Formulation of Ocular In Situ Gels with Lithuanian Royal Jelly and Their Biopharmaceutical Evaluation In Vitro.

Royal jelly is a natural substance produced by worker bees that possesses a variety of biological activities, including antioxidant, anti-inflammatory, antibacterial, and protective. Although fresh royal jelly is kept at low temperatures, to increase its stability, it needs to be incorporated into pharmaceutical formulations, such as in situ gels. The aim of this study was to formulate in situ ocular gels containing Lithuanian royal jelly for topical corneal use in order to increase the retention time of the formulation on the ocular surface and bioavailability. Gels were evaluated for physicochemical characteristics (pH, rheological properties, refractive index) and in vitro drug release measuring the amount of 10-hydroxy-2-decenoic acid (10-HDA). An ocular irritation test and cell viability tests were performed using the SIRC (Statens Seruminstitut Rabbit Cornea) cell culture line. Results indicated that all the in situ gels were within an acceptable pH and refractive index range close to corneal properties. Rheology studies have shown that the gelation temperature varies between 25 and 32 °C, depending on the amount of poloxamers. The release studies have shown that the release of 10-HDA from in situ gels is more sustained than royal jelly suspension. All gel formulations were non-irritant according to the short-time exposure test (STE) using the SIRC cell culture line, and long-term cell viability studies indicated that the formulations used in small concentrations did not induce cell death. Prepared in situ gels containing royal jelly have potential for ocular drug delivery, and they may improve the bioavailability, stability of royal jelly, and formation of non-irritant ocular formulations.

Intranasal In Situ Gel of Apixaban-Loaded Nanoethosomes: Preparation, Optimization, and In Vivo Evaluation.

The present study was conducted to formulate ethosomal thermoreversible in situ gel of apixaban, an anticoagulant drug, for nasal delivery. Ethosomes were formed, of lecithin, cholesterol, and ethanol, by using thin-film hydration method. The prepared ethosomes were characterized by Zetasizer, transmission electron microscope, entrapment efficiency, and in vitro study. The selected ethosomal formula (API-ETHO2) was incorporated in gel using P407 and P188 as thermoreversible agents and carbopol 934 as mucoadhesive agent. Box-Behnken design was used to study the effect of independent variables (concentration of P407, P188, and carbopol 934) on gelation temperature, mucoadhesive strength, and in vitro cumulative percent drug released at 12h (response variables). The optimized formulation was subjected to compatibility study, ex vivo permeation, histopathological examination for the nasal mucosa, and in vivo study. API-ETHO2 was spherical with an average size of 145.1±12.3 nm, zeta potential of -20±4 mV, entrapment efficiency of 67.11%±3.26, and in vitro % release of 79.54%±4.1. All gel formulations exhibited an acceptable pH and drug content. The optimum gel offered 32.3°C, 1226.3 dyne/cm2, and 53.50% for gelation temperature, mucoadhesive strength, and in vitro percent released, respectively. Apixaban ethosomal in situ gel evolved higher ex vivo permeation (1.499±0.11 µg/cm2h) through the nasal mucosa than pure apixaban gel. Histopathological study assured that there is no necrosis or tearing of the nasal mucosa happened by ethosomal gel. The pharmacokinetic parameters in rabbit plasma showed that intranasal administration of optimized API-ethosomal in situ gel achieved higher Cmax and AUC0-∞ than unprocessed API nasal gel, nasal suspension, and oral suspension. The ethosomal thermoreversible nasal gel established its potential to improve nasal permeation and prolong anticoagulant effect of apixaban.

Iron Ion-Releasing Polypeptide Thermogel for Neuronal Differentiation of Mesenchymal Stem Cells.

