A 3.8-million-year-old hominin cranium from Woranso-Mille, Ethiopia.

The cranial morphology of the earliest known hominins in the genus Australopithecus remains unclear. The oldest species in this genus (Australopithecus anamensis, specimens of which have been dated to 4.2-3.9 million years ago) is known primarily from jaws and teeth, whereas younger species (dated to 3.5-2.0 million years ago) are typically represented by multiple skulls. Here we describe a nearly complete hominin cranium from Woranso-Mille (Ethiopia) that we date to 3.8 million years ago. We assign this cranium to A. anamensis on the basis of the taxonomically and phylogenetically informative morphology of the canine, maxilla and temporal bone. This specimen thus provides the first glimpse of the entire craniofacial morphology of the earliest known members of the genus Australopithecus. We further demonstrate that A. anamensis and Australopithecus afarensis differ more than previously recognized and that these two species overlapped for at least 100,000 years-contradicting the widely accepted hypothesis of anagenesis.

Male mastodon landscape use changed with maturation (late Pleistocene, North America).

Under harsh Pleistocene climates, migration and other forms of seasonally patterned landscape use were likely critical for reproductive success of mastodons (Mammut americanum) and other megafauna. However, little is known about how their geographic ranges and mobility fluctuated seasonally or changed with sexual maturity. We used a spatially explicit movement model that coupled strontium and oxygen isotopes from two serially sampled intervals (5+ adolescent years and 3+ adult years) in a male mastodon tusk to test for changes in landscape use associated with maturation and reproductive phenology. The mastodon's early adolescent home range was geographically restricted, with no evidence of seasonal preferences. Following inferred separation from the matriarchal herd (starting age 12 y), the adolescent male's mobility increased as landscape use expanded away from his natal home range (likely central Indiana). As an adult, the mastodon's monthly movements increased further. Landscape use also became seasonally structured, with some areas, including northeast Indiana, used only during the inferred mastodon mating season (spring/summer). The mastodon died in this area (>150 km from his core, nonsummer range) after sustaining a craniofacial injury consistent with a fatal blow from a competing male's tusk during a battle over access to mates. Northeast Indiana was likely a preferred mating area for this individual and may have been regionally significant for late Pleistocene mastodons. Similarities between mammutids and elephantids in herd structure, tusk dimorphism, tusk function, and the geographic component of male maturation indicate that these traits were likely inherited from a common ancestor.

Age estimation in adults by canine teeth: a systematic review of the Cameriere method with meta-analysis on the reliability of the pulp/tooth area ratio.

The age estimation of an adult using methods accessible to the forensic routine is a goal pursued by forensic experts. Cameriere, Ferrante and Cingolani (2004) proposed the use of the pulp/tooth area ratio of canine teeth as a promising variable, but its reliability has shown conflicting results in the scientific literature. This article aimed to carry out a systematic review with meta-analysis to verify whether the pulp/tooth area ratio of canine teeth includes a variable that can be used alone to estimate dental age in adults. A systematic search was carried out in six databases using keywords related to the theme in Portuguese, English, and Spanish. The study selection process followed pre-established eligibility criteria. Assessments were carried out regarding risk of bias and publication bias of selected studies, and meta-analysis was carried out considering Pearson's correlation coefficient between pulp/tooth area ratio and chronological age as effect measure. Most selected studies showed low risk of bias; no publication bias was found when all studies were considered, and potential publication bias was found when outliers were removed. Despite the high heterogeneity among studies and the need for more research, it could be observed that the pulp/tooth area ratio has strong negative correlation with chronological age, and the pulp/tooth area ratio could be derived from both periapical radiographs and orthopantomographs. Therefore, it is suggested that there is scientific evidence that the pulp/tooth area ratio obtained from canine teeth is reliable for dental age estimation in adults.

Maxillary Canine Impaction: Assessing the Influence of Maxillary Anatomy Using Cone Beam Computed Tomography.

