Enzymatic transesterification of coconut oil by using immobilized lipase on biochar: An experimental and molecular docking study.

Guava seed biochar appears as a new alternative of the effective support to the immobilization of Burkholderia cepacia lipase (BCL) by physical adsorption. The objective of this work was to evaluate the potential of this immobilized biocatalyst in the transesterification reaction of crude coconut oil and ethanol and to understand the mechanism of the reaction through the study of molecular docking. The best loading of BCL was determined to be 0.15 genzyme /gsupport having a hydrolytic activity of 260 U/g and 54% immobilization yield. The products of transesterification reaction produced a maximum yield at 40 °C under different reaction conditions. The monoacylglycerols (MAGs) conversion of 59% was using substrate molar ratio oil:ethanol of 1:7 with the reaction time of 24 H. In addition, the highest ethyl esters yield (48%) had the molar ratio of 1:7 with the reaction time of 96 H and maximum conversion of diacylglycerols (DAGs) was 30% with the molar ratio of 1:6 with the reaction time of 24 H. Molecular Docking was applied to clarify the mechanisms of transesterification reaction at the molecular level. MAGs and DAGs are compounds with excellent emulsifying properties used in industrial production of several bioproducts such as cosmetic, pharmaceuticals, foods, and lubricants.

Design for preparation of more active cross-linked enzyme aggregates of Burkholderia cepacia lipase using palm fiber residue.

A new design of cross-linked enzyme aggregates (CLEAs) of Burkholderia cepacia lipase (BCL) based mainly on the use of lignocellulosic residue of palm fiber as an additive was proposed. Different parameters for the preparation of active CLEAs in the hydrolysis of olive oil, such as precipitation agents, crosslinking agent concentration, additives, and coating agents were investigated. The highest activity yield (121.1 ± 0.1%) and volumetric activity (1578.1 ± 2.5 U/mL) were achieved for CLEAs prepared using the combination of a coating step with Triton® X-100 and polyethyleneimine plus the use of palm fiber as an additive. The variations of the secondary structures of BCL-CLEAs were analyzed by second-derivative infrared spectra, mainly indicating a reduction of the α-helix structure, which was responsible for the lipase activation in the supramolecular structure of the CLEAs. Thus, these results provided evidence of an innovative design of BCL-CLEAs as a sustainable and biocompatible opportunity for biotechnology applications.

Computational and experimental analysis on the preferential selectivity of lipases for triglycerides in Licuri oil.

In the present study, we demonstrated the use of molecular docking as an efficient in silico screening tool for lipase-triglyceride interactions. Computational simulations using the crystal structures from Burkholderia cepacia lipase (BCL), Thermomyces lanuginosus lipase (TLL), and pancreatic porcine lipase (PPL) were performed to elucidate the catalytic behavior with the majority triglycerides present in Licuri oil, as follows: caprilyl-dilauryl-glycerol (CyLaLa), capryl-dilauryl-glycerol (CaLaLa), capryl-lauryl-myristoyl-glycerol (CaLaM), and dilauryl-myristoyl-glycerol (LaLaM). The computational simulation results showed that BCL has the potential to preferentially catalyze the major triglycerides present in Licuri oil, demonstrating that CyLaLa, (≈25.75% oil composition) interacts directly with two of the three amino acid residues in its catalytic triad (Ser87 and His286) with the lowest energy (-5.9 kcal/mol), while other triglycerides (CaLaLa, CaLaM, and LaLaM) interact with only one amino acid (His286). In one hard, TLL showed a preference for catalyzing the triglyceride CaLaLa also interacting with His286 residue, but, achieving higher binding energies (-5.3 kcal/mol) than found in BCL (-5.7 kcal/mol). On the other hand, PPL prefers to catalyze only with LaLaM triglyceride by His264 residue interaction. When comparing the computational simulations with the experimental results, it was possible to understand how BCL and TLL display more stable binding with the majority triglycerides present in the Licuri oil, achieving conversions of 50.86 and 49.01%, respectively. These results indicate the production of fatty acid concentrates from Licuri oil with high lauric acid content. Meanwhile, this study also demonstrates the application of molecular docking as an important tool for lipase screening to reach a more sustainable production of fatty acid concentrates from vegetable oils.

Synthesis of propyl benzoate by solvent-free immobilized lipase-catalyzed transesterification: Optimization and kinetic modeling.

