Structural insights into the specific interaction between Geobacillus stearothermophilus tryptophanyl-tRNA synthetase and antimicrobial Chuangxinmycin.

The potential antimicrobial compound Chuangxinmycin (CXM) targets the tryptophanyl-tRNA synthetase (TrpRS) of both Gram-negative and Gram-positive bacteria. However, the specific steric recognition mode and interaction mechanism between CXM and TrpRS is unclear. Here, we studied this interaction using recombinant GsTrpRS from Geobacillus stearothermophilus by X-ray crystallography and molecular dynamics (MD) simulations. The crystal structure of the recombinant GsTrpRS in complex with CXM was experimentally determined to a resolution at 2.06 Å. After analysis using a complex-structure probe, MD simulations, and site-directed mutation verification through isothermal titration calorimetry, the interaction between CXM and GsTrpRS was determined to involve the key residues M129, D132, I133, and V141 of GsTrpRS. We further evaluated binding affinities between GsTrpRS WT/mutants and CXM; GsTrpRS was found to bind CXM through hydrogen bonds with D132 and hydrophobic interactions between the lipophilic tricyclic ring of CXM and M129, I133, and V141 in the substrate-binding pockets. This study elucidates the precise interaction mechanism between CXM and its target GsTrpRS at the molecular level and provides a theoretical foundation and guidance for the screening and rational design of more effective CXM analogs against both Gram-negative and Gram-positive bacteria.

Dynamics of DNA nicking and unwinding by the RepC-PcrA complex.

The rolling-circle replication is the most common mechanism for the replication of small plasmids carrying antibiotic resistance genes in Gram-positive bacteria. It is initiated by the binding and nicking of double-stranded origin of replication by a replication initiator protein (Rep). Duplex unwinding is then performed by the PcrA helicase, whose processivity is critically promoted by its interaction with Rep. How Rep and PcrA proteins interact to nick and unwind the duplex is not fully understood. Here, we have used magnetic tweezers to monitor PcrA helicase unwinding and its relationship with the nicking activity of Staphylococcus aureus plasmid pT181 initiator RepC. Our results indicate that PcrA is a highly processive helicase prone to stochastic pausing, resulting in average translocation rates of 30 bp s-1, while a typical velocity of 50 bp s-1 is found in the absence of pausing. Single-strand DNA binding protein did not affect PcrA translocation velocity but slightly increased its processivity. Analysis of the degree of DNA supercoiling required for RepC nicking, and the time between RepC nicking and DNA unwinding, suggests that RepC and PcrA form a protein complex on the DNA binding site before nicking. A comprehensive model that rationalizes these findings is presented.

Airborne Disinfection by Dry Fogging Efficiently Inactivates Severe Acute Respiratory Syndrome Coronavirus 2 (SARS-CoV-2), Mycobacteria, and Bacterial Spores and Shows Limitations of Commercial Spore Carriers.

Airborne disinfection of high-containment facilities before maintenance or between animal studies is crucial. Commercial spore carriers (CSC) coated with 106 spores of Geobacillus stearothermophilus are often used to assess the efficacy of disinfection. We used quantitative carrier testing (QCT) procedures to compare the sensitivity of CSC with that of surrogates for nonenveloped and enveloped viruses, including severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), mycobacteria, and spores, to an aerosolized mixture of peroxyacetic acid and hydrogen peroxide (aPAA-HP). We then used the QCT methodology to determine relevant process parameters to develop and validate effective disinfection protocols (≥4-log10 reduction) in various large and complex facilities. Our results demonstrate that aPAA-HP is a highly efficient procedure for airborne room disinfection. Relevant process parameters such as temperature and relative humidity can be wirelessly monitored. Furthermore, we found striking differences in inactivation efficacies against some of the tested microorganisms. Overall, we conclude that dry fogging a mixture of aPAA-HP is highly effective against a broad range of microorganisms as well as material compatible with relevant concentrations. Furthermore, CSC are artificial bioindicators with lower resistance and thus should not be used for validating airborne disinfection when microorganisms other than viruses have to be inactivated.IMPORTANCE Airborne disinfection is not only of crucial importance for the safe operation of laboratories and animal rooms where infectious agents are handled but also can be used in public health emergencies such as the current severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) pandemic. We show that dry fogging an aerosolized mixture of peroxyacetic acid and hydrogen peroxide (aPAA-HP) is highly microbicidal, efficient, fast, robust, environmentally neutral, and a suitable airborne disinfection method. In addition, the low concentration of dispersed disinfectant, particularly for enveloped viral pathogens such as SARS-CoV-2, entails high material compatibility. For these reasons and due to the relative simplicity of the procedure, it is an ideal disinfection method for hospital wards, ambulances, public conveyances, and indoor community areas. Thus, we conclude that this method is an excellent choice for control of the current SARS-CoV-2 pandemic.

