A novel nanostructured poly(thionine)-deep eutectic solvent/CuO nanoparticle film-modified disposable pencil graphite electrode for determination of acetaminophen in the presence of ascorbic acid.

A new electrochemical sensor based on thionine (TH), an electroactive polymer, and CuO nanoparticle (CuONP)-modified pencil graphite electrode (PGE) has been developed. Poly(thionine) (PTH) was formed on the CuO/PGE surface by electropolymerisation in ethaline deep eutectic solvent (DES) containing acetic acid dopant to form PTHEthaline/CuO/PGE. Cyclic voltammetry, electrochemical impedance spectroscopy, and differential pulse voltammetry were utilized to evaluate the fabrication process, electrochemical properties, and performance parameters of the modified electrodes. The analytical performance of the PTHEthaline/CuO/PGE was evaluated with respect to linear range, limit of detection, repeatability, and reproducibility for the detection of acetaminophen (APAP) by electrooxidation in the presence of ascorbic acid (AA). Analytical parameters such as pH were optimized. The combined use of PTH and CuONP led to enhanced performance towards APAP due to the large electroactive surface area and synergistic catalytic effect, with a wide linear working range and low detection limit. The reliability of the proposed sensor for the detection of APAP was successfully tested in pharmaceutical samples containing APAP and AA, with very good recoveries. Graphical abstract.

REPORT: IR study of degradation of acetaminophen by iron nano-structured catalyst.

Full degradation of acetaminophen (paracetamol) in aqueous solution was investigated at room temperature through heterogeneous iron nano-structured as catalyst in this article. Iron Nano-structured was prepared through simple hydrothermal processes using Iron oxide (Fe2O3) as precursor. The catalytic activity of as prepared Nano-catalyst (NC) was investigated in the degradation of the acetaminophen as an environmental pollutant, commonly called paracetamol, under different operating parameters like pH, dosages of acetaminophen and dose of NC. Remarkable differences in IR spectra were observed after reaction which showed complete degradation of 15 ppm of Acetaminophen using 0.1 g of nano-structured with the recovery of NC followed by its activity four times with full catalytic performance.

Synthesis of bifunctional cabbage flower-like Ho3+/NiO nanostructures as a modifier for simultaneous determination of methotrexate and carbamazepine.

Cabbage flower-like Ho3+/NiO nanostructure (CFL-Ho3+/NiO NSs) with significant electrocatalytic oxidation has been published for the first time. First, structure and morphology of CFL-Ho3+/NiO-NSs have been described by XRD, SEM, and EDX methods. Then, CFL-Ho3+/NiO-NSs have been applied as a modifier for simultaneous electrochemical detection of methotrexate (MTX) and carbamazepine (CBZ). Functions of the modified electrode have been dealt with through electrochemical impedance spectroscopy (EIS). It has been demonstrated that the electrode response has been linear from 0.001-310.0 µM with a limit of detection of 5.2 nM and 4.5 nM (3 s/m) through DPV for MTX and CBZ. Diffusion coefficient (D) and heterogeneous rate constant (kh) have been detected for MTX and CBZ oxidation at the surface of the modified electrode. Moreover, CFL-Ho3+/NiO-NS/GCE has been employed for determining MTX and CBZ in urine and drug specimens. Outputs showed the analyte acceptable recovery. Therefore, the electrode could be applied to analyze both analytes in drug prescription and clinical laboratories. Graphical abstract Electrochemical sensor based on bifunctional cabbage flower-like Ho3+/NiO nanostructures modified glassy carbon electrode for simultaneous detecting methotrexate and carbamazepine was fabricated.

A Novel Acetaminophen Soft-Chew Formulation Produced via Hot-Melt Extrusion with In-line Near-Infrared Monitoring as a Process Analytical Technology Tool.

