Pharmaceutical Residues in Edible Oysters along the Coasts of the East and South China Seas and Associated Health Risks to Humans and Wildlife.

The investigation of pharmaceuticals as emerging contaminants in marine biota has been insufficient. In this study, we examined the presence of 51 pharmaceuticals in edible oysters along the coasts of the East and South China Seas. Only nine pharmaceuticals were detected. The mean concentrations of all measured pharmaceuticals in oysters per site ranged from 0.804 to 15.1 ng g-1 of dry weight, with antihistamines being the most common. Brompheniramine and promethazine were identified in biota samples for the first time. Although no significant health risks to humans were identified through consumption of oysters, 100-1000 times higher health risks were observed for wildlife like water birds, seasnails, and starfishes. Specifically, sea snails that primarily feed on oysters were found to be at risk of exposure to ciprofloxacin, brompheniramine, and promethazine. These high risks could be attributed to the monotonous diet habits and relatively limited food sources of these organisms. Furthermore, taking chirality into consideration, chlorpheniramine in the oysters was enriched by the S-enantiomer, with a relative potency 1.1-1.3 times higher when chlorpheniramine was considered as a racemate. Overall, this study highlights the prevalence of antihistamines in seafood and underscores the importance of studying enantioselectivities of pharmaceuticals in health risk assessments.

Novel HPTLC method for simultaneous estimation from ternary mixture of chlorpheniramine maleate, dextromethorphan hydrobromide and phenylephrine hydrochloride in syrup formulations.

OBJECTIVES: A synergic antihistamine, cough suppressant, and decongestant combination of chlorpheniramine, dextromethorphan, and phenylephrine is used to treat acute respiratory infections caused by seasonal viruses. The effective qualitative and quantitative methods require the simultaneous measurement of a ternary combination in the pharmaceutical syrup dosage form. Therefore, a new, simple, fast and robust high performance thin layer chromatographic (HPTLC) method has been developed and validated for chlorpheniramine maleate (CPM), dextromethorphan hydrobromide (DEXO) and phenylephrine hydrochloride (PE). MATERIAL AND METHODS: The chromatographic separation was carried out on precoated aluminium plates with silica gel 60 F254 as the stationary phase. Mobile phase used was chloroform: methanol: ammonia (2.5:7.5:0.3, v/v/v) for proper separation. The detection was carried out at 270nm wavelength in absorbance mode. Developed method was validated as per International Council for Harmonization (ICH) Q2 (R1) guideline. RESULTS: The linearity range is 400 to 1400ng/band for CPM, 3000 to 11500ng/band for DEXO and 1000 to 3500ng/band for PE with correlation coefficient ≥ 0.995. The consistent lower values of relative standard deviation (RSD, %) for precision and robustness study indicate the method reliability. The percent recovery ranged from 97.82 to 102.03% indicates the good accuracy of the method. CONCLUSION: The proposed method was complying for the analytical method validation parameters suggested by the ICH Q2 (R1) guideline. The method was found to be simple, rapid and reliable for the simultaneous estimation of CPM, DEXO and PE from its pharmaceutical syrup dosage form. The method was successfully applied to quantify these analytes from the several pharmaceutical syrup dosage form.

Development and validation of a simultaneous analytical method for non-steroidal therapeutic compounds in cosmetics using liquid chromatography-tandem mass spectrometry.

