In Vivo and in Vitro activity of colistin-conjugated bimetallic silver-copper oxide nanoparticles against Pandrug-resistant Pseudomonas aeruginosa.

BACKGROUND: Addressing microbial resistance urgently calls for alternative treatment options. This study investigates the impact of a bimetallic formulation containing colistin, silver, and copper oxide on a pandrug-resistant, highly virulent Pseudomonas aeruginosa (P. aeruginosa) isolate from a cancer patient at the National Cancer Institute, Cairo University, Egypt. METHODS: Silver nanoparticles (Ag NPs), copper oxide nanoparticles (CuO NPs), and bimetallic silver-copper oxide nanoparticles (Ag-CuO NPs) were synthesized using gamma rays, combined with colistin (Col), and characterized by various analytical methods. The antimicrobial activity of Col-Ag NPs, Col-CuO NPs, and bimetallic Col-Ag-CuO NPs against P. aeruginosa was evaluated using the agar well diffusion method, and their minimum inhibitory concentration (MIC) was determined using broth microdilution. Virulence factors such as pyocyanin production, swarming motility, and biofilm formation were assessed before and after treatment with bimetallic Col-Ag-CuO NPs. The in vivo efficacy was evaluated using the Galleria mellonella model, and antibacterial mechanism were examined through membrane leakage assay. RESULTS: The optimal synthesis of Ag NPs occurred at a gamma ray dose of 15.0 kGy, with the highest optical density (OD) of 2.4 at 375 nm. Similarly, CuO NPs had an optimal dose of 15.0 kGy, with an OD of 1.5 at 330 nm. Bimetallic Ag-CuO NPs were most potent at 15.0 kGy, yielding an OD of 1.9 at 425 nm. The MIC of colistin was significantly reduced when combined with nanoparticles: 8 µg/mL for colistin alone, 0.046 µg/mL for Col-Ag NPs, and 0.0117 µg/mL for Col-Ag-CuO NPs. Bimetallic Col-Ag-CuO NPs reduced the MIC four-fold compared to Col-Ag NPs. Increasing the sub-inhibitory concentration of bimetallic nanoparticles from 0.29 × 10-2 to 0.58 × 10-2 µg/mL reduced P. aeruginosa swarming by 32-64% and twitching motility by 34-97%. At these concentrations, pyocyanin production decreased by 39-58%, and biofilm formation was inhibited by 33-48%. The nanoparticles were non-toxic to Galleria mellonella, showing 100% survival by day 3, similar to the saline-treated group. CONCLUSIONS: The synthesis of bimetallic Ag-CuO NPs conjugated with colistin presents a promising alternative treatment for combating the challenging P. aeruginosa pathogen in hospital settings. Further research is needed to explore and elucidate the mechanisms underlying the inhibitory effects of colistin-bimetallic Ag-CuO NPs on microbial persistence and dissemination.

EptA of Riemerella anatipestifer mediates phenotypes involved in colistin resistance and virulence.

Colistin (polymyxin E) is a group of cationic antimicrobial cyclic peptides and is recognized as a last-resort defense against lethal infections with carbapenem-resistant pathogens. In addition to the plasmid-borne mobilized phosphoethanolamine (PEA) transferases, the functional expression of lipid A-modifying enzymes encoded on chromosomes has been attributed to intrinsic bacterial colistin resistance. However, the mechanisms of colistin resistance in Riemerella anatipestifer remain unknown. Herein, the GE296_RS09715 gene-encoded Lipid A PEA transferases (RaEptA) was identified in R. anatipestifer. Genetic and structural analyses revealed that the amino acid sequence of RaEptA shared 26.6%-33.1% similarities with the family of Lipid A PEA transferases (EptA) and MCR-like proteins and have defined 12 residues that contribute to the formation of phosphatidylethanolamine (PE)-recognizable cavities. Comparative analyses of colistin resistance in RA-LZ01 and RA-LZ01ΔRaEptA showed the level of colistin has fallen from 96 µg mL-1 down to 24 ~ 32 µg mL-1 . Site-directed mutagenesis assay of the PE-binding cavity and expression of the mutants reveals that K309-rRaEptA can remodel the surface of Escherichia coli and rendering it resistant to colistin, suggesting this point-mutation of P309K is necessary for EptA-mediated lipid A modification. Moreover, the virulence of RA-LZ01ΔRaEptA was attenuated compared with RA-LZ01 both in vivo and vitro. Taken together, the results represent the RaEptA involved in the colistin resistance and pathogenicity, and the P309K mutation might alter bacterial adaptation and increase the spread of colistin resistance from R. anatipestifer to other gram-negative bacteria. The findings of this study suggest another scenario for the spread of colistin resistance genes and should be considered by a wide audience.

