Basic components of connective tissues and extracellular matrix: elastin, fibrillin, fibulins, fibrinogen, fibronectin, laminin, tenascins and thrombospondins.

Collagens are the most abundant components of the extracellular matrix and many types of soft tissues. Elastin is another major component of certain soft tissues, such as arterial walls and ligaments. Many other molecules, though lower in quantity, function as essential components of the extracellular matrix in soft tissues. Some of these are reviewed in this chapter. Besides their basic structure, biochemistry and physiology, their roles in disorders of soft tissues are discussed only briefly as most chapters in this volume deal with relevant individual compounds. Fibronectin with its muldomain structure plays a role of "master organizer" in matrix assembly as it forms a bridge between cell surface receptors, e.g., integrins, and compounds such collagen, proteoglycans and other focal adhesion molecules. It also plays an essential role in the assembly of fibrillin-1 into a structured network. Laminins contribute to the structure of the extracellular matrix (ECM) and modulate cellular functions such as adhesion, differentiation, migration, stability of phenotype, and resistance towards apoptosis. Though the primary role of fibrinogen is in clot formation, after conversion to fibrin by thrombin, it also binds to a variety of compounds, particularly to various growth factors, and as such fibrinogen is a player in cardiovascular and extracellular matrix physiology. Elastin, an insoluble polymer of the monomeric soluble precursor tropoelastin, is the main component of elastic fibers in matrix tissue where it provides elastic recoil and resilience to a variety of connective tissues, e.g., aorta and ligaments. Elastic fibers regulate activity of TGFßs through their association with fibrillin microfibrils. Elastin also plays a role in cell adhesion, cell migration, and has the ability to participate in cell signaling. Mutations in the elastin gene lead to cutis laxa. Fibrillins represent the predominant core of the microfibrils in elastic as well as non-elastic extracellular matrixes, and interact closely with tropoelastin and integrins. Not only do microfibrils provide structural integrity of specific organ systems, but they also provide a scaffold for elastogenesis in elastic tissues. Fibrillin is important for the assembly of elastin into elastic fibers. Mutations in the fibrillin-1 gene are closely associated with Marfan syndrome. Fibulins are tightly connected with basement membranes, elastic fibers and other components of extracellular matrix and participate in formation of elastic fibers. Tenascins are ECM polymorphic glycoproteins found in many connective tissues in the body. Their expression is regulated by mechanical stress both during development and in adulthood. Tenascins mediate both inflammatory and fibrotic processes to enable effective tissue repair and play roles in pathogenesis of Ehlers-Danlos, heart disease, and regeneration and recovery of musculo-tendinous tissue. One of the roles of thrombospondin 1 is activation of TGFß. Increased expression of thrombospondin and TGFß activity was observed in fibrotic skin disorders such as keloids and scleroderma. Cartilage oligomeric matrix protein (COMP) or thrombospondin-5 is primarily present in the cartilage. High levels of COMP are present in fibrotic scars and systemic sclerosis of the skin, and in tendon, especially with physical activity, loading and post-injury. It plays a role in vascular wall remodeling and has been found in atherosclerotic plaques as well.

Different collagen types define two types of idiopathic epiretinal membranes.

AIMS: To identify differences in extracellular matrix contents between idiopathic epiretinal membranes (IEM) of cellophane macular reflex (CMRM) or preretinal macular fibrosis (PMFM) type. METHODS AND RESULTS: Idiopathic epiretinal membranes were analysed by light and quantitative transmission electron microscopy, immunohistochemistry and Western blotting. Substantial differences between CMRM and PMFM were observed regarding the nature of extracellular fibrils. In CMRM the fibrils were thin, with diameters between 6 and 15 nm. Between the fibrils, aggregates of long-spacing collagen were observed. In PMFM the diameters of fibrils measured either 18-26 or 36-56 nm. Using immunogold electron microscopy, 6-15 nm fibrils in CMRM were labelled for collagen type VI, while the fibrils in PMFM remained unstained. Using Western blotting and immunohistochemistry, a strong signal for collagen type VI was observed in all CMRM, while immunoreactivity was weak or absent in PMFM. In contrast, PMFM showed immunoreactivity for collagen types I and II, which was weak or absent in CMRM. Both types of membranes showed immunoreactivity for collagen types III and IV, laminin and fibronectin with similar intensity. CONCLUSION: The presence of high amounts of collagen type VI in CMRM and the relative absence of collagen types I and II is the major structural difference to PMFM.

