Immunotoxicity of stainless-steel nanoparticles obtained after 3D printing.

This study aims to investigate the in vitro effects of nanoparticles (NPs) produced during the selective laser melting (SLM) of 316 L stainless steel metal powder on the immune response in a human blood model. Experimental data did not reveal effect on viability of 316 L NPs for the tested doses. Functional immune assays showed a significant immunosuppressive effect of NPs. There was moderate stimulation (117%) of monocyte phagocytic activity without significant changes in phagocytic activity and respiratory burst of granulocytes. A significant dose-dependent increase in the levels of the pro-inflammatory cytokine TNF-a was found in blood cultures treated with NPs. On the contrary, IL-8 chemokine levels were significantly suppressed. The levels of the pro-inflammatory cytokine IL-6 were reduced by only a single concentration of NPs. These new findings can minimise potential health risks and indicate the need for more research in this area.

Using engineered water nanostructures (EWNS) for wound disinfection: Case study of Acinetobacter baumannii inactivation on skin and the inhibition of biofilm formation.

Engineered water nanostructures (EWNS) were utilized to deliver a cocktail of nature derived antimicrobials, to assess their efficacy as a solution to the problem of wound infections. The wound related microorganism Acinetobacter baumannii was inoculated on stainless steel and porcine skin and treated with EWNS. EWNS were able to reduce A. baumannii on stainless steel by 4.79 logs in 15 min, and 2 logs in 30 min on porcine skin. The EWNS were able to reduce the strength of A. baumannii biofilm on stainless steel by 87.31% as measured with the XTT assay (P < .001) and 86.27% in cellular counts (P < .001), after two EWNS interventions of 30 min each. Total antimicrobial dose delivered to the surface was 1.42 ng. SEM of biofilms after EWNS treatment showed reduced biomass. These results indicate that the EWNS technology has potential for application in field of wound disinfection and healing.

Brain-Derived Neurotrophic Factor Potentiates Entorhinal-Dentate but not Hippocampus CA1 Pathway in Adult Male Rats: A Mechanism of Taurine-Modulated BDNF on Learning and Memory.

Taurine plays an important role in neural growth and function from early to adult life, particularly in learning and memory via BDNF action. This study tested the hypothesis that BDNF differentially potentiates entorhinal-hippocampal synaptic transmission in vivo in adult rats. In anesthetized male Sprague-Dawley rats, a stainless steel recording electrode with an attached microinjector was placed into CA1 and the dentate gyrus to record fEPSP, and a paired stainless steel electrode was inserted into entorhinal cortex for continuous paired-pulse stimulation of that brain region. In the dentate gyrus, microinjection of BDNF resulted in a gradual increase in the peak slope of the fEPSP. Following the infusion, the peak fEPSP began to rise in about 8 min, reached a maximum of 120 ± 2% (from baseline) by about 20 min, and remained near peak elevation (~115%) for more than 30 min. In contrast, the same dose of BDNF when injected into CA1 had no consistent effect on fEPSP slopes in the CA1. Further, an equimolar cytochrome C (horse heart) infusion had no significant effect on fEPSP slopes in either the dentate gyrus or CA1. The potentiation effect of BDNF in the dentate gyrus is consistent with a significant increase in power spectral density of dentate gyrus field potentials at 70-200 Hz, but not at frequencies below 70 Hz. In addition, the CA1 power spectral density was not affected by BDNF (compared to cytochrome C). These data indicate that in vivo BDNF potentiates entorhinal-hippocampal synaptic transmission in dentate gyrus, but not in CA1.

Evaluation of surface disinfection methods to inactivate the beta coronavirus Murine Hepatitis Virus.

