Environmental challenges of COVID-19 pandemic: resilience and sustainability - A review.

The emergence of novel respiratory disease (COVID-19) caused by SARS-CoV-2 has become a public health emergency worldwide and perturbed the global economy and ecosystem services. Many studies have reported the presence of SARS-CoV-2 in different environmental compartments, its transmission via environmental routes, and potential environmental challenges posed by the COVID-19 pandemic. None of these studies have comprehensively reviewed the bidirectional relationship between the COVID-19 pandemic and the environment. For the first time, we explored the relationship between the environment and the SARS-CoV-2 virus/COVID-19 and how they affect each other. Supporting evidence presented here clearly demonstrates the presence of SARS-CoV-2 in soil and water, denoting the role of the environment in the COVID-19 transmission process. However, most studies fail to determine if the viral genomes they have discovered are infectious, which could be affected by the environmental factors in which they are found.The potential environmental impact of the pandemic, including water pollution, chemical contamination, increased generation of non-biodegradable waste, and single-use plastics have received the most attention. For the most part, efficient measures have been used to address the current environmental challenges from COVID-19, including using environmentally friendly disinfection technologies and employing measures to reduce the production of plastic wastes, such as the reuse and recycling of plastics. Developing sustainable solutions to counter the environmental challenges posed by the COVID-19 pandemic should be included in national preparedness strategies. In conclusion, combating the pandemic and accomplishing public health goals should be balanced with environmentally sustainable measures, as the two are closely intertwined.

A state-of-the-art review on cadmium uptake, toxicity, and tolerance in rice: From physiological response to remediation process.

Cadmium (Cd), a major contaminant of concern, has been extensively reviewed and debated for its anthropogenic global shifts. Cadmium levels in rice grains raise wide food safety concerns. The aim of this review is therefore to capture the dynamics of Cd in paddy soil, translocation pathways of Cd from soil to consumption rice, and assess its bio-accessibility in human consumption. In crop plants, Cd reduces absorption of nutrients and water, triggers oxidative stress, and inhibits plant metabolism. Understanding the mechanisms and behaviour of Cd in paddy soil and rice allows to explain, predict and intervene in Cd transferability from soil to grains and human exposure. Factors affecting Cd movement in soil, and further to rice grain, are elucidated. Recently, physiological and molecular understanding of Cd transport in rice plants have been advanced. Morphological-biochemical characteristics and Cd transporters of plants in such a movement were also highlighted. Ecologically viable remediation approaches, including low input cost agronomic methods, phytoremediation and microbial bioremediation methods, are emerging.

A finite element study and mathematical modeling of lumbar pedicle screw along with various design parameters.

BACKGROUND: Lumbar pedicle screw is one of the most common and important elements in the field of lumbar surgery. It plays a great role in rectifying the spinal alignment and stabilization providing strength and stability to the affected area of spine. In spinal surgery, minimally invasive techniques and minor incisions are made which makes it less painful for the patients than the traditional methods. Moreover, the screws are not needed to be removed after the surgery which is yet another great advantage of the pedicle screw. METHOD: In this study, 3D Finite Element (FE) model of human L4 vertebrae is taken for analysis using image processing tool. Pedicle screw design with varying mechanical and geometrical properties has been carried out at different applied loads on it along with considering the effect of frictional forces between all contact surfaces. RESULT: Mathematical relationship among stress, strain, pitch of the screw and diameter have been developed for different thread profiles which will be beneficial for researchers for further development of pedicle screw implants. CONCLUSION: Results from the different analysis shows that bending stress on the screw for different loads at triangular pitch is higher than the trapezoidal. Hence, trapezoidal thread is efficacious than triangular thread. In case of vertebral bone, the magnitude of stress is less for trapezoidal screw than triangular and stress has a linear relationship with pitch length. In term of strain, triangular thread develops more strain than trapezoidal thread. A set of mathematical relation has been developed for different thread profile based on pitch length, stress and strain which gives the idea about von Mises stress and strain.

Sedimentation of metals in Sundarban mangrove ecosystem: Dominant drivers and environmental risks.

