[18F]Atorvastatin Pharmacokinetics and Biodistribution in Healthy Female and Male Rats.

Statins are 3-hydroxy-3-methylglutaryl-coenzyme A reductase inhibitors that are widely used to prevent cardiovascular diseases. However, a series of pleiotropic mechanisms have been associated with statins, particularly with atorvastatin. Therefore, the assessment of [18F]atorvastatin kinetics with positron emission tomography (PET) may elucidate the mechanism of action of statins and the impact of sexual dimorphism, which is one of the most debated interindividual variations influencing the therapeutic efficacy. [18F]Atorvastatin was synthesized via a previously optimized 18F-deoxyfluorination strategy, used for preclinical PET studies in female and male Wistar rats (n = 7 for both groups), and for subsequent ex vivo biodistribution assessment. PET data were fitted to several pharmacokinetic models, which allowed for estimating relevant kinetic parameters. Both PET imaging and biodistribution studies showed negligible uptake of [18F]atorvastatin in all tissues compared with the primary target organ (liver), excretory pathways (kidneys and small intestine), and stomach. Uptake of [18F]atorvastatin was 38 ± 3% higher in the female liver than in the male liver. The irreversible 2-tissue compartment model showed the best fit to describe [18F]atorvastatin kinetics in the liver. A strong correlation (R2 > 0.93) between quantitative Ki (the radiotracer's unidirectional net rate of influx between compartments) and semi-quantitative liver's SUV (standard uptake value), measured between 40 to 90 min, showed potential to use the latter parameter, which circumvents the need for blood sampling as a surrogate of Ki for monitoring [18F]atorvastatin uptake. Preclinical assays showed faster uptake and clearance for female rats compared to males, seemingly related to a higher efficiency for exchanges between the arterial input and the hepatic tissue. Due to the slow [18F]atorvastatin kinetics, equilibrium between the liver and plasma concentration was not reached during the time frame studied, making it difficult to obtain sufficient and accurate kinetic information to quantitatively characterize the radiotracer pharmacokinetics over time. Nevertheless, the reported results suggest that the SUV can potentially be used as a simplified measure, provided all scans are performed at the same time point. Preclinical PET-studies with [18F]atorvastatin showed faster uptake and clearance in female compared to male rats, apparently related to higher efficiency for exchange between arterial blood and hepatic tissue.

First-derivative synchronous spectrofluorimetric method for estimation of losartan potassium and atorvastatin in their pure forms and in tablets.

Losartan potassium (LOS) and atorvastatin (ATR) are used in combination for long-term treatment of stroke and for treatment of hypertension with high-level cholesterol. Both drugs were simultaneously determined and validated using a novel, easy, fast, and economical first-derivative synchronous fluorescence spectroscopic method. Methanol was used as the solvent for both drugs at a Δλ 80 nm and with a scanning rate of 600 nm/min. Peaks were determined as at 288.1 nm and 263.6 nm for LOS and ATR, respectively. The proposed method was validated according to International Conference on Harmonization guidelines and, subsequently, the developed method was applicable to the analysis of the two compounds in their different formulations without interference from each other. Amplitude-concentration plots were rectilinear over the concentration ranges 1.0-10.0 µg/ml and 0.5-5.0 µg/ml for LOS and ATR, respectively. Detection limits were found to be 0.096 µg/ml and 0.030 µg/ml and quantitation limits were 0.291 µg/ml and 0.093 µg/ml for LOS and ATR, respectively. The proposed method was successfully applied to the analysis of both compounds in synthetic mixtures and in laboratory-prepared tablets. These results were in accordance with the results acquired using the comparison method, high-performance liquid chromatography.

A novel HPLC method developed and validated for the detection and quantification of atorvastatin, fluvastatin, pitavastatin and pravastatin during transdermal delivery studies.