BACKGROUND The purpose of this study was to evaluate the anatomical characteristics of patients with unilateral impacted canine teeth compared to a control group. Cone beam computed tomography (CBCT) records were retrospectively analyzed. MATERIAL AND METHODS CBCT records of 64 patients with unilateral impacted canine teeth (57.8% female and 42.2% male) and 64 controls (59.4% female and 40.6% male) were retrospectively analyzed. On the CBCT images, intermolar width, arch length, arch perimeter, palatal width in the molar region at cementoenamel junction, palatal width in the molar region at the crest, palatal width in the molar region measured from mid-root level, nasal cavity width, and palatal depth were evaluated. RESULTS In the palatal width measurement from the mid-root variable, the measurement of labially positioned canines was significantly lower than the control group (P<0.05). In terms of intermolar width, the labial positioned impacted canines' values were lower than in the control group. There was a significant difference in terms of the perimeter variable and both palatinally and labially positioned impacted canines were significantly lower than in the control group (P<0.05). All parameters were compared according to sex, and measurements of male patients were significantly higher than in female patients (P<0.05). CONCLUSIONS A labially impacted canine was strongly linked to a decrease in mid-root palatal and intermolar widths. Additionally, impacted canines positioned both palatally and labially were found to result in a reduced arch perimeter. Moreover, male patients with impacted canines exhibited notably greater anatomical measurements compared to female patients.

Apical incisor root resorption due to ectopic maxillary canine eruption: Association with time of diagnosis and type of intervention in a retrospective population-based cohort study.

OBJECTIVES: The primary aim was to study upper incisor severe apical root resorption (RR) related to ectopic canine eruption and its association with timing of diagnosis and type of intervention conducted. The secondary aim was to correlate resorption with other dental anomalies. MATERIALS AND METHODS: Digital journals and radiographic material of all ectopic maxillary canines registered in 2012 in the regional public paediatric dental clinics in the Council of Aarhus were inspected retrospectively. Data related to 10 variables were retrieved. Post-treatment radiographs were used for evaluation of incisor RR. RESULTS: A total of 260 ectopic maxillary canines were diagnosed in 2012. The majority were found in the 9-13-year-old age group (0.8% prevalence within the total population). In all, 244 canines were assessed for eligibility and 181 had adequate final radiographs for evaluation of RR. Among ectopic maxillary canines, 9.4% caused severe incisor RR to neighbouring teeth. Timely palpation for canine eruption significantly reduced the odds for upper incisor resorption by 80%. Multiple regression showed that when the permanent canine cannot be palpated and the deciduous has been extracted, delaying the first X-rays was associated with a 38% odds ratio increase for RR for each year of delay after the age of 10 years. No significant associations were found between incisor RR and intervention conducted or other dental anomalies. CONCLUSION: Palpation of erupting maxillary canines is crucial for timely diagnosis of ectopic eruption and initiation of treatment to avoid RR. If the canine cannot be palpated at 10 years of age, radiographic examination is highly recommendable.

Three-dimensional evaluation of secondary alveolar bone grafting in patients with unilateral cleft lip and palate: A 2-3 year post-operative follow-up.

OBJECTIVES: The present study aims to quantitatively assess secondary alveolar bone graft (SABG) resorption in unilateral cleft lip, alveolus and palate (UCLAP) patients in a 2-3 year longitudinal follow-up setting by using a validated 3D protocol. Furthermore, the potential relation of SABG resorption with maxillary canine position and a number of patient-related factors was investigated. METHODS: UCLAP patients who underwent SABG and had good quality CBCT images at the following timepoints were included in the study: pre-operative (T0), immediate (T1), 6 months (T2) and either 1-2 years (T3) or 2-3 years (T4) post-operative. The final bone grafted region was defined on the T1 scans and refined in the registered T0 scans. The bone graft after resorption was determined by applying threshold-based segmentation on the registered T2, T3 or T4 scans within the segmented bone graft volume. The position of the canines was determined at every timepoint at the cleft and non-cleft side. RESULTS: Forty-five UCLAP patients (mean age 9.0 ± 1.3 years) were included. In the first 6 months after SABG, 43.6% bone resorption was recorded. 2-3 years post-operative, 56% bone resorption was found if the maxillary canine was not yet erupted and 42.7% if it erupted through the graft. The vertical position of the canines was significantly higher on the cleft side at T3. CONCLUSIONS: The present study reports significant SABG resorption over time. However, no correlation was found between SABG resorption and canine position, nor between other patient-related factors.