Metal contamination from upstream river water is a threat to coastal and estuarine ecosystem. The present study was undertaken to unveil sedimentation processes and patterns of heavy metal deposition along the salinity gradient of a tropical estuary and its mangrove ecosystem. Sediment columns from three representative sites of differential salinity, anthropogenic interference, and sediment deposition pattern were sampled and analyzed for grain size distribution and metal concentrations as a function of depth. Sediments were dominantly of silty-medium sand texture. A suite of fluvial and alluvial processes, and marine depositional forcing control the sediment deposition and associated heavy metal loading in this estuary. The depth profile revealed a gradual increase in heavy metal accumulation in recent top layer sediments and smaller fractions (silt + clay), irrespective of tidal regimes. Alluvial processes and long tidal retention favor accumulation of heavy metals. Enrichment factor (0.52-15), geo-accumulation index (1.4-5.8), and average pollution load index (PLI = 2.0) indicated moderate to higher heavy metal contamination status of this estuary. This study showed that alluvial processes acted as dominant drivers for the accumulation of metals in sediments, which prevailed over the influence of marine processes. Longer tidal retention of the water column favored more accumulation of heavy metals. Metal accumulation in the sediments entails a potential risk of bioaccumulation and biomagnification through the food web, and may increasingly impact estuarine ecology, economy, and ultimately human health.

Fish parasites as proxy bioindicators of degraded water quality of River Saraswati, India.

The nature and intensity of water pollution determine the effects on aquatic biota and aquatic ecosystem health. The present study aimed at assessing the impact of the degraded physicochemical regime of river Saraswati, a polluted river having a historical legacy, on the parasitic infection and the role of fish parasite as a bioindicator of water quality. Two Water Quality Indices (WQIs) were adopted as useful tools for assessing the overall water quality status of polluted river based on 10 physicochemical parameters. Total 394 fish (Channa punctata) were examined. Ectoparasite Trichodina sp., Gyrodactylus sp., and endoparasites Eustrongylides sp. were collected from the host fish. Prevalence, mean intensity and abundance for each sampling period were calculated for the determination of parasitic load. The parasitic load of Trichodina sp. and Gyrodactylus sp. was significantly (p < 0.001) higher in winter, whereas the parasitic load of Eustrongylides sp. showed no significant (p > 0.05) seasonal fluctuation. The parasitic load of ectoparasites was negatively correlated with temperature, free carbon dioxide, biochemical oxygen demand, and WAWQI but positively correlated with electrical conductivity and CCMEWQI. Fish health was found to be adversely affected by degrading water qualities and parasitic infection. A 'vicious cycle' develops as a result of the interplay among deteriorating water quality, withering fish immunological defence, and amplifying parasitic infection. Since parasitic load was strongly conditioned by the combined influence of a suite of water quality parameters the fish parasites can be used as a powerful indicator of deteriorating water quality.

Nitrogen dioxide as proxy indicator of air pollution from fossil fuel burning in New Delhi during lockdown phases of COVID-19 pandemic period: impact on weather as revealed by Sentinel-5 precursor (5p) spectrometer sensor.

There has been a long-lasting impact of the lockdown imposed due to COVID-19 on several fronts. One such front is climate which has seen several implications. The consequences of climate change owing to this lockdown need to be explored taking into consideration various climatic indicators. Further impact on a local and global level would help the policymakers in drafting effective rules for handling challenges of climate change. For in-depth understanding, a temporal study is being conducted in a phased manner in the New Delhi region taking NO2 concentration and utilizing statistical methods to elaborate the quality of air during the lockdown and compared with a pre-lockdown period. In situ mean values of the NO2 concentration were taken for four different dates, viz. 4th February, 4th March, 4th April, and 25th April 2020. These concentrations were then compared with the Sentinel (5p) data across 36 locations in New Delhi which are found to be promising. The results indicated that the air quality has been improved maximum in Eastern Delhi and the NO2 concentrations were reduced by one-fourth than the pre-lockdown period, and thus, reduced activities due to lockdown have had a significant impact. The result also indicates the preciseness of Sentinel (5p) for NO2 concentrations.

