Dynamic cervical plates: biomechanical evaluation of load sharing and stiffness.

STUDY DESIGN: An in vitro biomechanical study using a simulated cervical corpectomy model to compare the load-sharing properties and stiffnesses of two static and two dynamic cervical plates. OBJECTIVES: To evaluate the load-sharing properties of the instrumentation with a full-length graft and with 10% graft subsidence and to measure the stiffness of the instrumentation systems about the axes of flexion-extension, lateral bending, and axial torsion under these same conditions. SUMMARY OF BACKGROUND DATA: No published reports comparing conventional and dynamic cervical plates exist. METHODS: Six specimens of each of the four plate types were mounted on ultra-high molecular weight polyethylene-simulated vertebral bodies. A custom four-axis spine simulator applied pure flexion-extension, lateral bending, and axial torsion moments under a constant 50 N axial compressive load. Load sharing was calculated through a range of applied axial loads up to 120 N. The stiffness of each construct was calculated in response to +/-2.5 Nm moments about each axis of rotation with a full-length graft, a 10% shortened graft, and no graft. ANOVA and Fisher's post hoc test were used to determine statistical significance (alpha < or = 0.05). RESULTS: The two locked cervical plates (CSLP and Orion) and the ABC dynamic plate were similar in flexion-extension, lateral bending, and torsional stiffness. The DOC dynamic plate was consistently less stiff. The Orion plate load shared significantly less than the other three plates with a full graft. Both the ABC and the DOC plates were able to load share with a shortened graft, whereas the conventional plates were not. CONCLUSIONS: All plates tested effectively load share with a full-length graft, whereas the two dynamic cervical plates tested load share more effectively than the locked plates with simulated graft subsidence. The effect of dynamization on stiffness is dependent on plate design.

Anterior thoracolumbar instrumentation: stiffness and load sharing characteristics of plate and rod systems.

STUDY DESIGN: An in vitro biomechanical study using a thoracolumbar corpectomy model to compare load sharing capabilities and stiffnesses of six different anterior instrumentation systems (three rod styles and three plate styles) for stabilizing the thoracic and lumbar spine. OBJECTIVES: To evaluate the axial load sharing capabilities of the instrumentation in a thoracolumbar corpectomy model and to measure the bending stiffness of the anterior instrumentation systems for the axes of flexion-extension, lateral bending, and axial rotation with and without an anterior column graft in place. SUMMARY OF BACKGROUND DATA: Prior publications have analyzed biomechanical characteristics of many spinal instrumentation systems. These reports have compared anterior instrumentation systems with posterior instrumentation systems, in situ fusion techniques, intervertebral spacers, structural allograft and instrumentation, and combined anterior and posterior instrumentation. Other reports have published data on the biomechanical characteristics of typical anterior and posterior spinal instrumentation systems. However, there are no published reports that specifically compare the characteristics of anterior plate-style with anterior rod-style systems, or examining load sharing capabilities. METHODS: Six constructs of each of six instrumentation systems were mounted on simulated vertebral bodies. A custom four-axis spine simulator was used to apply independent flexion-extension, lateral bending, and axial rotation moments as well as axial compressive loads. Axial load sharing was measured through a range of applied axial loads from 50 N to 500 N with rotational moments maintained at 0 Nm. The bending stiffness of each construct was calculated in response to +/-5.0 Nm moments about each axis of rotation with a 50 N compressive axial load with a full-length corpectomy graft in place, simulating reconstruction of the anterior column, and with no graft in place, simulating catastrophic graft failure. Statistical significance was determined using an analysis of variance and Fisher PLSD post hoc test with an alpha