Effect of Disinfection Protocols on Bacterial Reduction in Mandibular Molars.

OBJECTIVE: Evaluate the bacterial reduction effect of disinfection protocols used in lower molars infected by Enterococcus faecalis. METHODS: Eighty extracted lower molars were prepared and inoculated with E. faecalis for 2 months. The teeth were then distributed into 2 control groups (n = 4) and 4 experimental groups (n = 18) in function of the disinfection protocol utilized: G1. WaveOne Gold (WOG), passive ultrasonic irrigation (PUI) and Ultracal; G2. WOG, PUI and calcium hydroxide (CH); G3. WOG, XP-Endo Finisher (XPF) and Ultracal; G4. WOG, XPF and CH. Bacteriological samples were collected previously (S1), after preparation (S2), final agitation (S3) and intracanal dressing (S4). Microbial growth was assessed according to culture turbidity and UV spectrophotometry. Statistical analyses used the Friedman test for paired samples and Kruskal-Wallis test for non-paired data (p<0.05). RESULTS: No protocol eliminated E. faecalis effectively. The S2, S3 and S4 samples were statistically different from the S1 samples in G1, G2, G3 and G4 (p<0.05). Statistical differences were observed in bacterial reduction between G1 and G2 and G1 and G3 after the intracanal medicament (S4) (p<0.05). CONCLUSION: The WOG + PUI + CH disinfection protocol showed higher percentages of bacterial reduction.

Does radiotherapy treatment alter the pulp condition in patients with head and neck cancer? A systematic review.

The main purpose of this study was to answer the question: "Can radiotherapy cause changes in the dental pulp condition of patients treated with irradiation in the head and neck region?" Clinical observational studies in adults with head and neck cancer undergoing treatment with ionizing radiation, longitudinal or cross-sectional follow-up to measure oxygen saturation (SpO2), and/or pulp sensitivity test to cold stimulation, were considered eligible. A systematic literature search was performed in six different databases, including the gray literature, and in article references. Two independent evaluators selected the studies, extracted the data, recorded the data on electronic spreadsheets, and then evaluated the methodological quality using the Checklist for Quasi-Experimental Studies tool devised by JBI. The data were assessed qualitatively using the Synthesis Without Metanalysis (SWiM) guidelines. After removing the duplicate articles, carefully analyzing the titles and abstracts, and reading the papers in full, seven studies were included. Four of the studies evaluated applied the cold sensitivity test, two associated pulse oximetry and cold sensitivity, and only one used just pulse oximetry. Evaluation using the cold sensitivity test and pulse oximetry in the initial periods before radiotherapy showed a decrease in the sensitive response and in SpO2 levels during a maximum period of 1 year. However, analyses thereafter indicated a normal response in both tests from 5 to 6 years after the end of radiotherapy treatment. Radiotherapy causes changes in pulp behavior patterns in the short term; however, recovery and return to average values occurs after long periods.

Does irradiation of the tooth structure interfere with oxygen saturation measured by pulse oximetry?-An ex vivo laboratorial study.

The effect of tooth structure subjected to ionising radiation on oxygen saturation levels (SpO2 ) measured by pulse oximetry was investigated. Fifty-four extracted human third molars were sectioned mesiodistally. Pulse oximeter diodes were placed in prefabricated silicone moulds, secured on a vise with tooth surfaces placed between the diodes and the participant's finger, and SpO2 levels were measured. After that, the tooth surfaces were subjected to ionising radiation in fractionated doses of up to 70 Gy, and SpO2 was measured according to the protocol described. The Kolmogorov-Smirnov test was used for the analysis of normality of the quantitative variables, and Student's t-test compared mean SpO2 levels before and after irradiation. Mean SpO2 after irradiation was 94.6 ± 0.9%, without a statistically significant difference from SpO2 before irradiation, which was 94.7 ± 0.6%. Irradiation of the tooth structure did not interfere with SpO2 levels measured by pulse oximetry.

Evaluation in the danger zone of mandibular molars after root canal preparation using novel CBCT software.