Atopic dermatitis is a typical chronic inflammatory skin disease that affects all age groups and requires basic skin care for treatment. Anti-inflammatory and antiallergy steroids are the most frequently used treatments but they are limited due to their side effects caused by a weakening of the immune system. Many consumers focus on performance as a criterion for selecting cosmetics. However, steroids have been illegally used to improve the performance of cosmetics, and consumers have been adversely affected by the corresponding side effects. In this paper, we propose a simple and rapid method using liquid chromatography-tandem mass spectrometry to simultaneously analyze ten non-permitted atopic therapeutic compounds in cosmetic products: chlorpheniramine maleate, ketotifen fumarate, doxepin hydrochloride, azelastine hydrochloride, bufexamac, clotrimazole, tranilast, fusidic acid, tacrolimus, and pimecrolimus. Additionally, the major characteristic fragment ions for tacrolimus, pimecrolimus, and clotrimazole were identified by time-of-flight mass spectrometry. The specificity, linearity, limit of detection, limit of quantification, recovery, precision, accuracy, and stability of the proposed method were validated. The limit of detection and quantification were in the ranges of 5.05-203.30 pg/mL and 15.15-609.90 pg/mL, respectively. The proposed analysis method could help improve the safety management of cosmetics.

Spectrophotometric method development and validation for determination of chlorpheniramine maleate in bulk and controlled release tablets.

Spectrophotometric technique is considered to be the simplest and operator friendly among other available analytical methods for pharmaceutical analysis. The objective of the study was to develop a precise, accurate and rapid UV-spectrophotometric method for the estimation of chlorpheniramine maleate (CPM) in pure and solid pharmaceutical formulation. Drug absorption was measured in various solvent systems including 0.1N HCl (pH 1.2), acetate buffer (pH 4.5), phosphate buffer (pH 6.8) and distil water (pH 7.0). Method validation was performed as per official guidelines of ICH, 2005. High drug absorption was observed in 0.1N HCl medium with λmax of 261nm. The drug showed the good linearity from 20 to 60µg/mL solution concentration with the correlation coefficient linear regression equation Y= 0.1853 X + 0.1098 presenting R2 value of 0.9998. The method accuracy was evaluated by the percent drug recovery, presents more than 99% drug recovery at three different levels assessed. The % RSD value <1 was computed for inter and intraday analysis indicating the high accuracy and precision of the developed technique. The developed method is robust because it shows no any significant variation in with minute changes. The LOD and LOQ values were assessed to be 2.2µg/mL and 6.6µg/mL respectively. The investigated method proved its sensitivity, precision and accuracy hence could be successfully used to estimate the CPM content in bulk and pharmaceutical matrix tablets.

[Research on NIR-CI parameters optimization of chlorpheniramine maleate tablets based on binary image and statistical measurement].

The optimization method was established to investigate the effect of near infrared chemical imaging (NIR-CI) detection parameters on hyperspectral data quality. In order to optimize the detection parameters, chlorpheniramine maleate (CPM) tablets were chosen as examples and the L9(3(4)) orthogonal-test design was adopted to research the effects of spectral resolution, spatial resolution, scan times and scan height. Binary image coupled with statistical measurement was proposed to quantitatively analyze hyperspectral data and determine the content of CPM on the tablet surface. High-performance liquid chromatography (HPLC) was used as reference method for accurate CPM determination. The absolute value of the difference between CPM con- tents obtained from NIR-CI and HPLC was chosen as index. The result demonstrated that the optimum parameters for acquiring hyperspectral data were: 25 µm x 25 µm (spatial resolution), 5340 (scan height, the value of Z, precise focus), 16 cm(-1) (spectral resolution) and 16 (scan times). The influence of scan height on hyperspectral data was firstly investigated. The optimized parameters could be applied to CPM tablets and other drugs for NIR-CI data acquisition and methodology establishment.

Development of a novel UPLC approach to co-prediction of four active compounds in a multi-component pharmaceutical preparation.

In this work, a new ultra-performance liquid chromatography method based on photodiode array detection (UPLC-PDA) was first developed for the quantitative analysis of the quaternary mixture of ascorbic acid (AA), paracetamol (PAR), caffeine (CAF) and chlorpheniramine maleate (CPA) in a commercial dosage form. The developed UPLC-PDA method offered a new possibility for the co-determination of four active ingredients in a drug combination with short run time and simple sample preparation. The successful chromatographic separation of the four drugs was performed using a Waters Acquity UPLC BEH C18 column (1.7 µm 2.1 × 100 mm) (Mildford, USA) and a mobile phase consisting of water (12 %), acetonitrile (13 %) and 0.1 M H3PO4 (75 %) at a flow rate of 0.25 mL/min. The validation of the proposed UPLC-PDA approach was verified by analyzing synthetic mixtures, inter- and intra-day experiments, and commercial powder samples and provided satisfactory results.