Assessing the Interactions of Statins with Human Adenylate Kinase Isoenzyme 1: Fluorescence and Enzyme Kinetic Studies.

Statins are the most effective cholesterol-lowering drugs. They also exert many pleiotropic effects, including anti-cancer and cardio- and neuro-protective. Numerous nano-sized drug delivery systems were developed to enhance the therapeutic potential of statins. Studies on possible interactions between statins and human proteins could provide a deeper insight into the pleiotropic and adverse effects of these drugs. Adenylate kinase (AK) was found to regulate HDL endocytosis, cellular metabolism, cardiovascular function and neurodegeneration. In this work, we investigated interactions between human adenylate kinase isoenzyme 1 (hAK1) and atorvastatin (AVS), fluvastatin (FVS), pravastatin (PVS), rosuvastatin (RVS) and simvastatin (SVS) with fluorescence spectroscopy. The tested statins quenched the intrinsic fluorescence of hAK1 by creating stable hAK1-statin complexes with the binding constants of the order of 104 M-1. The enzyme kinetic studies revealed that statins inhibited hAK1 with significantly different efficiencies, in a noncompetitive manner. Simvastatin inhibited hAK1 with the highest yield comparable to that reported for diadenosine pentaphosphate, the only known hAK1 inhibitor. The determined AK sensitivity to statins differed markedly between short and long type AKs, suggesting an essential role of the LID domain in the AK inhibition. Our studies might open new horizons for the development of new modulators of short type AKs.

A microbiological inhibition method for the rapid, broad-spectrum, and high-throughput screening of 34 antibiotic residues in milk.

In this study, we developed a microbiological inhibition method for the rapid screening of antibiotics in milk with Geobacillus stearothermophilus ATCC12980 as an indicator bacterium and an easy sample pretreatment. We observed that the limits of detection of the kit for 34 common antibiotic residues in milk, including ß-lactams (13), aminoglycosides (6), tetracyclines (4), sulfonamides (6), macrolides (4), lincosamides (1), were lower than or close to the maximum residue limits formulated by the European Union and China. Moreover, the false-positive rate was 1% and the false-negative rates were less than 5%. The ruggedness of the method (the reproducibility of detection capability of different batches of medium) met requirements at determined levels and residual limits. The shelf life of the kit was more than 6 mo at 4°C. Additionally, we observed good correlations between the kit results and ultra-high-performance liquid chromatography-tandem mass spectrometry results for incurred milk (samples taken from animals treated with antibiotics according to the pre-slaughter medication data), which indicated that the kit was reliable for screening antibiotics in incurred samples. In conclusion, the kit has a broad application potential with high sensitivity, specificity, and reproducibility, stability, and reliability, combined with simple operation, low cost, and high-throughput capacity.

Physicochemical Solubility of and Biological Sensitivity to Long-Chain Alcohols Determine the Cutoff Chain Length in Biological Activity.