The list of EPA-approved disinfectants for coronavirus features many products for use on hard, non-porous materials. There are significantly fewer products registered for use on porous materials. Further, many common, high-touch surfaces fall in between non-porous materials such as glass and porous materials such as soft fabrics. The objective of this study was to assess the efficacy of selected commercially available disinfectant products against coronaviruses on common, high-touch surfaces. Four disinfectants (Clorox Total 360, Bleach solution, Vital Oxide, and Peroxide Multi-Surface Cleaner) were evaluated against Murine Hepatitis Virus A59 (MHV) as a surrogate coronavirus for SARS-CoV-2. MHV in cell culture medium was inoculated onto four materials: stainless steel, latex-painted drywall tape, Styrene Butadiene rubber (rubber), and bus seat fabric. Immediately (T0) or 2-hr (T2) post-inoculation, disinfectants were applied by trigger-pull or electrostatic sprayer and either held for recommended contact times (Spray only) or immediately wiped (Spray and Wipe). Recovered infectious MHV was quantified by median tissue culture infectious dose assay. Bleach solution, Clorox Total 360, and Vital Oxide were all effective (>3-log10 reduction or complete kill of infectious virus) with both the Spray Only and Spray and Wipe methods on stainless steel, rubber, and painted drywall tape when used at recommended contact times at both T0 and T2 hr. Multi-Surface Cleaner unexpectedly showed limited efficacy against MHV on stainless steel within the recommended contact time; however, it showed increased (2.3 times greater efficacy) when used in the Spray and Wipe method compared to Spray Only. The only products to achieve a 3-log10 reduction on fabric were Vital Oxide and Clorox Total 360; however, the efficacy of Vital Oxide against MHV on fabric was reduced to below 3-log10 when applied by an electrostatic sprayer compared to a trigger-pull sprayer. This study highlights the importance of considering the material, product, and application method when developing a disinfection strategy for coronaviruses on high-touch surfaces.

In vivo biocompatibility of diamond-like carbon films containing TiO2 nanoparticles for biomedical applications.

Hybrid diamond-like carbon (DLC) with incorporated titanium dioxide (TiO2) nanoparticle coatings have low friction coefficient, high wear resistance, high hardness, biocompatibility, and high chemical stability. They could be employed to modify biomedical alloys surfaces for numerous applications in biomedical engineering. Here we investigate for the first time the in vivo inflammatory process of DLC coatings with incorporated TiO2 nanoparticles. TiO2-DLC films were grown on AISI 316 stainless-steel substrates using plasma-enhanced chemical vapor deposition. The coated substrates were implanted in CF1 mice peritoneum. The in vivo cytotoxicity and biocompatibility of the samples were analyzed from macrophage lavage. Analysis in the first weeks after implantation could be helpful to evaluate the acute cytotoxicity generated after a possible inflammatory process. The in vivo results showed no inflammatory process. A significant increase in nitric oxide production on the uncoated substrates was confirmed through cytometry, and the coated substrates demonstrated biocompatibility. The presence of TiO2 nanoparticles enhanced the wound healing activity, due to their astringent and antimicrobial properties. DLC and TiO2-DLC coatings were considered biocompatible, and the presence of TiO2 nanoparticles reduced the inflammatory reactions, increasing DLC biocompatibility.

Anticorrosive and Microbial Inhibition Performance of a Coating Loaded with Andrographis paniculata on Stainless Steel in Seawater.

With the trend for green technology, the study focused on utilizing a forgotten herb to produce an eco-friendly coating. Andrographis paniculata or the kalmegh leaves extract (KLE) has been investigated for its abilities in retarding the corrosion process due to its excellent anti-oxidative and antimicrobial properties. Here, KLE was employed as a novel additive in coatings and formulations were made by varying its wt%: 0, 3, 6, 9, and 12. These were applied to stainless steel 316L immersed in seawater for up to 50 days. The samples were characterized and analyzed to measure effectiveness of inhibition of corrosion and microbial growth. The best concentration was revealed to be 6 wt% KLE; it exhibited the highest performance in improving the ionic resistance of the coating and reducing the growth of bacteria.

LOC103691336/miR-138-5p/BMPR2 axis modulates Mg-mediated osteogenic differentiation in rat femoral fracture model and rat primary bone marrow stromal cells.