Factors Associated With Successful Surgical Exposure of Impacted Maxillary Canines.

PURPOSE: Impacted maxillary canines occur in up to 3% of the population and their eruption is of great importance in establishing, maintaining the shape, aesthetics, and function of the dental arch. Hence, surgical exposure of canines for the purpose of aligning them is a common surgical procedure. This study identifies the frequency and the statistically significant factors associated with successful surgical exposure of impacted maxillary canines and the relative risk factors for repeat surgery. METHODS: This is a retrospective cohort study of 182 patients who underwent surgical exposure of impacted maxillary canines and orthodontic alignment, over a 5-year period between 2014 and 2018. The variables recorded and analyzed included demographics (age and gender), type of surgery (closed or open exposure), grade of surgeon, and radiographic features on orthopantomogram (canine overlap of adjacent tooth root, vertical canine crown height, canine angulation to midline, position of canine root apex). Outcome data recorded were successful surgical exposure and orthodontic alignment and the need for repeat operation or surgical removal due to ankylosis. The data were analyzed to identify the statistically significant correlates of successful surgical exposure and the relative risk factors associated with repeat surgery. RESULTS: A total of 182 patients and 232 bone-impacted maxillary surgical canine exposures were analyzed, as 50 patients had bilateral impaction. Mean age was 15 years (range = 10-38 years), with 122 (67%) female to 60 (33%) male ratio. Total of 222/232 (96%) impacted maxillary canine teeth were successfully surgically exposed and 10/232 (4%) required re-exposure surgery. Correlates of successful surgical exposures were open exposure technique (P < .002) and reduced distance of vertical canine crown height from alveolar bone margin (P < .033). Relative risk factors for repeat surgery were increased age, male, closed surgical exposure, grade of surgeon, central impaction, increased overlap of adjacent root, increased vertical height, increased angulation to midline, canine apex position above second premolar and procedure done under local anesthetics. CONCLUSIONS: This is the largest impacted maxillary canine study to date which has identified the factors that result in successful surgical exposure, hence allow selection of the patients most suitable for this treatment. Secondly, patients with relative risk factors for repeat surgical intervention may be consented appropriately, triaged for a closer orthodontic follow-up and prioritized for surgery to reduce overall treatment time.

Estimating sexual size dimorphism in fossil species from posterior probability densities.

Accurate characterization of sexual dimorphism is crucial in evolutionary biology because of its significance in understanding present and past adaptations involving reproductive and resource use strategies of species. However, inferring dimorphism in fossil assemblages is difficult, particularly with relatively low dimorphism. Commonly used methods of estimating dimorphism levels in fossils include the mean method, the binomial dimorphism index, and the coefficient of variation method. These methods have been reported to overestimate low levels of dimorphism, which is problematic when investigating issues such as canine size dimorphism in primates and its relation to reproductive strategies. Here, we introduce the posterior density peak (pdPeak) method that utilizes the Bayesian inference to provide posterior probability densities of dimorphism levels and within-sex variance. The highest posterior density point is termed the pdPeak. We investigated performance of the pdPeak method and made comparisons with the above-mentioned conventional methods via 1) computer-generated samples simulating a range of conditions and 2) application to canine crown-diameter datasets of extant known-sex anthropoids. Results showed that the pdPeak method is capable of unbiased estimates in a broader range of dimorphism levels than the other methods and uniquely provides reliable interval estimates. Although attention is required to its underestimation tendency when some of the distributional assumptions are violated, we demonstrate that the pdPeak method enables a more accurate dimorphism estimate at lower dimorphism levels than previously possible, which is important to illuminating human evolution.