The present study aimed to analyze reaction kinetics and mechanism for the synthesis of propyl benzoate in solvent-free conditions. Lipase was immobilized on Hydroxypropyl methylcellulose (HPMC) and polyvinyl alcohol (PVA) polymer blend by entrapment method. Among different lipases immobilized on a support, Candida cylindracea (CCL) showed excellent activity. Systematic studies were done to optimize the reaction conditions. The activation energy was found to be 16.2 kcal/mol for immobilized CCL. Kinetic parameters were calculated, which depicted that propyl benzoate synthesized using immobilized CCL followed the ternary complex model in which propanol inhibits lipase activity at higher concentrations. Recyclability of the catalyst was checked up to four catalytic cycles and 40% retention of activity was observed up to the fourth cycle. Finally, the applicability of developed protocol to synthesize various alkyl benzoates was explored.

Continuous production of monoacylglycerol via glycerolysis of babassu oil by immobilized Burkholderia cepacia lipase in a packed bed reactor.

This study investigated the glycerolysis of babassu oil by Burkholderia cepacia lipase immobilized on SiO2-PVA particles in a continuous packed bed reactor. Experiments were conducted in a solvent-free system at 273.15 K either in an inert atmosphere or in the presence of cocoa butter to prevent lipid oxidation. The reactor (15 × 55 mm) was run at a fixed space time of 9.8 h using different molar ratios of babassu oil to glycerol (1:3, 1:6, 1:9, 1:12, and 1:15) to assess the effects of reactant molar ratio on monoacylglycerol productivity and selectivity. Nitrogen atmosphere and cocoa butter were equally effective in inhibiting lipid oxidation, indicating that addition of cocoa butter to glycerolysis reactions may be an interesting cost-reduction strategy. An oil/glycerol molar ratio of 1:9 resulted in the highest productivity (52.3 ± 2.9 mg g-1 h-1) and selectivity (31.5 ± 1.8%). Residence time distribution data were fitted to an axial dispersion model for closed-vessel boundary conditions, giving a mass transfer coefficient (kc) of 3.4229 × 10-6 m s-1. A kinetic model based on elementary steps of the studied reaction was written in Scilab and compared with experimental data, providing standard deviations in the range of 5.5-7.5%.

Production of starch-polyester bio-support for lipases immobilization: synergistic action of itaconic acid and nanoclay.

The objective of the present work was to develop biodegradable polymeric films (starch-PBAT) as support for the immobilization of lipases using sodium montmorillonite (MMT) as a reinforcing agent (2% w/w) and itaconic acid (IA - 0.5-1.5% w/w) as a compatibilizing agent. The films were produced through a two steps blow-extrusion. The addition of MMT increased the tensile strength and Tg of the films, while the presence of IA made the films more flexible, reducing their Tg. Lipases from Burkholderia cepacia LTEB11 were immobilized in the films by the adsorption method. The ester yield (% of ethyl oleate synthesis) has shown best results (96%, 6 h) for immobilized enzyme in the MMT film and six cycles of reuse were carried out until a reduction of 50% in the catalytic activity of the enzyme.

Microchamber arrays made of biodegradable polymers for enzymatic release of small hydrophilic cargos.

The encapsulation of small hydrophilic molecules and response to specific biological triggers in a controlled manner have become two of the significant challenges in biomedical research, in particular in the field of localized drug delivery and biosensing. This work reports the fabrication of free-standing microchamber array films made of biodegradable polymers for the encapsulation and enzymatically triggered release of small hydrophilic molecules. Polycaprolactone (PCL) microchamber arrays were demonstrated to fully biodegrade within 5 hours of exposure to lipase from Pseudomonas cepacia (lipase PS) at a concentration of 0.5 mg ml-1, with lower concentrations producing correspondingly longer degradation times. The gradual process of deterioration was real-time monitored utilising laser Fraunhofer diffraction patterns. Additionally, a small hydrophilic molecule, 5(6)-carboxyfluorescein (CF), was loaded into the PCL microchamber arrays in a dry state; however, the substantial permeability of the PCL film led to leakage of the dye molecules. Consequently, polylactic acid (PLA) was blended with PCL to reduce its permeability, enabling blended PCL-PLA (1 : 2 ratio correspondingly) microchamber arrays to trap the small hydrophilic molecule CF. PCL-PLA (1 : 2) microchamber arrays hold potential for controlled release under the catalysis of lipase within 26 hours. Additionally, it is calculated that approximately 11 pg of CF dye crystals was loaded into individual microchambers of 10 µm size, indicating that the microchamber array films could yield a highly efficient encapsulation.