The cutoff phenomenon associated with the effectiveness of long-chain alcohols in the induction of anesthesia is also observed for various antimicrobial activities, although the mechanism has remained unknown for over eight decades. The minimum inhibitory concentrations at 25°C for budding yeast growth exponentially decreased with increasing chain length of n-alcohols (C2-C12), whereas alcohols ≥C13 lost the inhibitory effect. Thus, growth inhibition by n-alcohols obeys the Meyer-Overton correlation up to C12 and exhibits a cutoff phenomenon. The densities of n-alcohols are low, and the melting point and hydrophobicity increase with chain length. C13 and C14 inhibited yeast growth at 39.8°C, above their melting points. Alcohols ≤C14 inhibited thermophilic bacterial growth at 50°C, whereas C16 inhibited it at 67.5°C, above their melting points. Thus, the high melting points of long-chain alcohols contribute to the cutoff phenomenon. C14 did not effectively inhibit yeast growth in a static culture at 39.8°C, in contrast to a shaking culture, in which the low density-dependent concentration gradient was eliminated. The duration of the transient growth inhibition of yeast by C12 was prolonged by sonication, which prevented hydrophobic aggregation. Therefore, a nonuniform distribution owing to low density and high hydrophobicity contributes to the cutoff. C14 inhibited the growth at 25°C of the pdr1,3,5 mutant, defective in multidrug efflux pumps, whereas C12 did not inhibit the growth of yeast overexpressing PDR5, indicating that the sensitivity to long-chain alcohols contributed to the cutoff. A balance between the physicochemical solubility of and the biological sensitivity to long-chain alcohols determines the cutoff chain length.

Evaluating different concentrations of hydrogen peroxide in an automated room disinfection system.

UNLABELLED: A comparative study was made on the efficacy of 5, 10 and 35% weight by weight (w/w) hydrogen peroxide solutions when applied using an automated room disinfection system. Six-log biological indicators of methicillin-resistant Staphylococcus aureus (MRSA) and Geobacillus stearothermophilus were produced on stainless steel coupons and placed within a large, sealed, environmentally controlled enclosure. Five percent hydrogen peroxide was distributed throughout the enclosure using a Bioquell hydrogen peroxide vapour generator (BQ-50) for 40 min and left to reside for a further 200 min. Biological indicators were removed at 10-min intervals throughout the first 120 min of the process. The experiment was repeated for 10 and 35% hydrogen peroxide solutions. Five percent and 10% hydrogen peroxide solutions failed to achieve any reduction of MRSA, but achieved full kill of G. stearothermophilus spores at 70 and 40 min respectively. Thirty-five percent hydrogen peroxide achieved a 6-log reduction of MRSA after 30 min and full kill of G. stearothermophilus at 20 min. The concentration of 5% hydrogen peroxide within the enclosure after the 200-min dwell was measured at 9·0 ppm. This level exceeds the 15-min Short Term Exposure Limit (STEL) for hydrogen peroxide of 2·0 ppm. Users of automated hydrogen peroxide disinfection systems should review system efficacy and room re-entry protocols in light of these results. SIGNIFICANCE AND IMPACT OF THE STUDY: This research allows hospital infection control teams to consider the impact and risks of using low concentrations of hydrogen peroxide for disinfection within their facilities, and to question automated room disinfection system providers on the efficacy claims they make. The evidence that low concentration hydrogen peroxide solutions do not rapidly, autonomously break down, is in contradiction to the claims made by some hydrogen peroxide equipment providers and raises serious health and safety concerns. Facilities using hydrogen peroxide systems that claim autonomous break down of hydrogen peroxide should introduce monitoring procedures to ensure rooms are safe for re-entry and patient occupation.

Effect of Essential Oils on Germination and Growth of Some Pathogenic and Spoilage Spore-Forming Bacteria.

The use of essential oils as a food preservative has increased due to their capacity to inhibit vegetative growth of some bacteria. However, only limited data are available on their effect on bacterial spores. The aim of the present study was to evaluate the effect of some essential oils on the growth and germination of three Bacillus species and Geobacillus stearothermophilus. Essential oils were chemically analyzed using gas chromatography and gas chromatography coupled to mass spectrometry. The minimal inhibitory and bactericidal concentrations of vegetative growth and spore germination were assessed using the macrodilution method. Germination inhibitory effect of treated spores with essential oils was evaluated on solid medium, while kinetic growth was followed using spectrophotometry in the presence of essential oils. Essential oil from Drypetes gossweileri mainly composed of benzyl isothiocyanate (86.7%) was the most potent, with minimal inhibitory concentrations ranging from 0.0048 to 0.0097 mg/mL on vegetative cells and 0.001 to 0.002 mg/mL on spore germination. Furthermore, essential oil from D. gossweileri reduced 50% of spore germination after treatment at 1.25 mg/mL, and its combination with other oils improved both bacteriostatic and bactericidal activities with additive or synergistic effects. Concerning the other essential oils, the minimal inhibitory concentration ranged from 5 to 0.63 mg/mL on vegetative growth and from 0.75 to 0.09 mg/mL on the germination of spores. Spectrophotometric evaluation showed an inhibitory effect of essential oils on both germination and outgrowth. From these results, it is concluded that some of the essential oils tested might be a valuable tool for bacteriological control in food industries. Therefore, further research regarding their use as food preservatives should be carried out.

