Developing a three-dimensional statistical shape model of normal dentition using an automated algorithm and normal samples.

OBJECTIVES: The statistical shape model (SSM) is a model of geometric properties of a set of shapes based on statistical shape analysis. The SSM develops an average model of several objects using an automated algorithm that excludes the operator's subjectivity. The aim of this study was to develop a three-dimensional (3D) SSM of normal dentition to provide virtual templates for efficient treatment. MATERIALS AND METHODS: Dental casts were obtained from participants with normal dentition. After acquiring the 3D models, the SSMs of the individual teeth and whole dental arch were generated by an iterative closest point (ICP)-based rigid registration and point correspondences, respectively. Then, the individual tooth SSM was aligned to the whole dental arch SSM using ICP-based registration to generate an average model of normal dentition. RESULTS: The generated 3D SSM showed specific morphological features of normal dentition similar to those previously reported. Moreover, on measuring the arch dimensions, all values in this study were similar to those previously reported using normal dentition. CONCLUSIONS: The 3D SSM of normal dentition may increase the diagnostic efficiency of orthodontic treatments by providing a visual objective. It can be also used as a 3D template in various fields of dentistry. CLINICAL RELEVANCE: Our SSM of normal dentition provides both quantitative and qualitative information on the 3D morphology of teeth and dental arches, which may provide valuable information on 3D virtual-setup, bracket fabrication, and aligner treatment.

Association between Condylar Bone Density and Disk Displacement in the Temporomandibular Joint.

Measuring bone density (BD) is a common method of determining bone quality; however, the relationship between condylar BD and the occurrence of temporomandibular joint (TMJ) disorders has not been investigated. To address this knowledge gap, we aimed to investigate condylar BD in terms of TMJ disk displacement (TMJ DD) using computed tomography (CT) and magnetic resonance imaging (MRI). We classified TMJ MRI results according to the position of the disk: normal disk position (Normal), anterior disk displacement with reduction (ADDR), and anterior disk displacement without reduction (ADDNR). After retrospectively evaluating 86 female condyles, we determined the total, cortical, and trabecular BD in the upper-joint portion of the condyle and the whole condyle using CT data. To standardize condylar BD, we calculated the BD ratios by dividing the condylar BD by the cervical axis BD. The Kruskal-Wallis test analyzed the differences in BD measurements in the TMJ DD patient groups and showed significant between-group differences in condylar BD. The total and trabecular BD was significantly higher in ADDNR condyles than in Normal or ADDR condyles (Normal = ADDR < ADDNR). However, there was no significant difference in the cortical BD among the three TMJ DD groups. The BD ratios showed a similar tendency with condylar BD. These results suggest that increased condylar BD - specifically total and trabecular BD - may be significantly associated with ADDNR condyles. Our findings will help clinicians determine the course of treatment for patients with disk-related TMJ disorders.

Treatment effects of functional appliances in children with Class II malocclusion with and without morphologic deviations in the upper spine.

INTRODUCTION: This research aimed to compare treatment effects of functional appliances between children with and without morphologic deviations in the upper spine and analyze associations between Atlas dimensions and the short- and long-term treatment effects. METHODS: Sixty-eight prepubertal or pubertal children (35 boys and 33 girls; mean age, 11.47 ± 1.39 years) treated with Class II functional appliances were included. Lateral cephalograms were taken at pretreatment (T1), postfunctional appliance treatment (T2), and after retention at postpuberty (T3). Upper spine morphology and Atlas dimensions were evaluated at T1. T1-T2 and T1-T3 lateral cephalograms were superimposed using a structural method. Changes in the jaws were compared with multiple linear regression analysis between children with and without deviations in the upper spine. Associations between the changes and Atlas dimensions were analyzed by partial correlation. RESULTS: Children with morphologic deviations in the upper spine showed significantly more backward rotation of the mandible (P <0.01) and increased inclination of the jaws (P <0.05, P <0.01) from T1-T2 and significantly smaller condylar growth (P <0.01) from T1-T3 compared with children without the deviations. Atlas height was significantly associated with vertical and rotational changes in the mandible (P <0.01) from T1-T2 and condylar growth (P <0.05) from T1-T2 and T1-T3. CONCLUSIONS: Morphologic deviations in the upper spine and low Atlas height were significantly associated with smaller condylar growth induced by functional appliances in the long term. Upper spine morphology and the Atlas dimension may be valuable in phenotypic differentiation in children with Class II malocclusion for optimal treatment outcome.