An HPLC method was developed and validated to quantify and identify several statins (atorvastatin, fluvastatin, pitavastatin and pravastatin) that were used during transdermal drug delivery. The method proved to be most effective with a Restek Ultra C18, 250 x 4.6 mm, 5 µm column, a flow rate of 1.0 ml/min, UV detection at 240 nm and injection volume of 10 µl. The mobile phase used was acetonitrile/Milli-Q® water with 0.1% orthophosphoric acid starting with 30% acetonitrile, which increased linearly to 70% (after 4 min) for up to 10 min and then re-equilibrated to start conditions. This HPLC method indicated linearity (correlation coefficient (R²) of 1) within the concentration range of 0.05-200.00 µg/ml and had an average recovery of 98-103%. Limit of detection (LOD) and limit of quantification (LOQ) showed that statins could still be identified at concentrations of 0.004-0.006 µg/ml with the exception of atorvastatin (quantifiable at 0.013-0.035 µg/ml). Specificity performed during method validation, confirmed that the method was suitable for accurate detection and quantification of the statins when included in the transdermal formulations with other excipients.

Access and concentrations of atorvastatin in the prostate in men with prostate cancer.

BACKGROUND: Statins have anticancer effects on prostate cancer both in vitro and in vivo. It is unclear whether this is due to systemic cholesterol-lowering or direct local growth inhibition in the prostate. It is also unclear whether statins can access the prostate; lipophilic statins could, in theory, pass lipid-enriched cell membranes by passive diffusion. However, statin concentrations in the human prostate have not been measured before. METHODS: The study population was based on a randomized clinical trial where 158 men with prostate cancer were randomized to use 80 mg atorvastatin (ATV) or placebo daily for a median of 27 days before radical prostatectomy. ATV and atorvastatin lactone (ATV-Lactone) concentrations in the plasma and in the prostate were measured with mass spectrometry in men randomized to the ATV arm. Linear trends between intraprostatic concentration and plasma concentration, body mass index, age, and duration of intervention were examined. The relative tissue concentrations of ATV and ATV-Lactone were calculated in prostatic tissue and plasma to evaluate drug homeostasis. Subgroup analyses were stratified by tumor and population characteristics. RESULTS: The analysis involved a total of 55 men. When limited to men whose tissue concentrations of ATV was measurable (n = 28, 50%), median ATV concentration was 212% higher in the tissue (median concentration 17.6 ng/g) compared to the plasma (median concentration 3.6 ng/mL). Also, ATV-L concentration was 590% higher in the tissue as compared to the plasma concentration. No statistically significant linear trends between the plasma and tissue concentrations were observed. When comparing the relative concentration of atorvastatin lactone over ATV, the concentrations were in balance in the plasma, In the prostate, however, the relative concentration of atorvastatin lactone was 57% lower compared to ATV (P = .009 for the difference between prostate tissue and plasma). No effect modification by tumor or population characteristics was observed. CONCLUSIONS: Measurable ATV concentrations in the prostate support ATV's ability to access the prostate from the circulation. ATV may accumulate in the prostate as intraprostatic concentrations are elevated compared to the plasma concentration.

Development and full validation of an HPLC methodology to quantify atorvastatin and curcumin after their intranasal co-delivery to mice.

There is increasing interest in atorvastatin and curcumin owing to their potential anticancer activity. A new, accurate and sensitive HPLC method was developed, for the first time, to simultaneously quantify atorvastatin and curcumin in mouse plasma and brain, liver, lung and spleen tissues following protein precipitation sample preparation. The chromatographic separation was achieved in 13 min on a C18 column, at 35°C, using a mobile phase composed of acetonitrile-methanol-2% (v/v) acetic acid (37.5:2.5:60, v/v/v) at a flow rate of 1.0 mL/min. The detection of analytes and internal standard was carried out at 247, 425 and 250 nm, respectively. According to international guidelines, the method was shown to be selective, with lower limits of quantification ranging from 10 to 500 ng/mL for curcumin, and from 100 to 600 ng/mL for atorvastatin, linear over a wide concentration range (r2 ≥ 0.9971) and with acceptable accuracy (bias ± 12.29%) and precision (coefficient of variation ≤13.15%). The analytes were reproducibly recovered at a percentage >81.10% and demonstrated to be stable under various experimental conditions in all biological matrices. This method can be easily applied to in vivo biodistribution studies related to the intranasal administration of atorvastatin and curcumin, separately or simultaneously.