Patients who suffer from dysphagia have difficulty in swallowing hard tablets and capsules; hence, gelatin-based soft-chew dosages are used as an alternative and novel drug delivery approach to overcome this problem. However, the conventional method of producing gelatin-based soft-chew dosages has many potential issues. The objective of this study was to use glycerol and the hot-melt extrusion technique to address potential issues and optimize the formulation. Gelatin, acetaminophen, saccharin, xylitol, and sodium chloride and six different ratios of water and glycerol were used in the seven formulations. Extrusion process temperature of formulations 1-6 and formulation 7 were 90°C and 140°C, respectively. Near-infrared spectra were collected during extrusion to monitor quality consistency. Scanning electron microscopic images of the cross-section of the soft-chew dosages were recorded. Differential scanning calorimetry (DSC) was used to characterize the crystal states of each formulation. Texture profile analysis was used to evaluate the physical properties of the tablets. In vitro drug release characteristics were studied. A 45-day stability study was carried out to evaluate the stability of each formulation. Near-infrared spectra showed that formulations 1-6 were uniform while formulation 7 was not. From the DSC results, formulations 1 and 2 showed crystallinity of acetaminophen. Formulation 5 displayed the desired physical and chemical stability in texture profile analysis and in the in vitro drug release studies. By using glycerol and hot-melt extrusion, the potential issues of conventional methods were successfully addressed.

Hyperspectral Raman Line Mapping as an Effective Tool To Monitor the Coating Thickness of Pharmaceutical Tablets.

Protective chemical coatings are deposited on drugs during the manufacturing process for the purpose of controlling the pharmacokinetics of active pharmaceutical ingredients (APIs). Although manufacturers attempt to coat all the tablets uniformly, the film thickness of an individual drug is statistically different and depends on the measuring position of the anisotropic structure, and analytical methods for measuring coating thickness must be robust to statistical and geometrical aberrations. Herein, we demonstrate that a spatially offset Raman-spectroscopy-based line mapping method offered excellent calibration and prediction of the coating thickness of 270 acetaminophen ( N-acetyl-para-aminophenol, paracetamol) tablets. Raman-scattered light resurfaced back from the coating and APIs, and offset-resolved spectra were projected according to the vertical positions in an imaging sensor. The Raman intensity ratio between the coating substance and the inner APIs is a key parameter in the analysis, and its variation with respect to the spatial offset is proportional to the coating thickness and duration. The results of this study have implications for the rapid spectroscopic thickness measurement of industrial products coated with transparent or translucent materials.

Enhanced amperometric detection of paracetamol by immobilized cobalt ion on functionalized MWCNTs - Chitosan thin film.

In the present study, a nanocomposite of f-MWCNTs-chitosan-Co was prepared by the immobilization of Co(II) on f-MWCNTs-chitosan by a self-assembly method and used for the quantitative determination of paracetamol (PR). The composite was characterized by field emission scanning electron microscopy (FESEM) and energy dispersive x-ray analysis (EDX). The electroactivity of cobalt immobilized on f-MWCNTs-chitosan was assessed during the electro-oxidation of paracetamol. The prepared GCE modified f-MWCNTs/CTS-Co showed strong electrocatalytic activity towards the oxidation of PR. The electrochemical performances were investigated by cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS) and differential pulse voltammetry (DPV). Under favorable experimental conditions, differential pulse voltammetry showed a linear dynamic range between 0.1 and 400 µmol L-1 with a detection limit of 0.01 µmol L-1 for the PR solution. The fabricated sensor exhibited significant selectivity towards PR detection. The fabricated sensor was successfully applied for the determination of PR in commercial tablets and human serum sample.

Adverse reaction and rational use of paracetamol tablets and its drug content detection based on spectral test.

Paracetamol and amantadine hydrochloride tablet is a commonly used drug to relieve the common cold. Its main ingredient is 4-Acetamidophenol. The safety of acetaminophen containing cold drugs has attracted more and more attention in recent years. In order to promote the clinical safety of drugs, the adverse reaction and clinical application of acetaminophen drugs are analyzed in this paper. The adverse reactions induced by acetaminophen mainly include: allergic reaction (46.1%), liver and kidney injury (25%), blood system (15.7%) and digestive system (5.2%). At the same time, we tested the content of acetaminophen by using spectral test. It can be seen that the method can be extended to the quantitative analysis and quality control of the effective components of other compound drugs.