Comparison of dentoskeletal and soft tissue changes between tooth-borne and tooth-bone-borne hybrid nonsurgical rapid maxillary expansions in adults: a retrospective observational study.

BACKGROUND: Despite the gradual increase in the use of rapid maxillary expansion (RME), specifically RME with the aid of skeletal anchorage in adults, there have been no reports comparing dentoskeletal and soft tissue changes between nonsurgical tooth-borne and tooth-bone-borne RMEs in adults. This study aimed to analyse differences in dentoskeletal and soft tissue changes between tooth-borne and tooth-bone-borne RMEs using a similar appliance design and the same expansion protocol in adult patients. METHODS: Twenty-one patients with tooth-borne expansion (a conventional expansion screw with two premolars and two molar bands for dental anchorage [T-RME]) and the same number of patients with tooth-bone-borne hybrid expansion (a conventional expansion screw with two premolar and two molar bands for dental anchorage and four mini-implants in the palate for skeletal anchorage [H-RME]) were included. Dentoskeletal and soft tissue variables at pretreatment (T1) and after expansion (T2) were measured using posteroanterior and lateral cephalograms and frontal photographs. The sex distribution of the two groups was analysed using the chi-square test, and the change after RME in each group was evaluated using the Wilcoxon signed-rank test. Differences in pretreatment age, expansion duration, post-expansion duration, and dentoskeletal and soft tissue changes after RME between the two groups were determined using the Mann-Whitney U test. RESULTS: There were no significant differences in the expansion protocol, pretreatment conditions, and sex distribution between the two groups. Despite similar degrees of dental expansion at the crown level between the two groups, H-RME induced increased skeletal and parallel expansion of the maxilla compared to T-RME. After expansion, H-RME demonstrated increased forward displacement of the maxilla without significant changes in the vertical dimension, while T-RME exhibited increased backward displacement of the mandible, increased vertical dimension, and decreased overbite. Both groups showed significant retroclination and extrusion of the maxillary incisors without significant intergroup differences. There were no significant soft tissue changes between the two groups. CONCLUSION: This study suggests that using skeletal anchorage in RME may induce increased skeletal and parallel expansion of the maxilla without significant effects on the vertical dimension.

Effect of Bisphenol A Glycol Methacrylate on Virulent Properties of Streptococcus mutans UA159.

Bisphenol A glycidyl methacrylate (bis-GMA), which is released into the oral environment by dental composites through incomplete polymerization, hydrolysis, and mechanical degradation, can significantly influence oral ecology around resin-based materials. The purpose of this study was to investigate how bis-GMA changes the virulence properties of Streptococcus mutans, a major cariogenic bacterium in humans. The results show that bis-GMA not only inhibited the planktonic growth of cells in medium containing glucose, fructose, or mannose, but also reduced the viability of S. mutans. However, the presence of bis-GMA increased sugar transport and intracellular polysaccharide accumulation in S. mutans, thereby increasing the potential of cell persistence. In addition, bis-GMA could enhance S. mutans's adhesion to hard surfaces and glucan synthesis, which could contribute to biofilm formation. Although free bis-GMA made cells vulnerable to acidic stress, it also provided increased resistance to hydrogen peroxide, which might confer an advantage in competition with other oral microorganisms during the early stage of biofilm development. Interestingly, the presence of bis-GMA did not change the ability of S. mutans to interact with saliva. The results suggest that leachable bis-GMA could contribute to biofilm-related secondary dental caries at the marginal interface between resin-based materials and teeth by altering the virulent properties of S. mutans, although bis-GMA reduced the planktonic growth and viability of S. mutans.