Dynamics of the lens basement membrane capsule and its interaction with connective tissue-like extracapsular matrix proteins.

The lens, suspended in the middle of the eye by tendon-like ciliary zonule fibers and facing three different compartments of the eye, is enclosed in what has been described as the thickest basement membrane in the body. While the protein components of the capsule have been a subject of study for many years, the dynamics of capsule formation, and the region-specific relationship of its basement membrane components to one another as well as to other matrix molecules remains to be explored. Through high resolution confocal and super-resolution imaging of the lens capsule and 3D surface renderings of acquired z-stacks, our studies revealed that each of its basement membrane proteins, laminin, collagen IV, nidogen and perlecan, has unique structure, organization, and distribution specific both to the region of the lens that the capsule is located in and the position of the capsule within the eye. We provide evidence of basal membrane gradients across the depth of the capsule as well as the synthesis of distinct basement membrane lamella within the capsule. These distinctions are most prominent in the equatorial capsule zone where collagen IV and nidogen span the capsule depth, while laminin and perlecan are located in two separate lamellae located at the innermost and outermost capsule domains. We discovered that an extracapsular matrix compartment rich in the connective tissue-like matrix molecules fibronectin, tenascin-C, and fibrillin is integrated with the superficial surface of the lens capsule. Each matrix protein in this extracapsular zone also exhibits region-specific distribution with fibrils of fibrillin, the matrix protein that forms the backbone of the ciliary zonules, inserting within the laminin/perlecan lamella at the surface of the equatorial lens capsule.

Terminal short arm domains of basement membrane laminin are critical for its self-assembly.

Laminin self-assembles into large polymers by a cooperative two-step calcium-dependent mechanism (Yurchenco, P. D., E. C. Tsilibary, A. S. Charonis, and H. Furthmayr. 1985. J. Biol. Chem. 260:7636-7644). The domain specificity of this process was investigated using defined proteolytically generated fragments corresponding to the NH2-terminal globule and adjacent stem of the short arm of the B1 chain (E4), a complex of the two short arms of the A and B2 chains attached to the proximal stem of a third short arm (E1'), a similar complex lacking the globular domains (P1'), and the distal half of the long arm attached to the adjacent portion of the large globule (E8). Polymerization, followed by an increase of turbidity at 360 nm in neutral isotonic TBS containing CaCl2 at 35 degrees C, was quantitatively inhibited in a concentration-dependent manner with laminin fragments E4 and E1' but not with fragments E8 and P1'. Affinity retardation chromatography was used for further characterization of the binding of laminin domains. The migration of fragment E4, but not of fragments E8 and P1', was retarded in a temperature- and calcium-dependent fashion on a laminin affinity column but not on a similar BSA column. These data are evidence that laminin fragments E4 and E1' possess essential terminal binding domains for the self-aggregation of laminin, while fragments E8 and P1' do not. Furthermore, the individual domain-specific interactions that contribute to assembly are calcium dependent and of low affinity.

Laminin forms an independent network in basement membranes.