Canine sexual dimorphism in Ardipithecus ramidus was nearly human-like.

Body and canine size dimorphism in fossils inform sociobehavioral hypotheses on human evolution and have been of interest since Darwin's famous reflections on the subject. Here, we assemble a large dataset of fossil canines of the human clade, including all available Ardipithecus ramidus fossils recovered from the Middle Awash and Gona research areas in Ethiopia, and systematically examine canine dimorphism through evolutionary time. In particular, we apply a Bayesian probabilistic method that reduces bias when estimating weak and moderate levels of dimorphism. Our results show that Ar. ramidus canine dimorphism was significantly weaker than in the bonobo, the least dimorphic and behaviorally least aggressive among extant great apes. Average male-to-female size ratios of the canine in Ar. ramidus are estimated as 1.06 and 1.13 in the upper and lower canines, respectively, within modern human population ranges of variation. The slightly greater magnitude of canine size dimorphism in the lower than in the upper canines of Ar. ramidus appears to be shared with early Australopithecus, suggesting that male canine reduction was initially more advanced in the behaviorally important upper canine. The available fossil evidence suggests a drastic size reduction of the male canine prior to Ar. ramidus and the earliest known members of the human clade, with little change in canine dimorphism levels thereafter. This evolutionary pattern indicates a profound behavioral shift associated with comparatively weak levels of male aggression early in human evolution, a pattern that was subsequently shared by Australopithecus and Homo.

Comparison of the accuracy of three interproximal reduction methods used in clear aligner treatment.

OBJECTIVES: To comparatively assess 3 interproximal reduction (IPR) methods used in clear aligner treatment with regard to accuracy, and patient perception of discomfort and anxiety. MATERIALS AND METHODS: A total of 42 patients, treated with the Invisalign® system, were included in this prospective trial and received one of the following IPR methods: hand-operated abrasive strips (group 1; 14 patients, 150 teeth), motor-driven 3/4 oscillating segmental discs (group 2; 14 patients, 134 teeth), or motor-driven abrasive strips (group 3; 14 patients, 133 teeth). Accuracy was evaluated using the difference between planned and executed IPR. Anxiety and discomfort levels experienced by the patients were evaluated using a questionnaire of 17 questions. RESULTS: The accuracy of IPR was high in groups 2 and 3; however, it was low in group 1 with the executed IPR significantly less than the planned amount. On quadrant-level, executed IPR was significantly less in the upper left quadrant in group 1, and significantly more in the upper right quadrant in group 2. The difference between planned IPR and executed IPR was significant for teeth 11, 21, 32, 33, and 43 in group 1, indicating deficiency. The average difference between planned IPR and executed IPR was 0.08 mm for group 1, 0.09 mm for group 2, and 0.1 mm for group 3. Anxiety and discomfort levels did not differ between the methods, but a negative correlation was observed between age and discomfort and anxiety levels. CONCLUSIONS: The overall accuracy of the 2 motor-driven IPR methods was found to be better than the hand-operated system. Maxillary central incisors and mandibular canines were more prone to IPR deficiency when hand-operated abrasive strips were utilized. Patients were similarly comfortable with all 3 methods, and discomfort and anxiety levels decreased with age. CLINICAL RELEVANCE: Motor-driven methods have proven to be more effective when compared to the hand-operated ones by means of precision, speed, and patient comfort. If the clinician favors a hand-operated method, it may be advised to perform slightly more IPR especially on mandibular canines and maxillary central incisors.

Mandibular overdenture with a single implant in the canine region (c-SIMO): a feasibility study.