[Application of the method of liquid chromato-mass spectrometry for determination of bisoprolol and atorvastatin.]

A technique has been developed for the quantitative determination of bisoprolol and atorvastatin in mixed saliva on a LCMS-8040 triple quadrupole liquid chromatographic mass spectrometer with ionization, separation and detection of samples, which allows determining the concentration in mixed saliva of bisoprolol with an accuracy of 93.7 to 98, 5% and atorvastatin from 95.6 to 98.3%.

Combined Liquid Chromatography-Infrared Ion Spectroscopy for Identification of Regioisomeric Drug Metabolites.

High-performance liquid chromatography was used in combination with infrared ion spectroscopy for the identification of positional isomers of hydroxy-atorvastatins, the primary metabolites of the drug atorvastatin. The results demonstrate the direct applicability of infrared ion spectroscopy in the field of drug metabolism and, more generally, its promising role in state-of-the-art analytical laboratories for the identification of small molecules buried in complex mixtures. In combination with chromatographic separation, infrared spectroscopy of mass-selected ions provides a promising new route for the identification of the molecular structures of unknown m/z peaks in a mass spectrum. We demonstrate that currently existing experimental protocols allow the measurement of an IR spectrum from less than 10 ng of sample obtained in a collected HPLC fraction.

Development and Validation of highly Sensitive Stability Indicating Spectrofluorimetric Method for Determination of Amlodipine in Pharmaceutical Preparations and Human Plasma.

A highly sensitive and simple spectrofluorimetric method was developed for the determination of Amlodipine besylate (AML) in its pharmaceutical formulations and spiked human plasma. The proposed method is based on the investigation of the fluorescence spectral behaviour of AML in Tween-80 micellar system. In aqueous solution, the fluorescence intensity of AML was greatly enhanced (160 %) in the presence of Tween-80. The fluorescence intensity was measured at 427 nm after excitation at 385 nm. The fluorescence-concentration plot was rectilinear over the concentration range 0.1-4.0 µg/ml, with lower detection limit of 0.03 µg/ml. The suggested method was successfully applied for the analysis of AML in its commercial tablets alone or in combination with either Atorvastatin or Valsartan. The application of the proposed method was extended to the assay of AML in spiked human plasma and stability studies of AML after exposure to different forced degradation conditions, such as acidic, alkaline, photo- and oxidative conditions, according to ICH guidelines. The results were statistically compared to those obtained by comparison methods and were found to be in good agreement.

Single dose pharmacokinetics of atorvastatin oral formulations using a simple HPLC-UV method.

The study was aimed to assess pharmacokinetics of atorvastatin (40 mg) in healthy fasted human subjects by a simple and inexpensive high performance liquid chromatography. Experimental design of the study was a randomized, two way, two periods, crossover study (single dose in fasted conditions). Eighteen (18) healthy male volunteers were enrolled according to FDA guidelines. The plasma samples were assayed using an isocratic High Performance Liquid Chromatography (HPLC) system of Agilent technologies USA consisted of an isocratic pump with column of Thermo Electron Corporation USA (ODS hypersil C(18) 4.6 mm x 250 mm), a UV-visible detector set at λ(max) 237 nm. Maximum plasma concentrations (C(max)) of atorvastatin (Mean ± SEM) for the reference product (A) found to be 13.739±0.210ng/ml & 13.374±0.145ng/ml for test product (B). T(max) values (Mean±SEM) of atorvastatin were 1.222 ±0.060 hours and 1.167±0.057 hours for reference and test products, respectively. The values of AUC(0-oo) (Mean ± SEM) for the reference (A) and test product (B) were 73.955 ± 1.715ng.h/ml and 77.773 ± 1.858ng. h/ml, respectively. Other pharmacokinetic parameters of both products were also determined. A statistical non-significant difference between pharmacokinetic parameters has been found and both brands of atorvastatin showed the same rate and extent of absorption in healthy fasted human volunteers after single dose. A simple and cost effective HPLC method was developed and applied.