Video approach to chemiluminescence detection using a low-cost complementary metal oxide semiconductor (CMOS)-based camera: determination of paracetamol in pharmaceutical formulations.

A new system for continuous flow chemiluminescence detection, based on the use of a simple and low-priced lens-free digital camera (with complementary metal oxide semiconductor technology) as a detector, is proposed for the quantitative determination of paracetamol in commercial pharmaceutical formulations. Through the camera software, AVI video files of the chemiluminescence emission are captured and then, using friendly ImageJ public domain software (from National Institutes for Health), properly processed in order to extract the analytical information. The calibration graph was found to be linear over the range 0.01-0.10 mg L-1 and over the range 1.0-100.0 mg L-1 of paracetamol, the limit of detection being 10 µg L-1. No significative interferences were found. Paracetamol was determined in three different pharmaceutical formulations: Termalgin®, Efferalgan® and Gelocatil®. The obtained results compared well with those declared on the formulation label and with those obtained through the official analytical method of British Pharmacopoeia. Graphical abstract Abbreviated scheme of the new chemiluminescence detection system proposed in this paper.

Toxic Myocarditis Caused by Acetaminophen in a Multidrug Overdose.

We report the case of an 18-year-old woman with personality disorders who was hospitalized a few hours after suicidal ingestion of acetaminophen, quetiapine, acetylsalicylic acid, and ethanol. Twelve hours after admission, severe liver damage was evident, but the patient was stable and awaiting hepatic transplantation. Electrolytes were successfully controlled. The condition of the liver stabilized. Cardiac biomarkers then deteriorated unexpectedly. Localized ST-segment elevations were noted on electrocardiogram, but angiography ruled out myocardial infarction. A computed tomographic scan ruled out cerebral edema. The patient died of irreversible cardiac arrest 40 hours after admission. Heart failure remained unexplained, and the body underwent forensic autopsy.At autopsy, histologic findings were indicative of acute toxic myocarditis and were concluded to be caused by acetaminophen intoxication. Acetaminophen overdose is common and typically leads to liver failure requiring supportive treatment and emergency liver transplantation. Toxic myocarditis is an extremely rare complication of acetaminophen overdose. It has only been reported 4 times in the literature despite the widespread use and misuse of acetaminophen. Toxic myocarditis remains a possibility in many cases of overdose but can be overlooked in a clinical picture dominated by hepatorenal failure and encephalopathy. Clinicians and forensic pathologists should be aware of this rare potential complication.

Codeine-spiked beer in a date rape case?

A case of suspected drug-facilitated sexual assault, involving codeine and acetaminophen, possibly mixed in beer, was recently addressed at the Norwegian Institute of Public Health. To examine the case, a small study was performed, spiking beer with preparations containing codeine and acetaminophen and observing the concentrations, appearance, and taste of the solutions. The study revealed the majority of the preparations to be quickly soluble in beer, achieving high concentrations, but at the expense of strong taste and drastic visible changes in the beer.

Evaluation of the degradation of acetaminophen by the filamentous fungus Scedosporium dehoogii using carbon-based modified electrodes.

The nonpathogenic filamentous fungus Scedosporium dehoogii was used for the first time to study the electrochemical biodegradation of acetaminophen (APAP). A carbon fiber microelectrode (CFME) modified by nickel tetrasulfonated phthalocyanine (p-NiTSPc) and a carbon paste electrode (CPE) modified with coffee husks (CH) were prepared to follow the kinetics of APAP biodegradation. The electrochemical response of APAP at both electrodes was studied by cyclic voltammetry and square wave voltammetry. p-NiTSPc-CFME was suitable to measure high concentrations of APAP, whereas CH-CPE gave rise to high current densities but was subject to the passivation phenomenon. p-NiTSPc-CFME was then successfully applied as a sensor to describe the kinetics of APAP biodegradation: this was found to be of first order with a kinetics constant of 0.11 day(-1) (at 25 °C) and a half-life of 6.30 days. APAP biodegradation by the fungus did not lead to the formation of p-aminophenol (PAP) and hydroquinone (HQ) that are carcinogenic, mutagenic, and reprotoxic (CMR). Graphical Abstract The kinetics of APAP biodegradation, followed by a poly-nickel tetrasulfonated phtalocyanine modified carbon fiber microelectrode.