OBJECTIVES: The aim of this multi-center pilot study was to assess the viability and feasibility of a novel treatment concept - the canine-positioned single implant mandibular overdenture (c-SIMO), with the single implant placed on the patient's preferred chewing side instead of the midline. MATERIALS AND METHODS: Participants received a single implant in the canine region of their preferred chewing side, based on an Asymmetry Index observed during mastication. The pre-existing mandibular denture was transformed into a c-SIMO on a spherical attachment. The primary outcome was oral health-related quality of life (OHRQoL), measured with GOHAI and OHIP-EDENT. Secondary outcomes included denture satisfaction index (DSI), chewing efficiency (CE), maximum bite force (MBF), implant survival and success, and prosthetic maintenance. Data analysis included descriptive statistics and bivariate comparison tests. RESULTS: Fifteen participants received the c-SIMO treatment (mean age: 69.9 ± 7.0). Implant success and survival rates were 100% at 1 year. Patient-reported outcome measures improved significantly compared to pre-treatment values (OHIP-EDENT: p = 0.001; DSI: p = 0.001; GOHAI: p = 0.002). Masticatory outcomes also improved significantly (CE: p = 0.001; overall MBF: p = 0.005). Post-implant, MBF was significantly higher in the ipsilateral side compared to the contralateral side at 2 weeks (p = 0.019) and 3 months (p = 0.015), but no longer at T3 (p = 0.730). Common prosthodontic events included denture base adjustments (n = 17) and matrix activation (n = 9). CONCLUSIONS: This pilot study concludes that c-SIMO is a promising treatment option, and a potential alternative to the single midline implant overdenture. CLINICAL RELEVANCE: The novel treatment concept of a canine-positioned single implant mandibular overdenture could be a viable treatment alternative to the midline positioning.

Evaluation of stress and displacement of maxillary canine during the single canine retraction in the maxillary first premolar extraction cases- A finite element study.

OBJECTIVES: This finite element study aimed to simulate maxillary canine movement during anterior teeth retraction. MATERIALS AND METHODS: Three methods of maxillary canine movement including miniscrew sliding with high hooks (MSH), miniscrew sliding with low hooks (MSL), and the traditional sliding method (TS) without using miniscrews were simulated using three-dimensional finite element analysis. The initial displacement of the maxillary canine, the maximum principal stress of the periodontal ligament and the Von Mises stress were calculated. RESULTS: The distolingual tipping movements of the canine were shown in three movement modes. MSH showed a small tendency to lingual tipping movement and a extrusion movement while MSL had the largest lingual inclination. TS demonstrated a tendency toward distolingual torsion displacement. Compressive stress values were mainly concentrated in the range - 0.003 to -0.006 MPa. For tensile stress, the distribution of MSH and MSL was concentrated in the range 0.005 to 0.009 MPa, TS was mainly distributed about 0.003 MPa. Von Mises equivalent stress distribution showed no significant difference. CONCLUSIONS: The loss of tooth torque was inevitable, irrespective of which method was used to close the extraction space. However, miniscrew application and higher hooks reduced the loss of torque and avoided lingual rotation. CLINICAL RELEVANCE: This study shows that miniscrew implants with different hooks can better control the movement of the maxillary canines. The non-invasive nature of the finite element analysis and its good simulation of dental stress and instantaneous motion trend have a clinical advantage in the analysis of tooth movement.

Radiological features and treatment of erupting maxillary canines in relation to the occurrence of dental developmental abnormalities.

OBJECTIVE: This study aimed to investigate the radiological features of the permanent canines and the treatment carried out to ensure their eruption relative to certain features involved in Dental Anomaly Patterns (DAP). MATERIAL AND METHODS: The cross-sectional part of this retrospective register--based study focused on 1,315 dental panoramic tomographs (DPTs) of children aged 8.5-10.5 years, while the longitudinal part involved information on the treatment provided for 1,269 canines after the DPTs and on their eruption into the oral cavity. RESULTS: The canines of the DAP children more often showed evidence of early treatment (p = 0.014), with girls having more frequently interceptive treatment (p = 0.004) and boys early headgear (p = 0.022). Delayed dental age was associated with early treatment (OR 3.29, 95% CI 1.08-9.99). Either no or clear overlapping of a canine with the lateral incisor occurred more often in the DAP children, whereas canine inclination did not differ between the groups. The root development stage of the canine was more often either beginning or well advanced in the DAP children. CONCLUSIONS: The children with dental developmental abnormalities more often showed evidence of early treatment for the canines. Monitoring of the erupting canines after the first mixed stage is important to enable timely early treatment.