Development of Response Surface Approach for Determination of Paracetamol, Chlorpheniramine Maleate, Caffeine and Ascorbic Acid by Green HPLC Method: A Desirability-Based Optimization.

Design of experiment is an efficient and cost-effective tool to optimize the chromatographic separation of a multicomponent mixture. The central composite design was conducted to develop and optimize a green high performance liquid chromatography (HPLC) method for simultaneous quantitation of a quaternary mixture of paracetamol, chlorpheniramine maleate, caffeine and ascorbic acid in their pharmaceutical dosage form as well as the determination of their dissolution profile. A five-level three-factor model was performed to investigate the effect of mobile phase composition, pH and flow rate on enhanced resolution and short run time. Analysis was performed using a Kinitex EVO C18 column and a mobile phase composed of methanol: 0.02 M phosphate buffer pH 3.3 (34:66, v/v) at 1.0 mL/min using photodiode array detection. Optimum chromatographic separation was achieved in <6 min with a desirability of 0.999. Linearity was achieved over a range of 1.00-300.00, 1.00-50.00, 2.00-50.00 and 2.00-100.00 µg/mL for paracetamol, chlorpheniramine maleate, caffeine and ascorbic acid, respectively, with a limit of detection (<0.1 µg/mL). The greenness profile was evaluated using the analytical eco-scale and Analytical GREEnness Metric Approach with values of 81 and 0.77, respectively.

[Rapid identification 15 effective components of anti common cold medicine with MRM by LC-MS/MS].

This paper reports the establishment of a method for rapid identification 15 effective components of anti common cold medicine (paracetamol, aminophenazone, pseudoephedrine hydrochloride, methylephedrine hydrochloride, caffeine, amantadine hydrochloride, phenazone, guaifenesin, chlorphenamine maleate, dextromethorphen hydrobromide, diphenhydramine hydrochloride, promethazine hydrochloride, propyphenazone, benorilate and diclofenac sodium) with MRM by LC-MS/MS. The samples were extracted by methanol and were separated from a Altantis T3 column within 15 min with a gradient of acetonitrile-ammonium acetate (containing 0.25% glacial acetic acid), a tandem quadrupole mass spectrometer equipped with electrospray ionization source (ESI) was used in positive ion mode, and multiple reaction monitoring (MRM) was performed for qualitative analysis of these compounds. The minimum detectable quantity were 0.33-2.5 microg x kg(-1) of the 15 compounds. The method is simple, accurate and with good reproducibility for rapid identification many components in the same chromatographic condition, and provides a reference for qualitative analysis illegally added chemicals in anti common cold medicine.

Report: Simultaneous determination of naphazoline hydrochloride, chlorpheniramine maleate and methylene blue in their ternary mixture.

Validated spectrophotometric and chemometric methods were developed for determination of Naphazoline Hydrochloride (NAP), Chlorpheniramine maleate (CLO) and Methylene blue (MB) in their ternary mixture. Method A was a spectrophotometric method, where NAP and MB were determined using second derivative (D²) spectrophoto metric method using the peak amplitudes at 299 nm and 337 nm for NAP and MB respectively , while CLO was determined using second derivative ratio (DD²) spectrophotometric method using the peak amplitude at 276.6 nm. Method B used the chemometric techniques; principal component regression (PCR) and partial least squares (PLS) for determination of NAP, CLO and MB using the information contained in the absorption spectra of their ternary mixture solutions. The proposed methods have been successfully applied for the analysis of NAP, CLO and MB in their pharmaceutical formulation and the obtained results were statistically compared with the reported methods.

Comparison of the determination of a low-concentration active ingredient in pharmaceutical tablets by backscatter and transmission Raman spectrometry.