A poly(ethylene glycol)-based thermogel can capture an iron ion (Fe3+) through a crown ether-like coordination bond between the oxygen atom and metal ions, thus, providing a sustained Fe3+-releasing system. Poly(ethylene glycol)-l-poly(alanine) thermogel was used in this study. The polypeptide forms a rather robust gel, and the degradation products are a neutral amino acid, which provides cyto-compatible neutral pH environments during the cell culture. During the heat-induced sol-to-gel transition at 37 °C, tonsil-derived mesenchymal stem cells (TMSCs) and iron ions were incorporated, leading to the formation of a three-dimensional matrix toward neuronal differentiation of the incorporated TMSCs. The initial concentration of the iron ions was varied between 0, 15, 30, and 60 mM. About 10% of the loaded iron ions was released over 21 days, which continuously supplied iron ions to the cells. The incorporation of iron ions not only increased the gel modulus at 37 °C from 107 to 680 Pa, but also promoted cell aggregation with a significant secretion of the cell adhesion signal of FAK. Expression of biomarkers related to the neuronal differentiation of TMSCs, including NFM, MAP2, GFAP, NURR1, NSE, and TUBB3, increased 4-35-fold at the mRNA level in the Fe3+-containing system compared to that of the system without Fe3+. Immunofluorescence studies also confirmed pronounced cell aggregation and a significant increase in neuronal biomarkers at the protein level. This study suggests that an iron ion-releasing thermogelling system can be a promising injectable scaffold toward neuronal differentiation of stem cells.

Nanosized nasal emulgel of resveratrol: preparation, optimization, in vitro evaluation and in vivo pharmacokinetic study.

Nano-emulgel has become one of the most significant controlled release systems, which has the advantages of both gels and nano-emulsions. This work aims at the formulation of nasal nano-emulgel for resveratrol, employing carbopol 934 and poloxamer 407 as the gelling agents. The optimum nano-emulsion was determined through further characterization of the selected system. The nasal nano-emulgel was prepared and tested for the in vitro release, the release kinetics, FTIR, ex vivo permeation, nasal mucosa toxicity, and in vivo pharmacokinetic study. The optimum nano-emulsion consisted of Tween 20, Capryol 90, and Transcutol at a ratio of (54.26: 23.81: 21.93%v/v), and it exhibited transmittance of 100%, resveratrol solubility of 159.9 ± 6.4 mg/mL, globule size of 30.65 nm. The in vitro resveratrol released from nano-emulsion and nasal nano-emulgel was 96.17 ± 4.43% and 78.53 ± 4.7%, respectively. Ex vivo permeation was sustained during 12 h up to 63.95 ± 4.7%. The histopathological study demonstrated that the formula is safe and tolerable to the nasal mucosa. Cmax and AUC (0-∞) of resveratrol obtained after nasal administration of nasal nano-emulgel was 2.23 and 8.05 times, respectively. Similarly, Tmax was increased up to 3.67 ± 0.82 h. The optimized nasal nano-emulgel established intranasal safety and bioavailability enhancement so it is considered as a well-designed system to target the brain.

Design, preparation, and evaluation of liposomal gel formulations for treatment of acne: in vitro and in vivo studies.

The study highlights the significance of co-application of bioactive components into liposomal gel formulations and their comparison to azithromycin for treatment of Acne. A Design of Experiments (DoE) approach was utilized to obtain optimized liposomal formulation encapsulating curcumin, with size and zeta potential of ∼100 nm and ∼14 mV, respectively, characterized by DLS, HR-TEM, FESEM, and AFM. The curcumin liposomal dispersion depicted excellent stability over the period of 60 days, which was further converted in gel form using Carbopol. Pharmacokinetics of curcumin-loaded liposomal gel showed that Tmax for curcumin was achieved within 1 h of post application in both stratum corneum and skin, indicating quick penetration of nano-sized liposomes. Stratum corneum depicted Cmax of 688.3 ng/mL and AUC0-t of 5857.5 h × ng/mL, while the skin samples displayed Cmax of 203.3 ng/gm and AUC0-t of 2938.1 h × ng/gm. Lauric acid and azithromycin liposomal gel formulations were prepared as per the optimum parameters obtained by DoE. In antibacterial activity using agar diffusion assay, lauric acid gel formulation revealed ∼1.5 fold improved antibacterial effect than curcumin gel formulation. Interestingly, their co-application (1:1) exhibited significantly enhanced antibacterial effect against both macrolide-sensitive (1.81 versus 1.25 folds) and resistant strains of P. acnes (2.93 versus 1.22 folds) than their individual counterparts. The in vivo studies in rat ear model displayed a ∼2 fold reduction in comedones count and cytokines (TNF-α and IL-1ß) on co-application with curcumin and lauric acid liposomal gel compared to placebo treated group.