This study measured the thickness of cementum/dentin in the danger zone of the mandibular molars after root canal preparation using novel cone-beam computed tomography (CBCT) software. Eighty-four teeth were distributed into four groups: ProTaper Next, BioRace, Reciproc Blue, and WaveOne Gold. E-Vol DX® CBCT software was used to measure initial and final remaining cementum-dentin thicknesses after root canal preparation of the mesial root of mandibular molars at 1 and 3 mm from the furcation. The Kolmogorov-Smirnov test was used to test variable symmetry. The variables were described as mean and standard deviations, compared among the groups using analysis of variance (ANOVA), and within the groups using the Student t test. A generalized estimating equation model was used to compare the variation before and after root canal preparation. The level of significance was set at 5%. Differences between mean initial and final thicknesses of the mesiobuccal (MB) and mesiolingual (ML) canals were not statistically significant. The mean initial thickness was 3 mm (0.900 mm ± 0.191), considering that a mean lower than 1 mm (1.035 mm ± 0.184) indicates the danger zone. Although cementum/dentin is thinner at 3 mm from the furcation (0.715±0.186) after root canal preparation, the greatest amount of dentin removed was found at 1 mm (0.734 ± 0.191). The cementum-dentin remaining after preparation was thicker than 0.715 mm in root canals prepared using #35 (WaveOne Gold®) and #40 (ProTaper Next®, BioRace® and Reciproc Blue®) instruments. This confirms the safety of canal preparation in the danger zone using these systems.

Late discolouration of root-treated teeth and subsequent restorative retreatment: three case reports.

Root-filled teeth that receive ceramic veneers may experience subsequent coronal discolouration, which will likely negatively affect the quality of life of patients and their relationship with the clinician. This manuscript describes three cases of this undesirable aesthetic consequence in anterior teeth of young patients and the subsequent restorative reintervention, with satisfactory results. In all three reports, the root canal filling was performed using cements containing bismuth oxide that likely disassociated into reduced metallic crystals when in contact with LED light. The discolouration observed after veneer cementation was most likely caused by the accumulation of these bismuth metallic crystals. These cases highlight the importance of preventing this undesirable complication, which may also result in the potential subsequent further sacrifice of sound coronal dental structure, and the role of recall in aesthetically demanding clinical cases.

Cyclic Fatigue and Torsional Strength of a New Thermally Treated Reciprocating System.

OBJECTIVE: This study evaluated the resistance to cyclic fatigue and the torsional strength of Prima One Gold® and WaveOne Gold® reciprocating systems. METHODS: Cyclic fatigue was tested in an artificial canal with 60º curvature, a 5 mm radius of curvature at 22°C (n=10) and 36.5°C (n=10). The torsional strength test followed ISO 3630-1, measuring torque and deflection angle until fracture (n=10). The t-test was used to compare the two groups, and the significance level was set at 5%. RESULTS: The Prima One Gold group presented greater resistance to cyclic fatigue at room temperature (P=0.001) and body temperature (P<0.001). For the torsional resistance test, the Prima One Gold group had a lower maximum torque value (P=0.029), despite having a greater deflection angle (P<0.001). CONCLUSION: The Prima One Gold group showed greater resistance to cyclic fatigue regardless of temperature and a greater deflection angle. The WaveOne Gold group showed a greater maximum torque value than the Prima One Gold group.

Accuracy of periapical and panoramic radiography for detection of root morphologies: a comparative study.

Maxillary and mandibular incisors have increased risk for severe orthodontically induced inflammatory root resorption. A patient-related risk factor is aberrant root morphology. This study aimed to assess the frequency of detection of different root morphologies in anterior teeth using dental panoramic tomography (DPT) and long cone periapical radiographs (LCPAs). A retrospective cross-sectional design was used to assess a sample of 50 consecutive pre-treatment radiographic records of patients from a specialist orthodontic practice in Adelaide, Australia. A reference guide was developed that included three previously unreported morphologies: pipette and bent, bent and pointed, bent and blunt. Two trained and calibrated assessors examined each record against the inclusion criteria, then independently assessed each anterior tooth from DPTs and LCPAs to detect the type of root morphology present. Data were analysed using the chi-square statistical test. Radiographic records for 48 patients (48 DPTs and 161 LCPAs) were eligible, with 355 and 426 teeth on DPTs and LCPAs, respectively, included for assessment. Normal root morphology (119 teeth) was commonly observed in DPTs, while bent (154 teeth) was frequently observed using LCPAs. Mandibular incisors often had normal morphology in DPTs but bent in LCPAs. Bent was the most common morphology in maxillary lateral incisors using DPT and LCPAs, although maxillary centrals were mostly normal in DPTs but pointed in LCPAs. Differences using the two image acquisition methods were highly significant (p < 0.01). Aberrant root morphologies are more easily detected in anterior teeth using LCPAs compared to DPTs.

