with optimal NO3 RR catalytic activity, high selectivity, as well as robust anti-dissolution stability. The high NO3 RR activity on 585-68-FeN4 is well explained by the high valence state of Fe center as well as asymmetric charge distribution on FeN4 moiety influenced by 5- and 8-member rings. This DFT work provides theoretical guidance for engineering NO3 RR performance of iron-nitrogen-carbon catalysts by modulating periodic topological defects.

Structure and Electron Engineering for Nitrate Electrocatalysis to Ammonia: Identification and Modification of Active Sites in Spinel Oxides.

Cobalt spinel oxides, which consist of tetrahedral site (AO4) and octahedral site (BO6), are a potential group of transition metal oxides (TMO) for electrocatalytic nitrate reduction reactions to ammonia (NRA). Identifying the true active site in spinel oxides is crucial to designing advanced catalysts. This work reveals that the CoO6 site is the dominant site for NRA through the site substitution strategy. The suitable electronic configuration of Co at the octahedral site leads to a stronger interaction between the Co d-orbital and the O p-orbital in O-containing intermediates, resulting in a high-efficiency nitrate-to-ammonia reduction. Furthermore, the substitution of metallic elements at the AO4 site can affect the charge density at the BO6 site via the structure of A-O-B. Thereafter, Ni and Cu are introduced to replace the tetrahedral site in spinel oxides and optimize the electronic structure of CoO6. As a result, NiCo2O4 exhibits the best activity for NRA with an outstanding yield of NH3 (15.49 mg cm-2 h-1) and FE (99.89%). This study introduces a novel paradigm for identifying the active site and proposes an approach for constructing high-efficiency electrocatalysts for NRA.

Tuning the Selectivity of Nitrate Reduction via Fine Composition Control of RuPdNP Catalysts.

Herein, aqueous nitrate (NO3 -) reduction is used to explore composition-selectivity relationships of randomly alloyed ruthenium-palladium nanoparticle catalysts to provide insights into the factors affecting selectivity during this and other industrially relevant catalytic reactions. NO3 - reduction proceeds through nitrite (NO2 -) and then nitric oxide (NO), before diverging to form either dinitrogen (N2) or ammonium (NH4 +) as final products, with N2 preferred in potable water treatment but NH4 + preferred for nitrogen recovery. It is shown that the NO3 - and NO starting feedstocks favor NH4 + formation using Ru-rich catalysts, while Pd-rich catalysts favor N2 formation. Conversely, a NO2 - starting feedstock favors NH4 + at ≈50 atomic-% Ru and selectivity decreases with higher Ru content. Mechanistic differences have been probed using density functional theory (DFT). Results show that, for NO3 - and NO feedstocks, the thermodynamics of the competing pathways for N-H and N-N formation lead to preferential NH4 + or N2 production, respectively, while Ru-rich surfaces are susceptible to poisoning by NO2 - feedstock, which displaces H atoms. This leads to a decrease in overall reduction activity and an increase in selectivity toward N2 production. Together, these results demonstrate the importance of tailoring both the reaction pathway thermodynamics and initial reactant binding energies to control overall reaction selectivity.

Solar-Powered Gram-Scale Ammonia Production from Nitrate.

The photoelectrochemical (PEC) method has the potential to be an attractive route for converting and storing solar energy as chemical bonds. In this study, a maximum NH3 production yield of 1.01 g L-1 with a solar-to-ammonia conversion efficiency of 8.17% through the photovoltaic electrocatalytic (PV-EC) nitrate (NO3 -) reduction reaction (NO3 -RR) is achieved, using silicon heterojunction solar cell technology. Additionally, the effect of tuning the operation potential of the PV-EC system and its influence on product selectivity are systematically investigated. By using this unique external resistance tuning approach in the PV-EC system, ammonia production through nitrate reduction performance from 96 to 360 mg L-1 is enhanced, a four-fold increase. Furthermore, the NH3 is extracted as NH4Cl powder using acid stripping, which is essential for storing chemical energy. This work demonstrates the possibility of tuning product selectivity in PV-EC systems, with prospects toward pilot scale on value-added product synthesis.

Deep Electron Redistributions Induced by Dual Junctions Facilitating Electroreduction of Dilute Nitrate to Ammonia.