Aesthetic assessment of maxillary lateral and canine implant-supported crowns by laypersons and orthodontists.

INTRODUCTION: The objectives of this study were to evaluate how laypersons and orthodontists evaluate and rank aesthetic parameters of an implant-supported crown (ISC) on the canine position (ISC-C) and lateral position (ISC-L). METHODS: A digital survey of 11 cases, 5 ISC-C, 5 ISC-L and 1 control case without ISC, was distributed to 207 laypersons and 296 orthodontists. All cases included one extraoral photograph and three intraoral photographs. The respondents were asked to identify the ISC and to evaluate the aesthetic parameters regarding colour of the implant (CI), shape of the implant (SI) and gingival colour around ISC (GCI). Differences within and between the groups were tested using Chi-2-test and Independent-Samples t-test. RESULTS: All invited laypersons and 184 orthodontists (62% response rate) answered the survey. Orthodontists (89%) more correctly identified the ISC, regardless of its position, than laypersons (50%) (p < 0.001). Both laypersons (54%) and orthodontists (23%) rated higher proportions of acceptance of CI, SI and GCI in favour for the ISC-L than ISC-C (laypersons: 40%, orthodontists: 10%) (p < 0.001). Assessing each parameter separately, orthodontists rated higher for ISC-L, compared to the ISC-C (p < 0.001). In general, laypersons and orthodontist ranked tooth colour (mean, standard deviation [SD]:8.0,1.5 and 9.0, 1.0) and tooth shape (mean, SD: 8.0, 1.7 and 8.8, 1.2) as aesthetically higher than the gingival colour (mean, SD: 7.2, 2.2 and 8.0, 1.7) (p > 0.001).  Conclusion: Laypersons and orthodontists consider the ISC-L as aesthetically more preferable, compared to the ISC-C.

Predictors of complications associated with unerupted maxillary canines: a cone beam computed tomography study.

To detect predictive factors for the occurrence of complications associated with unerupted maxillary canines (C). A total of 83 cone beam computed tomograms (CBCT), made from November 1, 2021 to October 31, 2022, have met the inclusion criteria, whereby 110 unerupted C were detected. Independent variables were: gender, age, and C position. Outcome variables were detected complications: external root resorption (ERR) and dilaceration of adjacent tooth, ERR and dilaceration of C, dentigerous cyst, canine ankylosis, and adjacent teeth malposition. Chi-square test and logistic regression analysis were used to examine the relationship between income variables and detected complications. Vertical position of unerupted C showed as predictor for adjacent tooth dilacerations and malposition. Chance for dilaceration increases 5.5-fold with C position at the middle third of lateral incisor (LI) root, while chance of malposition increases 23.4-fold with its supra-apical position to the LI root, in comparison to the C position occlusal to the LI cemento-enamel junction. Age is a predictive factor for dentigerous cysts, with decreasing the chance of their occurrence 1.5-fold with each additional year of age. Early evaluation of the vertical position and timely treatment of C are decisive steps in preventing complications.

Cone beam computed tomography assessment of maxillary anterior teeth cervix dimensions in healthy adults for optimal anatomic healing abutments.