Isolation of oxidative degradation products of atorvastatin with supercritical fluid chromatography.

The isolation of four oxidative degradation products of atorvastatin using preparative high-performance liquid chromatography applying at least two chromatographic steps is known from the literature. In this paper it is shown that the same four impurities could be isolated from similarly prepared mixtures in only one step using supercritical fluid chromatography. The methods for separation were developed and optimized. The preparation of the mixtures was altered in such a way as to enhance the concentration of desired impurities. Appropriate solvents were applied for collection of separated impurities in order to prevent degradation. The structures of the isolated impurities were confirmed and their purity determined. The preparative supercritical fluid chromatography has proven to be superior to preparative HPLC regarding achieved purity of standards applying fewer chromatographic as well as isolation steps.

Application of new spectrofluorometric techniques for determination of atorvastatin and ezetimibe in combined tablet dosage form.

Two accurate, reliable, and highly sensitive spectrofluorometric methods were developed for simultaneous determination of the binary mixture of Atorvastatin and Ezetimibe without prior separation steps. The first method is based on double scan synchronous fluorescence spectrometry. Each of Atorvastatin and Ezetimibe can be determined independent of the other when scanned at Δλ=100 nm and 40 nm, respectively. The relative fluorescence intensity-concentration plots at two wavelengths, 272 (Δλ=100 nm) and 266 nm (Δλ=40 nm) were rectilinear over the range of 0.4-8 µg/mL (for Atorvastatin) and 0.6-8 µg/mL (for Ezetimibe), respectively. The second method is based on the technique of simultaneous equations (Vierodt's method), in which two equations are solved simultaneously after using a single excitation wavelength of 273 nm and λEm1=380 nm of Atorvastatin and λEm2=301 nm of Ezetimibe. Under the optimum conditions, linear relationships were found between the relative fluorescence intensity and the concentrations of the investigated drugs in the range of 0.4-8 µg/mL (for Atorvastatin) 0.6-8 µg/mL (for Ezetimibe). The different experimental parameters affecting the fluorescence intensities of the two drugs were carefully studied and optimized. The proposed methods were successfully applied for the determination of the investigated drugs in pure form, dosage form and in synthetic mixtures with good recovery and the results obtained were favorably compared to those obtained with a reference method.

Formulation of solid self-nanoemulsifying drug delivery systems using N-methyl pyrrolidone as cosolvent.

Atorvastatin calcium (ATRC) is a poor water soluble drug used for treatment of hypercholesterolemia. This research is aimed to improve solubility and dissolution rate of ATRC by formulating into solid self-nanoemulsifying drug delivery system (S-SNEDDS) using N-methyl pyrrolidone (NMP) as cosolvent. Solubility of ATRC was determined in various vehicles. Ternary phase diagrams were constructed to identify stable nanoemulsion region. SNEDDS formulations were evaluated for robustness to dilution, thermodynamic stability study, % transmittance, self-emulsification time, globule size and transmission electron microscopy. The optimized liquid SNEDDS showed robust to all dilutions exhibiting no signs of phase separation or precipitation for 24 h. Liquid SNEDDS was transformed into S-SNEDDS using different adsorbents. Differential scanning calorimetry and scanning electron microscopy studies unravel the transformation of native crystalline state to amorphous state/solubilized state. In vitro dissolution study of S-SNEDDS was found to be significantly higher in comparison to that from plain drug, irrespective of pH (p < 0.001). Furthermore, ex vivo permeation studies showed a 4.45-fold improvement in apparent permeability coefficient (Papp) from S-SNEDDS compared to plain drug. In conclusion, S-SNEDDS prepared using NMP as cosolvent provides an effective approach for improved oral delivery of ATRC.