Bioremediation of metal(loid) cocktail, struvite biosynthesis and plant growth promotion by a versatile bacterial strain Serratia sp. KUJM3: Exploiting environmental co-benefits.

In this study the multiple metal(loid) (As, Cd, Cu and Ni) resistant bacterium Serratia sp. KUJM3 was able to grow in both single and multiple metal(loid) contaminated wastewater and removed them by 34.93-48.80% and 22.93-32%, respectively. It reduced As(v) to As(III) by 68.44-85.06% in a concentration dependent manner. The strain's IAA production potential increased significantly under both metal(loid)s regime. The lentil (Lens culinaris) seed germination and seed production were enhanced with the exogenous bacterial inoculation by 20.39 and 16.43%, respectively. Under both multi-metal(loid) regimes the bacterial inoculation promoted shoot length (22.65-51.34%), shoot dry weight (33.89-66.11%) and seed production (13.46-35%). Under bacterial manipulation the metal(loid)s immobilization increased with concomitant curtailment of translocation in lentil plant by 61.89-75.14% and 59.19-71.14% in shoot and seed, respectively. The strain biomineralized struvite (MgNH4 PO4 ·6H2O) from human urine @ 403 ± 6.24 mg L-1. The fertilizer potential of struvite was confirmed with the promotion of cowpea (Vigna unguiculata) growth traits e.g. leaf number (37.04%), pod number (234%), plant wet weight (65.47%) and seed number (134.52%). Thus Serratia sp. KUJM3 offers multiple benefits of metal(loid)s bioremediation, As(V) reduction, plant growth promotion, and struvite biomineralization garnering a suite of appealing environmental applications.

Challenges and opportunities in sustainable management of microplastics and nanoplastics in the environment.

The accumulation of microplastics (MPs) and nanoplastics (NPs) in terrestrial and aquatic ecosystems has raised concerns because of their adverse effects on ecosystem functions and human health. Plastic waste management has become a universal problem in recent years. Hence, sustainable plastic waste management techniques are vital for achieving the United Nations Sustainable Development Goals. Although many reviews have focused on the occurrence and impact of micro- and nanoplastics (MNPs), there has been limited focus on the management of MNPs. This review first summarizes the ecotoxicological impacts of plastic waste sources and issues related to the sustainable management of MNPs in the environment. This paper then critically evaluates possible approaches for incorporating plastics into the circular economy in order to cope with the problem of plastics. Pollution associated with MNPs can be tackled through source reduction, incorporation of plastics into the circular economy, and suitable waste management. Appropriate infrastructure development, waste valorization, and economically sound plastic waste management techniques and viable alternatives are essential for reducing MNPs in the environment. Policymakers must pay more attention to this critical issue and implement appropriate environmental regulations to achieve environmental sustainability.

Soil organic carbon dynamics in the agricultural soils of Bangladesh following more than 20 years of land use intensification.

Soil organic carbon (SOC) is a key soil quality indicator, as it is a source and storage of plant nutrients and plays a vital role in soil fertility and productivity maintenance. Intensification of agriculture is known to cause SOC decline; however, much of the evidence stems from field-scale experimental trials. The primary aim of this study is to investigate how more than 20 years of agricultural land use intensification in Bangladesh has influenced SOC levels at landscape levels. This was achieved by revisiting in 2012 four sub-sites from the Brahmaputra and Ganges alluviums which were previously sampled (1989-92) by the Soil Resource Development Institute and collecting 190 new samples. These were located at different elevations and subjected to differing amounts of inundation. The SOC was determined using the same method, potassium dichromate wet oxidation, used in the 1989-92 campaign. A comparison of the SOC in the 2012 samples with their historic levels (1989-92) revealed that overall SOC declined significantly across both alluviums as well at their four sub-sites. Further analysis, however, showed that SOC has declined more at higher sites. The higher sites are inundated to a limited level, which makes them suitable for growing multiple crops. Among the land types considered here, the low land sites (because of their topographical position) remain inundated for a greater part of the year, allowing a maximum of only one crop of submerged rice. As a result of reduced biomass decomposition due to anaerobic conditions when inundated, and lower land use/cropping intensity, SOC accretion has occurred in the lower land sites. The SOC levels in South Asian countries are inherently low and agricultural land use intensification fuelled by growing food production demand is causing further SOC loss, which has the potential to jeopardise food security and increase the environmental impact of agriculture.