Laminin self-assembles in vitro into a polymer by a reversible, entropy-driven and calcium-facilitated process dependent upon the participation of the short arm globular domains. We now find that this polymer is required for the structural integrity of the collagen-free basement membrane of cultured embryonal carcinoma cells (ECC) and for the supramolecular organization and anchorage of laminin in the collagen-rich basement membrane of the Engelbreth-Holm-Swarm tumor (EHS). First, low temperature and EDTA induced the dissolution of ECC basement membranes and released approximately 80% of total laminin from the EHS basement membrane. Second, laminin elastase fragments (E4 and E1') possessing the short arm globules of the B1, B2, and A chains selectively acted as competitive ligands that dissolved ECC basement membranes and displaced laminin from the EHS basement membrane into solution. The fraction of laminin released increased as a function of ligand concentration, approaching the level of the EDTA-reversible pool. The smaller (approximately 20%) residual pool of EHS laminin, in contrast, could only be effectively displaced by E1' and E4 if the collagenous network was first degraded with bacterial collagenase. The supramolecular architecture of freeze-etched and platinum/carbon replicated reconstituted laminin gel polymer, ECC, and collagenase-treated EHS basement membranes were compared and found to be similar, further supporting the biochemical data. We conclude that laminin forms a network independent of that of type IV collagen in basement membranes. Furthermore, in the EHS basement membrane four-fifths of laminin is anchored strictly through noncovalent bonds between laminin monomers while one-fifth is anchored through a combination of these bonds and laminin-collagen bridges.

Cell and heparin binding in the distal long arm of laminin: identification of active and cryptic sites with recombinant and hybrid glycoprotein.

The long arm of laminin, which binds heparin and cells, consists of three polypeptides (A, B1, and B2) joined in a coiled-coil rod attached to a terminal A chain globule (G). Previously, we found that recombinant globular domain (rG) supported heparin and myoblast binding (Yurchenco, P. D., U. Sung, M. D. Ward, Y. Yamada, and J. J. O'Rear. 1993. J. Biol. Chem. 268:8356-8365). To further analyze long arm functions, we expressed the distal moiety of the mouse laminin A chain extending from the middle of the rod to the carboxyl terminus (rAiG). This larger glycoprotein, secreted by Sf9 insect cells infected with recombinant baculovirus, was intercalated in vitro into the corresponding disulfide-linked B chain segments of laminin fragment E8 (distal long arm rod and proximal globule). The hybrid molecule (B-rAiG) possessed a structure similar to laminin long arm as judged by electron microscopy and limited proteolysis. By joining rAiG with E8-B chains, the affinity of G domain for heparin decreased from that observed with rAiG and rG to one similar to native protein. HT1080 cells adhered to E8, rAiG, and B-rAiG, less well to rG, and not to denatured E8/B-rAiG, the A and B chain moieties of E8, or to a mixture of rG and E8-B chains. Cell adhesion to E8 and B-rAiG, in contrast to rAiG, was inhibited with antibodies specific for alpha 6 and beta 1 integrin chains. Since intercalation (a) restored a conformationally dependent alpha 6 beta 1 integrin recognition site present in native protein, (b) inactivated a cryptic cell binding activity in the A chain, and (c) inhibited a heparin binding site present in proximal G domain, we conclude that biological activities of laminin are different from that of its isolated subunits.

The incubation of laminin, collagen IV, and heparan sulfate proteoglycan at 35 degrees C yields basement membrane-like structures.

Three basement membrane components, laminin, collagen IV, and heparan sulfate proteoglycan, were mixed and incubated at 35 degrees C for 1 h, during which a precipitate formed. Centrifugation yielded a pellet which was fixed in either potassium permanganate for ultrastructural studies, or in formaldehyde for Lowicryl embedding and immunolabeling with protein A-gold or anti-rabbit immunoglobulin-gold. Three types of structures were observed and called types A, B, and C. Type B consisted of 30-50-nm-wide strips that were dispersed or associated into a honeycomb-like pattern, but showed no similarity with basement membranes. Immunolabeling revealed that type B strips only contained heparan sulfate proteoglycan. The structure was attributed to self-assembly of this proteoglycan. Type A consisted of irregular strands of material that usually accumulated into semisolid groups. Like basement membrane, the strands contained laminin, collagen IV, and heparan sulfate proteoglycan, and, at high magnification, they appeared as a three-dimensional network of cord-like elements whose thickness averaged approximately 3 nm. But, unlike the neatly layered basement membranes, the type A strands were arranged in a random, disorderly manner. Type C structures were convoluted sheets composed of a uniform, dense, central layer which exhibited a few extensions on both surfaces and was similar in appearance and thickness to the lamina densa of basement membranes. Immunolabeling showed that laminin, collagen IV, and proteoglycan were colocalized in the type C sheets. At high magnification, the sheets appeared as a three-dimensional network of cords averaging approximately 3 nm. Hence, the organization, composition, and ultrastructure of type C sheets made them similar to the lamina densa of authentic basement membranes.

