Bioinspired Nucleophilic Attack on a Tungsten-Bound Acetylene: Formation of Cationic Carbyne and Alkenyl Complexes.

Inspired by the proposed inner-sphere mechanism of the tungstoenzyme acetylene hydratase, we have designed tungsten acetylene complexes and investigated their reactivity. Here, we report the first intermolecular nucleophilic attack on a tungsten-bound acetylene (C2H2) in bioinspired complexes employing 6-methylpyridine-2-thiolate ligands. By using PMe3 as a nucleophile, we isolated cationic carbyne and alkenyl complexes.

Cinchona-alkaloid-based zwitterionic chiral stationary phases as potential tools for high-performance liquid chromatographic enantioseparation of cationic compounds of pharmaceutical relevance.

Enantiomers of cationic compounds of pharmaceutical relevance, namely tetrahydro-ß-carboline and 1,2,3,4-tetrahydroisoquinoline analogs, were separated by high-performance liquid chromatography. Separations were performed on Cinchona-alkaloid-based zwitterionic ion exchanger type chiral stationary phases applied as cation exchangers using mixtures of methanol and acetonitrile or tetrahydrofuran as bulk solvent components containing triethylammonium acetate or ammonium acetate as organic salt additives. On the zwitterionic ZWIX(+) and ZWIX(-) columns investigated, retention and enantioseparation of the studied basic analytes were influenced by the nature and concentration of the organic components of the mobile phase. The effect of organic salt additives on the retention behavior of the studied analytes can be described by the stoichiometric displacement model related to the counterion concentration. Investigations on the structure-retention relationships were performed applying different mobile phase systems for the two types of cationic analytes. For the thermodynamic characterization, parameters such as changes in standard enthalpy (Δ(ΔH°)), entropy (Δ(ΔS°)), and free energy (Δ(ΔG°)) were calculated on the basis of van't Hoff plots derived from the ln α versus 1/T curves. In most cases, enthalpy-driven enantioseparations were observed, with a consistent dependence of the calculated thermodynamic parameters on the mobile phase composition. Elution sequences of the studied compounds were determined in all cases.

The Application of 2,6-Bis(4-Methoxybenzoyl)-Diaminopyridine in Solvent Extraction and Polymer Membrane Separation for the Recovery of Au(III), Ag(I), Pd(II) and Pt(II) Ions from Aqueous Solutions.

The work describes the results of the first application of 2,6-bis(4-methoxybenzoyl)-diaminopyridine (L) for the recovery of noble metal ions (Au(III), Ag(I), Pd(II), Pt(II)) from aqueous solutions using two different separation processes: dynamic (classic solvent extraction) and static (polymer membranes). The stability constants of the complexes formed by the L with noble metal ions were determined using the spectrophotometry method. The results of the performed experiments clearly show that 2,6-bis(4-methoxybenzoyl)-diaminopyridine is an excellent extractant, as the recovery was over 99% for all studied noble metal ions. The efficiency of 2,6-bis(4-methoxybenzoyl)-diaminopyridine as a carrier in polymer membranes after 24 h of sorption was lower; the percentage of metal ions removal from the solutions (%Rs) decreased in following order: Ag(I) (94.89%) > Au(III) (63.46%) > Pt(II) (38.99%) > Pd(II) (23.82%). The results of the desorption processes carried out showed that the highest percentage of recovery was observed for gold and silver ions (over 96%) after 48 h. The results presented in this study indicate the potential practical applicability of 2,6-bis(4-methoxybenzoyl)-diaminopyridine in the solvent extraction and polymer membrane separation of noble metal ions from aqueous solutions (e.g., obtained as a result of WEEE leaching or industrial wastewater).

Stepwise Ethanol-Water Fractionation of Enzymatic Hydrolysis Lignin to Improve Its Performance as a Cationic Dye Adsorbent.