Characterization, Behavior, and Risk Assessment of Polycyclic Aromatic Hydrocarbons (PAHs) in the Estuary Sediments.

Polycyclic aromatic hydrocarbons (PAHs) are persistent toxic substances that have ubiquitous presence in water, air, soil, and sediment environments. The growth of PAH toxicities and related ecotoxicology risk in estuary sediment has a serious concern. Present study examined the PAHs concentration, sources, and ecological risk from selected sites in Subarnarekha River estuary (SRE) sediment deposits. The sum of toxic 16 PAHs was ranged from 36.8 to 670.8 ng/g (mean = 223.46 ± 196.35 ng/g). The total PAH concentration varied significantly among the sampling sites (range 511.3 ng/g to 233.8 ng/g) based on allochthonous contaminant loads. Among the 16 compounds, Phen had the highest concentration (40.18 ng/g), followed by Pye (31.86 ng/g), Flur (29.36 ng/g), and NA (19.33 ng/g). Most of the sampling sites contained abundant 3-ring and 4-5-ring PAHs. Based on diagnostic ratios and PCA analysis petroleum combustion, biomass, and coal-burning have been identified as the major sources. The PAHs had high mutagenic equivalent factor and toxic equivalent factor values posing great ecological threats and health risks.

Detection and characterization of refractory organic and inorganic pollutants discharged in biomethanated distillery effluent and their phytotoxicity, cytotoxicity, and genotoxicity assessment using Phaseolus aureus L. and Allium cepa L.

The color effluent discharged by alcohol distilleries comprises very high pollution loads due to the plethora of refractory chemicals even after anaerobic treatment and causing adverse effects to the environment. The present study aimed to examine the phytotoxic, cytotoxic, and genotoxic potential of the identified refractory organic and inorganic pollutants discharged in bio-methanated distillery effluent (BMDE). Physico-chemical analyses revealed that BMDE retains high BOD, COD, TDS along with heavy metals like Fe (572.64 mg L-1), Mn (4.269 mg L-1), Cd (1.631 mg L-1), Zn (2.547 mg L-1), Pb (1.262 mg L-1), (Cr 1.257 mg L-1), and Ni (0.781 mg L-1) beyond the permissible limits for effluent discharge. GC-MS analysis revelaed the presence of hexadecanoic acid, TMS ester; octadecanoic acid, TMS ester; 2,3 bis[(TMS)oxy]propyl ester; stigmasterol TMS ether; ß-sitosterol TMS ester; hexacosanoic acid; and tetradecanoic acid, TMS ester as major refractory organic pollutants, which are listed as potential endocrine disruptor chemicals (EDCs) as per USEPA. Furthermore, phytotoxicity assessment with Phaseolus aureus L. showed the toxic nature of BMDE as it inhibited various seedling growth parameters, seed germination, and suppression of α-amylase activity in seed germination experiment. Moreover, genotoxicity and cytotoxicity evaluation of the discharged BMDE evidenced in root-tip meristematic cells of Allium cepa L. where chromosomal aberration such as disturbed metaphase, c-mitosis, laggard chromosomes, sticky chromosomes, prolonged prophase, polyploid cells, and apoptotic bodies etc. were observed. Thus, this study's results suggested that BMDE discharged without adequate treatment poses potential risk to environment and may cause a variety of serious health threats in living beings upon exposure.

Enteric bacteria from the earthworm (Metaphire posthuma) promote plant growth and remediate toxic trace elements.