Artificial Intelligent Model With Neural Network Machine Learning for the Diagnosis of Orthognathic Surgery.

Diagnosis and treatment planning are the most important steps in the orthognathic surgery for the successful treatment. The purpose of this study was to develop a new artificial intelligent model for surgery/non-surgery decision and extraction determination, and to evaluate the performance of this model. The sample used in this study consisted of 316 patients in total. Of the total sample, 160 were planned with surgical treatment and 156 were planned with non-surgical treatment. The input values of artificial neural network were obtained from 12 measurement values of the lateral cephalogram and 6 additional indexes. The artificial intelligent model of machine learning consisted of 2-layer neural network with one hidden layer. The learning was carried out in 3 stages, and 4 best performing models were adopted. Using these models, decision-making success rates of surgery/non-surgery, surgery type, and extraction/non-extraction were calculated. The final diagnosis success rate was calculated by comparing the actual diagnosis with the diagnosis obtained by the artificial intelligent model. The success rate of the model showed 96% for the diagnosis of surgery/non-surgery decision, and showed 91% for the detailed diagnosis of surgery type and extraction decision. This study suggests the artificial intelligent model using neural network machine learning could be applied for the diagnosis of orthognathic surgery cases.

Microbial changes in biofilms on composite resins with different surface roughness: An in vitro study with a multispecies biofilm model.

STATEMENT OF PROBLEM: The single-species biofilm method cannot represent the interaction and complex functions of microorganisms associated with oral biofilms. PURPOSE: The purpose of this in vitro study was to investigate microbial changes in biofilms on composite resins of varying surface roughness by using a multispecies biofilm model with early-colonizing streptococci, middle colonizer, and late-colonizing gram-negative anaerobes. MATERIAL AND METHODS: Composite resin disks were prepared with different roughness: SR180, SR400, SR1500, and SRGlass roughened with 180-, 400-, and 1500-grit silicon carbide paper and glass (control surface without surface roughening). Surface roughness was analyzed by confocal laser scanning and scanning electron microscopy. After multispecies biofilms had been grown on the composite resin surfaces, the adhesion of Streptococcus mutans, Streptococcus sobrinus, Porphyromonas gingivalis, Aggregatibacter actinomycetemcomitans, and of total bacteria was determined after 1 (T1) and 4 (T2) days. Differences in surface roughness among the 4 groups were tested with 1-way ANOVA. Multifactorial analysis of variance was used to determine the time-related differences in the bacterial composition with respect to surface roughness (α=.05). RESULTS: The order of SR, from highest to lowest, was SR180 (1.45 ±0.11 µm), SR400 (0.62 ±0.05 µm), SR1500 (0.35 ±0.02 µm), and SRGlass (0.15 ±0.01 µm) (SR180>SR400>SR1500>SRGlass, P<.001). Increased surface roughness was not proportional to bacterial adhesion. Significant differences in the adhesion of total bacteria was only found between SRGlass and SR180 (SR180>SRGlass, P=.029). The adhesion of S. mutans and S. sobrinus to SR180 and SR400 was higher than that to SRGlass (SR180=SR400>SRGlass; S. mutans, P=.003; S. sobrinus, P=.002). However, the adhesion of A. actinomycetemcomitans and P. gingivalis to composite resin was not significantly influenced by surface roughness. Adhesion of total bacteria, S. mutans, and S. sobrinus increased from T1 to T2 (T1T2; A. actinomycetemcomitans, P<.001; P. gingivalis, P=.013). CONCLUSIONS: Decreased adhesion of cariogenic streptococci and total bacteria was observed at surface roughness values of around 0.15 µm. Periodic finishing of surface roughness should be considered to minimize the adhesion of cariogenic streptococci to composite resin surfaces.