Vitamin A deficiency injures liver parenchyma and alters the expression of hepatic extracellular matrix.

Vitamin A is an essential lipid-soluble nutrient that is crucial for morphogenesis and adult tissue maintenance. The retinoid homeostasis in the liver depends on a regular supply of vitamin A from an adequate dietary intake to preserve the normal organ structure and functions. This study focuses on the effect of vitamin A deficiency on the morphology and extracellular proteins expression of the liver in adult Wistar rats. Animals were fed with a normal (control group) or deficient vitamin A diet for 3 months. At the end of the experimental period, histological examination of the livers under light and electron microscopy revealed that vitamin A deficiency produced a loss of hepatocyte cord disposition with an irregular parenchymal organization. Abundant fat droplets were present in the cytoplasm of the hepatocytes. Elongated myofibroblastic-like cells with an irregular cytoplasmic process and without lipid droplets could be seen at the perisinusoidal space, where an elevated intensity of alpha smooth muscle actin (alpha-SMA) was observed. These results suggest that an activation of hepatic stellate cells (HSCs) occurred. Moreover, immunochemical methods revealed that vitamin A deficiency led to an increased expression of hepatic fibronectin, laminin and collagen type IV. We propose that vitamin A deprivation caused liver injury and that HSCs underwent a process of activation in which they produced alpha-SMA and synthesized extracellular components. These changes may be a factor predisposing to liver fibrosis. In consequence, vitamin A deprivation could affect human and animal health.

The extracellular matrix of hydra is a porous sheet and contains type IV collagen.

Hydra, as an early diploblastic metazoan, has a well-defined extracellular matrix (ECM) called mesoglea. It is organized in a tri-laminar pattern with one centrally located interstitial matrix that contains type I collagen and two sub-epithelial zones that resemble a basal lamina containing laminin and possibly type IV collagen. This study used monoclonal antibodies to the three hydra mesoglea components (type I, type IV collagens and laminin) and immunofluorescent staining to visualize hydra mesoglea structure and the relationship between these mesoglea components. In addition, hydra mesoglea was isolated free of cells and studied with immunofluorescence and scanning electron microscopy (SEM). Our results show that type IV collagen co-localizes with laminin in the basal lamina whereas type I collagen forms a grid pattern of fibers in the interstitial matrix. The isolated mesoglea can maintain its structural stability without epithelial cell attachment. Hydra mesoglea is porous with multiple trans-mesoglea pores ranging from 0.5 to 1 microm in diameter and about six pores per 100 microm(2) in density. We think these trans-mesoglea pores provide a structural base for epithelial cells on both sides to form multiple trans-mesoglea cell-cell contacts. Based on these findings, we propose a new model of hydra mesoglea structure.

Cell adhesion and mechanical properties of a flexible scaffold for cardiac tissue engineering.

Cardiac tissue engineering is focused on obtaining functional cardiomyocyte constructs to provide an alternative to cellular cardiomyoplasty. Mechanical stimuli have been shown to stimulate protein expression and the differentiation of mammalian cells from contractile tissues. Our aim was to obtain a flexible scaffold which could be used to apply mechanical forces during tissue regeneration. Poly(1,8-octanediol-co-citric acid) (POC) is an elastomer that can be processed into scaffolds for tissue engineering. We investigated the effect of modifying the porosity on the mechanical properties of the POC scaffolds. In addition, the effects of the storage method and strain rate on material integrity were assessed. The maximum elongation of POC porous films varied from 60% to 160% of their original length. A decrease in the porosity caused a rise in this elastic modulus. The attachment of HL-1 cardiomyocytes to POC was assessed on films coated with fibronectin, collagen and laminin. These extracellular matrix proteins promoted cell adhesion in a protein-type- and concentration-dependent manner. Therefore, POC scaffolds can be optimised to meet the mechanical and biological parameters needed for cardiac culture. This porous material has the potential to be used for cardiac tissue engineering as well as for other soft tissue applications.

