Bifunctional Fluorescent Probes for the Detection of Mustard Gas and Phosgene.

Mustard gas [sulfur mustard (SM)] and phosgene are the most frequently used chemical warfare agents (CWAs), which pose a serious threat to human health and national security, and their rapid and accurate detection is essential to respond to terrorist attacks and industrial accidents. Herein, we developed a fluorescent probe with o-hydroxythioketone as two sensing sites, AQso, which can detect and distinguish mustard gas and phosgene. The dual-sensing-site probe AQso reacts with mustard gas to form a cyclic product with high sensitivity [limit of detection (LOD) = 70 nM] and is highly selective to SM over phosgene, SM analogues, active alkylhalides, acylhalides, and nerve agent mimics, in ethanol solutions. When encountering phosgene, AQso rapidly converts to cyclic carbonate, which is sensitive (LOD = 14 nM) and highly selective. Their sensing mechanisms of AQso to mustard gas and phosgene were well demonstrated by separation and characterization of the sensing products. Furthermore, a facile test strip with the probe was prepared to distinguish 2-chloroethyl ethyl sulfide (CEES) and phosgene in the gas phase by different fluorescence colors and response rates. Not using the complicated instrument, the qualitative and quantitative detection of CEES or phosgene can be achieved only by measuring the red-green-blue (RGB) channel intensity of the test strip after being exposed to CEES or phosgene gas by the smartphone with an RGB color application.

Ratiometric Fluorescent Probe for the Detection of Nanomolar Phosgene in Solution and Gaseous Phase: Advancing Crime Detection Applications.

Phosgene, an exceptionally hazardous gas, poses a grave concern for the health and safety of the general public. The present study describes a fluorescent ratiometric probe for phosgene employing 2-(naphthalen-2-yl) benzo[d]oxazol-5-amine (NOA) with an amino group as the recognition site. NOA detects phosgene through the intramolecular charge transfer mechanism. The electron-rich amine group of NOA attacks the electrophilic carbonyl group of phosgene, resulting in a quick response within 20 s. NOA demonstrates a low detection limit of 60 nM while maintaining high selectivity and sensitivity toward phosgene. The final product was isolated and verified by nuclear magnetic resonance spectroscopy. The probe can detect phosgene not just quickly in a solution environment but also in its solid state. The probe's applications in fingerprint imaging and bioimaging are also demonstrated.

BODIPY-based fluorescent chemosensor for phosgene detection: confocal imaging of nasal mucosa and lung samples from mouse exposed to phosgene.

The improper use of phosgene, either as a chemical warfare agent or a leak during chemical production, causes significant risks to human life and property. Therefore, it is particularly important to develop a rapid and highly selective method for the detection of phosgene. In this article, a highly selective fluorescent sensor ONB with a BODIPY unit as a fluorophore and o-aminophenol as a reactive site was constructed for the selective and rapid detection of phosgene in solution. The ONB-containing nanofibers were sprayed onto a non-woven fabric by electrostatic spinning and cut into test films, which can be used well for the detection of gaseous phosgene. While, there were no reported bio-imaging applications for phosgene detection. In this work, nasal mucosa and lung samples from the mice exposed to gaseous phosgene after dropping the ONB solution through the nasal cavity achieved bio-imaging applications successfully.

Visible-Light-Mediated Liberation and In Situ Conversion of Fluorophosgene.

The first example for the photocatalytic generation of a highly electrophilic intermediate that is not based on radical reactivity is reported. The single-electron reduction of bench-stable and commercially available 4-(trifluoromethoxy)benzonitrile by an organic photosensitizer leads to its fragmentation into fluorophosgene and benzonitrile. The in situ generated fluorophosgene was used for the preparation of carbonates, carbamates, and urea derivatives in moderate to excellent yields via an intramolecular cyclization reaction. Transient spectroscopic investigations suggest the formation of a catalyst charge-transfer complex-dimer as the catalytic active species. Fluorophosgene as a highly reactive intermediate, was indirectly detected via its next downstream carbonyl fluoride intermediate by NMR. Furthermore, detailed NMR analyses provided a comprehensive reaction mechanism including a water dependent off-cycle equilibrium.

BODIPY-Based Fluorescent Sensor for the Recognization of Phosgene in Solutions and in Gas Phase.