Ethnic differences in craniofacial and upper spine morphology between European and Asian children with skeletal Class III malocclusion.

INTRODUCTION: The aims of this study were to analyze differences in craniofacial and upper cervical spine morphology, including posterior cranial fossa and growth prediction signs between European and Asian skeletal Class III children, and to analyze associations between morphologic deviations in the upper cervical spine and craniofacial characteristics. METHODS: A total of 60 skeletal Class III children, 19 Danes and 41 Koreans, were included. Upper spine morphology, Atlas dimensions, and craniofacial morphology, including posterior cranial fossa and growth prediction signs, were assessed on lateral cephalograms. Differences and associations were analyzed by multiple linear and logistic regression analyses adjusted for age and gender. RESULTS: In the craniofacial morphology, the inclination of the maxilla (NSL/NL, P <0.05) and the shape of the posterior cranial fossa (s-d, d-p, p-iop; P <0.01 and P <0.0001, respectively) were significantly different between the 2 groups. There was no significant difference in upper cervical spine morphology and Atlas dimensions between the groups. Fusion was significantly associated with the sagittal jaw relationship (P <0.05), and the total upper spine deviations were significantly associated with some growth prediction signs (P <0.05, P <0.01). Atlas dimensions were significantly associated with the prognathia of the mandible (P <0.05), posterior cranial fossa (P <0.01, P <0.0001), and some growth prediction signs (P <0.05, P <0.01). CONCLUSIONS: Upper spine morphology and Atlas dimensions may provide valuable information for predicting jaw growth and craniofacial morphology in Class III malocclusion.

Antimicrobial Mechanism of Oleanolic and Ursolic Acids on Streptococcus mutans UA159.

Triterpenoid saponin derivatives oleanolic acid (OA) and ursolic acid (UA), but not betulinic acid (BA), were previously found to have strong antimicrobial activity against Streptococcus mutans. OA and UA inhibited the transcription of genes related to peptidoglycan biosynthesis, thereby preventing bacterial growth. However, it is not clear whether this is the only pathway involved in the antimicrobial activity of these compounds against S. mutans. Therefore, we used quantitative real-time PCR (qPCR) and microarray analyses to examine the expression of genes related to essential metabolic pathways in S. mutans UA159 following incubation with OA, UA, or BA. An oligonucleotide array consisting of 5363 probes was designed to survey 1928 of the 1963 genes in the genome of S. mutans UA159. Genes that showed >2-fold changes in expression in response to the treatment conditions were annotated, and selected target genes involved in central metabolism were analyzed by qPCR. Microarray analysis confirmed that the gene expression patterns of the OA- and UA-treated cells differed from that of the BA-treated culture, indicating differences in the antimicrobial mechanism. In particular, the expression of pfk and pykF, coding for glycolysis regulatory proteins phosphofructokinase and pyruvate kinase, respectively, were significantly decreased in the OA and UA groups (P < 0.05), as were genes involved in fatty acid and amino acid synthesis. In addition, the microarray analysis confirmed previous qPCR results showing that peptidoglycan synthesis is down-regulated in the OA- and UA-treated groups. OA and UA also appear to decrease the generation of organic acids by S. mutans UA159, which would have an anticaries effect. Overall, these findings suggest that OA and UA affect multiple genes involved in the central metabolism of S. mutans, with inhibition of glycolysis, fatty acid synthesis, amino acid synthesis, and peptidoglycan synthesis, all contributing to their antimicrobial activity.

Compositional differences in multi-species biofilms formed on various orthodontic adhesives.