Cone Beam Computed Tomography Assessment of the Volume of Dental Tissue Removed During Endodontic Access.

Introduction: The purpose of this study was to determine the volume of dental tissue removed during endodontic access preparation with cone-beam computed tomography (CBCT) comparing two different software. Methods and Materials: CBCT images of 20 teeth were obtained before and after endodontic access performed with spherical and conical diamond burs. The images were taken with i-CAT Precise system with 0.25 mm voxel size. Digital Imaging and Communications in Medicine (DICOM) images were loaded on two different software programs (Materialise® and InVersalius®), and a 3D reconstruction of the CBCT images was performed on both programs. The baseline volume (BV), and the final volume (FV) were obtained, and the lost tissue volume (LV) was calculated using the formula: LV=BV-FV. The t-test was used to compare initial and final volumes and also to compare the two programs, using a significance level of 5%. Results: The volumetric data calculated for the Materialise  and the InVesalius  programs were, respectively: BV-mean of 441.79±85.08 mm3 and 442.01±84.83 mm3; FV-mean of 426.75±83.88 mm3 and 426.94±83.75 mm3; LV-mean of 15.04±4.32 mm3 and 15.07±4.16 mm3. No statistically significant difference was found in the volumes calculated by either program for initial, final, or removed tissue (P>0.05). However, there was a significant difference between the BV and LV calculated on the same program (P<0.05). Conclusion: Our in vitro study showed that CBCT was able to determine the volume of dental tissue removed in the endodontic access preparation of extracted human teeth, regardless of the software program used.

Comparative analysis of bond strength to root dentin and compression of bioceramic cements used in regenerative endodontic procedures.

OBJECTIVES: This study compared the Biodentine, MTA Repair HP, and Bio-C Repair bioceramics in terms of bond strength to dentin, failure mode, and compression. MATERIALS AND METHODS: Fifty-four slices obtained from the cervical third of 18 single-rooted human mandibular premolars were randomly distributed (n = 18). After insertion of the bioceramic materials, the push-out test was performed. The failure mode was analyzed using stereomicroscopy. Another set of cylindrically-shaped bioceramic samples (n = 10) was prepared for compressive strength testing. The normality of data distribution was analyzed using the Shapiro-Wilk test. The Kruskal-Wallis and Friedman tests were used for the push-out test data, while compressive strength was analyzed with analysis of variance and the Tukey test, considering a significance level of 0.05. RESULTS: Biodentine presented a higher median bond strength value (14.79 MPa) than MTA Repair HP (8.84 MPa) and Bio-C Repair (3.48 MPa), with a significant difference only between Biodentine and Bio-C Repair. In the Biodentine group, the most frequent failure mode was mixed (61%), while in the MTA Repair HP and Bio-C Repair groups, it was adhesive (94% and 72%, respectively). Biodentine showed greater resistance to compression (29.59 ± 8.47 MPa) than MTA Repair HP (18.68 ± 7.40 MPa) and Bio-C Repair (19.96 ± 3.96 MPa) (p < 0.05). CONCLUSIONS: Biodentine showed greater compressive strength than MTA Repair HP and Bio-C Repair, and greater bond strength than Bio-C Repair. The most frequent failure mode of Biodentine was mixed, while that of MTA Repair HP and Bio-C Repair was adhesive.

Cone-beam and micro-computed tomography for the assessment of root canal morphology: a systematic review.