As a highly toxic and widely used chemical, phosgene has become a serious threat to humankind and public security because of its potential use by terrorists and unexpected release during industrial accidents. For this reason, it is an urgent need to develop facile, fast, and selective detection methods of phosgene. In this Article, we have constructed a highly selective fluorescent sensor o-Pab for phosgene with a BODIPY unit as a fluorophore and o-phenylenediamine as a reactive site. The sensor o-Pab exhibits rapid response (∼15 s) in both colorimetric and turn-on fluorescence modes, high selectivity for phosgene over nerve agent mimics and various acyl chlorides and a low detection limit (2.7 nM) in solutions. In contrast to most undistinguishable sensors reported, o-Pab can react with phosgene but not with its substitutes, triphosgene and biphosgene. The excellent discrimination of o-Pab has been demonstrated to be due to the difference in highly reactive and bifunctional phosgene relative to its substitutes. Furthermore, a facile testing paper has been fabricated with poly(ethylene oxide) immobilizing o-Pab on a filter paper for real-time selective monitoring of phosgene in gaseous phase.

A Fluorescent Sensor for Dual-Channel Discrimination between Phosgene and a Nerve-Gas Mimic.

The ability to analyze highly toxic chemical warfare agents (CWAs) and related chemicals in a rapid and precise manner is essential in order to alleviate serious threats to humankind and public security caused by unexpected terrorist attacks and industrial accidents. In this investigation, we designed a o-phenylenediamine-pyronin linked dye that is capable of both fluorogenic and colorimetric discrimination between phosgene and the prototypical nerve-agent mimic, diethyl chlorophosphate (DCP) in the solution or gas phase. Moreover, this dye has been used to construct a portable kit that can be employed for real-time monitoring of DCP and phosgene in the field, both in a discriminatory manner, and in a simple and safe way.

Characterization of the designer drug bk-2C-B (2-amino-1-(bromo-dimethoxyphenyl)ethan-1-one) by gas chromatography/mass spectrometry without and with derivatization with 2,2,2-trichloroethyl chloroformate, liquid chromatography/high-resolution mass spectrometry, and nuclear magnetic resonance.

RATIONALE: We describe the analytical characterization of the designer drug bk-2C-B, a cathinone derivative, contained in a seized tablet, in the absence of an analytical standard. METHODS: The analytical techniques employed include gas chromatography/mass spectrometry (GC/MS), without and with derivatization with 2,2,2-trichloroethyl chloroformate, liquid chromatography/high-resolution-MS (LC/HRMS) with an Orbitrap® analyzer, and nuclear magnetic resonance (NMR). LC/HRMS measurements consisted of accurate mass measurements of MH(+) ionic species under full scan conditions; comparison of experimental and calculated MH(+) isotopic patterns; examination of the isotopic fine structure (IFS) of the M+1, M+2, M+3 isotopic peaks relative to the monoisotopic M+0 peak; study of MH(+) collision-induced dissociation (CID) product ions obtained in fragmentation experiments. RESULTS: GC/MS analysis gave highly informative EI mass spectra, particularly after the derivatization of bk-2C-B with 2,2,2-trichloroethyl chloroformate. The application of LC/HRMS, allowing for accurate mass measurements at 100,000 resolving power, greatly enhanced analytical capabilities in structural characterization of this new designer drug. HRMS allowed us to obtain the accurate mass measurements of bk-2C-B MH(+) ionic species, with a mass accuracy of 2.19 ppm; fully superimposable experimental and calculated MH(+) isotopic patterns, with RIA1 and RIA2 values <4%; the IFS of the M+1, M+2, M+3 isotopic peaks relative to the monoisotopic M+0 peak completely in accordance with theoretical values. These findings enabled us to obtain the elemental composition formula of the seized drug. Furthermore, characteristic MH(+) CID product ions enabled the characterization of the bk-2C-B molecular structure. The presence of (79)Br and (81)Br isotopes in the substance molecule produced a characteristic isotopic pattern in most MS spectra. Lastly, NMR spectra allowed us to obtain useful information about the position of substituents in the designer drug. CONCLUSIONS: The combination of all the analytical techniques employed allowed the characterization of the seized psychoactive substance, in spite of the lack of a reference standard.

Flow synthesis of ethyl isocyanoacetate enabling the telescoped synthesis of 1,2,4-triazoles and pyrrolo-[1,2-c]pyrimidines.