Characterization of three-dimensional cancer cell migration in mixed collagen-Matrigel scaffolds using microfluidics and image analysis.

Microfluidic devices are becoming mainstream tools to recapitulate in vitro the behavior of cells and tissues. In this study, we use microfluidic devices filled with hydrogels of mixed collagen-Matrigel composition to study the migration of lung cancer cells under different cancer invasion microenvironments. We present the design of the microfluidic device, characterize the hydrogels morphologically and mechanically and use quantitative image analysis to measure the migration of H1299 lung adenocarcinoma cancer cells in different experimental conditions. Our results show the plasticity of lung cancer cell migration, which turns from mesenchymal in collagen only matrices, to lobopodial in collagen-Matrigel matrices that approximate the interface between a disrupted basement membrane and the underlying connective tissue. Our quantification of migration speed confirms a biphasic role of Matrigel. At low concentration, Matrigel facilitates migration, most probably by providing a supportive and growth factor retaining environment. At high concentration, Matrigel slows down migration, possibly due excessive attachment. Finally, we show that antibody-based integrin blockade promotes a change in migration phenotype from mesenchymal or lobopodial to amoeboid and analyze the effect of this change in migration dynamics, in regards to the structure of the matrix. In summary, we describe and characterize a robust microfluidic platform and a set of software tools that can be used to study lung cancer cell migration under different microenvironments and experimental conditions. This platform could be used in future studies, thus benefitting from the advantages introduced by microfluidic devices: precise control of the environment, excellent optical properties, parallelization for high throughput studies and efficient use of therapeutic drugs.

Using three-dimensional acinar structures for molecular and cell biological assays.

Epithelial cells grown in three-dimensional matrix allows one to investigate biological processes in a setting that is closer to in vivo conditions than those obtained by growing cells on plastic culture dishes. Here we outline procedures that allow one to investigate molecular mechanisms that regulate formation and disruption of three-dimensional epithelial structures.

Tumor cell migration in three dimensions.

In almost all physiological and pathological situations, cells migrate through three-dimensional environments, yet most studies of cell motility have used two-dimensional substrates. It is clear that two-dimensional substrates do not mimic the in vivo environment accurately, and recent work using three-dimensional environments has revealed many different mechanisms of cell migration (Abbott, 2003; Sahai and Marshall, 2003; Wolf et al., 2003). This chapter will describe methods for generating three-dimensional matrices suitable for studying cell motility, methods for imaging the morphology of motile cells in situ, and methods for quantifying cell migration through three-dimensional environments.

Laminin-311 (Laminin-6) fiber assembly by type I-like alveolar cells.

Two epithelial cell types cover the alveolar surface of the lung. Type II alveolar epithelial cells produce surfactant and, during development or following wounding, give rise to type I cells that are involved in gas exchange and alveolar fluid homeostasis. In culture, freshly isolated alveolar type II cells assume a more squamous (type I-like) appearance within 4 days after plating. They assemble numerous focal adhesions that associate with the actin cytoskeleton at the cell margins. These alveolar epithelial cells lose expression of type II cell markers including SP-C and after 4 days in culture express the type I cell marker T1alpha. Those cells that express T1alpha also deposit fibers of laminin-311 in their matrix. The latter appears to be related to their development of a type I phenotype because freshly isolated, primary type I cells also assemble laminin-311-rich fibers in vitro. A beta1 integrin antibody antagonist inhibits the assembly of laminin-311 matrix fibers. Moreover, the formation of laminin fibers is dependent on the activity of the small GTPases and is perturbed by ML-7, a myosin light chain kinase inhibitor. In summary, our data indicate that assembly of laminin-311 fibers by lung epithelial cells is integrin and actin cytoskeleton dependent, and that these fibers are characteristic of type I alveolar cells.