In this work, lignin fractionation is proposed as an effective approach to reduce the heterogeneity of lignin and improve the adsorption and recycle performances of lignin as a cationic dye adsorbent. By stepwise dissolution of enzymatic hydrolysis lignin in 95% and 80% ethanol solutions, three lignin subdivisions (95% ethanol-soluble subdivision, 80% ethanol-soluble subdivision, and 80% ethanol-insoluble subdivision) were obtained. The three lignin subdivisions were characterized by gel permeation chromatography (GPC), FTIR, 2D-NMR and scanning electron microscopy (SEM), and their adsorption capacities for methylene blue were compared. The results showed that the 80% ethanol-insoluble subdivision exhibited the highest adsorption capacity and its value (396.85 mg/g) was over 0.4 times higher than that of the unfractionated lignin (281.54 mg/g). The increased adsorption capacity was caused by the enhancement of both specific surface area and negative Zeta potential. The maximum monolayer adsorption capacity of 80% ethanol-insoluble subdivision by adsorption kinetics and isotherm studies was found to be 431.1 mg/g, which was much higher than most of reported lignin-based adsorbents. Moreover, the 80% ethanol-insoluble subdivision had much higher regeneration yield (over 90% after 5 recycles) compared with the other two subdivisions. Consequently, the proposed fractionation method is proved to be a novel and efficient non-chemical modification approach that significantly improves adsorption capacity and recyclability of lignin.

Injection system for fast capillary electrophoresis based on pressure regulation with flow restrictors.

A fast automated system for rapid electrophoretic separations in short conventional capillaries employing contactless conductivity detection is presented. The instrument is based on pneumatic pressurization and does not require a conventional pump. The required pressures and flow rates for the different steps of the injection and flushing processes are produced with the help of two flow restrictors. The device is implemented on a microfluidic breadboard with dimensions of ca. 13 × 20 cm and employs miniature valves. Nine inorganic cations, namely NH4+, K+ , Na+ , Ca2+ , Mg2+ , Mn2+ , Sr2+ , Li+ , and Ba2+ , could be separated in a capillary of 10 µm inner diameter and 6 cm effective length within 25 s. Following a reduction of the effective length to 4 cm, still five inorganic cations could be separated in a time span of 12 s. The repeatability of peak areas was better than 3.1 % and limits of detection between 3.5 and 5.5 µM were achieved.

Dual-opposite injection capillary electrophoresis: Principles and misconceptions.

Dual-opposite injection capillary electrophoresis (DOI-CE) is a separation technique that utilizes both ends of the capillary for sample introduction. The electroosmotic flow (EOF) is suppressed to allow all ions to reach the detector quickly. Depending on the individual electrophoretic mobilities of the analytes of interest and the effective length that each analyte travels to the detection window, the elution order of analytes in a DOI-CE separation can vary widely. This review discusses the principles, applications, and limitations of dual-opposite injection capillary electrophoresis. Common misconceptions regarding DOI-CE are clarified.

Production of low-expressing recombinant cationic biopolymers with high purity.

The growing complexity of recombinant biopolymers for delivery of bioactive agents requires the ability to control the biomaterial structure with high degree of precision. Genetic engineering techniques have provided this opportunity to synthesize biomaterials in an organism such as E. coli with full control over their lengths and sequences. One class of such biopolymers is recombinant cationic biopolymers with applications in gene delivery, regenerative medicine and variety of other biomedical applications. Unfortunately, due to their highly cationic nature and complex structure, their production in E. coli expression system is marred by low expression yield which in turn complicates the possibility of obtaining pure biopolymer. SlyD and ArnA endogenous E. coli proteins are considered the major culprits that copurify with the low-expressing biopolymers during the metal affinity chromatography. Here, we compared the impact of different parameters such as the choice of expression hosts as well as metal affinity columns in order to identify the most effective approach in obtaining highly pure recombinant cationic biopolymers with acceptable yield. The results of this study showed that by using E. coli BL21(DE3) LOBSTR strain and in combination with our developed stringent expression and Ni-NTA purification protocols highly pure products in one purification step (>99% purity) can be obtained. This approach could be applied to the production of other complex and potentially toxic biopolymers with wide range of applications in biomedicine.

