[Application of multicomponent dissolution evaluation method of biopharmaceutics classification system of Chinese materia medica in gegen qinlian tablets].

The study is a paticular embodiment of Chinese patent medicine based on biopharmaceutics classification system of Chinese materia medica (CMMBCS) , focusing on assessment of synchronization issues of dissolution that may affect the timing of the multicomponent absorption. The accumulative dissolution percentages of nine components in Gengen Qinlian tablets in different dissolution solvents and times were determined by HPLC. The dissolution curve was drew and its similarity was evaluated by similarity factors (f2) and cluster method. Results in this experiment showed that the components that peak 7 and peak 8 (baicalin) represented had poor similarity with the reference peak 2 (puerarin). Their similarity factors were both 43 in water dissolution media and 31 and 45 in pH 7.4 dissolution media, respectively. Components that peaks represented had better similarity with the reference peak 2 (puerarin) in other medium. It illustrated that components that peak 3,4,5,6 (berberine) represented had fully synchronous dissolution characteristics with the reference peak 2 (puerarin), components peak 1 and 9 represented had nearly fully synchronous dissolution characteristics with the reference peak 2 (puerarin), while components that peak 7 and 8 (baicalin) represented had no synchronous dissolution characteristics with the reference peak 2 (puerarin).

Solid dispersion in pharmaceutical technology. Part II. The methods of analysis of solid dispersions and examples of their application.

In the first part of the article solid dispersions were classified the properties and methods of their preparation were described. This section presents methods of analysis of solid dispersions i.e.: thermoanalytical methods, XRPD, FTIR, microscopic methods, dissolution studies and examples of drug forms where solid dispersions were used.

[Eurand Minitabs--the innovative application formula of a pancreatic enzyme complex (Pangrol 10,000, 25,000)]. / Eurand Minitabs--innowacyjna formula aplikacji kompleksu enzymatycznego pankreatyny (Pangrol 10,000, 25,000).

Modern technology of solid oral drug forms, through the application of macromolecular polymers, generates a number of new formulation solutions. New technologies provide optimal parameters for the release of biologically active substances, increasing by these means pharmacotherapeutic effectiveness of a medicinal product. Basic properties of the innovative Eurand Minitabs technology, making possible the tableting of technologically and applicatively labile substances such as a pancreatic enzyme complex were dicussed. The application of encapsulated minitablets coated with a methacrylic acid copolymer guarantees an optimal range of lipase pharmacological activity.

Effect of iron content on the tolerability of prenatal multivitamins in pregnancy.

BACKGROUND: Gastrointestinal irritability can deter pregnant women from starting or continuing prenatal multivitamin supplementation. In a previous study, suboptimal tolerability was observed among pregnant women taking a large tablet (18 mm x 8 mm x 8 mm) multivitamin with high elemental iron content (60 mg as ferrous fumarate). The objective of the present study was to compare rates of adherence and reported adverse events among pregnant women who were randomized to commence supplementation with a small-tablet prenatal multivitamin, containing either low or high iron content. METHODS: Pregnant women who called the Motherisk Program (Hospital for Sick Children, Toronto) and had not started taking or had discontinued any multivitamin due to adverse events were included in this prospective, randomized, open-label, 2-arm study. Women were randomized to take a small-size (16 mm x 9 mm x 4 mm), low elemental iron content (35 mg as ferrous fumarate) multivitamin ('35 mg' group); or a small-size (5 mm radius, 5 mm thickness), high elemental iron content (60 mg as ferrous sulphate) multivitamin ('60 mg' group). Follow-up interviews documented pill intake and adverse events. Rates of adherence and adverse events were compared between groups using chi-squared tests and Kaplan-Meier survival curves. RESULTS: Of 167 randomized women, 92 in the '35 mg' group and 75 in the '60 mg' group were included in the analysis. Despite ideal conditions and regular follow-ups, mean adherence based on pill intake recall, in both groups was approximately 50%. No statistically significant difference was detected in proportions of women who actually started taking either multivitamin. Among those who started, no difference was detected in rates of adherence or reported adverse events. CONCLUSION: The present results suggest that iron content is not a major determinant of adherence to prenatal multivitamins. Combined with our previous study, tablet size may be the more definitive factor affecting adherence.

Development of microparticles and microparticulated tablets containing piperine

Abstract Piper nigrum (black pepper) is used in Indian traditional medicine and its main alkaloid, Piperine (PIP), presents antioxidant, antitumor and neuroprotective pharmacological properties. This substance is insoluble in aqueous media and can irritate the gastrointestinal tract. Aiming to avoid these inconvenient characteristics and enable PIP oral administration, this study suggested the PIP microencapsulation through the emulsion-solvent evaporation method and the preparation of microparticulated tablets by direct compression. An UV-spectroscopy method was validated to quantify PIP. Microparticles and microparticulated tablets were successfully obtained and the microparticles exhibited excellent flow. The scanning electron microscopy images showed that PIP microparticles were intact after compression. The in vitro release showed a controlled release of PIP from microparticles and PIP microparticles from tablets in comparison to PIP and PIP tablets. The release profiles of PIP microparticles and the microparticulated tablets were similar. Therefore, tablets containing PIP microparticles are promising multiparticulated dosage forms because a tablet allows microparticles administration and the intact ones promote a controlled release, decreasing its irritating potential on the mucosa.