Intramedullary stabilization is frequently used to treat long bone fractures. Since implant removal can become technically very challenging with the potential to cause further tissue damage, biodegradable materials are emerging as alternative options. Magnesium (Mg)-based biodegradable implants have a controllable degradation rate and good tissue compatibility, which makes them attractive for musculoskeletal research. Herein, the degradation of Mg and steel implants, the pathological characteristics and osteoblast differentiation in mice femora were examined. To investigate the molecular mechanism, we analyzed the differentially expressed long noncoding RNAs (lncRNAs) and messenger RNAs (mRNAs) in Mg-implanted or stain-steel-implanted callus tissues. lncRNA LOC103691336 was upregulated in Mg-implanted tissues and most relevant to BMPR2, a kinase receptor of BMPs with an established role in osteogenesis. The knockdown of LOC103691336 attenuated Mg-mediated osteogenic differentiation. Furthermore, miR-138-5p, previously reported to inhibit osteogenic differentiation, could bind to LOC103691336 and BMPR2 in bone marrow stromal cells (BMSCs). LOC103691336 competed with BMPR2 for miR-138-5p binding in BMSCs to attenuate the inhibitory effect of miR-138-5p on BMPR2 expression. Finally, the effect of LOC103691336 knockdown on Mg-mediated osteogenic differentiation could be attenuated by miR-138-5p inhibition. In conclusion, we provided a novel mechanism of Mg implants mediating the osteogenesis differentiation and demonstrated that Mg implants may be promising for improving fracture healing.

Use of a stainless steel locking calcaneal plate for quadrilateral plate buttress in the treatment of acetabular fractures.

Operative fixation of acetabular fractures involving the quadrilateral surface presents a challenging clinical scenario. Classically, quadrilateral plate buttress was achieved via the use of a "seven" plate. More recently, the use of an anatomic, pre-contoured design has been gaining popularity due to its pre-contoured shape and larger footprint, allowing for a wider quadrilateral plate buttress. The current study presents using a stainless steel locking calcaneal plate to obtain similar surface area coverage as the modern pre-contoured quadrilateral plate, but at a lower cost.Level of evidence IV.

Clinical and laboratory evaluation of the effects of different treatment modalities on titanium healing caps: a randomized, controlled clinical trial.

OBJECTIVES: The objective of this study is to evaluate the effects of treatment modalities on titanium surface characteristics and surrounding tissues. MATERIALS AND METHODS: Eighteen participants each had four titanium healing caps (HC) attached to four newly inserted implants. After healing, each HC was randomly assigned to either (1) titanium curettes (TC), (2) stainless steel ultrasonic tip (PS), (3) erythritol air-polishing powder (EP), or (4) only rubber cup polishing (CON). Probing depths (PD), bleeding on probing (BOP), matrix metalloproteinase 8 (MMP-8), and periopathogens were recorded before and 3 months following instrumentation. After final assessments, HCs were removed, cleaned, and subjected to (a) bacterial colonization (Streptococcus gordonii, 24 h; mixed culture, 24 h) and (b) gingival fibroblasts (5 days). HC surfaces were analyzed with a scanning electron microscope (SEM). RESULTS: No significant differences between the groups were evident before or after instrumentation for PD and BOP (except TC showed a significant decrease in PD; p = 0.049). MMP-8 levels and bacterial loads were always very low. MMP-8 decreased further after instrumentation, while bacteria levels showed no change. No significant differences (p > 0.05) were evident in bacterial colonization or fibroblast attachment. A comparison of the overall mean SEM surface roughness scores showed a significant difference between all groups (p < 0.0001) with the lowest roughness after EP. CONCLUSIONS: All treatments performed yielded comparable outcomes and may be implemented safely. CLINICAL RELEVANCE: Clinicians may fear implant surface damage, but all instrumentation types are safe and non-damaging. They can be implemented as needed upon considering the presence of staining and soft and hard deposits.

Surface modification of esophageal stent materials by a polyethylenimine layer aiming at anti-cancer function.