OBJECTIVES: To investigate the aspects of multi-species biofilm formation on various orthodontic adhesives with different surface characteristics. METHODS: Multi-species biofilms using 13 bacterial species were grown on the surfaces of composite, compomer, and resin-modified glass-ionomer cement (RMGI). The changes in Streptococcus mutans (Sm), Streptococcus sobrinus (Ss), Porphyromonas gingivalis (Pg), Aggregatibacter actinomycetemcomitans (Aa), and total bacteria were determined at day 1 (T1) and day 4 (T2) using real-time polymerase chain reaction. Surface roughness (SR), surface free energy (SFE), and surface texture were analyzed to explain the differences in bacterial compositions among the adhesives. Repeated measures analysis of variance was used to determine time-related changes in bacterial compositions with respect to adhesive type. The Kruskal-Wallis test was used to determine differences in SR and SFE among the adhesives. RESULTS: There were no significant differences in the adhesion of total bacteria among the adhesives; however, the adhesion of Sm, Ss, and Pg was higher to RMGI than the other adhesives. The amount of Sm, Ss, and total bacteria increased from T1 to T2, while Pg and Aa decreased from T1 to T2. RMGI showed a rougher surface relative to composite or compomer due to the presence of micro-pores and/or flaws. Compomer had the greatest SFE followed by RMGI and composite. Interestingly, SR differences were about 10 times greater than SFE differences among the adhesives. CONCLUSIONS: Considering the greater differences in SR than SFE among the adhesives, the rougher surface of RMGI may cause greater adhesion of Sm, Ss, and Pg.

Adhesion of periodontal pathogens to self-ligating orthodontic brackets: An in-vivo prospective study.

INTRODUCTION: Our aims were to analyze adhesion of periodontopathogens to self-ligating brackets (Clarity-SL [CSL], Clippy-C [CC] and Damon Q [DQ]) and to identify the relationships between bacterial adhesion and oral hygiene indexes. METHODS: Central incisor brackets from the maxilla and mandible were collected from 60 patients at debonding after the plaque and gingival indexes were measured. Adhesions of Aggregatibacter actinomycetemcomitans (Aa), Porphyromonas gingivalis (Pg), Prevotella intermedia (Pi), Fusobacterium nucleatum (Fn), and Tannerella forsythia (Tf) were quantitatively determined using real-time polymerase chain reactions. Factorial analysis of variance was used to analyze bacterial adhesion in relation to bracket type and jaw position. Correlation coefficients were calculated to determine the relationships between bacterial adhesion and the oral hygiene indexes. RESULTS: Total bacteria showed greater adhesion to CSL than to DQ brackets, whereas Aa, Pg, and Pi adhered more to DQ than to CSL brackets. CC brackets showed an intermediate adhesion pattern between CSL and DQ brackets, but it did not differ significantly from either bracket type. Adhesion of Fn and Tf did not differ significantly among the 3 brackets. Most bacteria were detected in greater quantities in the mandibular than in the maxillary brackets. The plaque and gingival indexes were not strongly correlated with bacterial adhesion to the brackets. CONCLUSIONS: Because Aa, Pg, and Pi adhered more to the DQ brackets in the mandibular area, orthodontic patients with periodontal problems should be carefully monitored in the mandibular incisors where the distance between the bracket and the gingiva is small, especially when DQ brackets are used.

In vitro antimicrobial activities of 1-methoxyficifolinol, licorisoflavan A, and 6,8-diprenylgenistein against Streptococcus mutans.