Optimization of HPLC method using central composite design for estimation of Torsemide and Eplerenone in tablet dosage form

Abstract A simple, precise, accurate and robust high performance liquid chromatographic method has been developed for simultaneous estimation of Torsemide and Eplerenone in tablet dosage form. Design of experiment was applied for multivariate optimization of the experimental conditions of RP-HPLC method. A Central composite design was used to study the response surface methodology and to analyse in detail the effects of these independent factors on responses. Total eleven experiments along with 3 center points were performed. Two factors were selected to design the matrix, one factor is variation in ratio of Acetonitrile and the second factor is flow rate (mL/min). Optimization in chromatographic conditions was achieved by applying Central composite design. The optimized and predicted data from contour diagram comprised mobile phase (acetonitrile, water and methanol in the ratio of 50: 30: 20 v/v/v respectively), at a flow rate of 1.0 ml/min and at ambient column temperature. Using these optimum conditions baseline separation of both drugs with good resolution and run time of less than 5 minutes were achieved. The optimized assay conditions were validated as per the ICH guidelines (2005). Hence, the results showed that the Quality by design approach could successfully optimize RP-HPLC method for simultaneous estimation of Torsemide and Eplerenone.

Quality control and drug-drug interactions between commercially available Metoprolol and Glimepiride tablets

Abstract Quality is paramount and needs to be maintained throughout the shelf life of pharmaceuticals. The current study aimed to evaluate the quality, potency, and drug-drug interaction in an in vivo animal model by using two drugs, namely, metoprolol and glimepiride. Tablets were selected for their physical characteristics, such as shape, size, and color. Quality control tests, such as weight variation, hardness, friability, and disintegration tests, and invitro drug release studies were performed as per USP. Drug-drug interaction and in vivo studies were carried out according to the standard protocol of the animal ethics committee. Quality control tests of both the tablets were within the specified range. The cumulative release percentages of the drugs were 81.12% and 85.36% for Metoprolol Tartrate and Glimepiride, respectively, in a physiological buffer solution within 1 h. The combination of metoprolol and Glimepiride also significantly decreased the blood glucose level in diabetic animals. However, the blood glucose level increased in the group receiving metoprolol only, but the difference was not significant. The result suggested that the formulations are safe. However, the chronic use of this combination requires frequent monitoring of blood glucose level to improve its efficacy and for the patient's safety.

Augmentation of near infrared diffuse reflectance and transmittance spectral data for the development of robust PLSBC models for classifying double blind clinical trial tablets.

The water content of clinical trial tablets can be different between and within different tablet batches, depending on the relative humidity conditions during their production, packaging, storage and analysis. These water variations lead to important spectral variations in the near infrared spectral region which can lead to a wrong identification if the classification model was based on unrepresentative data towards the water content. As model development for clinical trial studies needs to be extremely fast - within one working day - with generally only one batch available, the principle of data augmentation has to be applied to render more robust classification models. Therefore, tablets available for constructing the model are being processed in order to increase or decrease their water content and to make them more representative for tablets to be tested in the future. The inclusion of a deliberate water variation is the most efficient way to develop a model, for which no additional model redevelopment will be required to pass the system suitability tests and to obtain a correct identification.

Pre-trial evaluation of the potential for unblinding in drug trials: a prototype example.

Blinding is an important design feature of randomised trials that may reduce bias in the results, compared to the situation where blinding is not possible or is not maintained. The literature provides some guidance for the evaluation of blinding in ongoing or completed studies, but the question of pre-trial assessment of the potential for unblinding has not been addressed. This paper describes the design and analysis of a prototype experiment for the pre-trial assessment of blinding in a drug trial. This work was motivated by a trial using antibiotic therapy, in which the investigators were concerned about the possibility of subjects being able to differentiate active medication from placebo, and thus become unblinded to their treatment assignment. A small experiment was mounted in which participants had to divide a random mixture of tablets into two groups. Statistical methods were developed to calculate the probability of a given number of similar tablets being classified into the same group by chance, with a modification to allow for some participants having constrained their responses to have equal numbers of tablets in each group. Differentiation of tablets by taste (the initial concern of the investigators) was not statistically different from chance. A smaller set of data on differentiation by appearance (a possibility not originally considered) had borderline statistical significance. After reviewing all these results, the investigators decided to proceed with the study without modifying the tablets, in part because subjects in the study would be unlikely to compare the two types of medication side-by-side. Our results suggest that blinding might sometimes be compromised in unexpected ways. Whenever possible, we suggest that similar and larger such experiments be carried out before the trial to assess whether blinding might be compromised. The methods proposed here could easily be adapted to evaluate the results of such experiments.