Crafting Stable Antibiotic Nanoparticles via Complex Coacervation of Colistin with Block Copolymers.

To combat the ever-growing increase of multidrug-resistant (MDR) bacteria, action must be taken in the development of antibiotic formulations. Colistin, an effective antibiotic, was found to be nephrotoxic and neurotoxic, consequently leading to a ban on its use in the 1980s. A decade later, colistin use was revived and nowadays used as a last-resort treatment against Gram-negative bacterial infections, although highly regulated. If cytotoxicity issues can be resolved, colistin could be an effective option to combat MDR bacteria. Herein, we investigate the complexation of colistin with poly(ethylene oxide)-b-poly(methacrylic acid) (PEO-b-PMAA) block copolymers to form complex coacervate core micelles (C3Ms) to ultimately improve colistin use in therapeutics while maintaining its effectiveness. We show that well-defined and stable micelles can be formed in which the cationic colistin and anionic PMAA form the core while PEO forms a protecting shell. The resulting C3Ms are in a kinetically arrested and stable state, yet they can be made reproducibly using an appropriate experimental protocol. By characterization through dynamic light scattering (DLS) and small-angle X-ray scattering (SAXS), we found that the best C3M formulation, based on long-term stability and complexation efficiency, is at charge-matching conditions. This nanoparticle formulation was compared to noncomplexed colistin on its antimicrobial properties, enzymatic degradation, serum protein binding, and cytotoxicity. The studies indicate that the antimicrobial properties and cytotoxicity of the colistin-C3Ms were maintained while protein binding was limited, and enzymatic degradation decreased after complexation. Since colistin-C3Ms were found to have an equal effectivity but with increased cargo protection, such nanoparticles are promising components for the antibiotic formulation toolbox.

Practical synthesis of isoindolines yields potent colistin potentiators for multidrug-resistant Acinetobacter baumannii.

An efficient and practical one-pot synthesis of isoindolines from readily available starting materials was achieved under mild conditions by implementing an isoindole umpolung strategy. A variety of isoindolines were prepared with good to excellent yields. Biological screens of these identified compounds demonstrated that they are potent potentiators of colistin for multi-drug resistant Acinetobacter baumannii.

Enhancement by pyrazolones of colistin efficacy against mcr-1-expressing E. coli: an in silico and in vitro investigation.

Owing to the emergence of antibiotic resistance, the polymyxin colistin has been recently revived to treat acute, multidrug-resistant Gram-negative bacterial infections. Positively charged colistin binds to negatively charged lipids and damages the outer membrane of Gram-negative bacteria. However, the MCR-1 protein, encoded by the mobile colistin resistance (mcr) gene, is involved in bacterial colistin resistance by catalysing phosphoethanolamine (PEA) transfer onto lipid A, neutralising its negative charge, and thereby reducing its interaction with colistin. Our preliminary results showed that treatment with a reference pyrazolone compound significantly reduced colistin minimal inhibitory concentrations in Escherichia coli expressing mcr-1 mediated colistin resistance (Hanpaibool et al. in ACS Omega, 2023). A docking-MD combination was used in an ensemble-based docking approach to identify further pyrazolone compounds as candidate MCR-1 inhibitors. Docking simulations revealed that 13/28 of the pyrazolone compounds tested are predicted to have lower binding free energies than the reference compound. Four of these were chosen for in vitro testing, with the results demonstrating that all the compounds tested could lower colistin MICs in an E. coli strain carrying the mcr-1 gene. Docking of pyrazolones into the MCR-1 active site reveals residues that are implicated in ligand-protein interactions, particularly E246, T285, H395, H466, and H478, which are located in the MCR-1 active site and which participate in interactions with MCR-1 in ≥ 8/10 of the lowest energy complexes. This study establishes pyrazolone-induced colistin susceptibility in E. coli carrying the mcr-1 gene, providing a method for the development of novel treatments against colistin-resistant bacteria.