Development of an esophagus acellular matrix tissue scaffold.

A cell-extraction protocol yielding an esophagus acellular matrix (EAM) scaffold for use in tissue engineering of an esophagus, including hypotonic lysis, multiple detergent cell extraction steps, and nucleic acid digestion, was developed in a rat model. Histological techniques, burst pressure studies, in vitro esophageal epithelial cell seeding, and in vivo implantation were used to assess cell extraction, extracellular matrix (ECM) preservation, and biocompatibility. Microscopy demonstrated that cell extraction protocols using sodium dodecyl sulfate (SDS) (0.5%, wt/vol) as a detergent resulted in cell-free EAM with retained ECM protein collagen, elastin, laminin, and fibronectin. Burst pressure studies indicated a loss of tensile strength in EAMs, but at intraluminal pressures that were unlikely to affect in vivo application. In vitro cell seeding studies exhibited epithelial cell proliferation with stratification similar to native esophagi after 11 days, and subcutaneously implanted EAMs displayed neovascularization and a minimal inflammatory response after 30 days of implantation. This study presents an esophagus acellular matrix tissue scaffold with preserved ECM proteins, biomechanical properties, and the ability to support esophageal cell proliferation to serve as the foundation for a tissue-engineered esophagus.

Engineering three-dimensional pulmonary tissue constructs.

In this paper, we report on engineering 3-D pulmonary tissue constructs in vitro. Primary isolates of murine embryonic day 18 fetal pulmonary cells (FPC) were comprised of a mixed population of epithelial, mesenchymal, and endothelial cells as assessed by immunohistochemistry and RT-PCR of 2-D cultures. The alveolar type II (AE2) cell phenotype in 2-D and 3-D cultures was confirmed by detection of SpC gene expression and presence of the gene product prosurfactant protein C. Three-dimensional constructs of FPC were generated utilizing Matrigel hydrogel and synthetic polymer scaffolds of poly-lactic-co-glycolic acid (PLGA) and poly-L-lactic-acid (PLLA) fabricated into porous foams and nanofibrous matrices, respectively. Three-dimensional Matrigel constructs contained alveolar forming units (AFU) comprised of cells displaying AE2 cellular ultrastructure while expressing the SpC gene and gene product. The addition of tissue-specific growth factors induced formation of branching, sacculated epithelial structures reminiscent of the distal lung architecture. Importantly, 3-D culture was necessary for inducing expression of the morphogenesis-associated distal epithelial gene fibroblast growth factor receptor 2 (FGFr2). PLGA foams and PLLA nanofiber scaffolds facilitated ingrowth of FPC, as evidenced by histology. However, these matrices did not support the survival of distal lung epithelial cells, despite the presence of tissue-specific growth factors. Our results may provide the first step on the long road toward engineering distal pulmonary tissue for augmenting and/or replacing dysfunctional native lung in diseases, such as neonatal pulmonary hypoplasia.

Structural and functional changes of laminin and type IV collagen after nonenzymatic glycation.

Laminin and type IV collagen are two major basement membrane glycoproteins; they are large multidomain macromolecules that are involved in two types of functions. First, they provide the structural framework of all basement membranes, and second, they interact with cell-surface molecules and are key to adhesion, spreading, and proliferation of cells. We summarize experimental evidence that nonenzymatic glucosylation of these two macromolecules in vitro alters their structure, their ability to polymerize, and their ability to promote cell adhesion. Additional studies are needed to document these changes in situ and therefore extend these conclusions to intact basement membranes.

Laminin alterations after in vitro nonenzymatic glycosylation.