Classification of drug tablets using hyperspectral imaging and wavelength selection with a GAWLS method modified for classification.

Right drug tablets must be brought to the right places. We apply hyperspectral imaging, which can measure infrared spectra at many points on a two-dimensional plane, to classify tablets correctly. The k-nearest neighbor algorithm (kNN) is employed to classify tablets using a database including their spectra and true classes. Although classification accuracy is not 100%, we can correctly classify tablets overall, since spectra at many points are measured with spectroscopy and misclassification at some points does not have much influence on the final tablet classification result. In addition, we propose a wavelength selection method for classification. Genetic algorithm-based wavelength selection is applied to classification and combined with kNN, and thus, not wavelengths but wavelength-regions can be selected in classification problems. Through a case study, we confirmed that the proposed method could classify three kinds of tablets correctly and select appropriate wavelength-regions.

Drug name confusion: evaluating the effectiveness of capital ("Tall Man") letters using eye movement data.

Medication errors commonly involve confusion between drug names that look or sound alike. One possible method of reducing these errors is to print sections of the names in "Tall Man" (capital) letters, in order to emphasise differences between similar products. This paper reports an eye-tracking experiment that evaluates this strategy. Participants had their eye movements monitored while they searched for a target product amongst an array of product packs. The target pack was replaced by a similar distractor in the array. Participants made fewer errors when the appearance of the names had been altered, that is, they were less likely to incorrectly identify a distractor as the target drug. This result was reflected in the eye movement data.

Comparison of classification approaches applied to NIR-spectra of clinical study lots.

NIR-spectroscopy combined with pattern recognition approaches is applied to classify samples of clinical study lots in the pharmaceutical industry. The performance of linear discriminant analysis (LDA), quadratic discriminant analysis (QDA) and K-nearest neighbour (KNN) method is evaluated on a tablet data set and a capsule data set. To establish a classification model a strategy is followed, which is described in this work. Frequently, in the pharmaceutical industry, several batches of the same clinical study lot are produced. We tested whether it is possible to merge several batches in one class for modelling or, instead, whether it is necessary to model each batch individually.

Stability-indicating capillary zone electrophoresis assay for the analysis of linezolid in tablets

A simple and fast alternative methodology using capillary zone electrophoresis (CZE) to analyze linezolid and its cationic photodegradation products in tablets has been developed. The separation was carried out on fused silica capillary and conducted using 100 mM formic acid (pH 3.0) and by applying 30 KV voltage. Detection was performed at UV 254 nm. The optimized method was validated in terms of linearity, limits of detection and quantification, precision (repeatability), stability studies (selectivity) and accuracy. Good linearity (8-20 mg L-1) was obtained and the limit of detection was 0.95 mg L-1. The greatest advantages of the CZE method were the rapid set-up of instrumentation and capillary equilibration, short analysis time (12 min), low running cost and low waste generation. The method showed good stability in determining linezolid submitted to degradation by light and to a climatic chamber and can be used as an alternative for evaluation in stability studies of linezolid in tablets, as well as for the analysis of the drug in raw materials and finished products.

Pharmacokinetics and safety of repirinast tablets in healthy Chinese subjects

ABSTRACT Repirinast is a new, synthetic, disodium cromoglycate-like antiallergic agent for oral administration in humans. This study evaluated the safety, tolerability and pharmacokinetics of repirinast tablets in healthy Chinese volunteers. This was a phase I, open-label, randomized, single- and multiple-dose study. Subjects were assigned to receive a single dose of repirinast tablet at either 150, 300, or 450 mg, or multiple doses of 150 mg twice daily for 5 days. Plasma samples were analyzed with LC-MS/MS. Pharmacokinetic parameters of active metabolite MY-1250 (deesterified repirinast) were calculated using non-compartmental analysis with WinNonlin software. Statistical analysis was performed using SPSS software. All adverse events (AEs) were mild and of limited duration. No serious adverse event (SAE), death or withdrawal from the study was observed. In the single-dose study, Cmax was reached at about 0.75 hour, and the mean t1/2 was approximately 16.21 hours. Area under curve (AUC) and Cmax increased with dose escalation, but dose proportionality was not observed over the range of 150 to 450 mg. In the multiple-dose study, the steady-state was reached within 3 days with no accumulation. Repirinast tablet was well tolerated in healthy Chinese subjects.