The efficient flow synthesis of important heterocyclic building blocks based on the 1,2,4-triazole and pyrrolo[1,2-c]pyrimidine scaffold has been achieved. Crucially, a telescoped continuous flow process was developed based on the reaction of N-formylglycine with triphosgene to deliver a stream of ethyl isocyanoacetate in situ, which subsequently yielded the desired heterocyclic entities in a telescoped reaction. Additionally, the functionalisation of the pyrrolo[1,2-c]pyrimidine core via subsequent SEAr reactions was studied revealing insight into a 'halogen dance' phenomenon associated with these medicinally relevant architectures.

Isocyanate- and phosgene-free routes to polyfunctional cyclic carbonates and green polyurethanes by fixation of carbon dioxide.

The catalytic chemical fixation of carbon dioxide by carbonation of oxiranes, oxetanes, and polyols represents a very versatile green chemistry route to environmentally benign di- and polyfunctional cyclic carbonates as intermediates for the formation of non-isocyanate poly-urethane (NIPU). Two synthetic pathways lead to NIPU thermoplastics and thermosets: i) polycondensation of diacarbamates or acyclic dicarbonates with diols or diamines, respectively, and ii) polyaddition by ring-opening polymerization of di- and polyfunctional cyclic carbonates with di- and polyamines. The absence of hazardous and highly moisture-sensitive isocyanates as intermediates eliminates the need for special safety precautions, drying and handling procedures. Incorporated into polymer backbones and side chains, carbonate groups enable facile tailoring of a great variety of urethane-functional polymers. As compared with conventional polyurethanes, ring-opening polymerization of polyfunctional cyclic carbonates affords polyhydroxyurethanes with unconventional architectures including NIPUs containing carbohydrate segments. NIPU/epoxy hybrid coatings can be applied on wet surfaces and exhibit improved adhesion, thermal stability and wear resistance. Combining chemical with biological carbon dioxide fixation affords 100% bio-based NIPUs derived from plant oils, terpenes, carbohydrates, and bio polyols. Biocompatible and biodegradable NIPU as well as NIPU biocomposites hold great promise for biomedical applications.

On readout of vibrational qubits using quantum beats.

Readout of the final states of qubits is a crucial step towards implementing quantum computation in experiment. Although not scalable to large numbers of qubits per molecule, computational studies show that molecular vibrations could provide a significant (factor 2-5 in the literature) increase in the number of qubits compared to two-level systems. In this theoretical work, we explore the process of readout from vibrational qubits in thiophosgene molecule, SCCl2, using quantum beat oscillations. The quantum beats are measured by first exciting the superposition of the qubit-encoding vibrational states to the electronically excited readout state with variable time-delay pulses. The resulting oscillation of population of the readout state is then detected as a function of time delay. In principle, fitting the quantum beat signal by an analytical expression should allow extracting the values of probability amplitudes and the relative phases of the vibrational qubit states. However, we found that if this procedure is implemented using the standard analytic expression for quantum beats, a non-negligible phase error is obtained. We discuss the origin and properties of this phase error, and propose a new analytical expression to correct the phase error. The corrected expression fits the quantum beat signal very accurately, which may permit reading out the final state of vibrational qubits in experiments by combining the analytic fitting expression with numerical modelling of the readout process. The new expression is also useful as a simple model for fitting any quantum beat experiments where more accurate phase information is desired.

Efficient amide bond formation through a rapid and strong activation of carboxylic acids in a microflow reactor.

The development of highly efficient amide bond forming methods which are devoid of side reactions, including epimerization, is important, and such a method is described herein and is based on the concept of rapid and strong activation of carboxylic acids. Various carboxylic acids are rapidly (0.5 s) converted into highly active species, derived from the inexpensive and less-toxic solid triphosgene, and then rapidly (4.3 s) reacted with various amines to afford the desired peptides in high yields (74%-quant.) without significant epimerization (≤3%). Our process can be carried out at ambient temperature, and only CO2 and HCl salts of diisopropylethyl amine are generated. In the long history of peptide synthesis, a significant number of active coupling reagents have been abandoned because the highly active electrophilic species generated are usually susceptible to side reactions such as epimerization. The concept presented herein should renew interest in the use of these reagents.

More protected vibrational states at the dissociation limit of SCCl2.