Extraction, formulation and characterization of an in vitro and ex-vivo evaluation of Thymus serpyllum L. (Thymus oil) from topical preparations using dialysis cellulose membrane and natural rabbit skin.

Herbal remedies like the Thymus serpyllum L. is useful in traditional medicine for the treatment of many diseases especially congestion, and bronchitis. The purpose of this study was to formulate a micro-emulsion, a gel and an ointment containing the plant hydro distilled thymus oil extracted from Thymus serpyllum L. collected from Ziarat, Balochistan. The prepared formulations were subjected to in-vitro and ex vivo study release, High performance Liquid Chromatography (HPLC), Thin Layer Chromatography (TLC), to justify their suitability for topical use. The in-vitro and ex-Vivo release was studied using Franz Cells and using two different kinds of membrane synthetic dialysis cellulose membrane and natural rabbit skin and the amount of drug released was determined by HPLC at λ 274nm. The three formulations result obtained through dialysis cellulose membrane showed the faster release than the natural rabbit skin. However, the micro-emulsion, gel formulation showed the same release except ointment. The release from the above mentioned formulation can be arranged in the following descending order. micro-emulsion > Gel > Ointment. The best fit of release kinetics was achieved by Krosmeyer- Peppas, the TLC and HPLC identifies the Thymol, isolation and quantification of the marker. This study demonstrates that it is necessary to assess the impact of release and permeability pattern of different formulations. In vitro and ex-vivo diffusion cell experiments can be utilized to develop formulations of traditional medicines identifies.

Zwitterionic gel encapsulation promotes protein stability, enhances pharmacokinetics, and reduces immunogenicity.

Advances in protein therapy are hindered by the poor stability, inadequate pharmacokinetic (PK) profiles, and immunogenicity of many therapeutic proteins. Polyethylene glycol conjugation (PEGylation) is the most successful strategy to date to overcome these shortcomings, and more than 10 PEGylated proteins have been brought to market. However, anti-PEG antibodies induced by treatment raise serious concerns about the future of PEGylated therapeutics. Here, we demonstrate a zwitterionic polymer network encapsulation technology that effectively enhances protein stability and PK while mitigating the immune response. Uricase modified with a comprehensive zwitterionic polycarboxybetaine (PCB) network exhibited exceptional stability and a greatly prolonged circulation half-life. More importantly, the PK behavior was unchanged, and neither anti-uricase nor anti-PCB antibodies were detected after three weekly injections in a rat model. This technology is applicable to a variety of proteins and unlocks the possibility of adopting highly immunogenic proteins for therapeutic or protective applications.

Long-lasting fibrin matrices ensure stable and functional angiogenesis by highly tunable, sustained delivery of recombinant VEGF164.

Clinical trials of therapeutic angiogenesis by vascular endothelial growth factor (VEGF) gene delivery failed to show efficacy. Major challenges include the need to precisely control in vivo distribution of growth factor dose and duration of expression. Recombinant VEGF protein delivery could overcome these issues, but rapid in vivo clearance prevents the stabilization of induced angiogenesis. Here, we developed an optimized fibrin platform for controlled delivery of recombinant VEGF, to robustly induce normal, stable, and functional angiogenesis. Murine VEGF164 was fused to a sequence derived from α2-plasmin inhibitor (α2-PI1-8) that is a substrate for the coagulation factor fXIIIa, to allow its covalent cross-linking into fibrin hydrogels and release only by enzymatic cleavage. An α2-PI1-8-fused variant of the fibrinolysis inhibitor aprotinin was used to control the hydrogel degradation rate, which determines both the duration and effective dose of factor release. An optimized aprotinin-α2-PI1-8 concentration ensured ideal degradation over 4 wk. Under these conditions, fibrin-α2-PI1-8-VEGF164 allowed exquisitely dose-dependent angiogenesis: concentrations ≥25 µg/mL caused widespread aberrant vascular structures, but a 500-fold concentration range (0.01-5.0 µg/mL) induced exclusively normal, mature, nonleaky, and perfused capillaries, which were stable after 3 mo. Optimized delivery of fibrin-α2-PI1-8-VEGF164 was therapeutically effective both in ischemic hind limb and wound-healing models, significantly improving angiogenesis, tissue perfusion, and healing rate. In conclusion, this optimized platform ensured (i) controlled and highly tunable delivery of VEGF protein in ischemic tissue and (ii) stable and functional angiogenesis without introducing genetic material and with a limited and controllable duration of treatment. These findings suggest a strategy to improve safety and efficacy of therapeutic angiogenesis.