This study presents an overview of the accuracy of cone beam computed tomography (CBCT) compared with micro-computed tomography (µCT) in the assessment of root canal morphology of extracted human permanent teeth. A database search in PubMed, PubMed Central, Embase, Scopus, Opengrey, Scielo and Virtual Health Library was conducted which compared root canal morphology of extracted human permanent teeth on the accuracy of CBCT with µCT. In accordance with PRISMA statement guidelines, data were extracted on study characteristics, target mediators, sampling and assay techniques and the parameters associated with obtaining the image and ability to identify the root canal morphology. Amongst 2734 records, ten fulfilled the inclusion criteria. Four studies compared the accuracy of CBCT and µCT in the assessment of root canal morphology using Vertucci's classification, with at least one CBCT group or subgroup of each study presented high agreement compared to the µCT. Six studies assessed more detailed root canal morphology, including two articles that found a lack of agreement between these imaging systems. Risk of bias was deemed low in three studies, moderate in four and high in three. CBCT can be as accurate as µCT in the assessment of several morphological features of extracted human permanent teeth; however there are some exceptions related to the more detailed morphological aspects. Voxel size likely influences the ability to detect these features, though the different aspects of exposure setting used in studies components may be confounding factors. CBCT may be considered for the assessment of root canal morphology ex-vivo.

Sealing ability of three commercial resin-based endodontic sealers.

This study sought to compare the leakage of micro-organisms through root canals that had been obturated using one of three commercial endodontic sealers. Forty maxillary anterior human teeth were randomly assigned to one of three groups, depending on the sealer used. This study utilized an in vitro microbial leakage test with a split chamber design. A mixture of bacterial markers was placed in the upper chamber and could reach the lower chamber (which contained brain heart infusion broth) only by leaking through the root canal filling. Microbial leakage was checked daily for 60 days and data were analyzed statistically by Kruskal-Wallis and Mann-Whitney tests. The materials were further evaluated for antimicrobial effect by an agar diffusion test. The results of the leakage test showed no statistically significant difference between Sealer 26 and AH Plus, although both materials differed significantly from Resilon/Epiphany, which took less time to display microbial leakage. All three sealers demonstrated microbial leakage in less than 60 days; however, the agar diffusion test showed that AH Plus and Resilon/Epiphany induced significantly larger microbial inhibition zones than those induced by Sealer 26.

Effect of dental bleaching on pulp oxygen saturation in maxillary central incisors - a randomized clinical trial.

OBJECTIVE: To assess pulp oxygen saturation levels (SaO2) in maxillary central incisors after dental bleaching. MATERIALS AND METHODS: 80 participants (160 teeth) were randomly allocated to four groups: G1 In-office bleaching with two applications of 35% hydrogen peroxide (HP) (20 minutes), followed by at-home bleaching with 10% carbamide peroxide (CP) (2 hours/day for 16 days); G2 - Same protocol as G1, plus desensitizing toothpaste; G3 - In-office bleaching with 35% HP and one application of placebo gel (20 minutes), followed by at-home bleaching with 10% CP (2 hours/day for 16 days); and G4 - Same protocol as G3, plus desensitizing toothpaste. Pulp SaO2 levels were measured before (T0) and immediately after (T1) in-office bleaching; on the 5th (T2), 8th (T3), 12th (T4), and 16th days of at-home bleaching (T5); and on the 7th (T6) and 30th (T7) days. Mean (SD) pulp SaO2 levels were compared within groups by generalized estimating equations (GEE) and Student's t-test (P<0.05). RESULTS: Mean pulp SaO2 at T0 was 84.29% in G1, 84.38% in G2, 84.79% in G3, and 85.83% in G4. At T1, these values decreased to 81.96%, 82.06%, 82.19%, and 81.15% in G1, G2, G3, and G4 respectively, with significant difference in G4 (P<0.05). During home bleaching, pulp SaO2 levels varied in all groups, with 86.55%, 86.60%, 85.71%, and 87.15% means at T7 for G1, G2, G3, and G4, respectively; G2 presented significant difference (P<0.05). CONCLUSIONS: Pulp SaO2 level in maxillary central incisors was similar at baseline, reducing immediately after in-office bleaching, regardless of using desensitizing toothpaste and increasing at 30 days after dental bleaching.

Root perforations: a review of diagnosis, prognosis and materials.