A total of 383 tablets of a pharmaceutical product were analyzed by backscatter and transmission Raman spectrometry to determine the concentration of an active pharmaceutical ingredient (API), chlorpheniramine maleate, at the 2% m/m (4 mg) level. As the exact composition of the tablets was unknown, external calibration samples were prepared from chlorpheniramine maleate and microcrystalline cellulose (Avicel) of different particle size. The API peak at 1594 cm(-1) in the second derivative Raman spectra was used to generate linear calibration models. The API concentration predicted using backscatter Raman measurements was relatively insensitive to the particle size of Avicel. With transmission, however, particle size effects were greater and accurate prediction of the API content was only possible when the photon propagation properties of the calibration and sample tablets were matched. Good agreement was obtained with HPLC analysis when matched calibration tablets were used for both modes. When the calibration and sample tablets are not chemically matched, spectral normalization based on calculation of relative intensities cannot be used to reduce the effects of differences in physical properties. The main conclusion is that although better for whole tablet analysis, transmission Raman is more sensitive to differences in the photon propagation properties of the calibration and sample tablets.

Development and validation of RP-HPLC method for simultaneous estimation of nimesulide, phenylephrine hydrochloride, chlorpheniramine maleate and caffeine anhydrous in pharmaceutical dosage form.

In this study, a simple, specific and accurate reverse phase high performance liquid chromatographic method was developed for the simultaneous determination of nimesulide (NS), phenylephrine hydrochloride (PE), chlorpheniramine maleate (CPM) and caffeine anhydrous (CF) in pharmaceutical dosage forms. A reversed phase Hypersil phenyl column (4.6 mm x 25 cm) with mobile phase having pH 5.5 consisting of methanol and buffer (55:45, v/v) was used. The flow rate was 1.0 mL per minute and the effluents were monitored at 214 nm. The retention times of all the drugs were found to be 7.47 min (NS), 3.944 min (PE), 4.55 min (CF) and 17.15 min (CPM), respectively. The linearity for all the drugs was obtained in the range of 300-800 microg/mL (NS), 15-32 microg/mL (PE), 16-32 microg/mL (CPM) and 30-180 microg/mL (CF), respectively. The results of analysis have been well validated according to guidelines of International Conference of Harmonisation of technical requirements for registration of pharmaceuticals for human use. The method was found to be simple, precise, economical, less time consuming and reproducible. Hence, the suggested procedure could be used for the determination of all the four drugs in commercial preparations.

Stability-Indicating New RP-UPLC Method for Simultaneous Determination of a Quaternary Mixture of Paracetamol, Pseudoephedrine, Chlorpheniramine, and Sodium Benzoate in (Cold-Flu) Syrup Dosage Form.

BACKGROUND: A combination of paracetamol, pseudoephedrine, chlorpheniramine, and sodium benzoate in (Cold-Flu) 1,2,3 Syrup dosage form is specified for the treatment of common cold and flu symptoms. OBJECTIVE: The functional role of this study is to develop a novel, reliable, and selective stability-indicating reversed-phase ultra-performance liquid chromatography (RP-UPLC) method for simultaneous identification of a quaternary mixture of paracetamol, pseudoephedrine, chlorpheniramine, and sodium benzoate in (Cold-Flu) 1,2,3 Syrup dosage form. METHOD: The specific method is accomplished using an Acquity UPLC HSS T3 C18 column (2.1 mm × 100 mm), 1.8 µm particle size with pore size 100 Å, utilizing a mixture of purified water-methanol-trifluoroacetic acid (72.5:27.5:1.5, v/v) as the mobile phase at a flow rate of 0.3 mL/min. The column void volume is 1.15 min. UPLC detection is adjusted at 205 nm using a photodiode array detector. RESULTS: Calibration curves are obtained in the linearity ranges: 25-500 µg/mL for paracetamol, 10-50 µg/mL for pseudoephedrine, 0.5-5 µg/mL for chlorpheniramine, and 3-30 µg/mL for sodium benzoate with a correlation coefficient > 0.9992. The mean recovery of the developed method is tested and shows good recovery results between 99-101%; selectivity and forced degradation studies are investigated as per the International Council for Harmonisation Guidelines and no interference is detected due to degradation peaks. CONCLUSION: The proposed stability-indicating UPLC method for simultaneous determination of the three drugs, paracetamol, pseudoephedrine, and chlorpheniramine, with a preservative sodium benzoate in (Cold-Flu) 1,2,3 Syrup dosage form is successfully accomplished, developed, and validated, and can be easily used in the analysis of drugs in pure or dosage form. HIGHLIGHTS: The novelty of the current research work lies in the development of the UPLC method for simultaneous determination of a quaternary mixture of paracetamol, pseudoephedrine, chlorpheniramine, and sodium benzoate in (Cold-Flu) 1,2,3 Syrup dosage form.