Electrokinetic sample preconcentration and hydrodynamic sample injection for microchip electrophoresis using a pneumatic microvalve.

A microfluidic platform was developed to perform online electrokinetic sample preconcentration and rapid hydrodynamic sample injection for zone electrophoresis using a single microvalve. The polydimethylsiloxane microchip comprises a separation channel, a side channel for sample introduction, and a control channel which is used as a pneumatic microvalve aligned at the intersection of the two flow channels. The closed microvalve, created by multilayer soft lithography, serves as a nanochannel preconcentrator under an applied electric potential, enabling current to pass through while preventing bulk flow. Once analytes are concentrated, the valve is briefly opened and the stacked sample is pressure injected into the separation channel for electrophoretic separation. Fluorescently labeled peptides were enriched by a factor of ∼450 in 230 s. This method enables both rapid analyte concentration and controlled injection volume for high sensitivity, high-resolution CE.

Electrophoretic extraction of low molecular weight cationic analytes from sodium dodecyl sulfate containing sample matrices for their direct electrospray ionization mass spectrometry.

While the use of sodium dodecyl sulfate (SDS) in separation buffers allows efficient analysis of complex mixtures, its presence in the sample matrix is known to severely interfere with the mass-spectrometric characterization of analyte molecules. In this article, we report a microfluidic device that addresses this analytical challenge by enabling inline electrospray ionization mass spectrometry (ESI-MS) of low molecular weight cationic samples prepared in SDS containing matrices. The functionality of this device relies on the continuous extraction of analyte molecules into an SDS-free solvent stream based on the free-flow zone electrophoresis (FFZE) technique prior to their ESI-MS analysis. The reported extraction was accomplished in our current work in a glass channel with microelectrodes fabricated along its sidewalls to realize the desired electric field. Our experiments show that a key challenge to successfully operating such a device is to suppress the electroosmotically driven fluid circulations generated in its extraction channel that otherwise tend to vigorously mix the liquid streams flowing through this duct. A new coating medium, N-(2-triethoxysilylpropyl) formamide, recently demonstrated by our laboratory to nearly eliminate electroosmotic flow in glass microchannels was employed to address this issue. Applying this surface modifier, we were able to efficiently extract two different peptides, human angiotensin I and MRFA, individually from an SDS containing matrix using the FFZE method and detect them at concentrations down to 3.7 and 6.3 µg/mL, respectively, in samples containing as much as 10 mM SDS. Notice that in addition to greatly reducing the amount of SDS entering the MS instrument, the reported approach allows rapid solvent exchange for facilitating efficient analyte ionization desired in ESI-MS analysis.

Selective Dissolution of A-Site Cations in ABO3 Perovskites: A New Path to High-Performance Catalysts.

Selective dissolution is a common corrosion process in dealloying in which an alloy is immersed in acid to remove the active element, leaving behind an inert constituent. We introduce this technique into the treatment of oxide catalysts. A three-dimensionally ordered macroporous LaMnO3 perovskite has been prepared and treated with diluted HNO3 to selectively remove La cations, acquiring a novel γ-MnO2-like material. LaMnO3 is not a satisfactory catalyst on CO oxidation. Upon the removal of La cations, the obtained sample showed a significantly higher CO oxidation catalytic activity (T50=89 °C) than the initial precursor LaMnO3 (T50=237 °C) and ordinary γ-MnO2 (T50=148 °C). A large surface area, a high degree of mesoporosity, excellent low-temperature reducibility, and especially improved surface oxygen species are deduced to be responsible for CO oxidation at lower temperatures.

Separation of cationic analytes by nonionic micellar electrokinetic chromatography using polyoxyethylene lauryl ether surfactants with different polyoxyethylene length.