Root perforation results in the communication between root canal walls and periodontal space (external tooth surface). It is commonly caused by an operative procedural accident or pathological alteration (such as extensive dental caries, and external or internal inflammatory root resorption). Different factors may predispose to this communication, such as the presence of pulp stones, calcification, resorptions, tooth malposition (unusual inclination in the arch, tipping or rotation), an extra-coronal restoration or intracanal posts. The diagnosis of dental pulp and/or periapical tissue previous to root perforation is an important predictor of prognosis (including such issues as clinically healthy pulp, inflamed or infected pulp, primary or secondary infection, and presence or absence of intracanal post). Clinical and imaging exams are necessary to identify root perforation. Cone-beam computed tomography constitutes an important resource for the diagnosis and prognosis of this clinical condition. Clinical factors influencing the prognosis and healing of root perforations include its treatment timeline, extent and location. A small root perforation, sealed immediately and apical to the crest bone and epithelial attachment, presents with a better prognosis. The three most widely recommended materials to seal root perforations have been calcium hydroxide, mineral trioxide aggregate and calcium silicate cements. This review aimed to discuss contemporary therapeutic alternatives to treat root canal perforations. Accordingly, the essential aspects for repairing this deleterious tissue injury will be addressed, including its diagnosis, prognosis, and a discussion about the materials actually suggested to seal root canal perforation.

Does radiotherapy treatment alter the pulp condition in patients with head and neck cancer? A systematic review

Abstract The main purpose of this study was to answer the question: "Can radiotherapy cause changes in the dental pulp condition of patients treated with irradiation in the head and neck region?" Clinical observational studies in adults with head and neck cancer undergoing treatment with ionizing radiation, longitudinal or cross-sectional follow-up to measure oxygen saturation (SpO2), and/or pulp sensitivity test to cold stimulation, were considered eligible. A systematic literature search was performed in six different databases, including the gray literature, and in article references. Two independent evaluators selected the studies, extracted the data, recorded the data on electronic spreadsheets, and then evaluated the methodological quality using the Checklist for Quasi-Experimental Studies tool devised by JBI. The data were assessed qualitatively using the Synthesis Without Metanalysis (SWiM) guidelines. After removing the duplicate articles, carefully analyzing the titles and abstracts, and reading the papers in full, seven studies were included. Four of the studies evaluated applied the cold sensitivity test, two associated pulse oximetry and cold sensitivity, and only one used just pulse oximetry. Evaluation using the cold sensitivity test and pulse oximetry in the initial periods before radiotherapy showed a decrease in the sensitive response and in SpO2 levels during a maximum period of 1 year. However, analyses thereafter indicated a normal response in both tests from 5 to 6 years after the end of radiotherapy treatment. Radiotherapy causes changes in pulp behavior patterns in the short term; however, recovery and return to average values occurs after long periods.

Evaluation in the danger zone of mandibular molars after root canal preparation using novel CBCT software

Abstract: This study measured the thickness of cementum/dentin in the danger zone of the mandibular molars after root canal preparation using novel cone-beam computed tomography (CBCT) software. Eighty-four teeth were distributed into four groups: ProTaper Next, BioRace, Reciproc Blue, and WaveOne Gold. E-Vol DX® CBCT software was used to measure initial and final remaining cementum-dentin thicknesses after root canal preparation of the mesial root of mandibular molars at 1 and 3 mm from the furcation. The Kolmogorov-Smirnov test was used to test variable symmetry. The variables were described as mean and standard deviations, compared among the groups using analysis of variance (ANOVA), and within the groups using the Student t test. A generalized estimating equation model was used to compare the variation before and after root canal preparation. The level of significance was set at 5%. Differences between mean initial and final thicknesses of the mesiobuccal (MB) and mesiolingual (ML) canals were not statistically significant. The mean initial thickness was 3 mm (0.900 mm ± 0.191), considering that a mean lower than 1 mm (1.035 mm ± 0.184) indicates the danger zone. Although cementum/dentin is thinner at 3 mm from the furcation (0.715±0.186) after root canal preparation, the greatest amount of dentin removed was found at 1 mm (0.734 ± 0.191). The cementum-dentin remaining after preparation was thicker than 0.715 mm in root canals prepared using #35 (WaveOne Gold®) and #40 (ProTaper Next®, BioRace® and Reciproc Blue®) instruments. This confirms the safety of canal preparation in the danger zone using these systems.