Quantification of chlorpheniramine maleate enantiomers by ultraviolet spectroscopy and chemometric methods.

Chlorpheniramine maleate (CLOR) enantiomers were quantified by ultraviolet spectroscopy and partial least squares regression. The CLOR enantiomers were prepared as inclusion complexes with beta-cyclodextrin and 1-butanol with mole fractions in the range from 50 to 100%. For the multivariate calibration the outliers were detected and excluded and variable selection was performed by interval partial least squares and a genetic algorithm. Figures of merit showed results for accuracy of 3.63 and 2.83% (S)-CLOR for root mean square errors of calibration and prediction, respectively. The ellipse confidence region included the point for the intercept and the slope of 1 and 0, respectively. Precision and analytical sensitivity were 0.57 and 0.50% (S)-CLOR, respectively. The sensitivity, selectivity, adjustment, and signal-to-noise ratio were also determined. The model was validated by a paired t test with the results obtained by high-performance liquid chromatography proposed by the European pharmacopoeia and circular dichroism spectroscopy. The results showed there was no significant difference between the methods at the 95% confidence level, indicating that the proposed method can be used as an alternative to standard procedures for chiral analysis.

A porous graphitized carbon column HPLC method for the quantification of paracetamol, pseudoephedrine, and chlorpheniramine in a pharmaceutical formulation.

A simple, rapid, and stability-indicating HPLC method has been developed, fully validated, and applied to the quantification of paracetamol, pseudoephedrine hydrochloride, and chlorpheniramine maleate in a pharmaceutical formulation, using hydrochlorothiazide as an internal standard. Chromatographic separation was achieved isocratically on an RP porous graphitized carbon analytical column (125 x 2.1 mm id, particle size 5 microm) using 5.0 mM ammonium acetate-acetonitrile (35 + 65, v/v) mobile phase at a flow rate of 0.50 mL/min. UV spectrophotometric detection at 220 nm was used. The method had linear calibration curves over the range of 30-70 microg/mL for paracetamol, 1.8-4.2 microg/mL for pseudoephedrine hydrochloride, and 120-280 ng/mL for chlorpheniramine maleate. The intraday and interday RSD values were less than 3.2% for all compounds, while the relative error was less than 2.9%. Accelerated stability studies performed under various stress conditions proved the selectivity of the method. The developed method was applied successfully to QC and content uniformity tests of commercial tablets.

Facile electrochemical preparation of overoxidizedpolypyrrole/RGO composite for ds-DNA immobilization: a novel signal amplified sensing platform for electrochemical determination of chlorpheniramine.