This work aimed at elucidating the role of bacteria present in the gut of the earthworm Metaphire posthuma in plant growth promotion and toxic trace elements (TTEs) bioremediation. We isolated and identified three bacterial strains Bacillus safensis (MF 589718), Bacillus flexus (MF 589717) and Staphylococcus haemolyticus (MF 589719) among which the Bacillus strains appeared to be significantly more potent than the Staphylococcus strain (P < 0.05) in promoting plant growth and removing TTE (Cr(VI), Cu(II) and Zn(II)) from aqueous media. These strains exhibited several plant growth promoting traits (e.g., indole acetic acid (IAA), gibberellic acid (GA) and ammonium ion production, 1-aminocyclopropane- 1-carboxylic acid (ACC) deaminase activity, and phosphate solubilizing potential). In a pot trial, the gut isolates improved Vigna radiata seed germination, and enhanced the leaf area (30-79%), total chlorophyll content (26-67%) and overall root-shoot biomass (32-83%) as compared to the control. Bacillus safensis and Bacillus flexus were equipotent in removing Cr(VI) (40.5 and 40.3%) from aqueous media; the former triumphed for Zn(II) removal (52.8%), while the latter performed better for Cu(II) removal (43.5%). The gut isolates successfully solubilized phosphate even in TTE-contaminated conditions. The results demonstrate that the earthworm's enteric bacteria possess inherent plant growth promoting, TTE resistance and phosphate solubilization (even under TTE stress) properties which can be further explored for their application in sustainable crop production and environmental management.

Assessing the potential ecological risk of Co, Cr, Cu, Fe and Zn in the sediments of Hooghly-Matla estuarine system, India.

Hooghly-Matla estuarine system along with the Sundarbans mangroves forms one of the most diverse and vulnerable ecosystems in the world. We have investigated the distribution of Co, Cr, Cu, Fe and Zn along with sediment properties at six locations [Shamshernagar (S1), Kumirmari (S2 and S3), Petuaghat (S4), Tapoban (S5) and Chemaguri (S6)] in the Hooghly estuary and reclaimed islands of the Sundarbans for assessing the degree of contamination and potential ecological risks. Enrichment factor values (0.9-21.6) show enrichment of Co, Cu and Zn in the intertidal sediments considering all sampling locations and depth profiles. Geo-accumulation index values irrespective of sampling locations and depth revealed that Co and Cu are under class II and class III level indicating a moderate contamination of sediments. The pollution load index was higher than unity (1.6-2.1), and Co and Cu were the major contributors to the sediment pollution followed by Zn, Cr and Fe with the minimum values at S1 and the maximum values at S5. The sediments of the Hooghly-Matla estuarine region (S4, S5 and S6) showed considerable ecological risks, when compared with effect range low/effect range median and threshold effect level/probable effect level values. The variation in the distribution of the studied elements may be due to variation in discharge pattern and exposure to industrial effluent and domestic sewage, storm water and agricultural run-off and fluvial dynamics of the region. The study illuminates the necessity for the proper management of vulnerable coastal estuarine ecosystem by stringent pollution control measures along with regular monitoring and checking program.

Sediment quality, elemental bioaccumulation and antimicrobial properties of mangroves of Indian Sundarban.

Mangroves have wide applications in traditional medicines due to their several therapeutic properties. Potentially toxic elements (PTEs), in mangrove habitats, need serious concern because of their toxicity, bioaccumulation capacity and ecotoxicological risks. In the current study, we aimed to examine sediment quality and bioaccumulation of PTEs in a mangrove-dominated habitat of Sundarban, India, and their relation with antimicrobial property of ten mangrove species of the region. Antimicrobial activity of different solvent fractions of mangrove leaves was assessed against seven microorganisms. The highest antimicrobial activity was detected in ethyl acetate and acetone-extracted fractions of Avicennia alba. Various sediment quality indices revealed progressively deteriorating nature of surface sediment having moderate contamination, however, low ecotoxicological risk. The accumulation factors (AF) for different PTEs indicate a gradual metal bioaccumulation in leaf tissue. Antimicrobial activities indicated both positive and negative correlations with manganese (Mn), copper (Cu), iron (Fe) and zinc (Zn) concentrations of mangrove species. Concentration of Mn showed a significant correlation with almost all the fractions, whereas Cu had correlation with ethyl acetate, acetone and methanol fractions (P < 0.05). The AF of Mn and Cu exhibited correlation with antimicrobial activities of acetone and methanol fractions, whereas Fe and Zn had correlation with hexane and ethyl acetate fractions. Overall, Mn, Fe, Cu and Zn concentrations of Acanthus ilicifolius and Avicennia alba leaves and in the surface sediments demonstrated the strongest association (P < 0.05) with their antimicrobial activity as also depicted in correlation and cluster analysis studies. Thus, this study will help to establish a link between the PTEs in mangrove ecosystem with their bioactivity.