The objective of the study was to investigate the antimicrobial effects of purified single compounds from ethanol-extracted licorice root on Streptococcus mutans. The crude licorice root extract (CLE) was obtained from Glycyrrhiza uralensis, which was subjected to column chromatography to separate compounds. Purified compounds were identified by mass spectrometry and nuclear magnetic resonance. Antimicrobial activities of purified compounds from CLE were evaluated by determining the minimum inhibitory concentration and by performing time-kill kinetics. The inhibitory effects of the compounds on biofilm development were evaluated using crystal violet assay and confocal microscopy. Cell toxicity of substances to normal human gingival fibroblast (NHGF) cells was tested using a methyl thiazolyl tetrazolium assay. Chlorhexidine digluconate (CHX) was used in the control group. Three antimicrobial flavonoids, 1-methoxyficifolinol, licorisoflavan A, and 6,8-diprenylgenistein, were isolated from the CLE. We found that the three flavonoids and CHX had bactericidal effects on S. mutans UA159 at the concentration of ≥4 and ≥1 µg/ml, respectively. The purified compounds completely inhibited biofilm development of S. mutans UA159 at concentrations over 4 µg/ml, which was equivalent to 2 µg/ml of CHX. Confocal analysis showed that biofilms were sparsely scattered in the presence of over 4 µg/ml of the purified compounds. However, the three compounds purified from CLE showed less cytotoxic effects on NHGF cells than CHX at these biofilm-inhibitory concentrations. Our results suggest that purified flavonoids from CLE can be useful in developing oral hygiene products, such as gargling solutions and dentifrices for preventing dental caries.

Influence of temporomandibular joint disc displacement on craniocervical posture and hyoid bone position.

INTRODUCTION: The purpose of this study was to evaluate craniocervical posture and hyoid bone position in orthodontic patients with temporomandibular joint (TMJ) disc displacement. METHODS: The subjects consisted of 170 female orthodontic patients who consented to bilateral magnetic resonance imaging of their TMJs. They were divided into 3 groups based on the results of magnetic resonance imaging of their TMJs: bilateral normal disc position, bilateral disc displacement with reduction, and bilateral disc displacement without reduction. Twenty-five variables from lateral cephalograms were analyzed with 1-way analysis of variance to investigate differences in craniocervical posture and hyoid bone position with respect to TMJ disc displacement status. Pearson correlation coefficients were calculated to analyze the relationships between craniofacial morphology and craniocervical posture or hyoid bone position. RESULTS: Subjects with TMJ disc displacement were more likely to have an extended craniocervical posture with Class II hyperdivergent patterns. The most significant differences were found between patients with bilateral normal disc position and bilateral disc displacement without reduction. However, hyoid bone position in relation to craniofacial references was not significantly different among the TMJ disc displacement groups, except for variables related to the mandible. Pearson correlation coefficients indicated that extended craniocervical posture was significantly correlated with backward positioning and clockwise rotation of the mandible. CONCLUSIONS: This suggests that craniocervical posture is significantly influenced by TMJ disc displacement, which may be associated with hyperdivergent skeletal patterns with a retrognathic mandible.

Adhesion of mutans streptococci to self-ligating ceramic brackets: in vivo quantitative analysis with real-time polymerase chain reaction.

OBJECTIVE: To analyze in vivo mutans streptococci (MS) adhesion to self-ligating ceramic brackets [Clarity-SL (CSL) and Clippy-C (CC)] and the relationships between bacterial adhesion and oral hygiene indices. MATERIALS AND METHODS: Four central incisor brackets from the maxilla and mandible were collected from 40 patients (20 patients per each bracket type) at debonding immediately after plaque and gingival indices were measured. Adhesions of Streptococcus mutans, S. sobrinus, and total bacteria were quantitatively determined using real-time polymerase chain reaction after genomic DNA was extracted. Factorial analysis of variance was used to analyze bacterial adhesion to the brackets with respect to the bracket type and jaw position. Correlation coefficients were calculated to determine the relationships of bacterial adhesion to oral hygiene indices. RESULTS: Adhesion of total bacteria and S. mutans to CSL was higher than that to CC (P < 0.001). Adhesion of total bacteria to the mandibular brackets was higher than that to the maxillary ones (P < 0.001), while adhesion of S. mutans to the maxillary brackets were higher than that in the mandibular ones (P < 0.001). In particular, the proportion of S. mutans to total bacteria in CSL was higher than CC (P < 0.05) in the maxillary anterior teeth (P < 0.001). There were no significant differences in adhesion of S. sobrinus between the brackets and jaw positions. Interestingly, no significant relationships were found between bacterial adhesions and oral hygiene indices. LIMITATIONS: Complex bracket configurations may significantly influence bacterial adhesion to orthodontic brackets. Further in vivo study using bracket raw materials will help to define the relationships between bacteria adhesion and enamel demineralization. CONCLUSIONS: Because oral hygiene indices were not significantly correlated with adhesions of MS to self-ligating ceramic brackets, careful examinations around the brackets should be needed to prevent enamel demineralization, regardless of oral hygiene status.