Esophageal cancer is difficult to cure globally and possesses high mortality rate, and it is generally accepted that palliative care such as stent implantation is the main therapy method for esophageal cancer in later period. However, the restenosis caused by tumor cells and inflammatory cells seriously interferes the stent clinical application and limits its long-term services. To solve this problem, series of drug delivery stents were developed and proven rather effective in the early stage of implantation, but more serious restenosis occurred after the drug delivery was over, which endangered the patients' life. Therefore, endowing the esophageal stent continuous anti-cancer function become an ideal strategy for inhibiting the restenosis. In this contribution, the functional layer composed of polydopamine (PDA) and Poly-ethylenimine (PEI) with series of molecular weights (MW, 1.8 × 103, 1 × 104, 2.5 × 104 and 7 × 104 Da) were fabricated onto the esophageal stent material 317L stainless steel (317L SS) surface. The surface characterization including amine quantitative, atomic force microscopy (AFM) and water contact angle measurement indicated successful preparation of the PDA/PEI layer. The Eca109 cells culture results proved that the PDA/PEI layers significantly improve Eca109 cells apoptosis and necrosis, suggesting excellent anti-cancer function. In addition, we also found that the anti-cancer function of the PDA/PEI layers was positively correlated to the immobilized PEIs' MW. All the results demonstrated the potential application of the PDA/PEI layers on the surface modification of esophageal stent for continuous anti-cancer function. It is generally accepted that the restenosis caused by tumor cells seriously interferes the esophageal stent clinical application. Thus, endowing the esophageal stent continuous anti-cancer function is the ideal strategy for inhibiting the restenosis. In this work, we fabricated functional layers composed of polydopamine (PDA) and Poly-ethylenimine (PEI) with series of molecular weights (MW, 1.8 × 103, 1 × 104, 2.5 × 104 and 7 × 104 Da) onto the esophageal stent material 317L stainless steel (317L SS) surface to inhibit the tumor cells growth, and this function was related to the PEIs' molecular weights. The functional PDA/PEI layers were expected potentially applied for surface modification of esophageal stent materials.

Inactivation of foodborne microorganisms using engineered water nanostructures (EWNS).

Foodborne diseases caused by the consumption of food contaminated with pathogenic microorganisms or their toxins have very serious economic and public health consequences. Here, we explored the effectiveness of a recently developed intervention method for inactivation of microorganisms on fresh produce, and food production surfaces. This method utilizes Engineered Water Nanostructures (EWNS) produced by electrospraying of water vapor. EWNS possess unique properties; they are 25 nm in diameter, remain airborne in indoor conditions for hours, contain Reactive Oxygen Species (ROS) and have very strong surface charge (on average 10 e/structure). Here, their efficacy in inactivating representative foodborne bacteria such as Escherichia coli, Salmonella enterica, and Listeria innocua, on stainless steel surfaces and on organic tomatoes, was assessed. The inactivation was facilitated using two different exposure approaches in order to optimize the delivery of EWNS to bacteria: (1) EWNS were delivered on the surfaces by diffusion and (2) a "draw through" Electrostatic Precipitator Exposure System (EPES) was developed and characterized for EWNS delivery to surfaces. Using the diffusion approach and an EWNS concentration of 24,000 #/cm3, the bacterial concentrations on the surfaces were reduced, depending on the bacterium and the surface type, by values ranging between 0.7 to 1.8 logs. Using the EPES approach and for an aerosol concentration of 50,000 #/cm3 at 90 min of exposure, results show a 1.4 log reduction for E. coli on organic tomato surfaces, as compared to the control (same conditions in regards to temperature and Relative Humidity). Furthermore, for L. innocua, the dose-response relationship was demonstrated and found to be a 0.7 and 1.2 logs removal at 12,000 and 23,000 #/cm3, respectively. The results presented here indicate that this novel, chemical-free, and environmentally friendly intervention method holds potential for development and application in the food industry, as a "green" alternative to existing disinfection methods.

Mg-Doped Hydroxyapatite/Chitosan Composite Coated 316L Stainless Steel Implants for Biomedical Applications.