A tetrad apparatus for protein gel casting, electrophoresis, staining, and scanning techniques with dual sensors for automatic detection of gel polymerization and protein migration.

Recent advancements in biochemical sciences have facilitated researchers to explore the structure and function of macro molecules in a cell. PAGE is one of the most favored and adapted laboratory techniques. Due to its simple and economical procedures, several variants or new modifications are routinely observed in the basic electrophoresis technique that comprises gel casting, electrophoresis, staining, and imaging process which consequently necessitates additional apparatuses/components in the laboratory. Operation of these additional apparatuses/components lengthens the pre- and postelectrophoresis procedures involving many intermittent tedious and time-consuming steps. A universal apparatus that can facilitate all such associated techniques is lacking and is of utmost importance for fast and effective results. An apparatus that can perform synchronized action of slab gel casting (16 × 16 cm), electrophoresis (SDS-PAGE), dye staining (Coomassie), and imaging (scanning) techniques with real-time monitoring through sensor technology is described in this article. The estimated cost (∼$150) of fabrication of the apparatus is very economical and simple assembly procedure of the main apparatus can be completed within ∼30 min after fabrication.

Exploring potential applications of a novel extracellular polymeric substance synthesizing bacterium (Bacillus licheniformis) isolated from gut contents of earthworm (Metaphire posthuma) in environmental remediation.

The aim was to isolate, characterize, and explore potentials of gut bacteria from the earthworm (Metaphire posthuma) and imply these bacteria for remediation of Cu(II) and Zn(II). An extracellular polymeric substance (EPS) producing gut bacteria (Bacillus licheniformis strain KX657843) was isolated and identified based on 16S rRNA sequencing and phylogenetic analysis. The strain showed maximum tolerance of 8 and 6 mM for Cu(II) and Zn(II) respectively. It removed 34.5% of Cu(II) and 54.4% of Zn(II) at 25 mg L-1 after 72 and 96 h incubation respectively. The bacteria possessed a great potential to produce indole acetic acid (38.49 µg mL-1) at 5 mg mL-1 L-tryptophan following 12 days incubation. The sterilized seeds of mung beans (Vigna radiata) displayed greater germination and growth under bacterium enriched condition. We observed that the bacterial strain phosphate solubilization ability with a maximum of 204.2 mg L-1 in absence of Cu(II) and Zn(II). Endowed with biosurfactant property the bacterium exhibited 24% emulsification index. The bacterium offered significant potential of plant growth promotion, Cu(II) and Zn(II) removal, and as such this study is the first report on EPS producing B. licheniformis KX657843 from earthworm which can be applied as powerful tool in remediation programs of Cu(II) and Zn(II) contaminated sites.

Exposure to heavy metals alters the surface topology of alveolar macrophages and induces respiratory dysfunction among Indian metal arc-welders.

BACKGROUND: Despite the available clinico-epidemiological evidence of heavy metal-associated respiratory health hazards among metal arc-welders, experimental confirmation of such an association is lacking. METHODS: In this study, we recruited 15 metal arc-welders and 10 referent workers without direct exposure. We assessed respiratory health through a questionnaire and spirometry; estimated manganese, nickel and cadmium levels in blood, urine and induced sputum; performed differential counts of sputum leucocytes and measured plasma malondialdehyde (MDA). We used atomic force and scanning electron microscopy to assess the physical property of the alveolar macrophages (AMs) obtained from induced sputum and analysed cell surface deposition of heavy metals using energy dispersion X-ray analysis (EDX). Sputum cellular DNA damage was assessed by DNA-laddering assay. RESULTS: There was a higher body burden of manganese and nickel in the metal arc-welders than the referents. Among major spirometric indices, only the forced mid-expiratory flow rates (FEF25-75) were reduced in the welders compared with the referents (63.4 ± 14.7 vs. 89.2 ± 26.7, p < 0.01); this reduction was associated with both heavy metal levels (ß: -41.8, 95% CI: -78.5% to -5.1%) and plasma MDA (-0.37; -0.68 to -0.06). In metal arc-welders, significant physical and morphological changes were observed in AMs through microscopic evaluation while EDX analyses demonstrated higher deposition of heavy metals on the AM cell surface than the referents. We also observed a higher degree of DNA damage in the sputum cells of the exposed workers than the referents. CONCLUSION: Heavy metal exposure-induced adverse respiratory effects among metal arc-welders are mediated through haematological and cytological interactions.