The effects of TMJ symptoms on skeletal morphology in orthodontic patients with TMJ disc displacement.

OBJECTIVE: The aim of this study was to investigate the effects of temporomandibular joint (TMJ) symptoms on skeletal morphologies of orthodontic patients with TMJ disc displacement (DD). MATERIALS AND METHODS: The sample consisted of 197 women seeking orthodontic treatment. The subjects were divided into two groups according to the presence of TMJ symptoms: the presence and absence of TMJ symptoms. Each group was sub-divided into three groups based on magnetic resonance images of bilateral TMJs: bilateral normal disc position (BN), bilateral disc displacement with reduction (DDR) and bilateral disc displacement without reduction (DDNR). Seventeen variables from lateral cephalograms were analyzed by two-way analysis of variance to identify differences in skeletal morphologies with respect to TMJ symptoms and TMJ DD status. RESULTS: Patients with TMJ DD were more likely to have short ramus height, short mandibular body length and backward positioning of the ramus and mandible. These skeletal morphologies became more severe as TMJ DD progressed to DDNR. However, the skeletal morphologies associated with TMJ DD were not significantly different between symptomatic and asymptomatic patients. As a result, patients with TMJ DD had backward positioning and clockwise rotation compared to those with bilateral normal TMJs, irrespective of the presence of TMJ symptom. CONCLUSIONS: This study suggests that TMJ DD is associated with altered skeletal morphology, but TMJ symptoms do not significantly influence the relationships between TMJ DD and skeletal morphology.

Quantitative analysis of changes in salivary mutans streptococci after orthodontic treatment.

INTRODUCTION: The purpose of this study was to analyze the initial changes in salivary mutans streptococci levels after orthodontic treatment with fixed appliances. METHODS: Our subjects consisted of 58 adults. Whole saliva and simplified oral hygiene index values were obtained at 4 time points: at debonding (T1), 1 week after debonding (T2), 5 weeks after debonding (T3), and 13 weeks after debonding (T4). Repeated measures analysis of variance was used to determine the time-related differences in salivary bacterial levels and the simplified oral hygiene index values among the 4 time points after quantifying the salivary levels of Streptococcus mutans, Streptococcus sobrinus, and total bacteria with real-time polymerase chain reaction. RESULTS: Simplified oral hygiene index values and total bacteria significantly decreased, but salivary mutans streptococci levels significantly increased after orthodontic treatment. The amounts of total bacteria in saliva significantly decreased at T3 (T1, T2 > T3, T4), and the simplified oral hygiene index values decreased at T2 (T1 > T2, T3, T4). However, salivary S mutans and S sobrinus significantly increased at T3 and T4, respectively (T1, T2 < T3 < T4). Furthermore, the proportion of mutans streptococci to total bacteria significantly increased at T4 (T1, T2, T3 < T4). CONCLUSIONS: This study suggests that careful hygienic procedures are needed to reduce the risk for dental caries after orthodontic treatment, despite overall improved oral hygiene status.

Position of the mental foramen on panoramic radiographs and its relation to the horizontal course of the mandibular canal: a computed tomographic analysis.