In this investigation, ultrasonication process was used for the synthesis of magnesium doped nano-hydroxyapatite (MH) (0, 1, 2, and 3 mol% of Mg concentration) particles with controlled size and surface morphology. The size of the prepared MH particles was in the range of 20-100 nm with narrow distribution. Increase in the concentration of Mg reduced the particle size distribution from 60 to 40 nm. On incorporation of Mg in HAp lattice, an increase of 20-66 nm in specific surface area was observed in microporous HAp particles. XRF and XRD patterns reveal that the particles possess stoichiometric composition with reduced crystallinity with respect to the Mg concentration. Surface morphology of MH/chitosan (CTS) coated implant was found to be uniform without any defects. The corrosion rate of the implant decreased with increase in Mg concentration. The in vitro formation of bonelike apatite layer on the surface of the MH/CTS coated implant was observed from simulated body fluid studies. The antimicrobial activity of the MH/CTS composites against gram-positive and gram-negative bacterial strains indicated that increasing Mg concentration enhanced antimicrobial properties. Nanoindentation analysis of apatite coated implant surface reveals that the mechanical property depends on the concentration of magnesium in HAp. From the cytotoxicity analysis against NIH 3T3 fibroblast, it was observed that the Mg incorporated HAp/CTS composite was less toxic than the MHO/CTS composite. From this result, it was concluded that the MH/CTS nanocomposites coated implant is the excellent material for implants.

[The biocompatibility testing of various types of nonorganic implants].

Impact of living organism on nonorganic materials, which are applied for the implants manufacturing, was studied. There was established, that organism of a recipient patient actively effects on exogenic material, destroying its superficial layer and forming the connective tissue capsule around the implant. The implant surface may start to dissolve selectively as a result of aseptic inflammation, keeping around, in such a situation it become necessary to remove the prostheses, which have lost their function. Impact of organism on surface of different implants of nonorganic origin and the ways of it prophylaxis were investigated. Instrumental method of the preoperative compatibility testing between a recipient organism and the implant material, using the atomic-power microscope, was proposed.

Elimination of detached Listeria monocytogenes from the biofilm on stainless steel surfaces during milk and cheese processing using natural plant extracts.

Bacterial cells can form biofilm on food contact surfaces, becoming a source of food contamination with profound health implications. The current study aimed to determine some Egyptian medicinal plants antibacterial and antibiofilm effects against foodborne bacterial strains in milk plants. Results indicated that four ethanolic plant extracts, Cinnamon (Cinnamomum verum), Chamomile (Matricaria chamomilla), Marigold (Calendula officinalis), and Sage (Salvia officinalis), had antibacterial (12.0-26.5 mm of inhibition zone diameter) and antibiofilm (10-99%) activities against Staphylococcus aureus, Bacillus cereus, Listeria monocytogenes and Salmonella Typhimurium. The tested extracts had minimum inhibitory concentration values between 0.14 and 2.50 mg/ml and minimum bactericidal concentration values between 0.14 and 12.50 mg/ml. L. monocytogenes was more sensitive for all tested ethanolic extracts; Sage and Cinnamon showed a bacteriocidal effect, while Chamomile and Marigold were bacteriostatic. The ethanolic extracts mixture from Chamomile, Sage, and Cinnamon was chosen for its antibiofilm activity against L. monocytogenes using L-optimal mixture design. Gas chromatography and mass spectrometry analysis showed that this mixture contained 12 chemical compounds, where 2-Propenal,3-phenyl- had the maximum area % (34.82%). At concentrations up to 500 µg/ml, it had no cytotoxicity in the normal Vero cell line, and the IC50 value was 671.76 ± 9.03 µg/ml. Also, this mixture showed the most significant antibacterial effect against detached L. monocytogenes cells from formed biofilm in stainless steel milk tanks. At the same time, white soft cheese fortified with this mixture was significantly accepted overall for the panelist (92.2 ± 2.7) than other cheese samples, including the control group.

Application of an Antibacterial Coating Layer via Amine-Terminated Hyperbranched Zirconium-Polysiloxane for Stainless Steel Orthodontic Brackets.