Methanolic extract of S. securidaca flowers, leaves, and seeds' antihyperlipidemic effects on high fat diet-induced hyperlipidemia in Wistar rats.

Significant risk factors for atherosclerosis include hyperlipidemia and oxidative stress, which together rank as three of the most significant risk factors for cardiovascular diseases. Securigera securidaca lowers cholesterol levels in diabetic rats' blood. This investigation's objective was to determine how methanolic extracts affected the flowers, leaves, and seeds of plants in rats that were fed a high-fat diet (HFD). Five groups of animals were created (n = 5). A total of 35 days, divided into two intervals, were used for the study. Rats received HFD during the first 15-day interval, while during the second 20-day interval, they also received extracts or the Atorvastatin reference drug. The extract of seeds has a high phenol content as well as DPPH radical antioxidant activity. Extracts were given at a dose of 200 mg/kg; p.o. Methanolic treatment of S. securidaca flowers, leaves, and seeds in HFD-induced hyperlipidemic rats resulted in significant reductions in total cholesterol, triglycerides, LDLC, and VLDL-C levels. HDL-C levels increased significantly because of the leaves. While in hyperlipidemic rats, seeds significantly reduced the activities of the enzymes ALT and ALP. The findings showed that, to a certain extent, seeds, flowers, and leaves may have benefits in reducing hyperlipidemia brought on by HFD in terms of lipid profiles and liver function enzymes. The findings of this study indicate a promising application prospect, but more research is needed to determine the exact mechanism of these novel compounds as antihyperlipidemic agents and to clarify their potential combination effect with synthetic drugs such as Atorvastatin. Combinations can reduce the dose of chemical medications required, which lowers the risk of side effects.

Simultaneous estimation of amlodipine and atorvastatin by micelle-augmented first derivative synchronous spectrofluorimetry and multivariate analysis.

Five Selective, rapid and sensitive spectrofluorimetric methods were performed in this study for the simultaneous estimation of amlodipine besylate (AML) and atorvastatin (ATR) in their binary mixtures and combination polypills that are used for management of cardiovascular conditions. The first method depends on micelle-enhanced first derivative synchronous fluorimetric analysis (method I) and the other four methods are multivariate analysis techniques based on the use of factor-based calibration prediction methods comprising partial least squares (PLS), Principal Component Regression (PCR), genetic algorithm PLS (GA-PLS) and genetic algorithm PCR (GA-PCR). The synchronous fluorescence spectra of the solutions were measured at a constant wavelength difference; Δλ = 100 nm. The magnitudes of the peaks of the first derivative spectra (1D) were measured at 292 nm and 387 nm for ATR, and AML correspondingly. The multivariate models were constructed utilizing fifteen mixtures as a calibration set and ten mixtures as a validation set. The linearity of all the methods was in the concentration ranges of (0.1-4.0 µg mL-1, 0.4-10.0 µg mL-1) for AML and ATR, correspondingly. Statistical analysis revealed no significant difference between the proposed methods and the reference method. The validity of the proposed methods allows their suitability for quality control work. All the analysis settings were optimized and all the suggested procedures were applied productively for the determination of both drugs in synthetic mixtures, validation set, and combination polypills.

Sustainable environment-friendly quantitative determination of three anti-hyperlipidemic statin drugs and ezetimibe in binary mixtures by first derivative Fourier transform infrared (FTIR) spectroscopy.