AIM: The purposes of this study were (1) to investigate the bucco-lingual course of the mandibular canal in the bony structure and (2) to figure out the relationship between the position of mental foramen on panoramic radiographs and the horizontal course of the mandibular canal. MATERIALS AND METHODS: A database of panoramic radiography and spiral computed tomography (CT) scans was searched and 100 subjects were selected based on the criteria. Mental foramina were classified into four groups according to its antero-posterior position. Three measurements were made on each slice of coronal CT scans at three different points: (1) apex of second premolar; (2) median point of two root apexes of first molar; and (3) median point of two root apexes of second molar. The bucco-lingual ratios were calculated to access the relative bucco-lingual position of the mandibular canal. RESULTS: The distribution of subjects according to the type of mental foramen was: (1) type 3, 67%; (2) type 2, 26%; (3) type 4, 5%; and (4) type 1, 2%. The overall horizontal course of the mandibular canal was relatively constant from the second molar to first molar, whereas much significant directional change was found on the remaining course. Between types 2 and 3, no statistically significant differences were found at the level of the second molar and first molar (P = 0.461 and 0.965, respectively). Only below the second premolar, significant differences were found (P = 0.001). CONCLUSIONS: Based on the findings of our computed tomographic image analysis, the position of mental foramen on panoramic radiographs was affected by its horizontal course of inferior alveolar nerve. The significant horizontal direction change of the course was found after the canal passing below the mandibular first molar regardless of the antero-posterior position of mental foramen.

Chlorhexidine release from orthodontic adhesives after topical chlorhexidine treatment.

This study was designed to investigate the ability of orthodontic adhesives to adsorb and release chlorhexidine (CHX) after periodic treatment with 1% CHX solution. Composite and resin-modified glass-ionomer cement (RM-GIC) adhesive disks were incubated with whole saliva or distilled water for 2 h. Release of CHX was measured using high-performance liquid chromatography after 1, 2, and 5 d of incubation, 1 min after exposure to 1% CHX solution. The CHX measurements were performed in a 5-d cycle, which was repeated four consecutive times (n = 7). The amount of CHX adsorbed and the cumulative amounts of CHX released, with respect to type of adhesive and saliva-coating, were analyzed using repeated-measures anova. Chlorhexidine-adsorbed orthodontic adhesives demonstrated a short-term release of CHX, which rapidly returned to near-baseline levels within 3 d. Saliva-coating did not significantly influence CHX release from RM-GIC, but increased the amount of CHX released from the composite. The amount of CHX released from the composite was 20-fold higher than that released from the RM-GIC after saliva-coating. The composite adhesive showed a greater adsorption capacity for CHX than did the RM-GIC, which was more evident after saliva-coating. This study suggests that composite adhesives may be a significantly more effective CHX reservoir than RM-GICs in the oral cavity filled with saliva.

Gender differences in dentofacial characteristics of adult patients with temporomandibular disc displacement.

PURPOSE: The purpose of this study was to assess gender differences in dentofacial characteristics of adult patients according to temporomandibular joint (TMJ) disc displacement (DD) status. MATERIALS AND METHODS: The sample consisted of 293 adult patients (80 male and 213 female). Male and female patients were divided into 3 groups based on magnetic resonance images of bilateral TMJs: bilateral normal disc position (BN), bilateral DD with reduction (DDR), and bilateral DD without reduction (DDNR). Seventeen variables from lateral cephalograms were analyzed by 2-way analysis of variance to identify differences in dentofacial morphologies with respect to gender and TMJ DD status. RESULTS: Patients with TMJ DD had short ramus height, short mandibular body length, and backward positioning of the ramus and mandible. These dentofacial characteristics became more severe as TMJ DD progressed to DDNR. In addition, dentofacial characteristics associated with TMJ DD were not significantly different between men and women except for effective mandibular length (Articulare to pogonion). Effective mandibular length even tended to decrease as TMJ DD progressed, but male patients showed a larger difference in effective mandibular length between BN and DDR than female patients. CONCLUSIONS: This study's findings suggest that dentofacial morphology is strongly associated with TMJ DD status and that skeletal Class II hyperdivergent pattern with a short ramus and mandible may be a potential indicator of TMJ DD regardless of gender.