Solanum melongena polyphenol oxidase biosensor for the electrochemical analysis of paracetamol.

A new strategy for the construction of a polyphenol oxidase carbon paste biosensor for paracetamol detection is reported. The eggplant (Solanum melongena) was processed to collect the polyphenol oxidase as an enzyme that was incorporated in the carbon paste sensor construction. The constructed sensor displayed high sensitivity and good selection for paracetamol detection and recognition. Optimized conditions included pH 6.0 (highest activity), pH 7.0 (highest stability), pulse amplitude of 50 mV, and 15% of vegetable extract per carbon paste. The sensor displayed a linear range from 20 to 200 µM, with a detection limit of 5 µM. Application of the sensor to paracetamol determination in tablet and oral solutions have shown satisfactory results. The efficiency of the method showed very good repeatability ranging between 1.26 and 1.72% relative standard deviation for interday analysis, while recoveries for paracetamol varied between 97.5 and 99.8% for the voltammetric determination. The strategy for a simple, low cost, and efficient eggplant polyphenol oxidase sensor showcased in this work provides an opportunity for the detection of other phenolic compounds in various matrices.

Electrochemical flow injection analysis of hydrazine in an excess of an active pharmaceutical ingredient: achieving pharmaceutical detection limits electrochemically.

The quantification of genotoxic impurities (GIs) such as hydrazine (HZ) is of critical importance in the pharmaceutical industry in order to uphold drug safety. HZ is a particularly intractable GI and its detection represents a significant technical challenge. Here, we present, for the first time, the use of electrochemical analysis to achieve the required detection limits by the pharmaceutical industry for the detection of HZ in the presence of a large excess of a common active pharmaceutical ingredient (API), acetaminophen (ACM) which itself is redox active, typical of many APIs. A flow injection analysis approach with electrochemical detection (FIA-EC) is utilized, in conjunction with a coplanar boron doped diamond (BDD) microband electrode, insulated in an insulating diamond platform for durability and integrated into a two piece flow cell. In order to separate the electrochemical signature for HZ such that it is not obscured by that of the ACM (present in excess), the BDD electrode is functionalized with Pt nanoparticles (NPs) to significantly shift the half wave potential for HZ oxidation to less positive potentials. Microstereolithography was used to fabricate flow cells with defined hydrodynamics which minimize dispersion of the analyte and optimize detection sensitivity. Importantly, the Pt NPs were shown to be stable under flow, and a limit of detection of 64.5 nM or 0.274 ppm for HZ with respect to the ACM, present in excess, was achieved. This represents the first electrochemical approach which surpasses the required detection limits set by the pharmaceutical industry for HZ detection in the presence of an API and paves the wave for online analysis and application to other GI and API systems.

Self-Assembled Nanocube-Based Plasmene Nanosheets as Soft Surface-Enhanced Raman Scattering Substrates toward Direct Quantitative Drug Identification on Surfaces.

We report on self-assembled nanocube-based plasmene nanosheets as new surface-enhanced Raman scattering (SERS) substrates toward direct identification of a trace amount of drugs sitting on topologically complex real-world surfaces. The uniform nanocube arrays (superlattices) led to low spatial SERS signal variances (∼2%). Unlike conventional SERS substrates which are based on rigid nanostructured metals, our plasmene nanosheets are mechanically soft and optically semitransparent, enabling conformal attachment to real-world solid surfaces such as banknotes for direct SERS identification of drugs. Our plasmene nanosheets were able to detect benzocaine overdose down to a parts-per-billion (ppb) level with an excellent linear relationship (R(2) > 0.99) between characteristic peak intensity and concentration. On banknote surfaces, a detection limit of ∼0.9 × 10(-6) g/cm(2) benzocaine could be achieved. Furthermore, a few other drugs could also be identified, even in their binary mixtures with our plasmene nanosheets. Our experimental results clearly show that our plasmene sheets represent a new class of unique SERS substrates, potentially serving as a versatile platform for real-world forensic drug identification.