The electronic states of metal catalysts can be redistributed by the rectifying contact between metal and semiconductor e.g., N-doped carbon (NC), while the interfacial regulation degree is very limited. Herein, a deep electronic state regulation is achieved by constructing a novel double-heterojunctional Co/Co3O4@NC catalyst containing Co/Co3O4 and Co3O4/NC heterojunctions. When used for dilute electrochemical NO3 - reduction reaction (NO3RR), the as-prepared Co/Co3O4@NC exhibits an outstanding Faradaic efficiency for NH3 formation (FENH3) of 97.9%, -0.4 V versus RHE and significant NH3 yield of 303.5 mmol h-1 gcat -1 at -0.6 V at extremely low nitrate concentrations (100 ppm NO3 --N). Experimental and theoretical results reveal that the dual junctions of Co/Co3O4 and Co3O4/NC drive a unidirectional electron transfer from Co to NC (Co→Co3O4→NC), resulting in electron-deficient Co atoms. The electron-deficient Co promotes NO3 - adsorption, the rate-determining step (RDS) for NO3RR, facilitating the dilute NO3RR to NH3. The design strategy provides a novel reference for unidirectional multistage regulation of metal electronic states boosting electrochemical dilute NO3RR, which opens up an avenue for deep electronic state regulation of electrocatalyst breaking the limitation of the electronic regulation degree by rectifying contact.

Pd Clusters Loaded with Multivalent Cu Foam for Superior Electrochemical Nitrate Reduction and Selective N≡N Bond Formation.

The electrochemical denitrification of nitrate (NO3 -) in actual wastewater to nitrogen (N2) is an effective approach to reversing the current imbalance of the nitrogen cycle and the eutrophication of water. However, electrostatic repulsion between NO3 - and the cathode results in the low efficiency of NO3 - reduction reaction (NO3RR). Here, density functional theory (DFT) calculations are used as a theoretical guide to design a Pd cluster-loaded multivalent Cu foam (Pd/Cu2O-CF) electrocatalyst, which achieves a splendid 97.8% NO3 - removal rate, 97.9% N2 selectivity, 695.5 mg N g-1 Pd h-1 reduction efficiency, and 60.0% Faradaic efficiency at -1.3 V versus SCE. The projected density of states (pDOS) indicates that NO3 - and Pd/Cu2O-CF are bonded via strong complexation between the O 2p (in NO3 -) and Cu 3d (in Cu2O) with the input of voltage, which reduces the electrostatic repulsion and enhances the enrichment of NO3 - on the cathode. In-situ characterizations demonstrate that Pd[H] can reduce Cu2O to Cu, and subsequently Cu reduces NO3 - to nitrite (NO2 -) accompanied by in situ reconfiguration of multivalent Cu foam. NO2 - is then transferred to the surface of Pd clusters by the cascade catalysis and accelerates the breaking of N─O bonds to form Pd─N, and eventually achieves the N≡N bond formation.

Oxygen Vacancy-Controlled CuOx/N,Se Co-Doped Porous Carbon via Plasma-Treatment for Enhanced Electro-Reduction of Nitrate to Green Ammonia.

The electrochemical nitrate reduction reaction (NO3RR) is of significance in regards of environmentally friendly issues and green ammonia production. However, relatively low performance with a competitive hydrogen evolution reaction (HER) is a challenge to overcome for the NO3RR. In this study, oxygen vacancy-controlled copper oxide (CuOx) catalysts through a plasma treatment are successfully prepared and supported on high surface area porous carbon that are co-doped with N, Se species for its enhanced electrochemical properties. The oxygen vacancy-increased CuOx catalyst supported on the N,Se co-doped porous carbon (CuOx-H/NSePC) exhibited the highest NO3RR performance with faradaic efficiency (FE) of 87.2% and yield of 7.9 mg cm-2 h-1 for the ammonia production, representing significant enhancements of FE and ammonia yield as compared to the un-doped or the oxygen vacancy-decreased catalysts. This high performance should be attributed to a significant increase in the catalytic active sites with facilitated energetics from strategies of doping the catalytic materials and weakening the N─O bonding strength for the adsorption of NO3 - ions on the modulated oxygen vacancies. This results show a promise that co-doping of heteroatoms and regulating of oxygen vacancies can be key factors for performance enhancement, suggesting new guidelines for effective catalyst design of NO3RR.