Local vibrational coupling models predict that intramolecular vibrational energy redistribution (IVR) is not completely statistical even at the dissociation limit of polyatomic molecules. Thus states protected from IVR and from rapid dissociation form regular progressions and can be assigned vibrational quantum numbers. We previously observed such regular progressions of states in vibrational spectra of the molecule SCCl2, but a discrepancy in the density of such states remained between theory and experiment. Here we show that the gap can be closed by observing and assigning additional vibrational transitions above the dissociation limit of SCCl2, and by carefully analyzing the theoretically expected density of protected states. The newly observed transitions originate from recently assigned and more highly excited vibrational levels in the B̃ electronic state, connecting to the X̃ ground state by different Franck-Condon factors. Based on our analysis of Franck-Condon activity, we conclude that theory and experiment agree within measurement uncertainty. Consistency between theory and experiment implies that even more protected states should be observed for larger molecules, leading to nonstatistical dissociation reactions.

Franck-Condon fingerprinting of vibration-tunneling spectra.

We introduce Franck-Condon fingerprinting as a method for assigning complex vibration-tunneling spectra. The B̃ state of thiophosgene (SCCl2) serves as our prototype. Despite several attempts, assignment of its excitation spectrum has proved difficult because of near-degenerate vibrational frequencies, Fermi resonance between the C-Cl stretching mode and the Cl-C-Cl bending mode, and large tunneling splittings due to the out-of-plane umbrella mode. Hence, the spectrum has never been fitted to an effective Hamiltonian. Our assignment approach replaces precise frequency information with intensity information, eliminating the need for double resonance spectroscopy or combination differences, neither of which have yielded a full assignment thus far. The dispersed fluorescence spectrum of each unknown vibration-tunneling state images its character onto known vibrational progressions in the ground state. By using this Franck-Condon fingerprint, we were able to determine the predominant character of several vibration-tunneling states and assign them; in other cases, the fingerprinting revealed that the states are strongly mixed and cannot be characterized with a simple normal mode assignment. The assigned transitions from vibration-tunneling wave functions that were not too strongly mixed could be fitted within measurement uncertainty by an effective vibration-tunneling Hamiltonian. A fit of all observed vibration-tunneling states will require a full resonance-tunneling Hamiltonian.

Detection of exposed phosgene in household bleach: development of a selective and cost-effective sensing tool.

Sensing of gaseous environment pollutants and health hazards is in demand these days and in this regard, lethal phosgene has emerged as a leading entrant. In this contribution, we have successfully developed a facile chemodosimeter (ANO) based on an anthracene fluorophore and oxime recognition site with an interesting mechanism to sense lethal phosgene evolved from bleaching powder, a very popular disinfectant and sanitizer. The ANO probe is highly competent in recognizing deadly phosgene in solution and in the gaseous phase with a detection limit in the nanomolar range (1.52 nM). The sensing mechanism is confirmed by UV-vis, emission spectroscopy, mass spectrometry, and computational studies.

Non-enzymatically derived minor lipids found in Escherichia coli lipid extracts.

Electrospray ionization mass spectrometry is a powerful technique to analyze lipid extracts especially for the identification of new lipid metabolites. A hurdle to lipid identification is the presence of solvent contaminants that hinder the identification of low abundance species or covalently modify abundant lipid species. We have identified several non-enzymatically derived minor lipid species in lipid extracts of Escherichia coli; phosphatidylmethanol, ethyl and methyl carbamates of PE and N-succinyl PE were identified in lipid extracts of E. coli. Phosphatidylmethanol (PM) was identified by exact mass measurement and collision induced dissociation tandem mass spectrometry (MS/MS). Extraction in the presence of deuterated methanol leads to a 3 atomic mass unit shift in the [M-H](-) ions of PM indicating its formation during extraction. Ethyl and methyl carbamates of PE, also identified by exact mass measurement and MS/MS, are likely to be formed by phosgene, a breakdown product of chloroform. Addition of phosgene to extractions containing synthetic PE significantly increases the levels of PE-MC detected in the lipid extracts by ESI-MS. Extraction in the presence of methylene chloride significantly reduced the levels of these lipid species. N-succinyl PE is formed from reaction of succinyl-CoA with PE during extraction. Interestingly N-succinyl PE can be formed in an aqueous reaction mixture in the absence of added E. coli proteins. This work highlights the reactivity of the amine of PE and emphasizes that careful extraction controls are required to ensure that new minor lipid species identified using mass spectrometry are indeed endogenous lipid metabolites.

One-step synthesis of biodegradable curcumin-derived hydrogels as potential soft tissue fillers after breast cancer surgery.