Improved Aerosolization Stability of Inhalable Tobramycin Powder Formulation by Co-Spray Drying with Colistin.

PURPOSE: Tobramycin shows synergistic antibacterial activity with colistin and can reduce the toxic effects of colistin. The purpose of this study is to prepare pulmonary powder formulations containing both colistin and tobramycin and to assess their in vitro aerosol performance and storage stability. METHODS: The dry powder formulations were manufactured using a lab-scale spray dryer. In vitro aerosol performance was measured using a Next Generation Impactor. The storage stability of the dry powder formulations was measured at 22°C and two relative humidity levels - 20 and 55%. Colistin composition on the particle surface was measured using X-ray photoelectron spectroscopy. RESULTS: Two combination formulations, with 1:1 and 1:5 molar ratios of colistin and tobramycin, showed fine particle fractions (FPF) of 85%, which was significantly higher than that of the spray dried tobramycin (45%). FPF of the tobramycin formulation increased significantly when stored for four weeks at both 20% and 55% RH. In contrast, FPF values of both combination formulations and spray dried colistin remained stable at both humidity levels. Particle surface of each combination was significantly enriched in colistin molecules; 1:5 combination showed 77% by wt. colistin. CONCLUSIONS: The superior aerosol performance and aerosolization stability of 1:1 and 1:5 combination formulations of colistin and tobramycin could be attributed to enrichment of colistin on the co-spray dried particle surface. The observed powder properties may be the result of a surfactant-like assembly of these colistin molecules during spray drying, thus forming a hydrophobic particle surface.

Effects of Different Component Contents of Colistin Methanesulfonate on the Pharmacokinetics of Prodrug and Formed Colistin in Human.

PURPOSES: To evaluate the effects of component contents in different colistin methanesulfonate (CMS) formulas on their clinical pharmacokinetics of the prodrug CMS and the formed colistin. METHODS: Two CMS formulas (CTTQ and Parkedale) were investigated in a single dose, randomized, open-label, crossover study conducted in 18 healthy Chinese subjects. Both CMS formulas met the requirements of European Pharmacopoeia 9.2 with 12.1% difference in the two major active components (CMS A and CMS B). The PK parameters after a single intravenous infusion of CMS at 2.5 mg/kg were calculated and the steady-state plasma colistin concentrations (Css,avg) following multiple dosing, once every 12 h for 7 days, were simulated with the non-compartment model. RESULTS: The systemic exposure (AUC0-inf) of CMS were 59.49 ± 5.90 h·µg/mL and 51.09 ± 4.70 h·µg/mL, and the AUC0-inf of colistin were 15.39 ± 2.63 h·µg/mL and 12.36 ± 2.10 h·µg/mL for CTTQ and Parkedale, respectively. The ratios (90% CI) of geometric mean of AUC0-inf of CTTQ to Parkedale were 116.38% (112.95%, 119.91%) and 124.49% (120.76%, 128.35%) for CMS and colistin, respectively. The predicted Css,avg (95% CI) were 0.92 (0.85, 0.99) µg/mL and 0.74 (0.69, 0.79) µg/mL for CTTQ and Parkedale, respectively. CONCLUSION: The difference in component content in the two CMS formulas had a significant (P < 0.001) impact on the systemic exposure of colistin in human, thus, warranted essential considerations in clinical applications.

Colistin Resistance in Aeromonas spp.

The increase in the use of antimicrobials such as colistin for the treatment of infectious diseases has led to the appearance of Aeromonas strains resistant to this drug. However, resistance to colistin not only occurs in the clinical area but has also been determined in Aeromonas isolates from the environment or animals, which has been determined by the detection of mcr genes that confer a resistance mechanism to colistin. The variants mcr-1, mcr-3, and mcr-5 have been detected in the genus Aeromonas in animal, environmental, and human fluids samples. In this article, an overview of the resistance to colistin in Aeromonas is shown, as well as the generalities of this molecule and the recommended methods to determine colistin resistance to be used in some of the genus Aeromonas.

Selective Bacterial Targeting and Infection-Triggered Release of Antibiotic Colistin Conjugates.