OBJECTIVES: The abutments produced with circular symmetry failed to accurately replicate the natural teeth's cervical shapes. The purpose of this study was to measure cervical cross-sections of maxillary anterior teeth using cone beam computed tomography (CBCT) images to design anatomic healing abutments. MATERIALS AND METHODS: CBCT data of 61 patients were analyzed using Ez3D Plus software. Measurements were taken at the cemento-enamel junction (CEJ) and 1 mm coronal to CEJ for maxillary central incisors, lateral incisors, and canines. Various parameters, including area, perimeter, and eight line segments in the distal (a), disto-palatal (b), palatal (c), mesio-palatal (d), mesial (e), mesio-labial (f), labial (g), and disto-labial (h) directions, were used to describe dental neck contours. The ratios (f/b and h/d) were analyzed, and differences based on sex and dental arch morphology were explored. RESULTS: Significant differences were found in area and perimeter between males and females, but not in f/b and h/d ratios. Differences in the f/b ratio were observed among dental arch morphologies for maxillary central incisors, lateral incisors, and canines. CONCLUSIONS: CBCT measurements of cervical cross-sections provide more accurate data for designing anatomic healing abutments. The fabrication of anatomical healing abutments needs to consider the influence of gender on cervical size and to explore the potential effect of arch shape on cervical morphology. CLINICAL SIGNIFICANCE: The novel method provides detailed measurements for the description of dental cervical contours for patients with bilateral homonymous teeth missing. The measurements of this study could be utilized to design more accurate anatomic healing abutments to create desired morphology of peri-implant soft tissue.

Survival of retained permanent canines after autotransplantation: A retrospective cohort study.

INTRODUCTION: After third molars, canines are the teeth most commonly affected by displacement and impaction. Although orthodontic surgical treatment represents the standard method for realignment of canines, autotransplantation (autoTX) functions as the second-line therapy if orthodontic alignment does not succeed in treating impaction and severe displacement. This retrospective cohort study aimed to identify clinical predictors for postoperative survival and endodontic treatment needs after autoTX of severely displaced and impacted canines. METHODS: The study cohort comprised patients who received canine autoTX in a single surgical center between 2006 and 2018. Canines with severe displacement and retention were surgically treated using a standardized protocol. Statistical analysis of survival probability was performed with the Kaplan-Meier method, and bivariate data were analyzed using logistic regression and the Pearson chi-square test. Nonparametric continuous variables were analyzed using the Mann-Whitney U test. RESULTS: Data from 319 patients with 378 canine grafts were available for analysis after a mean follow-up of 54.7 ± 36.5 months on the patient level (range, 0.3-181.8 months). With 25 lost autotransplants, the cumulative survival rate was 93.4%. Patient age at surgery, the state of the apical foramen, endodontic treatment need, and persistence of deciduous teeth at the implantation site had a significant negative impact on autotransplant survival (P <0.05). Endodontic treatment need was significantly related to the patient's age at surgery, the state of the apical foramen, and preoperative orthodontic traction (P <0.05). Thus, these independent variables were identified as clinical predictors for the survival of both the autotransplant and the dental pulp. Gender, ischemia time, postoperative ankylosis, or site of autoTX did not influence any of the outcome variables. CONCLUSIONS: The high survival rates of autotransplanted permanent canines make this treatment a promising option, especially in patients with severe tooth displacement, in which orthodontic treatment alone cannot provide predictable alignment, irrespective of the patient's age. Interpreting age and preoperative orthodontic traction as delaying the onset of autoTX and state of apex, time-dependent aspects seem to be of great importance for postoperative complications leading to endodontic treatment or graft loss. Therefore, early implementation of autoTX as a treatment modality for impacted, severely displaced, and vain exposed canines in daily surgical practice should be encouraged.

Effect of power arm length combined with additional anterior torque on the axial orientation of the maxillary incisors during en-masse retraction: A finite element analysis.