Study of the combined effect of electro-activated solutions and heat treatment on the destruction of spores of Clostridium sporogenes and Geobacillus stearothermophilus in model solution and vegetable puree.

The combined effect of heat treatment and electro-activated solution (EAS) on the heat resistance of spores of Clostridium sporogenes and Geobacillus stearothermophilus was assessed under various heating and exposure time combinations. The acid and neutral EAS showed the highest inhibitory activity, indicating that these solutions may be considered as strong sporicidal disinfectants. These EAS were able to cause a reduction of ≥6 log of spores of C. sporogenes at 60 °C in only 1 min of exposition. For G. stearothermophilus spores, a reduction of 4.5 log was observed at 60 °C in 1 min, while in 5 min, ≥7 log CFU/ml reduction was observed. Inoculated puree of pea and corn were used as a food matrix for the determination of the heat resistance of these spores during the treatments in glass capillaries. The inactivation kinetics of the spores was studied in an oil bath. Combined treatment by EAS and temperature demonstrated a significant decrease in the heat resistance of C. sporogenes. The D100°C in pea puree with NaCl solution was 66.86 min while with acid and neutral EAS it was reduced down to 3.97 and 2.19 min, respectively. The spore of G. stearothermophilus displayed higher heat resistance as confirmed by other similar studies. Its D130°C in pea puree showed a decrease from 1.45 min in NaCl solution down to 1.30 and 0.93 min for acid and neutral EAS, respectively. The differences between the spores of these species are attributable to their different sensitivities with respect to pH, Redox potential and oxygen.

Decontamination of a BSL3 laboratory by hydrogen peroxide fumigation using three different surrogates for Bacillus anthracis spores.

AIMS: Two independent trials investigated the decontamination of a BSL3 laboratory using vaporous hydrogen peroxide and compared the effect on spores of Bacillus cereus, Bacillus subtilis and Bacillus thuringiensis as surrogates for Bacillus anthracis spores, while spores of Geobacillus stearothermophilus served as control. METHODS AND RESULTS: Carriers containing 1·0 × 10(6) spores were placed at various locations within the laboratory before fumigation with hydrogen peroxide following a previously validated protocol. Afterwards, carriers were monitored by plating out samples on agar and observing enrichment in nutrient medium for up to 14 days. Three months later, the experiment was repeated and results were compared. On 98 of 102 carriers, no viable spores could be detected after decontamination, while the remaining four carriers exhibited growth of CFU only after enrichment for several days. Reduction factors between 4·0 and 6·0 log levels could be reached. CONCLUSIONS: A validated decontamination of a laboratory with hydrogen peroxide represents an effective alternative to fumigation with formaldehyde. Spores of B. cereus seem to be more resistant than those of G. stearothermophilus. SIGNIFICANCE AND IMPACT OF THE STUDY: The results of this study provide important results in the field of hydrogen peroxide decontamination when analysing the effect on spores other than those of G. stearothermophilus.

Evaluation of steam penetration and sterilization of natural latex wraps.