A one-step synthesis of a curcumin-derived hydrogel (curcumin content of 25-75 mol %) is reported. Curcumin is incorporated into the hydrogel backbone and cross-linked through biodegradable carbonate linkages. Curcumin as a part of the polymer backbone is protected from oxidation and degradation, while hydrogel hydrolysis results in the release of active curcumin. Nontoxic poly(ethylene glycol) and desaminotyrosyl-tyrosine ethyl ester are used to tune the hydrophilic/hydrophobic hydrogel properties. In this way, hydrogels with a wide range of physical properties including water-uptake (100-550%) and compression moduli (7-100 kPa) were obtained. Curcumin release is swelling-controlled and could be extended to 80 days. In vitro, curcumin-derived hydrogels showed selective cytotoxicity against MDA-MB-231 (IC(50) 9 µM) breast cancer cells but no cytotoxicity to noncancerous quiescent human dermal fibroblasts even at high curcumin concentrations (160 µM). One possible application of these curcumin-derived hydrogels is as soft tissue filler after surgical removal of cancerous tissue.

A hydrazine- and phosgene-free synthesis of tetrazinanones, precursors to 1,5-dialkyl-6-oxoverdazyl radicals.

A complementary approach to published synthetic methods for tetrazinanones, precursors to verdazyl radicals, is described herein. This approach uses carbohydrazide, a commercially available reagent, as a common starting material. Unlike previous methods described in the literature, this synthetic scheme does not rely on phosgene, phosgene substitutes, or the limited pool of commercially available monosubstituted hydrazines for its execution. A large variety of alkyl substitution patterns at the N-1 and N-5 positions of verdazyl radicals are possible, including both symmetrically and unsymmetrically substituted products. An initial condensation reaction of carbohydrazide with a specific aldehyde introduces the desired C-3 substituent in the final verdazyl radical product and protects the NH(2) groups during the subsequent N-1 and N-5 alkylation reactions. A succeeding methanolysis and concomitant ring-closing reaction gives the tetrazinanone. A number of known oxidation methods can then be employed to form the final verdazyl radical product.

Utilization of [11C]phosgene for radiosynthesis of N-(2-{3-[3,5-bis(trifluoromethyl)]phenyl[11C]ureido}ethyl)glycyrrhetinamide, an inhibitory agent for proteasome and kinase in tumors.

N-(2-{3-[3,5-Bis(trifluoromethyl)]phenylureido}ethyl)glycyrrhetinamide (2), an ureido-substituted derivative of glycyrrhetinic acid (1), has been reported to display potent inhibitory activity for proteasome and kinase, which are overexpressed in tumors. In this study, we labeled this unsymmetrical urea 2 using [(11)C]phosgene ([(11)C]COCl(2)) as a labeling agent with the expectation that [(11)C]2 could become a positron emission tomography ligand for the imaging of proteasome and kinase in tumors. The strategy for the radiosynthesis of [(11)C]2 was to react hydrochloride of 3,5-bis(trifluoromethyl)aniline (4·HCl) with [(11)C]COCl(2) to possibly give isocyanate [(11)C]6, followed by the reaction of [(11)C]6 with N-(2-aminoethyl)glycyrrhetinamide (3).

Radiosynthesis of [13N]dantrolene, a positron emission tomography probe for breast cancer resistant protein, using no-carrier-added [13N]ammonia.

Dantrolene (1) is a substrate for breast cancer resistant protein, which is widely distributed in the blood-brain-barrier, intestine, gall bladder, and liver. PET study with 1 labeled with a positron emitter can be used to visualize BCRP and to elucidate the effect of BCRP on the pharmacokinetics of drugs. The objective of this study was to label 1 using nitrogen-13 ((13)N, a positron emitter; half-life: 9.9min). Using no-carrier-added [(13)N]NH(3) as the labeling agent, we synthesized [(13)N]dantrolene ([(13)N]1) for the first time. The reaction of carbomyl chloride 2b with [(13)N]NH(3) gave an unsymmetrical urea [(13)N]3, followed by cyclization of [(13)N]3 to afford [(13)N]1. Due to its instability, 2b was prepared in situ by treating amine 5 with triphosgene in a ratio of 4 to 1 and used for subsequent [(13)N]ammonolysis without purification.

Diversity-oriented, one-pot, multi-component synthesis of substituted uracil derivatives.

With the emergence of high throughput screening of bioactive molecules, there is constant need for the development of new strategies for diversity-oriented synthesis. We describe here a novel one-pot multicomponent reaction for the synthesis of uracil derivatives using easily available starting materials. This new synthetic strategy provides easy access to diverse uracil derivatives in moderate to good yields.