Electrolyte system strategies for anionic isotachophoresis with electrospray-ionization mass-spectrometric detection. 1. Regular isotachophoresis and free-acid isotachophoresis.

The subject of this work is the definition of a simple model based on general ITP theory that allows describing and predicting the behavior of ITP systems compatible with ESI-MS detection. The model is exemplified by anionic ITP of weak acids that represent an interesting potential application field of ITP-ESI-MS. Suitable ESI-compatible electrolyte systems of very simple composition are proposed including a special free-acid ITP arrangement. The properties of these systems are discussed using illustrative diagrams of their stacking windows. The use of anionic ITP-ESI-MS in negative-ion ESI mode is reported for the first time and its suitability for sensitive trace analysis is demonstrated. The presented ITP-ESI-MS application example comprises a free-acid ITP system formed of formic and propionic acids and direct injection analysis of ibuprofen and diclofenac in waters with quantitation limits of the order 10(-10) M.

Development and validation of a simple LC method for the determination of phenacetin, coumarin, tolbutamide, chlorzoxazone, testosterone and their metabolites as markers of cytochromes 1A2, 2A6, 2C11, 2E1 and 3A2 in rat microsomal medium.

Cytochrome P450 enzymes are responsible for the oxidative metabolism of most pharmaceutical compounds. A "cocktail" approach which employs simultaneous administration of a mixture of substrates of CYP enzymes was often used to assess the metabolic activity of multiple P450 forms in one experiment. Phenacetin, coumarin, tolbutamide, chlorzoxazone and testosterone are commonly used as probe substrates to evaluate cytochrome P450 function. An analytical strategy to simultaneously extract and analyze the five probe substrates and their major metabolites by HPLC-DAD was developed. The incubation was done with all the substrates in one step. The ten analytes were extracted simultaneously by solid-phase extraction (SPE) from rat liver microsomes. A C18 analytical column and mobile phase composed of acetonitrile and 0.02% aqueous phosphoric acid were used for the chromatographic separation with DAD detection. Limits of quantification varied between 0.02378 and 0.2361 microg/mL which contributed to quantify all these drugs and metabolites with UV detection. The method is applicable for the modeling and description of pharmacological interactions on rat cytochromes P450 or can be used for in vitro evaluation of cytochromes 1A2, 2A6, 2C11, 2E1 and 3A2.

A validated enantioselective HPLC assay of dexibuprofen in dexibuprofen tablet formulations.

A high-performance liquid chromatography-diode array detector (HPLC-DAD) method was developed and validated for the quantitation of dexibuprofen in dexibuprofen tablets using ovomucoid chiral stationary phase (Ultron ES-OVM). The mobile phasewas composed of 0.025 M potassium phosphate dibasic (pH 4.5)-methanol-ethanol (85:10:5 v/v/v). The method was validated for specificity, linearity, range, accuracy, precision and robustness. The method was enantiomerspecific for the determination of dexibuprofen [S-(+)-isomer ibuprofen] in the presence of R-(-)-isomer ibuprofen in bulk drug, pharmaceutical dosage form and under stress degradation. The method was linear over the range 15-35 mg/mL with r² = 0.9995; accuracy and precision were acceptable with %RSD < 2.0%. The method was found to be specific, precise, accurate, robust and stability-indicating, and can be successfully applied for the routine analysis of dexibuprofen in bulk drug and pharmaceutical dosage form.

Examination of factors that delay the elution of acetaminophen from over-the-counter drugs.