The massive growth of various microorganisms on the orthodontic bracket can form plaques and cause diseases. A novel amine-terminated hyperbranched zirconium-polysiloxane (HPZP) antimicrobial coating was developed for an orthodontic stainless steel tank (SST). After synthesizing HPZP and HPZP-Ag coatings, their structures were characterized by nuclear magnetic resonance spectroscopy, scanning electron microscopy, thickness measurement, contact angle detection, mechanical stability testing, and corrosion testing. The cell toxicity of the two coatings to human gingival fibroblasts (hGFs) and human oral keratinocytes (hOKs) was detected by cell counting kit eight assays, and SST, HPZP@SST, and HPZP-Ag@SST were cocultured with Staphylococcus aureus, Escherichia coli, and Streptococcus mutans for 24 hr to detect the antibacterial properties of the coatings, respectively. The results show that the coatings are about 10 µm, and the water contact angle of HPZP coating is significantly higher than that of HPZP-Ag coating (P < 0.01). Both coatings can be uniformly and densely distributed on SST and have good mechanical stability and corrosion resistance. The cell counting test showed that HPZP coating and HPZP-Ag coating were less toxic to cells compared with SST, and the toxicity of HPZP-Ag coating was greater than that of HPZP coating, with the cell survival rate greater than 80% after 72 hr cocultured with hGFs and hOKs. The antibacterial test showed that the number of bacteria on the surface of different materials was ranked from small to large: HPZP@SST < HPZP-Ag@SST < SST and 800 µg/mL HPZP@SST showed a better bactericidal ability than 400 µg/mL after cocultured with S. aureus, E. coli, and S. mutans, respectively (all P < 0.05). The results showed that HPZP coating had a better effect than HPZP-Ag coating, with effective antibacterial and biocompatible properties, which had the potential to be applied in orthodontic process management.

Pulsed electric field mediated in vitro cellular response of fibroblast and osteoblast-like cells on conducting austenitic stainless steel substrate.

This article reports the intermittent pulse electric field stimulus mediated in vitro cellular response of L929 mouse fibroblast/SaOS2 osteoblast-like cells on austenitic steel substrates in reference to the field strength dependent behavior. The cellular density and morphometric analyses revealed that the optimal electric (E) fields for the maximum cell density of adhered L929 (~270 % to that of untreated sample) and SaOS2 (~280 % to that of untreated sample) cells are 1 V (0.33 V/cm) and 2 V (0.67 V/cm), respectively. The trend in aspect ratio of elongated SaOS2 cells did not indicate any significant difference among the untreated and treated (up to 3.33 V/cm) cells. The average cell and nucleus areas (for SaOS2 cells) were increased with an increase in the applied voltage up to 8 V (2.67 V/cm) and reduced thereafter. However, the ratio of nucleus to total cell area was increased significantly on the application of higher voltages (2-10 V), indicating the possible influence of E-field on cell growth. Further, the cell density results were compared with earlier results obtained with sintered Hydroxyapatite (HA) and HA-BaTiO3 composites and such comparison revealed that the enhanced cell density on steel sample occurs upon application of much lower field strength and stimulation time. This indicates the possible role of substrate conductivity towards cell growth in pulsed E-field mediated culture conditions.

[In vitro evaluation of antibacterial activity and cytocompatibility of antibacterial stainless steel containing copper].

To study the in vitro antibacterial activity and biocompatibility of 317L stainless steel containing 4.5% copper alloy (317L-Cu), we produced 317L-Cu stainless steel with epsilon-Cu phase. The cell proliferation of osteoblasts on material surface was detected in vitro. Escherichia coli was cultured with 317L-Cu for evaluating the antibacterial activity. We found that the 317L-Cu could effectively kill the Escherichia coli on material surface. The cell proliferation of osteoblasts on material surface was not different significantly, compared with titanium material. Our study clearly demonstrated that the 317L-Cu alloys had a significant antimicrobial activity and was biocompatible in vitro, so it would be suitable to be used as a new medical material with antibacterial activity.

Prevention of surface colonization and anti-biofilm effect of selected phytochemicals against Listeria innocua strain.