Laminin, a basement membrane protein derived from the matrix of the Engelbreth-Holm-Swarm murine tumor, was nonenzymatically glycosylated in vitro in the presence of increasing glucose concentrations. The amount of glucose incorporated per laminin molecule was shown to be proportional to the molarity of glucose used. Nonenzymatic glycosylation resulted in formation of cross-links and alterations of the cruciform shape of laminin molecules; these alterations were dramatic when high concentrations of glucose were used. One of the functions of laminin, the process of self-assembly, was shown to be impaired after in vitro nonenzymatic glycosylation. Glucose incorporation resulted in a dramatic decrease of long-to-long laminin dimers, which normally form during the initial steps of assembly. Furthermore, nonenzymatic glycosylation of laminin reduced its ability to self-associate into complexes larger than dimers, as judged by turbidimetry. The observed decrease of maximal turbidity was proportional to the degree of nonenzymatic glycosylation. Aminoguanidine, which has been suggested to inhibit cross-link formation, was shown to restore to a large extent the shape of laminin, the percentage of long-to-long arm dimers, and the maximal turbidity when included in the mixtures of laminin and glucose. These data suggest that structural and functional alterations of laminin may be primarily due to formation of cross-links. Such modifications of laminin (along with our basement membrane components) may contribute to the morphological and physiological changes observed in basement membranes under diabetic conditions.

Stabilization of the alpha-helical coiled-coil domain in laminin by C-terminal disulfide bonds.

The long arm of laminin in which three polypeptide chains alpha, beta, and gamma are assembled in an alpha-helical coiled-coil structure is stabilized by non-covalent interactions and disulfide bridges. The stabilizing role of the disulfide linkage between the beta and gamma-chains at the C-terminal region of the assembly domain was investigated with about 100-residue long recombinant fragments. Circular dichroism spectra and electron micrographs were identical for linked and non-linked species and indicated two-stranded coiled-coil structures with about 100% alpha-helicity at 20 degrees C. Thermal transition profiles revealed an increase of the melting temperature from 42 degrees C to 60.4 degrees C upon disulfide formation at a chain concentration of 25 microM. The enthalpy of interaction was identical for the two species but the negative entropy involved in joining the two chains was reduced by the disulfide bonds. At chain concentrations of 10 microM the Gibbs free energy delta G was by 17.5 kJ/mol more negative for the disulfide-linked than for the unlinked chains. Because of the concentration dependence of the entropy of the non-linked chains, this difference decreased with increasing concentration and, by extrapolation at chain concentrations of 10 mM, the stability of both structures would be the same. As a competing reaction, beta-chains associated to four-stranded bundles which probably consist of pairs of two-stranded coiled-coils. After disulfide formation a biphasic transition curve was observed which indicated two different ways of connecting the chains in the bundle.

Ultrastructural localization of laminin-5 (gamma2 chain) in the rat peri-implant oral mucosa around a titanium-dental implant by immuno-electron microscopy.

Laminin-5 (Ln-5) is an important molecule associated with epithelial cell adhesion and migration. In the gingiva around the tooth, Ln-5 localizes within basement membranes between the junctional epithelium (JE) and the tooth or connective tissue. Recently, we reported that in the oral mucosa around a dental implant, Ln-5 is expressed within the basement membranes at the implant-peri-implant epithelium (PIE) interface, and at the PIE-connective tissue interface. However, the ultrastructural localization of Ln-5 within or along the PIE has not yet been reported. Therefore, peri-implant oral mucosa was treated with anti-Ln-5 (gamma2 chain) antibody and examined using immuno-electron microscopy. Ln-5 was localized in the cells of the innermost-third layer and basal layer of the PIE. A 100-nm-wide Ln-5-positive internal basal lamina (basement membrane) and hemidesmosomes as adhesion structures were formed at the apical portion of the implant-PIE interface. However, at the upper-middle portion of the interface, these adhesion structures were not observed. Furthermore, at the PIE-connective tissue interface, the Ln-5-positive external basal lamina (basement membrane) and hemidesmosomes were partially deficient. Judging from these findings, we concluded that Ln-5 contributes to the attachment of the PIE to the titanium surface, and that PIE attached to titanium at the apical portion of the dental implant-PIE interface.