Although nonionic micellar electrokinetic chromatography is used for the separation of charged compounds that are not easily separated by capillary zone electrophoresis, the effect of the hydrophilic moiety of the nonionic surfactant has not been studied well. In this study, the separation of ultraviolet-absorbing amino acids was studied in electrokinetic chromatography using neutral polyoxyethylene lauryl ether surfactants (Adekatol) in the separation solution. The effect of the polyethylene moiety (the number of repeating units was from 6.5 to 50) of the hydrophobic test amino acids (methionine, tryptophan, and tysorine) was studied using a 10 cm effective length capillary. The separation mechanism was based on hydrophobic as well as hydrogen bonding interactions at the micellar surface, which was made of the polyoxyethylene moiety. The length of the polyoxyethylene moiety of the surfactants was not important in nonionic micellar electrokinetic chromatography mode.

Isolation and X-ray crystal structures of triarylphosphine radical cations.

Salts containing triarylphosphine radical cations 1(•+) and 2(•+) have been isolated and characterized by electron paramagnetic resonance (EPR) and UV-vis absorption spectroscopy as well as single-crystal X-ray diffraction. Radical 1(•+) exhibits a relaxed pyramidal geometry, while radical 2(•+) becomes fully planar. EPR studies and theoretical calculations showed that the introduction of bulky aryl groups leads to enhanced p character of the singly occupied molecular orbital, and the radicals become less pyramidalized or fully flattened.

Tailor-made micro-object optical sensor based on mesoporous pellets for visual monitoring and removal of toxic metal ions from aqueous media.

Methods for the continuous monitoring and removal of ultra-trace levels of toxic inorganic species (e.g., mercury, copper, and cadmium ions) from aqueous media such as drinking water and biological fluids are essential. In this paper, the design and engineering of a simple, pH-dependent, micro-object optical sensor is described based on mesoporous aluminosilica pellets with an adsorbed dressing receptor (a porphyrinic chelating ligand). This tailor-made optical sensor permits ultra-fast (≤ 60 s), specific, pH-dependent visualization and removal of Cu(2+) , Cd(2+) , and Hg(2+) at sub-picomolar concentrations (∼10(-11) mol dm(-3) ) from aqueous media, including drinking water and a suspension of red blood cells. The acidic active acid sites of the pellets consist of heteroatoms arranged around uniformly shaped pores in 3D nanoscale gyroidal mesostructures densely coated with the chelating ligand. The sensor can be used in batch mode, as well as in a flow-through system in which sampling, target ion recognition and removal, and analysis are integrated in a highly automated and efficient manner. Because the pellets exhibit long-term stability, reproducibility, and versatility over a number of analysis/regeneration cycles, they can be expected to be useful for the fabrication of inexpensive sensor devices for naked-eye detection of toxic pollutants.

Characterization of microchip electrophoresis devices fabricated by direct-printing process with colored toner.

This paper reports for the first time the use of colored toner to produce polyester toner (PT) ME devices. Colored PT devices were designed in drawing software and printed on a polyester film using a color laser printer with 3600 dpi resolution. The colored toner is composed of a copolymer mixture (styrene and acrylate), wax, silicon dioxide, and pigments. The presence of silica in the toner composition has enhanced the EOF magnitude and improved the analytical performance. For a pH range between 2 and 12, the EOF measured on a magenta PT chip, for example, ranged from 3.8 to 5.8 (× 10(-4) cm(2) V(-1) s(-1) ). Typical separations of inorganic cations (K(+) , Na(+) , and Li(+) ) were used as model system to investigate the analytical feasibility of the proposed devices. The repeatability for the migration times of all analytes exhibited RSD values lower than 1% (n = 10). The separation efficiencies found on colored PT devices ranged from 10 000 to 49 000 plates/m, which means between 7 and 23% of the maximum theoretical efficiency on this microfluidic platform (1.85 × 10(5) plates/m). The improvements achieved on the proposed devices are associated with the small additional amount of silica on the toner composition as well as the printing of channels with smoother surfaces and better uniformity when compared to the conventional PT chips printed with monochromatic laser printers.

Sweeping of alprenolol enantiomers with an organic solvent and sulfated ß-cyclodextrin in capillary electrophoresis.