Solubility and dissolution enhancement of flurbiprofen by solid dispersion using hydrophilic carriers

ABSTRACT The intent of the current work is to study the effect of polyethylene glycol 8000 and polyethylene glycol 10000 as hydrophilic carriers on dissolution behaviour of flurbiprofen. In the present study, solvent evaporation method was used to prepare flurbiprofen solid dispersions and evaluated for physico-chemical properties, drug-carrier compatibility studies and dissolution behaviour of drug. Solubility studies showed more solubility in higher pH values and formulations SD4 and SD8 were selected to prepare the fast dissolving tablets. FTIR and DSC study showed no interaction and drug was dispersed molecularly in hydrophilic carrier. XRD studies revealed that there was change in the crystallinity of the drug. The results of In vitro studies showed SD8 formulation confer significant improvement (p<0.05) in drug release, Q20 was 99.08±1.35% compared to conventional and marketed tablets (47.31±0.74% and 56.86±1.91%). The mean dissolution time (MDT) was reduced to 8.79 min compared to conventional and marketed tablets (25.76 and 22.22 min.) indicating faster drug release. The DE (% dissolution efficiency) was increased by 2.5 folds (61.63%) compared to conventional tablets (23.71%). From the results, it is evident that polyethylene glycol solid dispersions in less carrier ratio may enhance the solubility and there by improve the dissolution rate of flurbiprofen.

Laser-induced breakdown spectroscopy-based investigation and classification of pharmaceutical tablets using multivariate chemometric analysis.

We report the effectiveness of laser-induced breakdown spectroscopy (LIBS) in probing the content of pharmaceutical tablets and also investigate its feasibility for routine classification. This method is particularly beneficial in applications where its exquisite chemical specificity and suitability for remote and on site characterization significantly improves the speed and accuracy of quality control and assurance process. Our experiments reveal that in addition to the presence of carbon, hydrogen, nitrogen and oxygen, which can be primarily attributed to the active pharmaceutical ingredients, specific inorganic atoms were also present in all the tablets. Initial attempts at classification by a ratiometric approach using oxygen (∼777 nm) to nitrogen (742.36 nm, 744.23 nm and 746.83 nm) compositional values yielded an optimal value at 746.83 nm with the least relative standard deviation but nevertheless failed to provide an acceptable classification. To overcome this bottleneck in the detection process, two chemometric algorithms, i.e. principal component analysis (PCA) and soft independent modeling of class analogy (SIMCA), were implemented to exploit the multivariate nature of the LIBS data demonstrating that LIBS has the potential to differentiate and discriminate among pharmaceutical tablets. We report excellent prospective classification accuracy using supervised classification via the SIMCA algorithm, demonstrating its potential for future applications in process analytical technology, especially for fast on-line process control monitoring applications in the pharmaceutical industry.

A suppository-base-matrix tablet for time-dependent colon-specific delivery system

Our research has focused on the main design features and release performances of time-dependent colon-specific (TDCS) delivery tablets, which relies on the relative constancy that is observed in the small intestinal transit time of dosage forms. But inflammatory bowel disease（IBD）can affect the transit time, and usually results in watery stool. Compared to the TDCS and wax-matrix TDCS tablet, a promising time-dependent colon-specific delivery system was investigated. In our study, a suppository-base-matrix coated tablet was evaluated. Water soluble suppository-base helps the expansion of tablet, facilitates uniform film dissolution and achives high osmotic pressure. Combining the expansion of carboxymethyl starch sodium (CMS-Na) and the moisture absorption of NaCl, the coated TDCS tablet obtained a burst and targeted drug delivery system. A very good correlation between in vitro drug release and in vivo outcome was observed. This TDCS coated tablet provides a promising strategy to control drug release to the desired lower gastrointestinal region.

Nossa pesquisa focou-se nas principais características de planejamento e de desempenho de liberação cólon-específica tempo-dependente (TDCS) de comprimidos, que leva em conta a constância relativa observada no tempo de trânsito intestinal das formas de dosagem. A doença inflamatória do intestino (IBD) pode afetar o tempo de trânsito e, geralmente, resulta em fezes aquosas. Comparando ao TDCS e a comprimidos TDCS com matriz-cerosa, investigou-se sistema promissor de liberação cólon-específica tempo-dependente. Em nosso estudo, avaliou-se comprimido revestido com matriz base de supositório. A base de supositório solúvel em água auxilia a expansão do comprimido, facilita a dissolução uniforme do filme e atinge alta pressão osmótica. Associando a expansão do carboximetil amido sódico (CMS-Na) à absorção de umidade do NaCl, o comprimido revestido TDCS originou sistema de liberação direcionado e de erupção. Observou-se correlação muito boa entre a liberação in vitro e a in vivo do fármaco. Este comprimido revestido TDCS representa estratégia promissora para o controle da liberação do fármaco na região gastrintestinal mais baixa.