The efficacy, bioavailability and safety of a novel hydroalcoholic testosterone gel 2% in hypogonadal men: results from phase II open-label studies.

Pharmacokinetics, pharmacodynamics and safety of a novel hydroalcoholic testosterone gel 2% (TG) were evaluated in phase II sequential dose escalation studies using 3 application sites (thigh, abdomen and shoulder/upper arm) and 2 application methods. Hypogonadal men (n = 40), 18-75 years, with serum testosterone <300 ng dl(-1) were included in both studies. Study 1 evaluated hand-applied multiple doses of TG 1.25, 2.50 and 3.75 ml (23, 46 and 70 mg of testosterone, respectively), once daily for 10 days to shoulder/upper arm. Study 2 evaluated applicator-applied (TG 1.25, 2.50 and 3.75 ml) versus hand-applied (TG 2.5 ml) doses, once daily for 7 days to shoulder/upper arm. Primary endpoint for both studies was responder rate (Cave testosterone levels between 298 and 1050 ng dl(-1) ). In Study 1 following multiple applications, >70% participants in each group were responders. Dose-dependent increase was observed in PK values for total testosterone, free testosterone and DHT. In Study 2, responder rate was dose proportional: 16.7%, 50.0% and 77.8% responders in TG 1.25, 2.50 and 3.75 ml groups respectively. The bioavailability was highest for the shoulder application. There was a significant improvement in almost all the domains of sexual functioning. Applicator-application was preferred over hand-application by majority of the participants. TG was found to be safe and well tolerated in hypogonadal men.

Preparation, optimization, and evaluation of Zaltoprofen-loaded microemulsion and microemulsion-based gel for transdermal delivery.

CONTEXT: Zaltoprofen, a non-steroidal anti-inflammatory drug, has potent inhibitory action against nociceptive responses. However, gastrointestinal ulcer accompanied with anemia due to the bleeding are most cited side effects associated with it. Due to this, administration of Zaltoprofen is not suitable for individuals with gastric ulcer. Thus, there is unmet need to develop an alternative delivery system that will be easy to administer and can avoid ulcerogenic side effects associated with it. OBJECTIVE: Present study was aimed to prepare and evaluate microemulsion (ME) and microemulsion-based gel formulation of Zaltoprofen for transdermal delivery. MATERIALS AND METHODS: Pseudo-ternary phase diagrams were utilized to prepare ME formulations. Effect of surfactant and co-surfactant mass ratio on the ME formation and permeation of ME were evaluated and formulation was optimized. Permeation studies were performed using excised pigskin was studied. Efficacy of optimized formulations was evaluated in rat model of inflammation and pain. RESULTS: Composition of optimized formulation was 1% (w/w) Zaltoprofen, 20% (w/w) Capryol 90, 50% (w/w) Smix (2:1, Cremophor RH 40 and Transcutol P). Optimized formulation showed globule size of 22.11 nm, polydispersity index of 0.251 and zeta potential of -11.4 mV. ME gel was found safe in skin irritation study. Significant analgesic activity and anti-inflammatory activity of ME gel was observed in hot plate test and rat paw edema test, respectively. CONCLUSION: In conclusion, results of present study suggest that ME could be a promising formulation for transdermal administration of Zaltoprofen.

Preparation and in vivo evaluation of in situ gel system as dual thermo-/pH-responsive nanocarriers for sustained ocular drug delivery.