OBJECTIVE: To evaluate the efficacy of steam and ethylene oxide (EtO) sterilization of Vetrap™ bandages. STUDY DESIGN: Prospective experimental study. SAMPLE POPULATION: Vetrap™ bandages (n = 70; 35 as supplied by the manufacturer, 35 unwound and tightly rewound). METHODS: Vetrap™ bandage rolls (n = 60) marked with a 1 cm square were inoculated with 0.1 mL Geobacillus stearothermophilus spores, packaged in a pouch together with independent sterilization indicators and assigned into 3 sub-groups for sterilizer type: dynamic air removal, gravity displacement, and bench-top pre-vacuum and further sub-divided into 2 sterilization temperatures. Vetrap™ bandages rolls (n = 10) were inoculated with 0.1 mL Bacillus atrophaeus spores in the same manner and underwent EtO sterilization. After sterilization, the 1 cm marked square was aseptically resected to the level of the cardboard tube and enriched in a flask containing 10 mL tryptic soy broth for 24 hours at 60°C for G. stearothermophilus and 37°C for B. atrophaeus. Aliquots were subsequently plated on a Petri dish of tryptic soy agar and incubated at 60°C for G. stearothermophilus and 37°C for B. atrophaeus for 24 hours. Samples were scored positive if colonies of indicator organism were present on the nutrient agar after 24 hours. RESULTS: Three Vetrap™ bandages yielded post-sterilization growth of G. stearothermophilus: 2 from the dynamic air removal sterilizer at 134°C for 3.5 minutes, and 1 from the bench-top pre-vacuum sterilizer at 121°C for 15 minutes. After EtO sterilization, no positive samples were detected. CONCLUSIONS: Steam sterilization may be incomplete for Vetrap™ bandages whereas EtO showed complete destruction of resistant bacterial spores.

Sporicidal efficacy of genipin: a potential theoretical alternative for biomaterial and tissue graft sterilization.

Terminal sterilization of musculoskeletal allografts by gamma radiation minimizes the risk of disease transmission but impairs allograft mechanical properties. Commonly employed crosslinking agents can sterilize tissues without affecting mechanical properties adversely; however, these agents are toxic. Genipin is reported to be a benign crosslinking agent that strengthens mechanical properties of tissues; however, the antimicrobial capacity of genipin is largely unknown. The present study's aims were: (1) to assess the sporicidal potential of genipin, (2) to improve antimicrobial capacity by changing chemical and physical treatment conditions. To establish genipin's sterilization potential Bacillus subtilis var. niger spore strips were treated with 0-10% genipin in PBS or in 1:1 DMSO:PBS up to 72 h at room temperature (RT). Sterilizing doses and concentrations of genipin were used to treat B. pumilus and Geobacillus stearothermophilus spores to assess broader spectrum sporicidal activity of genipin. Scanning electron microscopy (SEM) was performed to evaluate gross morphological changes after genipin treatment. Optimal sterilization conditions were determined by evaluating the effects of temperature (RT-50 °C), DMSO:PBS ratio (0:100-100:0), and treatment duration (24-72 h) on B. subtilis. Genipin penetration of full thickness bovine patellar tendon and cortical bone specimens was observed to assess the feasibility of the agent for treating grafts. Initial studies showed that after 72 h of treatment at RT with 0.63-10% genipin/DMSO:PBS B. subtilis spore strips were sterilized; 0.63% genipin/PBS did not sterilize spore strips at 72 h at RT. Genipin doses and concentrations that sterilized B. subtilis spore strips sterilized B. pumilus and G. stearothermophilus spore strips. SEM revealed no gross morphological differences between untreated and treated spores. Treatment optimization resulted in sterilization within 24 h with 100% PBS, and DMSO facilitated sporicidal activity. Genipin penetrated full thickness patellar tendon specimens and 3.72 ± 0.58 mm in cortical bone specimens. Genipin sterilizes B. subtilis, B. pumilus, and G. stearothermophilus spore strips. It penetrates soft and hard tissues at doses previously shown to be non-toxic and to improve mechanical strength in collagen-rich soft tissues. Further studies are indicated to assess genipin's effects on the mechanical properties of genipin-sterilized grafts, the ability of genipin to eradicate infectious species other than spores, and to assess whether sterilant activity persists after penetrating tissues and biomaterials.

The inhibitory effects of vinylphosphonate-linked thymidine dimers on the unidirectional translocation of PcrA helicase along DNA: a molecular modelling study.