The information on the stability of medications is important to secure their quality. There is, however, little information about the stability of medications which assume to be kept by patients and customers. We previously showed that a delay in drug release occurs in some over-the-counter (OTC) drugs following storage in a high temperature, high humidity environment. In this study we prepared model tablet formulations containing an active ingredient and excipients to investigate the cause of this delayed release. The results reveal that delayed release occurs in preparations compounded with acetaminophen (AA) as the active ingredient and erythritol (ET) and crospovidone (CP) as excipients. In addition, ET deliquesces in a high humidity environment, then incorporates other particles during room temperature storage to form an aggregate. SEM observations and micropore distribution measurements conducted on OTC tablets that exhibit delayed release revealed that the number of intraparticle pores decreased after storage under high temperature, high humidity conditions. Thus, the delayed release by these pharmaceutical product formulations may be due to a change in the micropore structure both on the surface and within the particles, thereby decreasing the solvent infiltration pathways leading to the interior of the preparation.

Preparation and evaluation of orally rapidly disintegrating tablets containing taste-masked particles using one-step dry-coated tablets technology.

In this study, in order to address the problems with manufacturing orally rapidly disintegrating tablets (ODT) containing functional (taste masking or controlled release) coated particles, such as the low compactability of coated particles and the rupture of coated membrane during compression, a novel ODT containing taste-masked coated particles (TMP) in the center of the tablets were prepared using one-step dry-coated tablets (OSDrC) technology. As a reference, physical-mixture tablets (PM) were prepared by a conventional tableting method, and the properties of the tablets and the effect of compression on the characteristics of TMP were evaluated. OSDrC was found to have higher tensile strength and far lower friability than PM, but the oral disintegration time of OSDrC is slightly longer than that of PM following high compression pressure. Consequently, OSDrC approaches the target tablet properties of ODT, whereas PM does not. The deformation of TMP in OSDrC due to compression is slight, and the release rate of acetaminophen (AAP) from OSDrC is the same as from TMP. However, TMP on the surface of PM are considerably deformed, and the release rate of AAP from PM is faster than from TMP. These findings suggest that OSDrC technology is a useful approach for preparing ODT containing functional coated particles. Furthermore, we demonstrate that the elastic recovery of tablets can affect differences in the properties of OSDrC, PM and placebo tablets (PC).

[Electrochemical sensor for acetaminophen based on layer-by-layer self assembly technique].

A novel type of carbon nanotube-coated Au nanoparticle and [bmim]BF4 composite modified glassy carbon electrode was fabricated by a layer-by-layer self-assembly technique. The electrochemical performance of acetaminophen (ACOP) on the modified electrode was investigated by cyclic voltammetry. The Nafion/GNPs/RTIL/MWNTs/GC electrode showed an excellent electrocatalytic activity for the oxidation of ACOP and accelerated electron transfer between the electrode and ACOP. For ACOP, the reversible electrochemical process was observed on the Nafion/GNPs/RTIL/MWNTs/GC electrode, while irreversible electrochemical process occurred on the GC electrode. For the Nafion/GNPs/RTIL/MWNTs/GC electrode, the anodic peak potential of ACOP was moved from 0.562 V to 0.413 V, with a potential drop of 149 mV. At the same time, the reduction peak potential was 0.384 V, and the potential difference was only 29 mV. It was shown that the modified electrode possessed higher electrocatalytic activity and more sensitive effect for the detection of ACOP than both MWNTs/GC electrode and GC electrode. The effects of the different experimental conditions on the electrochemical behaviors of ACOP were explored. Under the optimum conditions of preparation and experimental, the linear calibration curves of ACOP were obtained in a wide range of 2 x 10(-1) to 4.0 x 10(-4) mol x L(-1) with a correlation coefficient 0.999 2 and a detection limit of 2.6 x 10(-8) mol x L(-1) (the ratio of signal to noise, 3:1). The recovery rate was 97.9%-100.8%. This method can be used to determine ACOP in paracetamol tablets with satisfactory results.