Sweeping, an on-line sample concentration technique in CE, is the picking and accumulation of analytes by the pseudostationary phase or complexing additive. In the presence of an electric field, the analytes concentrated at the additive front that initially penetrated the sample zone. Here, we describe the sweeping of cationic alprenolol enantiomers using sulfated ß-CD and organic solvent. The separation solution contained the anionic additive while ACN was in the sample solution. With fused silica capillaries, positive polarity, and solutions buffered at pH 3, the direction of the enantiomers' effective electrophoretic mobility was the same as the electrophoretic mobility (or electrophoretic mobility without additive). When the amount of ACN in the sample was increased (i.e. 60%), the interaction between the analytes and additive became negligible. This caused the sweeping boundary to shift from the electrophoretically moving ß-CD front to the zone between the sample and separation solution. The equation that described the narrowing of injected sample zone was derived. The performance of sweeping with 60% ACN in the sample was then studied under different operating conditions (e.g. type of injection, injection time, and CD concentration). The low interaction between enantiomers and additive gave only moderate increases in sensitivity (approximately tenfold), but was improved when field enhancement was used during electrokinetic injection. With a conductivity difference (separation/sample solution) of 70 and a short injection time of 30 s at 20 kV, peak improvements of >100-fold was easily achieved.

Solvatochromic behavior of chiral mesoporous metal-organic frameworks and their applications for sensing small molecules and separating cationic dyes.

Two anionic metal-organic frameworks (MOFs) with 1D mesoporous tubes (1) and chiral mesoporous cages (2) have been rationally constructed by means of a predesigned size-extended hexatopic ligand, namely, 5,5',5''-(1,3,5-triazine-2,4,6-triyl)tris- (azanediyl)triisophthalate (TATAT). Charge neutrality is achieved by protonated dimethylamine cations. Notably, the two MOFs can be used to separate large molecules based on ionic selectivity rather than the size-exclusion effect so far reported in the literature. Owing to the imino triazine backbone and carboxyl groups of the hexatopic ligand, which provide important host-guest interactions, rare solvatochromic phenomena of 1 and 2 are observed on incorporating acetone and ethanol guests. Furthermore, guest-dependent luminescence properties of compound 2 were investigated, and the results show that luminescence intensity is significantly enhanced in toluene and benzene, while quenching effects are observed in acetone and ethanol. Thus, compound 2 may be a potential material for luminescent probes.

Potential use of calcareous mudstones in low hydraulic conductivity earthen barriers for environmental applications.

Earthen layers play a significant role in isolating contaminants in the subsurface, controlling the migration of contaminant plumes, and as landfill liners and covers. The physical, chemical and mineralogical properties of three calcareous mudstones from the Jagüel and Roca formations in North Patagonia, Argentina, are evaluated to determine their potential for the construction of liners. These mudstones were deposited in a marine environment in the Upper Cretaceous-Paleocene. The tested specimens mainly comprise silt and clay-sized particles, and their mineralogy is dominated by a smectite/illite mixed layer (70-90% Sm) and calcite in smaller proportion. Powdered mudstone samples have little viscosity and swelling potential when suspended in water. The hydraulic conductivity of compacted mudstones and sand-mudstone mixtures is very low (around 1-3 x 10(-10) m/s) and in good agreement with the expected hydraulic behaviour of compacted earthen layers. This behaviour can be attributed to the large amount of fine particles, high specific surface and the close packing of particles as confirmed by scanning electron microscope analysis. The tested materials also show a high cation exchange capacity (50-70 cmol/kg), indicating a high contaminant retardation capability. The calcareous mudstones show satisfactory mineralogical and chemical properties as well as an adequate hydraulic behaviour, demonstrating the potential use of these materials for the construction of compacted liners for the containment of leachate or as covers in landfills. These findings confirm the potential usage of marine calcareous mudstones as a low-cost geomaterial in environmental engineering projects.

Sample stacking by field-amplified sample injection and sweeping for simultaneous analysis of acidic and basic components in clinic application.