OBJECTIVE: Ciprofloxacin (CIP) was effective in treating bacterial keratitis. The purpose of this study was to prepare an effective prolonged-release of CIP by both temperature and pH-triggered in situ nanogels for the treatment of keratitis. MATERIALS AND METHODS: Poly(N-isopropylacrylamide-methacrylicacide-vinylpyrrolidone) [P (NIPAAm-MAA-VP)] nanoparticles was synthesised and used for preparation of CIP-loaded nanogels. Antimicrobial and in vivo animal studies of the CIP-loaded nanoformulation were performed. RESULTS: Nanoformulation with a mean particle size between 10 and 50 nm and higher than 95% encapsulation efficiency was obtained. Ciprofloxacin released from the nanoparticles showed an enhanced antibacterial effect as determined by minimal inhibitory concentrations. In vivo studies demonstrated reasonable efficacy in severe keratitis using the developed nanoformulation. CONCLUSIONS: Nanoformulation had acceptable efficacy in treating bacterial keratitis in an animal model. Therefore, the developed system has the potential to be used in localised application for the treatment of keratitis.

Principles of topical treatment: advancement in gel vehicle technology.

Topical treatment is a pillar of dermatologic practice. The delivery of drug by a topical vehicle is dependent on complex physical chemistry and on how well patients apply the product. The potency of topical agents is not solely dependent on the concentration of active drug in the vehicle. A corticosteroid molecule may have vastly different potency depending on what vehicle is used to deliver it. Similarly, a new gel vehicle is able to deliver considerably more active antifungal than an older vehicle technology and may represent a promising vehicle for other novel formulations. The use of new vehicles can provide more effective means for treating patients with skin disease.

Cold-set whey protein microgels containing immobilised lipid phases to modulate matrix digestion and release of a water-soluble bioactive.

This study investigated the in-vitro digestibility of cold-set whey protein (WP) microgels prepared by two gelation methods (external and internal) containing lipids (0%, 10% or 20% w/w). The incorporation of lipids into these matrices achieved higher entrapment of the bioactive vitamin riboflavin, as well as significant reductions in rates of both the digestion of the protein matrix, and the subsequent diffusion of the water-soluble bioactive. A biexponential model accounted for the contribution of digestion- and diffusion-driven mechanisms in describing the release of riboflavin into enzyme containing simulated gastrointestinal fluids. In particular, for external gelation microgels, as the lipid load within the matrices increased, the contribution of a faster diffusion-driven release was almost completely negated by a slower digestion-assisted release. Lipid loads provided a composite matrix capable of alternating from a burst to a sustained release of bioactive.

Enhanced penetration of fluoride particles into bovine enamel by combining dielectrophoresis with AC electroosmosis.

Fluoride deposition into the pores of enamel is necessary at high concentrations to reduce enamel demineralization and with a high degree of penetration to account for loss by ingestion. Current diffusion and electrochemical methods are inadequate for effectively transporting fluoride greater than 20 µm into enamel. The study explores the coupling of dielectrophoresis (DEP) and AC electroosmosis (ACEO) to selectively concentrate fluoride particles from fluoride gel excipients and enhance their penetration into enamel. By measuring the frequency response of approximately 10-µm-sized sodium fluoride particles in an aqueous gel media, appropriate frequencies for positive DEP, negative DEP, and ACEO are identified. An assembly composed of two cross-planar interdigitated electrode (IDE) arrays with open slots is driven successively by fields at appropriate frequencies to drive fluoride particles through the slots of the IDE and into the enamel pores using a combination of DEP and ACEO methods. Fluoride uptake and penetration of 1.23% acidulated phosphate fluoride gel into bovine tooth enamel at various depths is measured using wavelength dispersive spectrometry to compare deposition by diffusion, DEP, and DEP plus ACEO. Fluoride levels in all DEP groups were significantly higher than diffusion groups at depths 10 and 20 µm. The highest fluoride concentrations at 10, 20, 50, and 100 µm depths occur under deposition conditions combining DEP with ACEO. Fluoride levels at 50 µm were equivalent to long-term prophylactic exposure. These methods may potentially benefit populations at high risk for development of caries and periodontal disease, including underserved children and disparate groups.

Safety, Pharmacokinetics, and Pharmacodynamics of Midazolam Gel After Rectal Administration in Healthy Chinese Subjects.