Continuous flow reactor based with an immobilized biocatalyst for the continuous enzymatic transesterification of crude coconut oil.

Here, we have assessed the use of one packed bed or two packed bed reactors in series in which Burkholderia cepacia lipase (BCL) was immobilized on protic ionic liquid (PIL)-modified silica and used as a biocatalyst for the transesterification of crude coconut oil. Reaction parameters including volumetric flow, temperature, and molar ratio were evaluated. The conversion of transesterification reaction products (ethyl esters) was determined using gas chromatography and the quantities of intermediate products (diglyceride and monoglyceride [MG]) were assessed using high-performance liquid chromatography. Packed bed reactors in series produced ethyl esters with the greatest efficiency, achieving 65.27% conversion after 96 H at a volumetric flow rate of 0.50 mL Min-1 at 40 °C and a 1:9 molar ratio of oil to ethanol. Further, within the first 24 H of the reaction, increased MG (54.5%) production was observed. Molecular docking analyses were performed to evaluate the catalytic step of coconut oil transesterification in the presence of BCL. Molecular docking analysis showed that triglycerides have a higher affinity energy (-5.7 kcal mol-1 ) than the smallest MG (-6.0 kcal mol-1 ), therefore, BCL catalyzes the conversion of triglycerides rather than MG, which is consistent with experimental results.

Comprehensive semisyntheses of catathelasmols C, D, and E from D-glutamic acid, utilizing lipase-catalyzed site-selective reactions on intermediates.

Catathelasmols C, D, and E, which had been isolated from Catathelasma imperiale as inhibitors for 11-hydroxysteroid dehydrogenases, were comprehensively semisynthesized from commercially available D-glutamic acid. The key synthetic intermediate, (R)-pentane-1,2,5-triol, was site-selectively acetylated by treatment with vinyl acetate and Candida antarctica lipase B (Novozym 435) in tetrahydrofuran (THF) at 25°C to furnish 1,5-diacetate (catathelasmol E, quantitative). The acetylation occurred site-selectively on the primary alcohols at the C-1 and C-5 positions over the secondary alcohol at the C-2 position. Dichromic acid oxidation provided 2-oxopentane-1,5-diyl diacetate (catathelasmol C, 78%). Burkholderia cepacia lipase-catalyzed transesterification with methanol in THF at - 5°C proceeded preferentially on the acetate at C-1 located adjacent to the C-2 carbonyl group over the other terminal acetate at the C-5 position. 5-Hydroxy-4-oxopentyl acetate (catathelasmol D) was obtained in 53% yield.

Enantioselective synthesis of a chiral intermediate of himbacine analogs by Burkholderia cepacia lipase A.

The enantiomers of (4R/S)-4-hydroxy-N, N-diphenyl-2-pentynamide are key chiral synthons for the synthesis of thrombin receptor antagonists such as vorapaxar. In this paper, we report the enzymatic preparation of enantiomerically enriched (4R)-4-hydroxy-N, N-diphenyl-2-pentynamide using lipase A from Burkholderia cepacia ATCC 25416 as the catalyst. First, the lipase gene (lipA) and its chaperone gene (lipB) was cloned and expressed in Escherichia coli system. After purification, lipase A activation was performed with the assistance of foldase lipase B. Enzyme assay revealed that the activated lipase A showed the optimal catalytic activity at 60 ºC and pH 7. The effects of various metals on the activity were investigated and results demonstrated that most of the metals inhibited the activity. To further improve the catalytic outcome, two-phase reaction was studied, and n-hexane proved to be a good organic solvent for the combination system. Using the optimize conditions, (4R)-4-hydroxy-N, N-diphenyl-2-pentynamide with 94.5% ee value and 48.93% conversion ratio was achieved. Our investigation on this lipase reveals lipase A as a promising biocatalyst for producing chiral propargyl alcohol for preparation of novel himbacine analogs.

Purification and characterization of new bio-plastic degrading enzyme from Burkholderia cepacia DP1.