The PcrA DNA helicases are important bacterial enzymes and quintessential examples of molecular motors. Through conformational changes caused by ATP hydrolysis, they move along the template double helix, breaking the hydrogen bonds holding the two strands together, and separating the template chains so that the genetic information can be accessed. The flexibility of the DNA backbone is essential for the unidirectional translocation of PcrA. A modified DNA substrate with reduced backbone rotational flexibility (via an incorporated vinylphosphonate linkage) has previously been designed and tested as a helicase substrate. The results show that a single modification on the backbone is sufficient to inhibit the activity of PcrA. In this paper a range of molecular simulation methods have been applied to examine the structural origins of this inhibitory effect, as it tests our theories of the mechanism of action of this motor. We observe that the chemical modification has different effects on the energetics of DNA translocation through the protein as it reaches different sub-sites.

Comparative structural analysis of α-glucosidase inhibitors on difference species: a computational study.

Structural feature analysis of chlorogenic acid derivatives made up of varying lengths of alkyl groups as α-glucosidases inhibitors were performed by QSAR techniques. The statistically significant models derived from the study were validated by leave one out, Y-randomization and test set methods. The predictive capacity of the models was assessed by its validation parameters such as crossvalidated correlation coefficients (Q(2)), predictive residual analysis and other correlation parameters. The results obtained from the study show that the models were constructed with vsurf like properties (vsurf_ID4, vsurf_ID7 and vsurf_CW8), partial charge (Q_VSA_FNEG) and conformation dependent charged (dipoleX) descriptors. The integy moments of hydrophobicity descriptors (ID4 and ID7) are contributed for the inhibitory activity of the α-glucosidases enzymes of both the species. The vsurf_ID7 descriptor has contributed significantly (negatively) for the inhibitory activity prediction of α-glucosidases enzymes of S. cerevisiae. The partial negative charge on the surface of the molecules is detrimental for the activity, which reveals that the active site of the enzymes may have negatively charged groups. The pharmacophore analysis results also confirm the presence of hydrophilic properties on the vdW surface of the molecules. These results explain that the active sites of α-glucosidase enzymes of both the species have the same environment for the interaction. The alkyl side chain on the molecules is important for the pharmacokinetic behavior of the molecules and reduces the interaction energy of the molecules with the water. Hence, these results will be useful for designing novel molecules with multiple activities.

Spore germination based assay for monitoring antibiotic residues in milk at dairy farm.

Spore germination based assay involves the transformation of dormant spores of Bacillus stearothermophilus 953 into active vegetative cells. The inhibition of germination process specifically in presence of antibiotic residues was used as a novel approach for monitoring target contaminants in milk. The indicator organism i.e., B. stearothermophilus 953 was initially allowed to sporulate by seeding in sporulation medium and incubating at 55 °C for 18 ± 2 h. The spores exhibited a typical chain behavior as revealed through phase contrast microscopy. The minimal medium inoculated with activated spores was incubated at 64 °C for 2-3 h for germination and outgrowth in presence of specific germinant mixture containing dextrose, whey powder and skimmed milk powder added in specific ratio along with reconstituted milk as negative control and test milk samples. The change in color of the medium from purple to yellow was used as criteria for detection of antibiotic residues in milk. The efficiency of the developed assay was evaluated through a surveillance study on 228 samples of raw, pasteurized and dried milks and results were compared with AOAC approved microbial receptor assay. The presence of antibiotic level was 10.08 % at Codex maximum residual limit having false positive result only in 0.43 % of the samples. The results of the present investigation suggest that developed spore based assay can be a practical solution to dairy industry for its application at farm level, milk processing units, independent testing and R & D centres in order to comply with the legal requirements set by Codex.

Evaluation of an automated dental unit water system's contamination control protocol.