Effect of two-level pedicle-screw fixation with different rod materials on lumbar spine: A finite element study.

BACKGROUND: Pedicle-screw-rod fixation system is very popular surgical remedy for degenerative disc disease. It is important to observe load vs. spinal motion characteristic for better understanding of clinical problems and treatment of spinal instability associated with low-back pain. OBJECTIVE: The objective of this study is to understand the effect [range of motion (ROM) and intervertebral foramen height] of pedicle-screw fixation with three rod materials on lumbar spine under three physiological loading conditions. METHOD: A three-dimensional finite element (FE) model of lumbar to sacrum (L1-S) vertebrae with pedicle-screw-rod fixation at L3-L5 level is developed. Three rod materials [titanium alloy (Ti6Al4V), ultra-high molecular weight poly ethylene (UHMWPE) and poly-ether-ether-ketone (PEEK)] are used for two-level fixation and the FE models are simulated for axial rotation, lateral bending and flexion-extension under ±10 Nm moment and 500 N compressive load and compared with the intact (natural) model. RESULT & DISCUSSION: For axial rotation, lateral bending and flexion, ROM increased 2.8, 4.5 and 1.83 times respectively for UHMWPE, and 3.7, 7.2 and 2.15 times respectively for PEEK in comparison to Ti6Al4V. As ROM is 49, 29 and 31% of the intact model during axial rotation, lateral bending and flexion respectively, PEEK rod produced better motion flexibility than Ti6Al4V and UHMWPE rod. Foramen height increased insignificantly by 2.21% for the PEEK rod with respect to the intact spine during flexion. For the PEEK rod, maximum stress of 40 MPa during axial rotation is much below the yield stress of 98 MPa. CONCLUSION: Ti6Al4V pedicle-screw-rod fixation system highly restricted the ROM of the spine, which is improved by using UHMWPE and PEEK, having lower stiffness. The foramen height did not vary significantly for any implant materials. In terms of ROM and maximum stress, PEEK rod may be considered for a better implant design to get better ROM and thus mobility.

Correction to: Trace elements in surface sediments of the Hooghly (Ganges) estuary: distribution and contamination risk assessment.

Unfortunately, in the original publication of the article, Prof. Yong Sik Ok's affiliation was incorrectly published. The author's affiliation is as follows.

Multi-gel casting apparatus for vertical polyacrylamide gels with in-built solution flow system and liquid level detectors.

PAGE is the most widely used technique for the separation and biochemical analysis of biomolecules. The ever growing field of proteomics and genomics necessitates the analysis of many proteins and nucleic acid samples to understand further about the structure and function of cells. Simultaneous analysis of multiple protein samples often requires casting of many PAGE gels. Several variants of multi-gel casting/electrophoresis apparatuses are frequently used in research laboratories. Requirement of supplementary gels to match the growing demand for analyzing additional protein samples sometimes become a cause of concern. Available apparatuses are not amenable to and therefore, not recommended for any modification to accommodate additional gel casting units other than what is prescribed by the manufacturer. A novel apparatus is described here for casting multiple PAGE gels comprising four detachable components that provide enhanced practicability and performance of the apparatus. This newly modified apparatus promises to be a reliable source for making multiple gels in less time without hassle. Synchronized functioning of unique components broaden the possibilities of developing inexpensive, safe, and time-saving multi-gel casting apparatus. This apparatus can be easily fabricated and modified to accommodate desired number of gel casting units. The estimated cost (∼$300) for fabrication of the main apparatus is very competitive and effortless assembly procedure can be completed within ∼30 min.