Depolymerase is an enzyme that plays an important role in the hydrolysis of polyhydroxyalkanoates [PHAs]. In the current study, Burkholderia cepacia DP1 was obtained from Penang, Malaysia in which the enzyme was purified using ion exchange and gel filtration (Superdex-75) column chromatography. The molecular mass of the enzyme was estimated to be 53.3 kDa using SDS-PAGE. The enzyme activity was increased to 36.8 folds with the recovery of 16.3% after purification. The enzyme activity was detected between pH 6.0-10 and at 35-55 °C with pH 6.0 and 45 °C facilitating the maximum activity. Depolymerase was inactivated by Tween-20, Tween-80, SDS and PMSF, but insensitive to metal ions (Mg2+, Ca2+, K+, Na2+, Fe3+) and organic solvents (methanol, ethanol, and acetone). The apparent Km values of the purified P(3HB) depolymerase enzyme for P(3HB) and P(3HB-co-14%3HV) were 0.7 mg/ml and 0.8 mg/ml, respectively. The Vmax values of the purified enzyme were 10 mg/min and 8.89 mg/min for P(3HB) and P(3HB-co-14%3HV), respectively. The current study discovered a new extracellular poly(3-hydroxybutyrate) [P(3HB)] depolymerase enzyme from Burkholderia cepacia DP1 isolated and purified to homogeneity from the culture supernatant. To the best of our knowledge, this is the first report demonstrating the purification and biochemical characterization of P(3HB) depolymerase enzyme from genus Burkholderia.

Unprecedented Enzymatic Synthesis of Perfectly Structured Alternating Copolymers via "Green" Reaction Cocatalyzed by Laccase and Lipase Compartmentalized within Supramolecular Complexes.

This study describes the first use of laccase-lipase enzymatic reaction for the synthesis of novel perfectly structured alternating copolymers. Initially, six types of complexing agents, linear(A)-linear(B), linear(A)-linear(B)-linear(A), linear-dendritic, dendritic-linear-dendritic, linear-hyperbranched, and hyperbranched-linear-hyperbranched amphiphilic block copolymers, are proven to significantly enhance enzyme activity of three different types of lipases - Penicillium camemberti, Candida rugosa, and Burkholderia cepacia (up to 1400%, 1700%, and 870% increase with respect to the native enzymes). The copolymerization is performed in several consecutive steps: (a) lipase and laccase are dissolved in aqueous medium at neutral pH; (b) a complexing agent is added leading to cocompartmentalization of the two enzymes within a micelle or physical network; (c) the two comonomers are introduced simultaneously to the tandem enzyme complex. The reaction proceeds in the following pathway: laccase catalyzes the oxidation of catechol to o-quinone followed by lipase comediated Michael addition of a diamine. While laccase could catalyze the entire process, addition of lipase is able to increase copolymer yield up to 30.7%. Addition of a complexing agent improves the yield further up to 67.9% (23.2% yield obtained for native laccase). Complexing agents significantly increase polymer molecular mass ( Mw = 130 900 vs 35 500 Da for the native enzymes reaction system). The resulting copolymers are highly fluorescent (quantum yield up to 0.733) and demonstrate pH sensitive behavior, properties that hint toward their potential as imaging agents.

The shift in urea orientation at protein surfaces at low pH is compatible with a direct mechanism of protein denaturation.

Surface-specific spectroscopic data has shown that urea undergoes a shift in orientation at protein surfaces in acidic media. Since urea denatures proteins at a wide range of pHs, the variable chemical nature of protein-urea interactions has been used to support an indirect mechanism of urea-induced denaturation. Here, we use molecular dynamics simulations, minimum-distance distribution functions (MDDFs), and hydrogen-bond analysis, to characterize the interactions of urea with proteins at neutral and low pH, as defined by the protonation state of acidic residues. We obtain the expected preferential solvation by urea and dehydration, consistently with urea-induced denaturation, while the MDDFs allow for a solvent-shell perspective of protein-urea interactions. The distribution functions are decomposed into atomic contributions to show that there is indeed a shift in the orientation of urea molecules in the vicinity of acidic side-chains, as shown by the experimental spectroscopic data. However, this effect is local, and the interactions of urea with the other side chains and with the protein backbone are essentially unaffected at low pH. Therefore, hydrophobic solvation and urea-backbone hydrogen bonds can play a role in a direct mechanism of urea-induced protein denaturation without contradicting the observed variations in the chemical nature of protein-urea interactions as a function of the acidity of the solution.