FTIR spectrometry is considered a sustainable green analytical chemistry procedure. Its use in quantitative analysis of pharmaceutical compounds in their raw resources and in their dosage forms is growing currently. The current research offers an environment-friendly, speedy, cost-effective, reliable and easy method for the simultaneous estimation of anti-hyperlipidemic drugs. No sample preparation was required except for grinding and mixing with KBr for making pellets used for acquisition of the FT-IR spectra. First-derivative FTIR spectroscopy is used to assess quantitatively atorvastatin (ATR), rosuvastatin (RSV) and simvastatin (SMV) in their binary mixtures with ezetimibe (EZT). For the first mixture, EZT and ATR were determined at 1733.18 cm-1 and 1647.74 cm-1, respectively. In the second mixture, the zero-crossing wave numbers selected for the determination of EZT and RSV were 1733.18 cm-1 and 955.69 cm-1, correspondingly. Whereas, the third mixture was quantified at the wavenumbers of 1520.93 and 3569.68 cm-1 for EZT and SMV, respectively. Validation of the procedure has been performed complying with recommendations of the International Conference of Harmonization (ICH) presenting linearity, accuracy, precision, robustness and selectivity. The linear range for all drugs was 2-30 mg/g. It was found that the LOD was 0.607, 0.311, 0.491 and 0.395 mg/g and the LOQ was found to be 1.839, 0.942, 1.490 and 1.190 mg/g for EZT, ATR, RSV, and SMV, correspondingly. The proposed technique was found to be accurate and precise in terms of percentage error and percentage relative standard deviation among intraday and interday measurements. It was also found selective through comparison of the results of standard drugs with results of binary mixtures and of pharmaceutical tablets. It was found robust through making slight variations in the working conditions and the results obtained remained statistically equivalent. The technique was applied effectively for the estimation of the binary mixtures under study in their tablets. Comparing the found outcomes to those of reference derivative UV spectrophotometric methods gave no significant difference between them. Analytical eco-scale and the scale of Green Analytical Procedure Index (GAPI) are the two scales utilized for evaluation of the greenness of the technique and it was found to be excellent green.

Sensitive fluorescence detection of atorvastatin by doped carbon dots synthesized in deep eutectic media.

Fluorescence properties of nanoparticles can be influenced by solvent. In this work, carbon dots (CDs) were synthesized in deep eutectic solvent by microwave assisted method. Quantum yield (QY) and size of the synthesized CDs were 41.3% and 2 nm, respectively. N/Cl -doped CDs had excellent sensitivity and selectivity for atorvastatin and detection limit was 0.8 nM. Simple and low-cost synthesis method and excellent sensitivity are advantages of this detection method for atorvastatin. The as-synthesized N/Cl-doped CDs were successfully used to determine atorvastatin in blood serum.

Determination of amlodipine and atorvastatin mixture by different spectrophotometric methods with or without regression equations.

Four new, simple, and reproducible spectrophotometric methods were developed and validated for the simultaneous determination of Amlodipine (AML) and Atorvastatin (AT) in bulk powder and pharmaceutical dosage form. The four methods include two progressive and two successive resolution techniques. The two progressive methods are Absorbance Subtraction (AS) and Amplitude Modulation (AM), while the two successive methods are Constant Value (CV) and Concentration Value. In the Concentration Value method, the concentration of the drugs is determined from the graphical representation without the use of regression equations. Linearity range for the two progressive methods was from 5 µg/mL-35 µg/mL while for the two successive methods was from 5 µg/mL-55 µg/mL. The four methods were validated according to the ICH guidelines and were found to be accurate, precise, and selective. The methods were also applied for determination of the mixture in the marketed pharmaceutical dosage form. Results obtained were compared with reported methods. Also, One-way ANOVA statistical test was done between all the proposed spectrophotometric methods where no significant differences were found.

Selective drug metabolite trace analysis by very high-volume injections and heartcut two-dimensional (2D)-ultrahigh performance liquid chromatography (UHPLC).