BACKGROUND: This study addresses the efficacy of an automated decontamination protocol using the germicide 'tetra acetyl ethylene diamine (TAED) perborate' (Farmec SpA, Italy). The germicide TAED perborate protocol is used in the Castellini Dental Units fitted with an Autosteril unit (an automated device that can cycle 0.26% TAED perborate solution and sterile water for cleaning the water system between patients and overnight). Prior to testing the Autosteril and the 0.26% TAED perborate protocol on the Logos Jr Dental Unit (Castellini SpA, Italy), TAED perborate was used on a dental unit water system simulation device. METHODS: A dental unit water system simulation device equipped with four dental unit water systems and with naturally grown and mature biofilm contamination was used in this study (three treatment units and one control). One treatment group used a simulated 5 minutes contact with TAED perborate and sterile water for irrigation; the second used a simulated 5 minutes contact with TAED perborate and 2 ppm ClO2 for irrigation; the third used a simulated 5 minutes contact with TAED perborate and municipal water for irrigation. The control group used municipal water for irrigation with no cleaning/disinfection protocols. This protocol was repeated for 30 cycles. Laser scanning confocal microscopy (LSCM) was used to study the effects on natural and mature biofilms, and R2A agar used to quantify heterotrophic plate counts in the effluent irrigant. Antimicrobial efficacy was evaluated by challenging TAED perborate with microbes and spores (M. smegmatis and B. subtilis). Deleterious effects of the germicide were evaluated on metal and nonmetal parts of dental unit water systems. Heterotrophic plate counts using R2A agar and LSCM of the lines were conducted to assess biofilm and microbial control. RESULTS: Baseline water samples showed mean contamination >5.6 log10 cfu/ml. After initial cleaning, all three groups maintained mean contamination levels of less than 1.1 (SD <0.3) log10 cfu/ml. LSCM of baseline samples was positive for live biofilm in all groups. At the end of the study, viable biofilm was only present in the control. In the microbial challenge test, all vegetative organisms were killed within 30 seconds of contact, while spores were killed within 5 minutes. Corrosion was seen in metals used in US-manufactured dental unit materials, while not observed in those used in the Castellini Logos Jr dental unit. CONCLUSION: In this study, the TAED perborate protocol was effective in biofilm control and control of dental treatment water contamination. Use of sterile water or 2 ppm ClO2 along with TAED treatment also controlled planktonic contamination effectively. CLINICAL SIGNIFICANCE: Environmental biofilms contaminate dental unit water systems over time and affect the quality of dental treatment water. Contaminants include environmental biofilms, microbes, including gram-negative rods and endotoxins in high doses that are not of acceptable quality for treating patients. There are many germicidal protocols for treating this contamination and one such is the prescribed use of TAED perborate used in conjunction with sterile water for irrigation in the autosteril device, an integral component of the Castellini dental units for between patient decontamination of dental unit water systems. This study was conducted on an automated simulation dental unit water system to test the TAED perborate protocol's efficacy on naturally grown, mature environmental biofilms, it's efficacy on microbes and spores and it's effects on materials used in dental unit water systems. This translational research addresses both microbial control and material effects of TAED perborate in studying efficacy and possible deleterious effects and simulated use in dentistry. Currently, this antimicrobial use protocol is followed worldwide in the Castellini dental units that are used in day-to-day dental patient care.

The search for a microbiological inhibition method for the rapid, broad-spectrum and high-throughput screening of six kinds of antibiotic residues in swine urine.

In this study, a microbiological inhibition method for rapidly screening antibiotics in swine urine was established with an easy sample pre-treatment. The microbiological system consisted of an agar medium mixed with nutrients, sensitizers, a test bacterium (Geobacillus stearothermophilus ATCC12980) and pH indicator (bromocresol purple). It was observed that the detection limits of the test kit for twenty-eight common antimicrobial residues in urine, including ß-lactams, aminoglycosides, tetracyclines, sulfonamides, macrolides, and lincosamides, were less than or equal to the maximum residue limits of the kidney, as determined by the EU and China. Moreover, the false negative rate and the false positive rate, along with other performance indexes such as interassay coefficients of variation and shelf life of the kit, all met the standard requirements of the ISO13969:2003 guidelines. Additionally, our results were consistent with those using the gold-standard physical chemistry method, which suggest the proposed method is suitable for screening antibiotic residues.

Use of a mixture of surrogates for infectious bioagents in a standard approach to assessing disinfection of environmental surfaces.