BACKGROUND: Chlorpheniramine (CPA), thanks to its relatively lower side effects, is a widely prescribed medicine for alleviating allergic symptoms as well as some medical emergencies. Owning to this extensive use, many efforts have been directed to measure chlorpheniramine both in vivo and in vitro. High performance liquid chromatography (HPLC), both normal and reverse phase, as well as spectrochemical and electrochemical methods are analytical approaches which have been extensively exploited for determination of CPA. Among them, electrochemical techniques have found elegant place for analysis of CPA due to simplicity, sensitivity and ease of instrumentation. METHODS: Herein, we have reported the preparation and characterization of a biosensor by immobilization of double-stranded DNA on the surface of overoxidizedpolypyrrole-reduced graphene oxide modified pencil graphite electrode (ds-DNA-PPyox/RGO/PGE) as well as its novel usability in measurement of chlorpheniramine (CPA). Scanning electron microscopy (SEM), electrochemical impedance spectroscopy (EIS), UV-Vis spectroscopy and differential pulse voltammetry (DPV) were exploited in order to characterize and evaluate the performance of the proposed biosensor. RESULTS: Final results showed that proposed strategy for modification of PGE introduces an ultra-sensitive biosensor for CPA which offers the best detection limitamong all previously reported electrochemical sensors for CPA. Taking advantage of this biosensor for determination of CPA, a wide linear dynamic range from 0.05 to 200 µM, and a low limit of detection 0.023 µM were obtained by using DPV method. Usability of this biosensor was also confirmed by determination of CPA in tablet and spiked urine samples. CONCLUSIONS: Overoxidized polypyrrole-reduced graphene oxide offered a suitable substrate for immobilization of ds-DNA by which a new biosensor for determination of CPA was fabricated. Proposed biosensor can successfully be used for determination of CPA in urine samples taking advantage of electroanalytical methods. Graphical abstract.

Safety and robustness of coated pellets: self-healing film properties and storage stability.

PURPOSE: Aim of the study was to verify the safety of chlorpheniramine maleate pellets, coated with blends of poly(vinyl acetate) and poly(vinyl alcohol)-poly(ethylene glycol) graft copolymer. Therefore, the impact of mechanical forces and storage conditions on the drug release was investigated. RESULTS: Similar release profiles before and after compression of the pellets to tablets underlined the high film robustness. A damage of the film coat with a razor blade resulted in a premature release, but without a burst. After a similar damage with a needle, the release profile remained almost unchanged, which indicated a swelling based self repair mechanism of the film. Additional studies were dedicated to the storage stability at three different conditions. A slightly delayed release was obtained after 6 months storage at 25 degrees C and a marginally accelerated release was measured after storage at elevated temperatures. No drug migration into the coating layer was detected during storage by confocal Raman microscopy. (1)H-NMR analysis during storage demonstrated, that no polymer or drug degradation had occurred and the plasticizer concentration remained constant. CONCLUSION: The polyvinyl based coating blend for modified release pellets demonstrated a high safety, due to their high robustness and compressibility as well as their satisfying storage stability.

Chemiluminescence determination of chlorpheniramine using tris(1,10-phenanthroline)-ruthenium(II) peroxydisulphate system and sequential injection analysis.

A sequential injection (SI) method was developed for the determination of chlorpheniramine (CPA), based on the reaction of this drug with tris(1,10-phenanthroline)-ruthenium(II) [Ru(phen)(3)(2+)] and peroxydisulphate (S(2)O(8)(2-)) in the presence of light. The instrumental set-up utilized a syringe pump and a multiposition valve to aspirate the reagents [Ru(phen)(3)(2+) and S(2)O(8)(2-)] and a peristaltic pump to propel the sample. The experimental conditions affecting the chemiluminescence reaction were systematically optimized, using the univariate approach. Under the optimum conditions linear calibration curves of 0.1-10 microg/ml were obtained. The detection limit was 0.04 microg/ml and the relative standard deviation (RSD) was always < 5%. The procedure was applied to the analysis of CPA in pharmaceutical products and was found to be free from interferences from concomitants usually present in these preparations.

Toxicological screening and DNA sequencing detects contamination and adulteration in regulated herbal medicines and supplements for diet, weight loss and cardiovascular health.