The application of two-dimensional liquid chromatography (2D-LC) is gradually growing also in the area of metabolite profiling and identification. The current contribution describes a heartcut 2D-UHPLC configuration that is applied in support of drug metabolism studies in development. The setup applies four LC columns: two analytical UHPLC columns to perform the first and second dimension separations, which are both preceded by a short HPLC column operated as trapping column. The first HPLC column allows a significant online preconcentration by large volume injection. The second short HPLC column is placed between the first and second dimension columns and enables the selection of orthogonal conditions in the second dimension independent of the first dimension making the heartcutting 2D approach more generic. The value of the setup was demonstrated with selective ultraviolet chromatograms obtained for the two major hydroxylated metabolites of atorvastatin separating them from a very high biological background, originating from an injection of 4 mL feces extract, by heartcut 2D-LC. In a second application, the main metabolite of imipramine was baseline separated from some minor metabolites that were co-eluting in the first dimension, allowing accurate and sensitive quantification. A quantification limit in the attogram/mL range was achieved thanks to the injection of 200 mL diluted urine, corresponding to 100 mL urine on column.

Rapid quantitation of atorvastatin in process pharmaceutical powder sample using Raman spectroscopy and evaluation of parameters related to accuracy of analysis.

The purpose of this study was to determine the atorvastatin (ATV) content in process pharmaceutical powder sample using Raman spectroscopy. To establish the analysis method, the influence of the type of Raman measurements (back-scattering or transmission mode), preparation of calibration sample (simple admixing or granulation), sample pre-treatment (pelletization), and spectral pretreatment on the Raman spectra was investigated. The characteristic peak of the active compound was more distinctively detected in transmission Raman mode with a laser spot size of 4mm than in the back-scattering method. Preparation of calibration samples by wet granulation, identical to the actual manufacturing process, provided unchanged spectral patterns for the in process sample, with no changes and/or shifts in the spectrum. Pelletization before Raman analysis remarkably improved spectral reproducibility by decreasing the difference in density between the samples. Probabilistic quotient normalization led to accurate and consistent quantification of the ATV content in the calibration samples (standard error of cross validation: 1.21%). Moreover, the drug content in the granules obtained from five commercial batches were reliably quantified, with no statistical difference (p=0.09) with that obtained by HPLC assay. From these findings, we suggest that transmission Raman analysis may be a fast and non-invasive method for the quantification of ATV in actual manufacturing processes.

Simultaneous Determination of Acetylsalicylic Acid, Hydrochlorothiazide, Enalapril, and Atorvastatin in a Polypill-Based Quaternary Mixture by TLC.

A new chromatographic-densitometric method has been developed for the qualitative and quantitative determination of the active ingredients in a simulated mixture corresponding to the PolyIran polypill, composed of acetylsalicylic acid, hydrochlorothiazide (HCT), enalapril (ENA), and atorvastatin (ATR), whose efficacy in the treatment and prevention of cardiovascular disease has been documented in clinical trials. Chromatographic separation was performed using TLC silica gel 60 plates with fluorescent indicator F254 as the stationary phase and a mixture of n-hexane-ethyl acetate-methanol-water-acetic acid (8.4 + 8 + 3 + 0.4 + 0.2, v/v/v/v/v) as the mobile phase. Densitometric measurements were carried out at λ = 210 nm when determining ENA and at λ = 265 nm in the case of the other drugs. Peaks of examined substances were well separated in the recorded chromatograms, enabling the evaluation of the results in terms of both qualitative and quantitative analysis. The method was specific for the analyzed components and was characterized by high sensitivity. The LOD was between 0.043 and 0.331 µg/spot, and LOQ was between 0.100 and 0.942 µg/spot. Recovery was in the range of 97.02-101.34%. The linearity range was broad and ranged from 0.600 to 6.000 µg/spot for acetylsalicylic acid, from 0.058 to 1.102 µg/spot for HCT, from 0.505 to 6.560 µg/spot for ENA, and from 0.100 to 1.000 µg/spot for ATR. The method was characterized by good precision, with RSD values that ranged from 0.10 to 2.26%.