Additive Manufacturing of SmartEx QD 100 Designed Oral Three-Dimensional Printlets Containing Isoniazid for Immediate Gastric Release by Selective Laser Sintering.

The selection of appropriate materials and compatibility of selected materials with drugs and formulations are limiting steps in three-dimensional printing technology. In this study, SmartEx QD 100 (SM QD 100) was introduced as a novel, coprocessed, unexplored excipient that can be used in SLS-mediated 3D printing. The current study aimed to evaluate the feasibility of fabricating SM QD 100 containing INH-embedded SLS-mediated immediate gastric release tablets. The prepared physical mixtures were subjected to the fabrication of 3D printlets by using SLS-mediated 3D printing. The fabricated 3D printlets were subjected to physicochemical characterization by using various analytical techniques. After oral administration of sintered 3D printlets to rabbits, samples were collected and pharmacokinetic parameters were analyzed using the developed LC-APCI-MS/MS method. The optimized batch was able to release 100% INH within 15 min, which confirmed the immediate gastric release. Similarly, sintered 3D printlets were stable under accelerated stability conditions for three months. Finally, the pharmacokinetic parameters revealed the rate and extent of absorption of INH from sintered 3D printlets. As evidenced by in vitro and in vivo analyses, SM QD 100 was able to sinter SLS-mediated INH-embedded stable immediate gastric release tablets. SM QD 100 is a novel material for SLS-mediated 3D printing in pharmaceutical applications.

Multifunctional Fe/Cu Dual-Single Atom Nanozymes with Enhanced Peroxidase Activity for Isoniazid Detection and Levofloxacin Degradation.

The design of single-atom nanozymes with dual active sites to increase their activity and for the detection and degradation of contaminants is rare and challenging. In this work, a single-atom nanozyme (FeCu-NC) based on a three-dimensional porous Fe/Cu dual active site was developed as a colorimetric sensor for both the quantitative analysis of isoniazid (INH) and the efficient degradation of levofloxacin (LEV). FeCu-NC was synthesized using a salt template and freeze-drying method with a three-dimensional hollow porous structure and dual active sites (Fe-Nx and Cu-Nx). In terms of morphology and structure, FeCu-NC exhibits excellent peroxidase-like activity and catalytic properties. Therefore, a colorimetric sensor was constructed around FeCu-NC for sensitive and rapid quantitative analysis of INH with a linear range of 0.9-10 µM and a detection limit as low as 0.3 µM, and the sensor was successfully applied to the analysis of INH in human urine. In addition, FeCu-NC promoted the efficient degradation of LEV by peroxymonosulfate activation, with a degradation rate of 90.4% for LEV at 30 min. This work sheds new light on the application of single-atom nanozymes to antibiotics for colorimetric sensing and degradation.

Unravelling performance of honeycomb structures as drug delivery systems for the isoniazid drug using DFT-D3 correction dispersion and molecular dynamic simulations.

In this study, the potential of aluminum nitride (h-AlN), boron nitride (h-BN) and silicon carbide (h-SiC) nanosheets as the drug delivery systems (DDS) of isoniazid (INH) was scrutinized through density functional theory (DFT) and molecular dynamic (MD) simulations. We performed DFT periodic calculations on the geometry and electronic features of nanosheets adsorbed with INH by the DFT functional (DZP/GGA-PBE) employed in the SIESTA code. In the energetically favorable model, an oxygen atom of the C-O group of the INH molecule interacts with a Si atom of the h-SiC at 2.077 Å with an interaction energy of -1.361 eV. Charge transfer (CT) calculation by employing the Mulliken, Hirshfeld and Voronoi approaches reveals that the monolayers and drug molecules act as donors and acceptors, respectively. The density of states (DOS) calculations indicate that the HOMO-LUMO energy gap (HLG) of the h-SiC nanosheet declines significantly from 2.543 to 1.492 eV upon the adsorption of the INH molecule, which causes an electrical conductivity increase and then produces an electrical signal. The signal is linked to the existence of INH, demonstrating that h-SiC may be an appropriate sensor for INH sensing. The decrease in HLG for the interaction of INH and h-SiC is the uppermost (up to 41%) representing the uppermost sensitivity, whereas the sensitivity trend is σ(h-SiC) > σ(h-AlN) > σ(h-BN). Quantum theory of atoms in molecules (QTAIM) investigations is employed to scrutinize the nature of the INH/nanosheet interactions. The QTAIM analysis reveals that the interaction of the INH molecule and h-SiC has a partially covalent nature, while INH/h-AlN model electrostatic interaction occurs in the system and noncovalent and electrostatic interaction for the INH/h-BN model. Finally, the state-of-the-art DFT-MD simulations utilized in this study can mimic ambient conditions. The results obtained from the MD simulation show that it takes more time to bond the INH drug and h-SiC, and the INH/h-SiC system becomes stable. The results of the current research demonstrate the potential of h-SiC as a suitable sensor and drug delivery platform for INH drugs to remedy tuberculosis.