In order to render potent, but toxic antibiotics more selective, we have explored a novel conjugation strategy that includes drug accumulation followed by infection-triggered release of the drug. Bacterial targeting was achieved using a modified fragment of the human antimicrobial peptide ubiquicidin, as demonstrated by fluorophore-tagged variants. To limit the release of the effector colistin only to infection-related situations, we introduced a linker that was cleaved by neutrophil elastase (NE), an enzyme secreted by neutrophil granulocytes at infection sites. The linker carried an optimized sequence of amino acids that was required to assure sufficient cleavage efficiency. The antibacterial activity of five regioisomeric conjugates prepared by total synthesis was masked, but was released upon exposure to recombinant NE when the linker was attached to amino acids at the 1- or the 3-position of colistin. A proof-of-concept was achieved in co-cultures of primary human neutrophils and Escherichia coli that induced the secretion of NE, the release of free colistin, and an antibacterial efficacy that was equal to that of free colistin.

Lysin LysMK34 of Acinetobacter baumannii Bacteriophage PMK34 Has a Turgor Pressure-Dependent Intrinsic Antibacterial Activity and Reverts Colistin Resistance.

The prevalence of extensively and pandrug-resistant strains of Acinetobacter baumannii leaves little or no therapeutic options for treatment for this bacterial pathogen. Bacteriophages and their lysins represent attractive alternative antibacterial strategies in this regard. We used the extensively drug-resistant A. baumannii strain MK34 to isolate the bacteriophage PMK34 (vB_AbaP_PMK34). This phage shows fast adsorption and lacks virulence genes; nonetheless, its narrow host spectrum based on capsule recognition limits broad application. PMK34 is a Fri1virus member of the Autographiviridae and has a 41.8-kb genome (50 open reading frames), encoding an endolysin (LysMK34) with potent muralytic activity (1,499.9 ± 131 U/µM), a typical mesophilic thermal stability up to 55°C, and a broad pH activity range (4 to 10). LysMK34 has an intrinsic antibacterial activity up to 4.8 and 2.4 log units for A. baumannii and Pseudomonas aeruginosa strains, respectively, but only when a high turgor pressure is present. The addition of 0.5 mM EDTA or application of an osmotic shock after treatment can compensate for the lack of a high turgor pressure. The combination of LysMK34 and colistin results in up to 32-fold reduction of the MIC of colistin, and colistin-resistant strains are resensitized in both Mueller-Hinton broth and 50% human serum. As such, LysMK34 may be used to safeguard the applicability of colistin as a last-resort antibiotic.IMPORTANCEA. baumannii is one of the most challenging pathogens for which development of new and effective antimicrobials is urgently needed. Colistin is a last-resort antibiotic, and even colistin-resistant A. baumannii strains exist. Here, we present a lysin that sensitizes A. baumannii for colistin and can revert colistin resistance to colistin susceptibility. The lysin also shows a strong, turgor pressure-dependent intrinsic antibacterial activity, providing new insights in the mode of action of lysins with intrinsic activity against Gram-negative bacteria.

Inhalable Nanocomposite Microparticles with Enhanced Dissolution and Superior Aerosol Performance.

Previous studies have shown that combining colistin (Col), a cationic polypeptide antibiotic, with ivacaftor (Iva), a cystic fibrosis (CF) drug, could achieve synergistic antibacterial effects against Pseudomonas aeruginosa. The purpose of this study was to develop dry powder inhaler formulations for co-delivery of Col and Iva, aiming to treat CF and lung infection simultaneously. In order to improve solubility and dissolution for the water-insoluble Iva, Iva was encapsulated into bovine serum albumin (BSA) nanoparticles (Iva-BSA-NPs). Inhalable composite microparticles of Iva-BSA-NPs were produced by spray-freeze-drying using water-soluble Col as the matrix material and l-leucine as an aerosol enhancer. The optimal formulation showed an irregularly shaped morphology with fine particle fraction (FPF) values of 73.8 ± 5.2% for Col and 80.9 ± 4.1% for Iva. Correlations between "D×ρtapped" and FPF were established for both Iva and Col. The amorphous solubility of Iva is 66 times higher than the crystalline solubility in the buffer. Iva-BSA-NPs were amorphous and remained in the amorphous state after spray-freeze-drying, as examined by powder X-ray diffraction. In vitro dissolution profiles of the selected DPI formulation indicated that Col and Iva were almost completely released within 3 h, which was substantially faster regarding Iva release than the jet-milled physical mixture of the two drugs. In summary, this study developed a novel inhalable nanocomposite microparticle using a synergistic water-soluble drug as the matrix material, which achieved reduced use of excipients for high-dose medications, improved dissolution rate for the water-insoluble drug, and superior aerosol performance.