In this study, online sample concentration method, which coupled field-amplified sample injection (FASI) and sweeping technology with micellar electrokinetic chromatography (MEKC), was used to detect and analyze acidic and basic components in a single run. In order to concentrate the acidic and basic components simultaneously in a single run sweeping step, a combination of successive anion- and cation-selective injections were used. Before sample loading, a rinse buffer containing 50 mM Tris buffer (pH 3) with 41% MeOH and 0.1% polyethylene oxide (PEO) was injected in order to suppress the electroosmotic flow (EOF). Sample loading of anionic components was achieved by electrokinetic injection at a negative voltage of -2.5 kV for 80 s, and then the cationic components were injected at a positive voltage of +5 kV for 120 s. Finally, sweeping with SDS micelles from the separation buffer (25 mM Tris buffer with 60 mM SDS, pH 3) was performed at a negative voltage of -20 kV. This capillary electrophoretic methodology was applied to the quantification of acidic and basic drugs in commercial tablets and in plasma samples. The precision and accuracy of the proposed method at different concentrations ranging from high, medium, to low were evaluated on spiked plasma samples. The intra and interday precision and accuracy values at three concentrations were all below 6.1%. The method was also successfully applied to monitor the tested drugs in the plasma of nine elderly cardiovascular and/or Alzheimer's disease patients after oral administration of the commercial products.

Differentiation of isomeric pentose disaccharides by electrospray ionization tandem mass spectrometry and discriminant analysis.

RATIONALE: The structural characterization of unknown oligosaccharides remains a big challenge since a large number of isomeric structures are possible even for disaccharides. In this work, electrospray ionization collision-induced dissociation tandem mass spectrometry (ESI-CID-MS/MS) was used for the differentiation of isomeric pentose disaccharides, α-(1 → 5)-L-arabinobiose (Ara(2)) and ß-(1 → 4)-D-xylobiose (Xyl(2)). METHODS: ESI-MS/MS spectra of [M + Li](+) and [M + Na](+) ions of Ara(2) and Xyl(2), as well as these precursor ions of (18)O-labelled disaccharides, were acquired using two mass spectrometers equipped with different analyzers: LIT (linear ion trap) and Q-TOF (quadrupole time-of-flight). RESULTS: Product ions observed in MS/MS spectra arise from the cleavage at the nonreducing side of the glycosidic bond (Y(1)(+)) and from cross-ring cleavages (0,1)A(2)(+), (0,2)A(2)(+), and (0,3)A(2)(+) at the reducing residue. Statistically significant differences were observed between the relative abundance of specific product ions, when comparing both disaccharides. These differences allowed discriminant models to be built and to propose a criterion using the relative abundances of selected ions capable of discriminating between the isomers for both adduct ions and spectrometers. CONCLUSIONS: Isomeric pentose disaccharides can be distinguished based on the fragmentation of both [M + Li](+) and [M + Na](+) ions and using different mass spectrometers. However, LIT instrument has a better discriminant power.

Effective removal of metal ions and cationic dyes from aqueous solution using different hydrazine-dopamine modified sodium alginate.

In this paper, DSA-AAD-DA and DSA-TPDH-DA were prepared to effectively remove metal ions and cationic dyes from aqueous solution. The hydrazone structure was prepared by hydrazide-modified SA which captured metal ions selectively, and the remaining functional groups were used as active adsorption sites for cationic dyes. The thermodynamic parameter for the sorption demonstrated the process is endothermic and spontaneous. In single process, the adsorption of metal ions by DSA-AAD-DA and DSA-TPDH-DA correlated well with the Freundlich model through the hydrazone structure coordination and ion exchange which was mainly chemical adsorption, and cationic dyes adsorption correlated well with the Langmuir model which was shown monolayer adsorption was dominant by hydrogen bonding, electrostatic interaction, and π-π interaction. In binary system, the mixed adsorption shown significant antagonism effect in high concentration, but cationic dyes and metal ions in low concentration were efficiently and simultaneously removed, the adsorption ability of DSA-TPDH-DA was much better than DSA-AAD-DA. Moreover, adsorption efficiency can still maintain more than 80% after five times adsorption-desorption recycle. Therefore, DSA-AAD-DA and DSA-TPDH-DA possessed great potential for wastewater treatment.