BACKGROUND AND OBJECTIVES: Midazolam rectal gel is a novel rectal formulation that may be a promising and potential alternative to oral administration for pediatric sedation. The objective of this study was to evaluate the safety, pharmacokinetics, pharmacodynamics, and absolute bioavailability of midazolam rectal gel in healthy Chinese subjects. METHODS: An open-label, single-dose, randomized, two-period, two-treatment, crossover clinical study was conducted in 22 healthy subjects (16 males and six females), each receiving 2.5 mg intravenous midazolam in one period and 5 mg midazolam rectal gel in another period (the dosages here were calculated as active midazolam). Safety, pharmacokinetic, and pharmacodynamic assessments were conducted throughout the study. RESULTS: All of the subjects completed both treatment periods. The formulation of rectal gel was well tolerated, with no serious adverse events occurring. After a single rectal dose of 5 mg midazolam rectal gel, it was absorbed rapidly with a median value of time to peak concentration (Tmax) of 1.00 h, and mean values of the peak concentration (Cmax) and area under the concentration-time curve (AUC0-t) of 37.2 ng/mL and 137 h·ng/mL, respectively. The absolute bioavailability of rectal gel was 59.7%. The rectal gel exhibited a relatively delayed onset but a more stable sedative effect and a longer duration when compared with intravenous midazolam. CONCLUSION: Midazolam rectal gel may be a feasible alternative with a high level of acceptance in pediatric sedation and enhanced bioavailability compared to an oral formulation. The modeling results may help to disclose out the exposure-response relationship of midazolam rectal gel and support the design of an escalating-doses study and pediatric extrapolation study. CLINICAL TRIAL REGISTRATION: The study was registered at http://www.chinadrugtrials.org.cn (No. CTR20192350).

Improved initial burst of estradiol organogel as long-term in situ drug delivery implant: formulation, in vitro and in vivo characterization.

OBJECTIVE: The present investigation was aimed at optimizing of estradiol (E2) loaded l-amino acid derivatives organogel formulations resulting in improved the high initial release problems and sustained release of E2. METHODS: The visco-elastic properties of blank organogels were measured by rheometer. The E2 organogel formulations were optimized using a central composite design. Also, the effect of gelator structure and composition of the gel formulations on release behavior (in vitro and in vivo) had been studied. RESULTS: The change of the gelator structure could affect significantly the stiffness of the implants. The release behavior of gel without N-Methyl-2-pyrrolidinone (NMP) was controlled by gel corrosion only. While the drug release of the gel with NMP was controlled by both corrosion and diffusion. The high initial release problems of the organogels were improved by optimizing the formulations. The system consisting by N-Lauroyl L-lysine methyl ester (LLM) derivative in the oil indicated the lowest initial drug release, showed a much lower blood drug level and maintained a steady state for nearly 1 month. CONCLUSION: Organogels based on L-lysine methyl ester derivative were ideal carriers for long-term parenteral administration of E2.

[Preparation of diazepam transdermal gel and its bioavailability].

OBJECTIVE: To prepare diazepam transdermal gel and to assess its bioavailability. METHODS: Using Carbopol 934 as a gel matrix, the diazepam transdermal gel was prepared with glycerol as the humectant and azone as penetration enhancer. The penetration rate of diazepam through excised rabbit skin was measured by Franz diffusion cell and HPLC method. Using diazepam tablets as control, the relative bioavailability of diazepam gel was determined in rabbits. RESULTS: The transdermal flux of diazepam gel was 39.26 g/cm(2)/h and the bioavailability of diazepam gel was 36.25%. CONCLUSION: Diazepam gel prepared in the study would be developed as a novel transdermal preparation.

Distribution of dexamethasone and preservation of inner ear function following intratympanic delivery of a gel-based formulation.