Recent progress on elucidating the molecular mechanism of plasmid-mediated colistin resistance and drug design.

Antibiotic resistance is a growing global challenge to public health. Polymyxin is considered to be the last-resort antibiotic against most gram-negative bacteria. Recently, discoveries of a plasmid-mediated, transferable mobilized polymyxin resistance gene (mcr-1) in many countries have heralded the increased threat of the imminent emergence of pan-drug-resistant super bacteria. MCR-1 is an inner membrane protein that enables bacteria to develop resistance to polymyxin by transferring phosphoethanolamine to lipid A. However, the mechanism associated with polymyxin resistance has yet to be elucidated, and few drugs exist to address this issue. Here, we review our current understanding regarding MCR-1 and small molecule inhibitors to provide a detailed enzymatic mechanism of MCR-1 and the associated implications for drug design.

Surface Composition and Aerosolization Stability of an Inhalable Combinational Powder Formulation Spray Dried Using a Three-Fluid Nozzle.

PURPOSE: This study aims to understand the impact of spray drying nozzles on particle surface composition and aerosol stability. METHODS: The combination formulations of colistin and azithromycin were formulated by 2-fluid nozzle (2 N) or 3-fluid (3 N) spray drying in a molar ratio of 1:1. A 3-factor, 2-level (23) factorial design was selected to investigate effects of flow rate, inlet temperature and feed concentration on yield of spray drying and the performance of the spray dried formulations for the 3 N. RESULTS: FPF values for the 2 N formulation (72.9 ± 1.9% for azithromycin & 73.4 ± 0.8% for colistin) were higher than those for the 3 N formulation (56.5 ± 3.8% for azithromycin & 55.1 ± 1.6% for colistin) when stored at 20% RH for 1 day, which could be attributed to smaller physical size for the 2 N. There was no change in FPF for both drugs in the 2 N formulation after storage at 75% RH for 90 days; however, there was a slight increase in FPF for colistin in the 3 N formulation at the same storage conditions. Surface enrichment of hydrophobic azithromycin was measured by X-ray photoelectron spectroscopy for both 2 N and 3 N formulations and interactions were studied using FTIR. CONCLUSIONS: The 3-fluid nozzle provides flexibility in choosing different solvents and has the capability to spray dry at higher feed solid concentrations. This study highlights the impact of hydrophobic azithromycin enrichment on particle surface irrespective of the nozzle type, on the prevention of moisture-induced deterioration of FPF for hygroscopic colistin.

Generation of a novel human dermal substitute functionalized with antibiotic-loaded nanostructured lipid carriers (NLCs) with antimicrobial properties for tissue engineering.

BACKGROUND: Treatment of patients affected by severe burns is challenging, especially due to the high risk of Pseudomonas infection. In the present work, we have generated a novel model of bioartificial human dermis substitute by tissue engineering to treat infected wounds using fibrin-agarose biomaterials functionalized with nanostructured lipid carriers (NLCs) loaded with two anti-Pseudomonas antibiotics: sodium colistimethate (SCM) and amikacin (AMK). RESULTS: Results show that the novel tissue-like substitutes have strong antibacterial effect on Pseudomonas cultures, directly proportional to the NLC concentration. Free DNA quantification, WST-1 and Caspase 7 immunohistochemical assays in the functionalized dermis substitute demonstrated that neither cell viability nor cell proliferation were affected by functionalization in most study groups. Furthermore, immunohistochemistry for PCNA and KI67 and histochemistry for collagen and proteoglycans revealed that cells proliferated and were metabolically active in the functionalized tissue with no differences with controls. When functionalized tissues were biomechanically characterized, we found that NLCs were able to improve some of the major biomechanical properties of these artificial tissues, although this strongly depended on the type and concentration of NLCs. CONCLUSIONS: These results suggest that functionalization of fibrin-agarose human dermal substitutes with antibiotic-loaded NLCs is able to improve the antibacterial and biomechanical properties of these substitutes with no detectable side effects. This opens the door to future clinical use of functionalized tissues.