Permeability of TB drugs through the mycolic acid monolayer: a tale of two force fields.

Tuberculosis (TB) treatment becomes challenging due to the unique cell wall structure of Mycobacterium tuberculosis (M. tb). Among various components of the M.tb cell wall, mycolic acid (MA) is of particular interest because it is speculated to exhibit extremely low permeability for most of the drug molecules, thus helping M.tb to survive against medical treatment. However, no quantitative assessment of the thermodynamic barrier encountered by various well-known TB drugs in the mycolic acid monolayer has been performed so far using computational tools. On this premise, our present work aims to probe the permeability of some first and second line TB drugs, namely ethambutol, ethionamide, and isoniazid, through the modelled mycolic acid monolayer, using molecular dynamics (MD) simulation with two sets of force field (FF) parameters, namely GROMOS 54A7-ATB (GROMOS) and CHARMM36 (CHARMM) FFs. Our findings indicate that both FFs provide consistent results in terms of the mode of drug-monolayer interactions but significantly differ in the drug permeability through the monolayer. The mycolic acid monolayer generally exhibited a higher free energy barrier of crossing with CHARMM FF, while with GROMOS FF, better stability of drug molecules on the monolayer surface was observed, which can be attributed to the greater electrostatic potential at the monolayer-water interface, found for the later. Although both the FF parameters predicted the highest resistance against ethambutol (permeability values of 8.40 × 10-34 cm s-1 and 9.61 × 10-31 cm s-1 for the CHARMM FF and the GROMOS FF, respectively), results obtained using GROMOS were found to be consistent with the water solubility of drugs, suggesting it to be a slightly better FF for modelling drug-mycolic acid interactions. Therefore, this study enhances our understanding of TB drug permeability and highlights the potential of the GROMOS FF in simulating drug-mycolic acid interactions.

Novel isoniazid-hydrazone derivatives induce cell growth inhibition, cell cycle arrest and apoptosis via mitochondria-dependent caspase activation and PI3K/AKT inhibition.

In this study, seven isoniazid-hydrazone derivatives (3a-g) were synthesized and their structures elucidated by chromatographic techniques, and then the antiproliferative effects of these compounds on various cancer cells were tested. The advanced anticancer mechanism of the most potent compound was then investigated. Antiproliferative activities of the synthesized compounds were evaluated on human breast cancer MCF-7, lung cancer A-549, colon cancer HT-29, and non-cancerous mouse fibroblast 3T3-L1 cell lines by XTT assay. Flow cytometry analysis were carried out to determine cell cycle distribution, apoptosis, mitochondrial membrane potential, multi-caspase activity, and expression of PI3K/AKT signaling pathway. The XTT results showed that all the title molecules displayed cytotoxic activity at varying strengths in different dose ranges, and among them, the strongest cytotoxic effect and high selectivity were exerted by 3d against MCF-7 cells with the IC50 value of 11.35 µM and selectivity index of 8.65. Flow cytometry results revealed that compound 3d induced apoptosis through mitochondrial membrane disruption and multi-caspase activation in MCF-7 cells. It also inhibited the cell proliferation via inhibition of expression of PI3K/AKT and arrested the cell cycle at G0/G1 phase. In conclusion, all these data disclosed that among the synthesized compounds, 3d is notable for in vivo anticancer studies.