Burkholderia cepacia lipase immobilization for hydrolytic reactions and the kinetic resolution of the non-equimolar mixtures of isomeric alcohols.

The major drawbacks of native lipase applications in processes occurring in water or in organic solvents include: difficulties in catalyst recycling, low activity and operational instability. The immobilization of Burkholderia cepacia lipase by adsorption or covalent binding onto 5 differently functionalized carriers (silica, acrylic, cellulose-based) was performed to overcome this problem. The optimization of the reaction preparation in water-rich media was based on the hydrolytic reactivity of the preparations, as well as the thermal, operational and storage stabilities. Aminated silica carrier, activated with glutaraldehyde, was determined to be the carrier of choice. Regarding processes in water-restricted media, carrier selection was based on reactivity after drying and five preparations were chosen for the resolution of a non-equimolar isomer mixture (85:15 ratio of R to S isomers), treating the kinetic resolution of ((+)-(S/R)-1-[(1S,5R)-6,6-dimethylbicyclo[3.1.0]hex-2-en-2-yl)]ethanol as a model. The resulting acetate of R configuration exhibits interesting sensory properties. The operational stability of the chosen catalysts was tested over 15 consecutive batch processes; the most beneficial results were obtained with lipase adsorbed on an acrylic carrier. Conversion increased gradually from 10 to 84% over the first five processes, which could be explained by the product sorption onto the carrier. Full kinetic resolution with maximal substrate conversion (approximately 84%) was achieved and remained stable during the next 10 runs, an excellent result, and thus, the proposed system might be regarded as an exceptionally attractive solution for the perfume and cosmetic industries.

Chiral ß-lactam-based integrin ligands through Lipase-catalysed kinetic resolution and their enantioselective receptor response.

Obtainment and testing of pure enantiomers are of great importance for bioactive compounds, because of the assessed implications of enantioselectivity in receptor-mediated responses. Herein we evaluated the use of biocatalysis to obtain enantiomerically pure ß-lactam intermediates further exploited in the synthesis of novel integrin ligands as single enantiomers. From a preliminary screening on a set of commercially available hydrolases, Burkholderia Cepacia Lipase (BCL) emerged as a suitable and highly performing enzyme for the kinetic resolution of a racemic azetidinone, key intermediate for the synthesis of novel agonists of integrins. Upon optimization of the biocatalytic protocol in terms of enzymes, acylating agents and procedures, the two ß-lactam enantiomers were obtained in excellent enantiomeric excesses (94% and 98% ee). Synthetic elaborations on the separated enantiomers allowed the synthesis of four chiral ß-lactams which were evaluated in cell adhesion assays on Jurkat cell line expressing α4ß1 integrin, and K562 cell line expressing α5ß1 integrin. Biological tests revealed that only (S)-enantiomers maintained the agonist activity of racemates with a nanomolar potency, and a specific enantio-recognition by integrin receptors was demonstrated.

Transcriptional analysis of the laccase-like gene from Burkholderia cepacia BNS and expression in Escherichia coli.

Bacterial laccases have received considerable attention because of several advantages associated with the higher environmental stability of these enzymes compared with fungal laccases. In this study, a laccase-like gene from Burkholderia cepacia BNS was successfully cloned. This gene was found to encode a mature protein of 279 amino acids that exhibited laccase activity in dimer form. The mature protein was found to contain approximately 4 mol of copper per monomer, and the metal ion-binding sites were predicted. BC_lacL gene transcription levels were analyzed by qRT-PCR to study expression patterns in the presence of different putative inducers (copper ions, guaiacol, veratryl alcohol, vanillin, coniferaldehyde, p-coumaric acid, sinapic acid, and ferulic acid). Copper ions had a positive effect on both transcription levels and intracellular laccase activity. Interestingly, upon induction with sinapic acid, BC_lacL gene transcription was lower than in the presence of copper ions, but laccase activity was highest under these conditions. The BC_lacL protein expressed in Escherichia coli exhibited a specific activity of 7.81 U/mg with 2,2'-azino-bis (3-ethylbenzothiazoline-6-sulfonic acid) (ABTS) as the substrate and 12.3 U/mg with 2,6-dimethoxyphenol (2,6-DMP) as the substrate after purification through Ni-affinity chromatography. The optimal activity and kinetic parameters of the recombinant BC_lacL protein were observed (kcat/Km = 3.96 s-1 µM-1) at a pH of 4.0 at 55 °C for ABTS oxidization and (kcat/Km = 11.6 s-1 µM-1) at a pH of 10.0 at 75 °C for 2,6-DMP oxidization. The protein exhibited high stability in an alkaline environment, with a half-life of more than 12 h. The same results were obtained via decolorization of eight dyes. Hence, this laccase-like enzyme may have potential industrial applications.