Antimicrobial potential of ozone in an ultrasonic cleaning system against Staphylococcus aureus.

The aim of this study was to evaluate the antimicrobial potential of ozone applied to 3 different solutions in an ultrasonic cleaning system against Staphylococcus aureus. A total of 120 mL of S. aureus were mixed in 6 L of the experimental solutions (sterile distilled water, vinegar and sterile distilled water + Endozime AWpluz) used in a ultrasonic cleaning system (UCS). Ozone was produced by an electric discharge through a current of oxygen and bubbling with flow rate at 7 g/h ozone (1.2%) into the microbial suspensions. Ten mL of each experimental suspension were collected and 5 fold dilutions were made in 9 mL of BHI and incubated at 37 degrees C for 48 h. Bacterial growth was evaluated by turbidity of the culture medium. At the same time, 1 mL of bacterial samples was collected and inoculated in BHIA plates. After incubation at 37 degrees C for 48 h, the number of colony forming units (cfu) per mL on BHIA surface was counted. In dilution test in BHI tubes and in BHIA plates (cfu/mL), bacterial growth was not observed in any of the experimental solutions when ozone was added. Under the tested conditions, it may be concluded that the addition of ozone to a ultrasonic cleaning system containing different experimental solutions resulted in antibacterial activity against S. aureus.

Antimicrobial analysis of different root canal filling pastes used in pediatric dentistry by two experimental methods.

The objective of this study was to compare, by two experimental methods, the antimicrobial efficacy of different root canal filling pastes used in pediatric dentistry. The tested materials were: Guedes-Pinto paste (GPP), zinc oxide-eugenol paste (OZEP), calcium hydroxide paste (CHP), chloramphenicol + tetracycline + zinc oxide and eugenol paste (CTZP) and Vitapex. Fiven microbial strains (S. aureus, E. faecalis, P. aeruginosa, B. subtilis and C. albicans) obtained from the American Type Culture Collection were inoculated in Brain Heart Infusion (BHI) and incubated at 37 degrees C for 24 h. For the direct exposure test (DET), 72 paper points were contaminated with the standard microbial suspensions and exposed to the root canal filling pastes for 1, 24, 48 and 72 h. The points were immersed in Letheen Broth (LB), followed by incubation at 37 degrees C for 48 h. An inoculum of 0.1 mL obtained from LB was then transferred to 7 mL of BHI, under identical incubations conditions and the microbial growth was evaluated. The pastes showed activity between 1 and 24 h, depending on the material. For the agar diffusion test (ADT), 30 Petri plates with 20 mL of BHI agar were inoculated with 0.1 mL of the microbial suspension, using sterile swabs that were spread on the medium. Three cavities were made in each agar plate (total = 90) and completely filled with one of the filling root canal pastes. The plates were pre-incubated for 1 h at room temperature and then incubated at 37 degrees C for 24 to 48 h. The inhibition zone around each well was recorded in mm. The complete antimicrobial effect in the direct exposure test was observed after 24 h on all microbial indicators. All root canal filling materials induced the formation of inhibition zones, except for Vitapex (range, 6.0-39.0 mm).

Accuracy of periapical and panoramic radiography for detection of root morphologies: a comparative study

Abstract: Maxillary and mandibular incisors have increased risk for severe orthodontically induced inflammatory root resorption. A patient-related risk factor is aberrant root morphology. This study aimed to assess the frequency of detection of different root morphologies in anterior teeth using dental panoramic tomography (DPT) and long cone periapical radiographs (LCPAs). A retrospective cross-sectional design was used to assess a sample of 50 consecutive pre-treatment radiographic records of patients from a specialist orthodontic practice in Adelaide, Australia. A reference guide was developed that included three previously unreported morphologies: pipette and bent, bent and pointed, bent and blunt. Two trained and calibrated assessors examined each record against the inclusion criteria, then independently assessed each anterior tooth from DPTs and LCPAs to detect the type of root morphology present. Data were analysed using the chi-square statistical test. Radiographic records for 48 patients (48 DPTs and 161 LCPAs) were eligible, with 355 and 426 teeth on DPTs and LCPAs, respectively, included for assessment. Normal root morphology (119 teeth) was commonly observed in DPTs, while bent (154 teeth) was frequently observed using LCPAs. Mandibular incisors often had normal morphology in DPTs but bent in LCPAs. Bent was the most common morphology in maxillary lateral incisors using DPT and LCPAs, although maxillary centrals were mostly normal in DPTs but pointed in LCPAs. Differences using the two image acquisition methods were highly significant (p < 0.01). Aberrant root morphologies are more easily detected in anterior teeth using LCPAs compared to DPTs.