INTRODUCTION: This study aimed to clarify the effect of power arm length combined with additional torque incorporated into the archwire on the controlled movement of the anterior teeth using the finite element method. METHODS: An adult patient requiring medium anchorage after extraction of the maxillary first premolars was selected for this study. The power arms were placed between the lateral incisor and the canine at 3 levels: 3 mm, 6 mm, and 9 mm. A 150 g of retraction force was applied from each height of the anterior hook to the first molar tube, with 0°, 5°, and 10° of applied lingual root torque on the incisors. RESULTS: A 3-mm hook with 10° of applied torque, a 6-mm hook with 5° of applied torque, or a 9-mm hook with no extra torque constituted the best combinations targeted at controlling the inclination of incisors during retraction. Extrusion and distal tipping of the canine were observed. Moreover, mesial tipping and mesiopalatal rotation of the molar were unavoidable. Finally, intercanine and intermolar widths were decreased. CONCLUSIONS: Adding extra torque on the incisors or using high torque brackets is recommended for patients with maxillary first premolar extraction.

Treatment duration by morphology and location of impacted maxillary canines: A cone-beam computed tomography investigation.

INTRODUCTION: This study aimed to identify whether patients with impacted maxillary canines take longer to treat than orthodontic patients without an impacted canine. We also sought to identify factors that are predictive of increased treatment duration in patients with impacted maxillary canines and treated by surgical exposure. METHODS: A retrospective investigation of 37 patients with an impacted maxillary canine, treated by surgical exposure and fixed appliance therapy, was undertaken. In addition, an age- and sex-matched control group of 39 patients (without impacted canines) was also collected. Patient age, sex, and total treatment duration were recorded. For patients with an impacted canine, patient records and pretreatment cone-beam computed tomography datasets were assessed. Point coordinates identifying relevant landmarks were recorded, and a geometric method was used to calculate variables describing canine location, orientation, and apical morphology. RESULTS: Controlling for age and sex, linear regression identified a statistically significant increase in treatment duration of 46.7 and 41.5 weeks for palatal and labial/midalveolar impacted canines, respectively, vs controls (P <0.002). Age and sex of patients with impacted canines collectively affected treatment duration (P = 0.04), with females of increased age being treated faster than younger males. Rotation of the impacted canine crown had a highly significant effect on treatment duration, with every degree of rotation increasing treatment duration by 0.32 weeks (P <0.001). There was a significant degree of multicollinearity between the other radiographic variables. Collectively, radiographic variables describing canine displacement significantly prolonged treatment duration (P <0.001) and explained 29.8% of the variability in total treatment time. The apical morphology of impacted maxillary canines was significantly associated with increased treatment duration (P = 0.01) and explained 11.3% of the overall treatment variability (P = 0.01). CONCLUSIONS: Increased total treatment duration of surgically exposed impacted maxillary canines is associated with increasing mesiopalatal canine crown rotation, worsening displacement, and hooked apical morphology.

Local factors relating to mandibular canine impaction: A retrospective study.

INTRODUCTION: This study aimed to investigate the characteristics of impacted and transmigrated mandibular canines and the association existing between them and some local factors, such as degrees of axial inclination of mandibular incisors, skeletal Class, and mandibular symphysis width. METHODS: A retrospective observational study was performed on the medical records and radiographic examination (panoramic radiographs and lateral cephalograms) of 102 orthodontic patients divided into a study group, with at least 1 impacted mandibular canine (51 subjects) and a control group, without mandibular impaction (51 subjects). A chi-square test, t test, and analysis of variance test analysis were used to analyze the data. RESULTS: Unilateral and buccal impaction and the presence of the deciduous canine were the more prevalent characteristics of impacted canines, whereas 39.2% presented transmigration. Furthermore, the persistence of the deciduous canine on the impaction side (P <0.0001) and the mesial axial inclination of the impacted canine (P <0.0001) were found to be statistically significant characteristics. A statistically significant association was found between the impaction of the mandibular canine and mandibular incisor to the mandibular plane angle (IMPA) (IMPA, 95.8°; P = 0.009). An additional statistically significant association was found with transmigrated canines (IMPA, 96.8°; P = 0.024). CONCLUSIONS: The mesialization of the canine cusp and the persistence of the mandibular deciduous canine are characteristics frequently found in the impaction of the mandibular canine. An accentuated vestibular inclination of the mandibular incisors is significantly associated with mandibular canine impaction.