Design and Synthesis of Isatin-Tagged Isoniazid Conjugates with Cogent Antituberculosis and Radical Quenching Competence: In-vitro and In-silico Evaluations.

In pursuit of potential chemotherapeutic alternates to combat severe tuberculosis infections, novel heterocyclic templates derived from clinically approved anti-TB drug isoniazid and isatin have been synthesized that demonstrate potent inhibitory action against Mycobacterium tuberculosis, and compound 4i with nitrophenyl motif exhibited the highest anti-TB efficacy with a MIC value of 2.54 µM/ml. Notably, the same nitro analog 4i shows the best antioxidant efficacy among all the synthesized compounds with an IC50 value of 37.37 µg/ml, suggesting a synergistic influence of antioxidant proficiency on the anti-TB action. The titled compounds exhibit explicit binding affinity with the InhA receptor. The befitting biochemical reactivity and near-appropriate pharmacokinetic proficiency of the isoniazid conjugates is reflected in the density functional theory (DFT) studies and ADMET screening. The remarkable anti-TB action of the isoniazid cognates with marked radical quenching ability may serve as a base for developing multi-target medications to confront drug-resistant TB pathogens.

Experimental and Computational Studies on the Interaction of DNA with Hesperetin Schiff Base CuII Complexes.

The interactions with calf thymus DNA (CT-DNA) of three Schiff bases formed by the condensation of hesperetin with benzohydrazide (HHSB or L1H3), isoniazid (HIN or L2H3), or thiosemicarbazide (HTSC or L3H3) and their CuII complexes (CuHHSB, CuHIN, and CuHTSC with the general formula [CuLnH2(AcO)]) were evaluated in aqueous solution both experimentally and theoretically. UV-Vis studies indicate that the ligands and complexes exhibit hypochromism, which suggests helical ordering in the DNA helix. The intrinsic binding constants (Kb) of the Cu compounds with CT-DNA, in the range (2.3-9.2) × 106, from CuHTSC to CuHHSB, were higher than other copper-based potential drugs, suggesting that π-π stacking interaction due to the presence of the aromatic rings favors the binding. Thiazole orange (TO) assays confirmed that ligands and Cu complexes displace TO from the DNA binding site, quenching the fluorescence emission. DFT calculations allow for an assessment of the equilibrium between [Cu(LnH2)(AcO)] and [Cu(LnH2)(H2O)]+, the tautomer that binds CuII, amido (am) and not imido (im), and the coordination mode of HTSC (O-, N, S), instead of (O-, N, NH2). The docking studies indicate that the intercalative is preferred over the minor groove binding to CT-DNA with the order [Cu(L1H2am)(AcO)] > [Cu(L2H2am)(AcO)] ≈ TO ≈ L1H3 > [Cu(L3H2am)(AcO)], in line with the experimental Kb constants, obtained from the UV-Vis spectroscopy. Moreover, dockings predict that the binding strength of [Cu(L1H2am)(AcO)] is larger than [Cu(L1H2am)(H2O)]+. Overall, the results suggest that when different enantiomers, tautomers, and donor sets are possible for a metal complex, a computational approach should be recommended to predict the type and strength of binding to DNA and, in general, to macromolecules.

Evaluating the Impact of the Tyr158 pKa on the Mechanism and Inhibition of InhA, the Enoyl-ACP Reductase from Mycobacterium tuberculosis.