Immune-Inflammatory Cell Profile and Receptor Activator of Nuclear Factor Kappa B Ligand/Osteoprotegerin Expression in Persistent Apical Periodontitis after Root Canal Retreatment Failure.

INTRODUCTION: This study assessed the immune-inflammatory profile and the expression of bone resorption activators receptor activator of nuclear factor kappa B ligand (RANKL) and inhibitor osteoprotegerin (OPG) in apical periodontitis (n = 20) that persisted after root canal retreatment. METHODS: Immunohistochemistry was used to characterize lymphocyte populations (CD3+, CD45RO+, CD8+, and FoxP3+ cells), macrophages (CD68+), RANKL+ and OPG+ cells in persistent apical periodontitis (PAP) and primary periapical lesions (PPLs). By using quantitative real-time polymerase chain reaction, the mRNA expression of RANKL and OPG in PAP and periodontal ligament from healthy teeth was comparatively analyzed. The data were analyzed by Mann-Whitney, Pearson χ2, and Wilcoxon tests (5% level). RESULTS: PAP showed an elevated number of FoxP3+ cells compared with PPL (P < .001). The number of CD68+ cells was reduced in the PAP samples compared with the PPLs (P < .001). Similar number of other lymphocyte populations was observed in PAP and PPLs (P > .05 for all comparisons). No differences in the RANKL, OPG, and immune-inflammatory cells were demonstrated when comparing PAP microscopically classified as cyst with those classified as granulomas (P > .05 for all comparisons). The assessment of mRNA expression revealed higher levels of RANKL and OPG in PAP compared with the periodontal ligament from healthy teeth (control) samples (P < .001). Also, a greater expression of RANKL in comparison with OPG was observed in PAP (P < .001). CONCLUSIONS: These findings indicate that PAP consists of biologically active lesions that demonstrate potential of bone resorption (higher expression of RANKL) and is characterized by an immune-inflammatory cell profile that suggests a suppressive and regulatory environment (higher number of FoxP3+ cells and lower number of macrophages) favorable to more chronic clinical behavior.

Expression of CD90 and P75NTR stem cell markers in ameloblastomas: a possible role in their biological behavior.

Multicystic and unicystic ameloblastomas are benign odontogenic tumors that present distinct biological behavior. The investigation of stem cells has become an important branch of tumor biology, with several studies addressing the possible role of these cells in tumor growth, angiogenesis, progression, infiltration and invasiveness. This study evaluated the immunohistochemical expression of CD90(Thy-1) and P75NTR stem cell markers in multicystic and unicystic ameloblastomas. Seventeen (17) samples of ameloblastomas (multicystic, n = 10; unicystic, n = 7) were submitted to immunohistochemical reactions and graded semi-quantitatively. The Kolmogorov-Smirnov test was used to verify possible differences in CD90 and P75NTR expressions between multicystic and unicystic ameloblastomas (p < 0.05). CD90 immunostaining was observed in all multicystic ameloblastoma specimens (n = 10), in the cytoplasm of the fibroblasts and vascular endothelial cells of the tumor stroma, near the neoplastic odontogenic epithelia. The staining of stromal CD90 was significantly higher in multicystic than in unicystic ameloblastomas (p = 0.003). Nuclear P75NTR immunostaining was observed in all ameloblastoma specimens. A significant difference was seen in the epithelial staining of P75NTR between multicystic and unicystic types (p = 0.007). The increased expression of CD90 and P75NTR found in multicystic ameloblastomas suggests a behavioral biological difference between multicystic and unicystic ameloblastomas, as well as a difference in ameloblastoma development.