In vitro and in vivo antimicrobial activity of sodium colistimethate and amikacin-loaded nanostructured lipid carriers (NLC).

Sodium colistimethate (SCM) and amikacin (AMK) are among the few antibiotics effective against resistant P. aeruginosa, K. pneumoniae and A. baumannii; however, their toxicity severely limits their use. Enclosing antibiotics into nanostructured lipid carriers (NLC) might decrease drug toxicity and improve antibiotic disposition. In this work, SCM or AMK was loaded into different NLC formulations, through high pressure homogenization, and their in vitro and in vivo effectiveness was analyzed. The encapsulation process did not reduce drug effectiveness since in vitro SCM-NLC and AMK-NLC drug activity was equal to that of the free drugs. As cryoprotectant, trehalose showed better properties than dextran. Instead, positive chitosan coating was discarded due to its limited cost-efficiency. Finally, the in vivo study in acute pneumonia model revealed that intraperitoneal administration was superior to the intramuscular route and confirmed that (-) SCM-NLC with trehalose, was the most suitable formulation against an extensively drug-resistant A. baumannii strain.

Comparison of two therapeutic approaches for the management of ventilator-associated pneumonia due to multidrug-resistant Acinetobacter: a randomized clinical trial study.

Management of ventilator-associated pneumonia (VAP) is a puzzling issue for infectious disease specialist. The present clinical trial study was aimed to comparing the effects of injectable colistin plus nebulized colistin and injectable colistin plus nebulized tobramycin on management of patients with VAP due to multidrug-resistant Acinetobacter. VAP patients were randomly divided into two groups (n = 30/each): Group 1 - patients that received intravenous (IV) meropenem, injectable colistin plus nebulized colistin, as a routine treatment, and Group 2 - patients that received IV meropenem, injectable colistin plus nebulized tobramycin. A total of 14 days of therapeutic intervention are required for every case. Follow-up for subjects was performed at five time-points: days 1, 3, 5, 7, and 14 after intervention. Also, a mean of creatinine levels of patients was determined in five times. In the present study, the clinical pulmonary infection score (CPIS) was determined on the basis of points assigned for various clinically manifestations of VAP. Based on our statistical analysis, there was no significant difference between CPIS and creatinine level in both Groups 1 and 2 (p > .05). CPIS and other clinical investigation appeared effectiveness of the treatment with injected colistin plus nebulized tobramycin; on the other hand, the results of present clinical trial showed that aforementioned therapeutic approach can be used as an alternative treatment for the management of infection in VAP patients.

Determination of Polypeptide Antibiotic Residues in Food of Animal Origin by Ultra-High-Performance Liquid Chromatography-Tandem Mass Spectrometry.

A novel UHPLC-MS/MS method for the determination of polypeptide antibiotic residues in animal muscle, milk, and eggs was developed and validated. Bacitracin A, colistin A, colistin B, polymyxin B1, and polymyxin B2 were extracted from the samples with a mixture of acetonitrile/water/ammonia solution 25%, 80/10/10 (v/v/v), and put through further evaporation, reconstitution, and filtration steps. The chromatographic separation was performed on a C18 column in gradient elution mode. Mass spectral acquisitions were performed in selective multiple reaction monitoring mode by a triple quadrupole mass spectrometer. The method was validated according to the criteria of Commission Decision 2002/657/EC. The method quantifies polypeptides in a linear range from 10 to 1000 µg kg-1, where the lowest concentration on the calibration curve refers to the limit of quantification (LOQ). The recoveries ranged from 70 to 99%, the repeatability was below 13%, and within-laboratory reproducibility was lower than 15%. The decision limit (CCα) and detection capability (CCß) values were calculated, and ruggedness and stability studies were performed, to fulfill the criteria for confirmatory methods. Moreover, the developed method may also be used for screening purposes by its labor efficiency.

Effects of Microplate Type and Broth Additives on Microdilution MIC Susceptibility Assays.