Intratympanic (IT) delivery of drugs to the ear is increasingly used for both clinical and research purposes. One limitation of IT delivery is that drugs are rapidly lost from the middle ear by a number of processes, so that prolonged delivery of drug is technically difficult. In the present study, the delivery characteristics of a poloxamer hydrogel formulation containing dexamethasone (dex) were evaluated. The gel is liquid at room temperature, allowing IT injection, but transitions to a gel at body temperature, providing a prolonged residence time in the middle ear. A 50-µl volume of control or dex-containing gel (dex-gel) was injected through the tympanic membrane of guinea pigs. Cochlear function was assessed with cochlear action potential and acoustic emission thresholds measured immediately, 6 or 24 h after IT gel injection. After 6- or 24-hour treatment with dex-gel, perilymph drug gradients along the cochlea were assessed by taking samples sequentially from the apex, and endolymph was sampled from the basal turn. Control gel injections caused small changes in sound field calibrations and functional measures for low-frequency stimuli, consistent with an induced conductive loss. Within 24 h, responses returned to normal. Twenty-four hours after dex-gel injection, low-frequency changes remained as the dex-gel was retained better in the middle ear, but there was no indication of high-frequency loss. While perilymph sample data showed that dex gradients were substantially lower than after single injections of dex solution, quantitative analysis of this result suggests that some dex may have entered the perilymph through the thin bone in the apical region of the cochlea. Endolymph levels of dex remained lower than those in the perilymph. This study confirms that a poloxamer hydrogel-based dex formulation provides an effective method for a prolonged delivery, providing a more uniform distribution of drug in the inner ear.

In vitro percutaneous absorption of genistein from topical gels through human skin.

The objective of this study was to formulate genistein as a topical gel with various penetration enhancers for increased permeation and retention in human skin. The high performance liquid chromatography assay method was validated for precision and reproducibility. The intra-day and inter-day precision as represented by the coefficient of variation (CV) of the peak areas were <0.44% and <0.67%, respectively. Further, the reproducibility was demonstrated by the CV of the assay at different genistein concentrations, which were <1.64%. Genistein was subjected to various stress conditions to obtain basic information on the appropriate pH and aqueous vehicle for formulating topical gels. Genistein was highly stable under neutral and oxidative conditions, but degraded to highly polar and nonpolar compounds under basic and acidic conditions, respectively. Menthol produced a 9- and 22-fold increase in the flux and skin retention of genistein, respectively, after 24 h of gel application as compared with the control (no enhancer). Cineole showed an approximately 7-fold increase in flux, but skin retention did not increase significantly. Transcutol increased the flux and skin retention of genistein by 5- and 7-fold, respectively. When Transcutol was formulated with Lauroglycol, there was a 13- and 9-fold increase in the flux and skin retention, respectively. Incorporation of penetration enhancers into the topical gel increased the skin permeation of genistein, so that the target delivery rate for its therapeutic effects can be achievable based on the in vitro human skin data generated in this study.

Quantification of dermal and transdermal delivery of meloxicam gels in rabbits.

BACKGROUND: This study was designed to quantify the effects of penetration enhancers on systemic bioavailability of 0.3% meloxicam (MLX) hydroxypropylcellulose gels. Cutaneous microdialysis was also performed to assess dermis availability and to better understand the penetration process. The gels tested were a 1% oleic acid gel, a 5% menthol gel, and a control gel without penetration enhancers. METHODS: To assess systemic bioavailability, three female rabbits received according to a crossover design 0.135 g/cm(2) of gel applied to a 7.5 × 7.5 cm area of their shaved back and a short (5 min) infusion of 1 mg. In each experiment, blood samples were collected serially for 36 h and analyzed by a validated HPLC method. For skin bioavailability studies, 0.135 g/cm(2) of the same gels were applied to a 1 × 2 cm area on top of a microdialysis probe previously inserted in the dermis. Dialysate samples were collected for 6 h every 30 min. RESULTS: Systemically, the 5% menthol gel delivered 3.93 ± 0.85 mg of MLX versus the 1.41 ± 0.24 mg of the oleic acid gel. Only traces of MLX were detectable from the control gel. In dermis, substantial concentrations of MLX were detected only after the application of the menthol gel, whereas skin concentration from the control gel and the 1% oleic acid gel were always below the lowest limit of quantification (LLOQ). CONCLUSIONS: The 5% menthol gel can possibly deliver therapeutically relevant amount of MLX in vivo. Dermis concentrations can be predictive of systemic plasma levels.