Uniting Synergistic Effect of Single-Ni Site and Electric Field of B- Bridged-N for Boosted Electrocatalytic Nitrate Reduction to Ammonia.

Electrochemical conversion of nitrate, a prevalent water pollutant, to ammonia (NH3 ) is a delocalized and green path for NH3 production. Despite the existence of different nitrate reduction pathways, selectively directing the reaction pathway on the road to NH3 is now hindered by the absence of efficient catalysts. Single-atom catalysts (SACs) are extensively investigated in a wide range of catalytic processes. However, their application in electrocatalytic nitrate reduction reaction (NO3 - RR) to NH3 is infrequent, mostly due to their pronounced inclination toward hydrogen evolution reaction (HER). Here, Ni single atoms on the electrochemically active carrier boron, nitrogen doped-graphene (BNG) matrix to modulate the atomic coordination structure through a boron-spanning strategy to enhance the performance of NO3 - RR is designed. Density functional theory (DFT) study proposes that BNG supports with ionic characteristics, offer a surplus electric field effect as compared to N-doped graphene, which can ease the nitrate adsorption. Consistent with the theoretical studies, the as-obtained NiSA@BNG shows higher catalytic activity with a maximal NH3 yield rate of 168 µg h-1  cm-2 along with Faradaic efficiency of 95% and promising electrochemical stability. This study reveals novel ways to rationally fabricate SACs' atomic coordination structure with tunable electronic properties to enhance electrocatalytic performance.

A Wetting and Capture Strategy Overcoming Electrostatic Repulsion for Electroreduction of Nitrate to Ammonia from Low-Concentration Sewage.

Ammonia production by electrocatalytic nitrate reduction reaction (NO3 RR) in water streams is anticipated as a zero-carbon route. Limited by dilute nitrate in natural sewage and the electrostatic repulsion between NO3 - and cathode, NO3 RR can hardly be achieved energy-efficiently. The hydrophilic Cu@CuCoO2 nano-island dispersed on support can enrich NO3 - and produce a sensitive current response, followed by electrosynthesis of ammonia through atomic hydrogen (*H) is reported. The accumulated NO3 - can be partially converted to NO2 - without external electric field input, confirming that the Cu@CuCoO2 nano-island can strongly bind NO3 - and then trigger the reduction via dynamic evolution between Cu-Co redox sites. Through the identification of intermediates and theoretical computation. it is found that the N-side hydrogenation of *NO is the optimal reaction step, and the formation of N─N dimer may be prevented. An NH3 product selectivity of 93.5%, a nitrate conversion of 96.1%, and an energy consumption of 0.079 kWh gNH3 -1 is obtained in 48.9 mg-N L-1 naturally nitrate-polluted streams, which outperforms many works using such dilute nitrate influent. Conclusively, the electrocatalytic system provides a platform to guarantee the self-sufficiency of dispersed ammonia production in agricultural regions.

Electrical-Driven Directed-Evolution of Copper Nanowires Catalysts for Efficient Nitrate Reduction to Ammonia.

The electrocatalytic conversion of nitrate (NO3 - ) to NH3 (NO3 RR) at ambient conditions offers a promising alternative to the Haber-Bosch process. The pivotal factors in optimizing the proficient conversion of NO3 - into NH3 include enhancing the adsorption capabilities of the intermediates on the catalyst surface and expediting the hydrogenation steps. Herein, the Cu/Cu2 O/Pi NWs catalyst is designed based on the directed-evolution strategy to achieve an efficient reduction of NO3 ‾. Benefiting from the synergistic effect of the OV -enriched Cu2 O phase developed during the directed-evolution process and the pristine Cu phase, the catalyst exhibits improved adsorption performance for diverse NO3 RR intermediates. Additionally, the phosphate group anchored on the catalyst's surface during the directed-evolution process facilitates water electrolysis, thereby generating Hads on the catalyst surface and promoting the hydrogenation step of NO3 RR. As a result, the Cu/Cu2 O/Pi NWs catalyst shows an excellent FE for NH3 (96.6%) and super-high NH3 yield rate of 1.2 mol h-1  gcat. -1 in 1 m KOH and 0.1 m KNO3 solution at -0.5 V versus RHE. Moreover, the catalyst's stability is enhanced by the stabilizing influence of the phosphate group on the Cu2 O phase. This work highlights the promise of a directed-evolution approach in designing catalysts for NO3 RR.