The determination of antibiotic potency against bacterial strains by assessment of their minimum inhibitory concentration normally uses a standardized broth microdilution assay procedure developed more than 50 years ago. However, certain antibiotics require modified assay conditions in order to observe optimal activity. For example, daptomycin requires medium supplemented with Ca2+, and the lipoglycopeptides dalbavancin and oritavancin require Tween 80 to be added to the growth medium to prevent the depletion of free drug via adsorption to the plastic microplate. In this report, we examine systematically the effects of several different plate types on microdilution broth MIC values for a set of antibiotics against Gram-positive and Gram-negative bacteria, both in medium alone and in medium supplemented with the commonly used additives Tween 80, lysed horse blood, and 50% human serum. We observed very significant differences in measured MICs (up to 100-fold) for some lipophilic antibiotics, such as the Gram-positive lipoglycopeptide dalbavancin and the Gram-negative lipopeptide polymyxins, and found that nonspecific binding plates can replace the need for surfactant additives. Microtiter plate types and any additives should be specified when reporting broth dilution MIC values, as results can vary dramatically for some classes of antibiotics.

Substrate analog interaction with MCR-1 offers insight into the rising threat of the plasmid-mediated transferable colistin resistance.

Colistin is considered a last-resort antibiotic against most gram-negative bacteria. Recent discoveries of a plasmid-mediated, transferable mobilized colistin-resistance gene ( mcr-1) on all continents have heralded the imminent emergence of pan-drug-resistant superbacteria. The inner-membrane protein MCR-1 can catalyze the transfer of phosphoethanolamine (PEA) to lipid A, resulting in colistin resistance. However, little is known about the mechanism, and few drugs exist to address this issue. We present crystal structures revealing the MCR-1 catalytic domain (cMCR-1) as a monozinc metalloprotein with ethanolamine (ETA) and d-glucose, respectively, thus highlighting 2 possible substrate-binding pockets in the MCR-1-catalyzed PEA transfer reaction. Mutation of the residues involved in ETA and d-glucose binding impairs colistin resistance in recombinant Escherichia coli containing full-length MCR-1. Partial analogs of the substrate are used for cocrystallization with cMCR-1, providing valuable information about the family of PEA transferases. One of the analogs, ETA, causes clear inhibition of polymyxin B resistance, highlighting its potential for drug development. These data demonstrate the crucial role of the PEA- and lipid A-binding pockets and provide novel insights into the structure-based mechanisms, important drug-target hot spots, and a drug template for further drug development to combat the urgent, rising threat of MCR-1-mediated antibiotic resistance.-Wei, P., Song, G., Shi, M., Zhou, Y., Liu, Y., Lei, J., Chen, P., Yin, L. Substrate analog interaction with MCR-1 offers insight into the rising threat of the plasmid-mediated transferable colistin resistance.

Polymer Masked-Unmasked Protein Therapy: Identification of the Active Species after Amylase Activation of Dextrin-Colistin Conjugates.

Polymer masked-unmasked protein therapy (PUMPT) uses conjugation of a biodegradable polymer, such as dextrin, hyaluronic acid, or poly(l-glutamic acid), to mask a protein or peptide's activity; subsequent locally triggered degradation of the polymer at the target site regenerates bioactivity in a controllable fashion. Although the concept of PUMPT is well established, the relationship between protein unmasking and reinstatement of bioactivity is unclear. Here, we used dextrin-colistin conjugates to study the relationship between the molecular structure (degree of unmasking) and biological activity. Size exclusion chromatography was employed to collect fractions of differentially degraded conjugates and ultraperformance liquid chromatography-mass spectrometry (UPLC-MS) employed to characterize the corresponding structures. Antimicrobial activity was studied using a minimum inhibitory concentration (MIC) assay and confocal laser scanning microscopy of LIVE/DEAD-stained biofilms with COMSTAT analysis. In vitro toxicity of the degraded conjugate was assessed using an 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl tetrazolium bromide assay. UPLC-MS revealed that the fully "unmasked" dextrin-colistin conjugate composed of colistin bound to at least one linker, whereas larger species were composed of colistin with varying lengths of glucose units attached. Increasing the degree of dextrin modification by succinoylation typically led to a greater number of linkers bound to colistin. Greater antimicrobial and antibiofilm activity were observed for the fully "unmasked" conjugate compared to the partially degraded species (MIC = 0.25 and 2-8 µg/mL, respectively), whereas dextrin conjugation reduced colistin's in vitro toxicity toward kidney cells, even after complete unmasking. This study highlights the importance of defining the structure-antimicrobial activity relationship for novel antibiotic derivatives and demonstrates the suitability of LC-MS to aid the design of biodegradable polymer-antibiotic conjugates.