We used a mixture of surrogates (Acinetobacter baumannii, Mycobacterium terrae, hepatitis A virus, and spores of Geobacillus stearothermophilus) for bioagents in a standardized approach to test environmental surface disinfectants. Each carrier containing 10 microl of mixture received 50 microl of a test chemical or saline at 22 +/- 2 degrees C. Disinfectant efficacy criteria were > or = 6 log(10) reduction for the bacteria and the spores and > or = 3 log(10) reduction for the virus. Peracetic acid (1,000 ppm) was effective in 5 min against the two bacteria and the spores but not against the virus. Chlorine dioxide (CD; 500 and 1,000 ppm) and domestic bleach (DB; 2,500, 3,500, and 5,000 ppm) were effective in 5 min, except for sporicidal activity, which needed 20 min of contact with either 1,000 ppm of CD or the two higher concentrations of DB.

Inactivation kinetics of Geobacillus stearothermophilus spores by a peracetic acid or hydrogen peroxide fog in comparison to the liquid form.

The aim of this study was to compare the sporicidal effect of the disinfectants peracetic acid (PAA) or hydrogen peroxide (H2O2) applied as a fog or as a liquid. The efficacy of fogging of the disinfectants was tested in a closed isolator cabinet using highly heat and chemical-resistant spores of Geobacillus stearothermophilus. Fogging of a 0.06% solution of PAA resulted in over 5-log reduction of spores in 10 min, whereas for PAA used in liquid form the same reduction was achieved in 4.5 min. The inactivation curves for fog and liquid were fitted using three different models (Linear with shoulder, Weibull, Gauss-Eyring). This showed a shoulder for the fog with an estimated length of 4.1 min, but the D values, calculated for the linear parts of the curves, were not significantly different (1.1 and 0.8 min for the PAA fog and solution, respectively). Similar results were obtained for a 12% H2O2 solution, albeit that H2O2 was less effective compared to PAA, requiring 60 min to reach 3-log reduction when applied as a fog, with an estimated shoulder of 18.5 min. Fogging of a 0.06% peracetic acid solution effectively inactivated G. stearothermophilus spores. Overall, the data show that fogging can be an effective method of applying disinfectants but that a shoulder in the inactivation curves should be considered in process design. This study provides inactivation kinetics for disinfection using PAA or H2O2-based fog, which can aid in selection and validation of process parameters for disinfection of contained areas by fogging.

Evaluation of a pulsed xenon ultraviolet light device for reduction of pathogens with biofilm-forming ability and impact on environmental bioburden in clinical laboratories.

BACKGROUND: Biofilm-forming organisms can persist on surfaces in hospital clinical laboratories and potentially lead to nosocomial infections. Therefore, effective decontamination procedures are essential for reducing infections. In this study, we investigated an alternative to often ineffective manual cleaning methods, a pulsed xenon ultraviolet (PX-UV) light device. We evaluated PX-UV effect on biofilm formation ability of pathogens and also evaluated PX-UV effectiveness on environmental bioburden in clinical laboratories. METHODS: We selected and identified P. aeruginosa PA47, Staphylococcus aureus B1, and K. pnenumoniae CR52 from clinic isolates. Biofilm-forming ability and effectiveness of PX-UV in killing these biofilm forming strains on surfaces was evaluated. The central laboratory, the clinical microbiology laboratory, and the clinical immunology laboratory were chosen for testing environmental bioburden. Air samples and high-touch surface specimens in the three laboratories were obtained before and after routine manual cleaning, and after 6 min of PX-UV disinfection. The cultured microbes were then identified with MALDI- TOF-MS. RESULTS: We found that P. aeruginosa PA47, Staphylococcus aureus B1, and K. pnenumoniae CR52 were able to form robust biofilms, and that PX-UV significantly reduced colony counts of these strains on all surfaces tested. PX-UV reduced the bioburden of air samples and eliminated bioburden on surfaces. All microbes identified in the clinical laboratories were pathogenic and consisted of cocci, rods, and fungi. CONCLUSIONS: The PX-UV device effectively reduced pathogens with biofilm-forming ability on surfaces, and the environmental bioburden was also significantly reduced by PX-UV. PX-UV is a viable option for protecting staff and decreasing rates of laboratory-acquired infections.