Use of herbal medicines and supplements by consumers to prevent or treat disease, particularly chronic conditions continues to grow, leading to increased awareness of the minimal regulation standards in many countries. Fraudulent, adulterated and contaminated herbal and traditional medicines and dietary supplements are a risk to consumer health, with adverse effects and events including overdose, drug-herb interactions and hospitalisation. The scope of the risk has been difficult to determine, prompting calls for new approaches, such as the combination of DNA metabarcoding and mass spectrometry used in this study. Here we show that nearly 50% of products tested had contamination issues, in terms of DNA, chemical composition or both. Two samples were clear cases of pharmaceutical adulteration, including a combination of paracetamol and chlorpheniramine in one product and trace amounts of buclizine, a drug no longer in use in Australia, in another. Other issues include the undeclared presence of stimulants such as caffeine, synephrine or ephedrine. DNA data highlighted potential allergy concerns (nuts, wheat), presence of potential toxins (Neem oil) and animal ingredients (reindeer, frog, shrew), and possible substitution of bird cartilage in place of shark. Only 21% of the tested products were able to have at least one ingredient corroborated by DNA sequencing. This study demonstrates that, despite current monitoring approaches, contaminated and adulterated products are still reaching the consumer. We suggest that a better solution is stronger pre-market evaluation, using techniques such as that outlined in this study.

Simultaneous Quantification of Chlorpheniramine, Phenylephrine, Guaifenesin in Presence of Preservatives with Detection of Related Substance Guaiacol in their Cough Syrup by RP-HPLC and TLC-Densitometric Methods.

Two sensitive chromatographic methods have been developed, and validated for chlorpheniramine maleate (CM), phenylephrine (PE) and guaifenesin (GF) determination in their mixture and in presence of GF related substance guaiacol (GL) and preservative namely; sodium benzoate (NaB). The first method was based on thin layer chromatographic separation (TLC) followed by densitometric determination of the separated spots. The separation was achieved using silica gel 60 F254 TLC plates and ethyl acetate: methanol: toluene: ammonia (7:1.5:1:0.5, by volume) as a developing system. Densitometric quantification of the three drugs was carried by the reflectance mode at 270 nm. The second method was based on the use of high-performance liquid chromatography with diode array detection, by which the proposed components were separated on a reversed phase C18 analytical column using phosphate buffer pH 2.9 (containing 0.1 g Heptane-1-sulphonic acid sodium salt) and acetonitrile (85:15, v/v) at 0.8 mL/min for 4 minutes then 1 mL/min till end of the run using flow rate online switching technique. Both methods were validated according to the ICH guidelines and successfully applied for the determination of CM, PE, and GF in pure powder and in combined cough syrup without interference from the excipients.

Online concentration by head-column field-amplified with large-volume sample stacking using flow injection-capillary electrophoresis for the analysis of four active components in cold medicines.

A simple, effective, and sensitive online concentration method for the detection of dextromethorphan hydrobromide (Dex), chlorphenamine hydrogen maleate (Chl), pseudoephedrine hydrochloride (Pse) and paracetamol (Par) based on flow injection-capillary electrophoresis (FI-CE) analysis with head-column field-amplified sample stacking and large-volume sample stacking was developed. The background electrolyte (BGE) was a solution composed of 55 mM borate-15% (v/v) acetonitrile (ACN) (pH 9.3). The sample was injected electrokinetically between plugs of water. Under the optimum conditions, about a 30-fold improvement in the concentration sensitivity relative to normal CE methods was achieved, giving low limits of detection (LOD) of 1.94 x 10(-5), 0.64 x 10(-5), 1.16 x 10(-5) and 2.84 x 10(-5) mg/mL for Dex, Chl, Pse and Par, respectively. The repeatability (defined as RSD) was 1.01, 1.91, 0.89 and 0.92% with the peak-area evaluation and 1.94, 3.98, 2.66 and 3.27% with the peak-height evaluation for Dex, Chl, Pse and Par, respectively. This method has been successfully applied to the analysis of commercial pharmaceutical preparations containing Dex, Chl, Pse and Par.