InhA, the Mycobacterium tuberculosis enoyl-ACP reductase, is a target for the tuberculosis (TB) drug isoniazid (INH). InhA inhibitors that do not require KatG activation avoid the most common mechanism of INH resistance, and there are continuing efforts to fully elucidate the enzyme mechanism to drive inhibitor discovery. InhA is a member of the short-chain dehydrogenase/reductase superfamily characterized by a conserved active site Tyr, Y158 in InhA. To explore the role of Y158 in the InhA mechanism, this residue has been replaced by fluoroTyr residues that increase the acidity of Y158 up to ∼3200-fold. Replacement of Y158 with 3-fluoroTyr (3-FY) and 3,5-difluoroTyr (3,5-F2Y) has no effect on kcatapp/KMapp nor on the binding of inhibitors to the open form of the enzyme (Kiapp), whereas both kcatapp/KMapp and Kiapp are altered by seven-fold for the 2,3,5-trifluoroTyr variant (2,3,5-F3Y158 InhA). 19F NMR spectroscopy suggests that 2,3,5-F3Y158 is ionized at neutral pH indicating that neither the acidity nor ionization state of residue 158 has a major impact on catalysis or on the binding of substrate-like inhibitors. In contrast, Ki*app is decreased 6- and 35-fold for the binding of the slow-onset inhibitor PT504 to 3,5-F2Y158 and 2,3,5-F3Y158 InhA, respectively, indicating that Y158 stabilizes the closed form of the enzyme adopted by EI*. The residence time of PT504 is reduced ∼four-fold for 2,3,5-F3Y158 InhA compared to wild-type, and thus, the hydrogen bonding interaction of the inhibitor with Y158 is an important factor in the design of InhA inhibitors with increased residence times on the enzyme.

One-Pot Synthesis and in Silico Molecular Docking Studies of Arylselanyl Hydrazides as Potential Antituberculosis Agents.

The present study reports a simple two-step method for the synthesis of arylselanyl hydrazide derivatives using hypophosphorous acid and polyethylene glycol (H3 PO2 /PEG-400) as an alternative reducing system and hydrazine hydrate (NH2 NH2 ⋅xH2 O/50-60 %). This single-vessel procedure was employed with methyl acrylate 2a and methyl bromoacetate 2b using diaryl diselenides to generate the nucleophile species to produce, respectively, 3-(arylselanyl)propane-hydrazides 4a-e and 2-(arylselanyl)acetohydrazides 5a-e with good yields by accelerating the reduction of -Se-Se- bond, when compared to available methods. The synthesized molecules are structurally similar to the isoniazid (INH). Therefore, we perform in silico molecular docking studies, using the lactoperoxidase enzyme, in order to verify whether the INH Se derivatives could interact in a similar way to INH at the active site of the mammalian enzyme. The in silico results indicated a similar type of interaction of the arylselanyl hydrazide derivatives with that of INH. In view of the similar in silico interaction of the selenium derivatives of INH, the arylselanyl hydrazide derivatives reported here should be tested against Mycobacterium tuberculosis in vitro.

Development and Optimization of a New UPLC-UV/MS Method through DoE and MLR for Detecting Substandard Drug Products to Treat Tuberculosis.

Drug products used for treating tuberculosis are one of the most widely reported medicines to be classified as falsified or substandard in low- and middle-income countries, representing a major hazard to health. The aim of this study was, firstly, to develop an ultra-performance liquid chromatography (UPLC) method which is able to analyze fixed combination tablets with up to four active pharmaceutical ingredients, including isoniazid, pyrazinamide, rifampicin, and ethambutol. Secondly, we aimed to optimize it through the design of experiments and multi-linear regression based on a central composite design and to validate it according to the guidelines of the International Conference on Harmonization. The application of this tools enabled the identification of the influential factors (flow rate, formic acid, and temperature) and their effects on the studied responses (retention factor and percentage for each drug) as part of the quality by design approach. The method proved to be to be linear in the range from 5.0 to 15 µg/mL for isoniazid, pyrazinamide, and rifampicin, being precise (<1%) and accurate (97−101%). In addition, the method validated for ethambutol proved to be linear from 1.4 to 4.2 µg/mL, as well as precise (0.54%) and accurate (97.3%). The method was stability indicated for all the active pharmaceutical ingredients studied and was able to detect two substandard formulations sampled on the African market.