This work aimed to determine the ability of Listeria innocua (L.i.) to colonize eight materials found in food-processing and packaging settings and to evaluate the viability of the sessile cells. We also selected four commonly used phytochemicals (trans-cinnamaldehyde, eugenol, citronellol, and terpineol) to examine and compare their efficacies against L.i. on each surface. Biofilms were also deciphered in chamber slides using confocal laser scanning microscopy to learn more about how phytochemicals affect L.i. The materials tested were silicone rubber (Si), polyurethane (PU), polypropylene (PP), polytetrafluoroethylene (PTFE), stainless steel 316 L (SS), copper (Cu), polyethylene terephthalate (PET), and borosilicate glass (GL). L.i. colonized Si and SS abundantly, followed by PU, PP, Cu, PET, GL, and PTFE surfaces. The live/dead status ranged from 65/35% for Si to 20/80% for Cu, and the estimates of cells unable to grow on Cu were the highest, reaching even 43%. Cu was also characterized by the highest degree of hydrophobicity (ΔGTOT = -81.5 mJ/m2). Eventually, it was less prone to attachment, as we could not recover L.i. after treatments with control or phytochemical solutions. The PTFE surface demonstrated the least total cell densities and fewer live cells (31%) as compared to Si (65%) or SS (nearly 60%). It also scored high in hydrophobicity degree (ΔGTOT = -68.9 mJ/m2) and efficacy of phytochemical treatments (on average, biofilms were reduced by 2.1 log10 CFU/cm2). Thus, the hydrophobicity of surface materials plays a role in cell viability, biofilm formation, and then biofilm control and could be the prevailing parameter when designing preventive measures and interventions. As for phytochemical comparison, trans-cinnamaldehyde displayed greater efficacies, with the highest reductions seen on PET and Si (4.6 and 4.0 log10 CFU/cm2). The biofilms in chamber slides exposed to trans-cinnamaldehyde revealed the disrupted organization to a greater extent than other molecules. This may help establish better interventions via proper phytochemical selection for incorporation in environment-friendly disinfection approaches.

Effect of Mauritia flexuosa L. leaf extract on Staphylococcus aureus and Staphylococcus haemolyticus biofilms adhered to stainless steel surface.

Staphylococcus spp. represents the main mastitis agents in ruminants and contaminants of milk due to their expressive capacity to make biofilms. The aims in this study was evaluate evaluated the antimicrobial activity of Mauritia flexuosa L. extracts against Staphylococcus spp. adhered to a stainless steel surface. Two isolates from cows with clinical mastitis were evaluated; one was identified as Staphylococcus aureus, and the other Staphylococcus haemolyticus. Additionally the ATCC 25923 strain, S. aureus from human was evaluated. The chemical profile obtained from gas chromatography revealed the presence of carbohydrates, organic acids, and flavonoids. The minimum bactericidal concentrations of the ethanolic extract (EE) and aqueous extract (AE) were 4.4 and 5.82 mg/mL, respectively. After EE treatment at 4.4 mg/mL for 2.5 min, total removal of mature biofilms grown on stainless steel coupons was observed (reduction by 3.85-4.81 log units). This extract from M. flexuosa shows potential as an effective sanitizer and may represent a natural alternative against Staphylococcus spp.

Utilization of Piper betle L. Extract for Inactivating Foodborne Bacterial Biofilms on Pitted and Smooth Stainless Steel Surfaces.

Biofilms are a significant concern in the food industry. The utilization of plant-derived compounds to inactivate biofilms on food contact surfaces has not been widely reported. Also, the increasing negative perception of consumers against synthetic sanitizers has encouraged the hunt for natural compounds as alternatives. Therefore, in this study we evaluated the antimicrobial activities of ethanol extracts, acetone extracts, and essential oils (EOs) of seven culinary herbs against Salmonella enterica serotype Typhimurium and Listeria innocua using the broth microdilution assay. Among all tested extracts and EOs, the ethanol extract of Piper betle L. exhibited the most efficient antimicrobial activities. To evaluate the biofilm inactivation effect, S. Typhimurium and L. innocua biofilms on pitted and smooth stainless steel (SS) coupons were exposed to P. betle ethanol extract (12.5 mg/ml), sodium hypochlorite (NaClO; 200 ppm), hydrogen peroxide (HP; 1100 ppm), and benzalkonium chloride (BKC; 400 ppm) for 15 min. Results showed that, for the untreated controls, higher sessile cell counts were observed on pitted SS versus smooth SS coupons. Overall, biofilm inactivation efficacies of the tested sanitizers followed the trend of P. betle extract ≥ BKC > NaClO > HP. The surface condition of SS did not affect the biofilm inactivation effect of each tested sanitizer. The contact angle results revealed P. betle ethanol extract could increase the surface wettability of SS coupons. This research suggests P. betle extract might be utilized as an alternative sanitizer in food processing facilities.