Alternative method to improve the ethyl valerate yield using an immobilised Burkholderia cepacia lipase.

This study is focussed on a biocatalysing chemical synthesis in order to produce a green apple flavour (ethyl valerate) using an immobilised lipase from Burkholderia cepacia. A strategy to improve the lipase stability during the esterification is used. In order to increase the ethyl valerate efficiency, an alternative method using the buffer pH to dissolve the lipase into alginate is proposed. Parameters of the immobilised lipase such as pH, temperature, activation energy and stirring speed are evaluated. The optimal condition using the substrate concentration and the lipase loading is provided. After 5 recyclability cycles, the immobilised lipase reveals a decreasing ∼25% in the ethyl valerate yield. An economical ester synthetising associated with the esterification efficiency is evidenced. This induces that a potential industrial application can be considered. This due to the demand for ethyl valerate in the flavour industry is required.

A Selective, Dual Emission ß-Alanine Aminopeptidase Activated Fluorescent Probe for the Detection of Pseudomonas aeruginosa, Burkholderia cepacia, and Serratia marcescens.

Selective detection of ß-alanyl aminopeptidase (BAP)-producing Pseudomonas aeruginosa, Serratia marcescens, and Burkholderia cepacia was achieved by employing the blue-to-yellow fluorescent transition of a BAP-specific enzyme substrate, 3-hydroxy-2-(p-dimethylaminophenyl)flavone derivative, incorporating a self-immolative linker to ß-alanine. Upon cellular uptake and accumulation of the substrate by viable bacterial colonies, blue fluorescence was generated, while hydrolysis of the N-terminal peptide bond by BAP resulted in the elimination of the self-immolative linker and the restoration of the original fluorescence of the flavone derivative.

Pore Environment Control and Enhanced Performance of Enzymes Infiltrated in Covalent Organic Frameworks.

In the drive toward green and sustainable methodologies for chemicals manufacturing, biocatalysts are predicted to have much to offer in the years to come. That being said, their practical applications are often hampered by a lack of long-term operational stability, limited operating range, and a low recyclability for the enzymes utilized. Herein, we show how covalent organic frameworks (COFs) possess all the necessary requirements needed to serve as ideal host materials for enzymes. The resultant biocomposites of this study have shown the ability boost the stability and robustness of the enzyme in question, namely lipase PS, while also displaying activities far outperforming the free enzyme and biocomposites made from other types of porous materials, such as mesoporous silica and metal-organic frameworks, exemplified in the kinetic resolution of the alcohol assays performed. The ability to easily tune the pore environment of a COF using monomers bearing specific functional groups can improve its compatibility with a given enzyme. As a result, the orientation of the enzyme active site can be modulated through designed interactions between both components, thus improving the enzymatic activity of the biocomposites. Moreover, in comparison with their amorphous analogues, the well-defined COF pore channels not only make the accommodated enzymes more accessible to the reagents but also serve as stronger shields to safeguard the enzymes from deactivation, as evidenced by superior activities and tolerance to harsh environments. The amenability of COFs, along with our increasing understanding of the design rules for stabilizing enzymes in an accessible fashion, gives great promise for providing "off the shelf" biocatalysts for synthetic transformations.

Burkholderia cepacia lipase: A versatile catalyst in synthesis reactions.

The lipase from Burkholderia cepacia, formerly known as Pseudomonas cepacia lipase, is a commercial enzyme in both soluble and immobilized forms widely recognized for its thermal resistance and tolerance to a large number of solvents and short-chain alcohols. The main applications of this lipase are in transesterification reactions and in the synthesis of drugs (because of the properties mentioned above). This review intends to show the features of this enzyme and some of the most relevant aspects of its use in different synthesis reactions. Also, different immobilization techniques together with the effect of various compounds on lipase activity are presented. This lipase shows important advantages over other lipases, especially in reaction media including solvents or reactions involving short-chain alcohols.