A trio of quinoline-isoniazid-phthalimide with promising antiplasmodial potential: Synthesis, in-vitro evaluation and heme-polymerization inhibition studies.

Quinoline-isoniazid-phthalimide triads have been synthesised to assess their antiplasmodial efficacy and cytotoxicity against chloroquine-resistant W2 strain of P. falciparum and Vero cells, respectively. Most of the synthesized compounds displayed IC50 in lower nM range and appeared to be approximately five to twelve fold more active than chloroquine. Heme-binding studies were also carried out to delineate the mode of action. The promising compounds with IC50s in range of 11-30 nM and selectivity index >2800, may act as promising template for the design of new antiplasmodials.

Superfast Synthesis of Stabilized Silver Nanoparticles Using Aqueous Allium sativum (Garlic) Extract and Isoniazid Hydrazide Conjugates: Molecular Docking and In-Vitro Characterizations.

Green synthesis of silver nanoparticles (AgNPs) was synthesized from fresh garlic extract coupled with isoniazid hydrazide (INH), a commonly used antibiotic to treat tuberculosis. A molecular docking study conducted with the selected compounds compared with anthranilate phosphoribosyltransferase (trpD) from Mycobacterium tuberculosis. The aqueous extract of garlic was prepared and mixed with silver nitrate (AgNO3) solution for the superfast synthesis of stable AgNPs. INH was then conjugated with AgNPs at different ratios (v/v) to obtain stable INH-AgNPs conjugates (AgNCs). The resulting AgNCs characterized by FTIR spectra revealed the ultrafast formation of AgNPs (<5 s) and perfectly conjugated with INH. The shifting of λmax to longer wavelength, as found from UV spectral analysis, confirmed the formation of AgNCs, among which ideal formulations (F7, F10, and F13) have been pre-selected. The zeta particle size (PS) and the zeta potential (ZP) of AgNPs were found to be 145.3 ± 2.1 nm and -33.1 mV, respectively. These data were significantly different compared to that of AgNCs (160 ± 2.7 nm and -14.4 mV for F7; 208.9 ± 2.9 nm and -19.8 mV for F10; and 281.3 ± 3.6 nm and -19.5 mV for F13), most probably due to INH conjugation. The results of XRD, SEM and EDX confirmed the formation of AgNCs. From UV spectral analysis, EE of INH as 51.6 ± 5.21, 53.6 ± 6.88, and 70.01 ± 7.11 %, for F7, F10, and F13, respectively. The stability of the three formulations was confirmed in various physiological conditions. Drug was released in a sustainable fashion. Besides, from the preferred 23 compounds, five compounds namely Sativoside R2, Degalactotigonin, Proto-desgalactotigonin, Eruboside B and Sativoside R1 showed a better docking score than trpD, and therefore may help in promoting anti-tubercular activity.

Microencapsulated Isoniazid-Loaded Metal-Organic Frameworks for Pulmonary Administration of Antituberculosis Drugs.

Tuberculosis (TB) is an infectious disease that causes a great number of deaths in the world (1.5 million people per year). This disease is currently treated by administering high doses of various oral anti-TB drugs for prolonged periods (up to 2 years). While this regimen is normally effective when taken as prescribed, many people with TB experience difficulties in complying with their medication schedule. Furthermore, the oral administration of standard anti-TB drugs causes severe side effects and widespread resistances. Recently, we proposed an original platform for pulmonary TB treatment consisting of mannitol microspheres (Ma MS) containing iron (III) trimesate metal-organic framework (MOF) MIL-100 nanoparticles (NPs). In the present work, we loaded this system with the first-line anti-TB drug isoniazid (INH) and evaluated both the viability and safety of the drug vehicle components, as well as the cell internalization of the formulation in alveolar A549 cells. Results show that INH-loaded MOF (INH@MIL-100) NPs were efficiently microencapsulated in Ma MS, which displayed suitable aerodynamic characteristics for pulmonary administration and non-toxicity. MIL-100 and INH@MIL-100 NPs were efficiently internalized by A549 cells, mainly localized in the cytoplasm. In conclusion, the proposed micro-nanosystem is a good candidate for the pulmonary administration of anti-TB drugs.

Synthesis, Characterization and Biological Evaluation of New 3,5-Disubstituted-Pyrazoline Derivatives as Potential Anti-Mycobacterium tuberculosis H37Ra Compounds.

A total of fourteen pyrazoline derivatives were synthesized through cyclo-condensation reactions by chalcone derivatives with different types of semicarbazide. These compounds were characterized by IR, 1D-NMR (1H, 13C and Distortionless Enhancement by Polarization Transfer - DEPT-135) and 2D-NMR (COSY, HSQC and HMBC) as well as mass spectroscopy analysis (HRMS). The synthesized compounds were tested for their antituberculosis activity against Mycobacterium tuberculosis H37Ra in vitro. Based on this activity, compound 4a showed the most potent inhibitory activity, with a minimum inhibitory concentration (MIC) value of 17 µM. In addition, six other synthesized compounds, 5a and 5c-5g, exhibited moderate activity, with MIC ranges between 60 µM to 140 µM. Compound 4a showed good bactericidal activity with a minimum bactericidal concentration (MBC) value of 34 µM against Mycobacterium tuberculosis H37Ra. Molecular docking studies for compound 4a on alpha-sterol demethylase was done to understand and explore ligand-receptor interactions, and to hypothesize potential refinements for the compound.

Effect of Liposome-Encapsulated Dextrazide on Local Regulation of Extracellular Matrix Metabolism in Liver and Lungs of Mice with during Chronic BCG-Induced Granulomatosis.

The liposomal form of isonicotinic acid hydrazide conjugate with oxidized dextran (liposomeencapsulated dextrazide, LEDZ) injected intraperitoneally for 3 months to BALB/c mice with chronic BCG-induced granulomatosis (6 month after infection) down-regulated activities of protease (MMP) and antiprotease (TIMP-1, TIMP-2, α2-macroglobulin) components of the regulation system, which indicates a drop of destructive and inflammatory potential of BCGinduced granulomatosis. The persistent enhanced hyaluronidase activity in the liver and its reduced (normalized to control level) activity in the lungs after administration of LEDZ indicates a greater hydrolysis of hyaluronan in the liver than in the lungs. LEDZ-induced changes in MMP/TIMP system in mouse liver and lungs are characterized with relative elevation of protease activity over that of antiprotease one.

Content of the Major Extracellular Matrix Components of the Liver and Lungs in Mice with Chronic BCG-Granulomatosis Treated with Liposome-Encapsulated Dextrazide.

Administration of the liposome-encapsulated dextrazide (LEDZ) to mice 6 months after infection with mycobacterium BCG vaccine for 3 months modulated metabolism of collagens and the intensity of fibrosis of internal organs. In the liver, we observed a redistribution of glycosaminoglycans towards sulfated forms, a decrease in the content of hyaluronan, a change in the ratio of hydroxyproline fractions indicating a decrease in fibrosis via two mechanisms: suppression of synthesis and increased degradation of collagens. In the lungs, administration of LEDZ did not affect the content of sulfated glycosaminoglycans, but significantly reduced the content of hyaluronan, stimulated degradation of collagen, and reduced its synthesis, but these processes were insufficient for significant reduction of fibrotic complications in the lungs. In animals treated with LEDZ, the decrease in collagen synthesis in the liver was 2-fold more pronounced than in the lungs.

Design and synthesis of 4-Aminoquinoline-isoindoline-dione-isoniazid triads as potential anti-mycobacterials.

A series of 4-aminoquinoline-isoindoline-dione-isoniazid triads were synthesized and assessed for their anti-mycobacterial activities and cytotoxicity. Most of the synthesized compounds exhibited promising activities against the mc26230 strain of M. tuberculosis with MIC in the range of 5.1-11.9 µM and were non-cytotoxic against Vero cells. The conjugates lacking either isoniazid or quinoline core in their structural framework failed to inhibit the growth of M. tuberculosis; thus, further strengthening the proposed design of triads in the present study.

Structure elaboration of isoniazid: synthesis, in silico molecular docking and antimycobacterial activity of isoniazid-pyrimidine conjugates.

Designing small molecule-based new drug candidates through structure modulation of the existing drugs has drawn considerable attention in view of inevitable emergence of resistance. A new series of isoniazid-pyrimidine conjugates were synthesized in good yields and evaluated for antitubercular activity against the H37Rv strain of Mycobacterium tuberculosis using the microplate Alamar Blue assay. Structure-anti-TB relationship profile revealed that conjugates 8a and 8c bearing a phenyl group at C-6 of pyrimidine scaffold were most active (MIC99 10 µM) and least cytotoxic members of the series. In silico docking of 8a in the active site of bovine lactoperoxidase as well as a cytochrome C peroxidase mutant N184R Y36A revealed favorable interactions similar to the heme enzyme catalase peroxidase (KatG) that activates isoniazid. This investigation suggests a rationale for further work on this promising series of antitubercular agents.

Cyto-genotoxic evaluation of novel anti-tubercular copper (II) complexes containing isoniazid-based ligands.

Considering the promising previous results of Cu (II) complexes with isoniazid active ligand against Mycobacterium tuberculosis, the main causative agent of tuberculosis, novel biological assays evaluating its toxicogenic potential were performed to ensure the safe use. The genotoxicity/mutagenicity of the complexes CuCl2(INH)2.H2O (I1), Cu(NCS)2(INH)2.5H2O (I2) and Cu(NCO)2(INH)2.4H2O (I3) was evaluated by the Comet, Micronucleus-cytome and Salmonella microsome (Ames test) assays. The cell viability using resazurin assay indicated that I1, I2 e I3 had moderate to low capacity to reduce the viability of colorectal cells (Caco-2), liver cells (HepG2), lung cells (GM 07492-A and A549) and endothelial cells (HU-VE-C). On genotoxicity/mutagenicity, I1 complex did not induce sizable levels of DNA damage in HepG2 cells (Comet assay), and gene (Ames test) and chromosomal (Micronucleus-cytome assay) mutations. Already, I2 and I3 complexes were considered mutagenic in the highest concentrations used. In light of the above, these results contribute to valuable data on the safe use of Cu(II) complexes. Considering the absence of mutagenicity and cytotoxicity of I1, this complex is a potential candidate for the development of a new drug to the treatment tuberculosis, while I2 and I3 require caution in its use.

Design and optimization of a child-friendly dispersible tablet containing isoniazid, pyrazinamide, and rifampicin for treating tuberculosis in pediatrics.

Objective: Develop a child-friendly Fixed Dose Combination (FDC) water-dispersible tablet for Tuberculosis (TB) treatment, with 50, 150, and 75 mg of isoniazid, pyrazinamide and rifampicin respectively. This new formulation must contain the lowest number of excipients accepted for pediatrics and fulfill all the pharmacopeia requirements.Significance: At present, there is no adequate market dosage form available for children. There is, however, one in a prequalification phase by the World Health Organization but its composition contains excipients which may not be suitable for pediatrics. Therefore, this new formulation would cover this therapeutic gap.Methods: A factorial design, based on three quantitative factors (compression force and concentration of AcDiSol® and Explosol®) at three levels each, was performed to elucidate their influence over disintegration time and friability. In addition, the influence of the press speed on disintegration time, friability, tensile strength, fineness of dispersion and content uniformity over the target tablet was tested. A stability test was done following ICH guideline for accelerated conditions.Results: Tablets developed with 9% w/w of Explosol® and a compression force of 16 kN disintegrated in less than 3 min and showed a friability below 1% when 15-mm punches were used. The tableting process could be done up to 25 and 50 cycles/minute ensuring good quality attributes when 15 and 12-mm punches were used, respectively. All APIs remained inside the limit of ± 5% of drug content till 6 months of storage.Conclusion: A high-quality child-friendly FDC water-dispersible tablet was developed improving the treatment of TB in pediatric.