Nitrogen-Doped 3D-Graphene Advances Near-Infrared Photodetector for Logic Circuits and Image Sensors Overcoming 2D Limitations.

The limitations of two-dimensional (2D) graphene in broadband photodetector are overcome by integrating nitrogen (N) doping into three-dimensional (3D) structures within silicon (Si) via plasma-assisted chemical vapor deposition (PACVD) technology. This contributes to the construction of vertical Schottky heterojunction broad-spectrum photodetectors and applications in logic devices and image sensors. The natural nanoscale resonant cavity structure of 3D-graphene enhances photon capture efficiency, thereby increasing photocarrier generation. N-doping can fine-tune the electronic structure, advancing the Schottky barrier height and reducing dark current. The as-fabricated photodetector exhibits exceptional self-driven photoresponse, especially at 1550 nm, with an excellent photoresponsivity (79.6 A/W), specific detectivity (1013 Jones), and rapid response of 130 µs. Moreover, it enables logic circuits, high-resolution pattern image recognition, and broadband spectra recording across the visible to near-infrared range (400-1550 nm). This research will provide new views and technical support for the development and widespread application of high-performance semiconductor-based graphene broadband detectors.

Fabrication of Carbon-Based Quantum Dots via a "Bottom-Up" Approach: Topology, Chirality, and Free Radical Processes in "Building Blocks".

The discovery of carbon-based quantum dots (CQDs) has allowed opportunities for fluorescence bioimaging, tumor diagnosis and treatment, and photo-/electro-catalysis. Nevertheless, in the existing reviews related to the "bottom-up" approaches, attention is mainly paid to the applications of CQDs but not the formation mechanism of CQDs, which mainly derived from the high complexities during the synthesis of CQDs. Among the various synthetic methods, using small molecules as "building blocks", the development of a "bottom-up" approach has promoted the structural design, modulation of the photoluminescence properties, and control of the interfacial properties of CQDs. On the other hand, many works have demonstrated the "building blocks"-dependent properties of CQDs. In this review, from one of the most important variables, the relationships among intrinsic properties of "building blocks" and photoluminescence properties of CQDs are summarized. The topology, chirality, and free radical process are selected as descriptors for the intrinsic properties of "building blocks". This review focuses on the induction and summary of recent research results from the "bottom-up" process. Moreover, several empirical rules pertaining thereto are also proposed.

Graphene Quantum Dots with Pyrrole N and Pyridine N: Superior Reactive Oxygen Species Generation Efficiency for Metal-Free Sonodynamic Tumor Therapy.

Those responsible for the development of sonosensitizers are faced with a dilemma between high sonosensitization efficacy and good biosecurity that limited the development of sonodynamic therapy (SDT). Herein, inspired by the intriguing therapeutic features of SDT and the potential catalytic activity of graphene quantum dots, the potential of N-doped graphene quantum dots (N-GQDs) to act as a sonosensitizer is demonstrated. The superior sonosensitization effect of N-GQDs is believed to be three to five times higher than that of traditional sonosensitizers (such as porphyrin, porphyrin Mn, porphyrin Zn, TiO2 , etc.). More importantly, the sonochemical mechanism of N-GQDs is revealed. Pyrrole N and pyridine N are believed to form catalytic centers in sonochemical processing of N-GQDs. This knowledge is important from the perspective of understanding the structure-dependent SDT enhancement of carbon nanostructure. Moreover, N-GQDs modified by folic acid (FA-N-GQDs) show a high marker rate for tumor cells (greater than 96%). Both in vitro and in vivo therapeutic results have exhibited high tumor inhibition efficiency (greater than 90%) of FA-N-GQDs as sonosensitizers while the oxidative stress response of tumor cells is activated through the PEX pathway and induced apoptosis via the p53 pathway.

Magnetic graphene quantum dots facilitate closed-tube one-step detection of SARS-CoV-2 with ultra-low field NMR relaxometry.

The rapid and sensitive diagnosis of the highly contagious severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) is one of the crucial issues at the outbreak of the ongoing global pandemic that has no valid cure. Here, we propose a SARS-CoV-2 antibody conjugated magnetic graphene quantum dots (GQDs)-based magnetic relaxation switch (MRSw) that specifically recognizes the SARS-CoV-2. The probe of MRSw can be directly mixed with the test sample in a fully sealed vial without sample pretreatment, which largely reduces the testers' risk of infection during the operation. The closed-tube one-step strategy to detect SARS-CoV-2 is developed with home-made ultra-low field nuclear magnetic resonance (ULF NMR) relaxometry working at 118 µT. The magnetic GQDs-based probe shows ultra-high sensitivity in the detection of SARS-CoV-2 due to its high magnetic relaxivity, and the limit of detection is optimized to 248 Particles mL‒1. Meanwhile, the detection time in ULF NMR system is only 2 min, which can significantly improve the efficiency of detection. In short, the magnetic GQDs-based MRSw coupled with ULF NMR can realize a rapid, safe, and sensitive detection of SARS-CoV-2.

Carbon-Based Quantum Dots with Solid-State Photoluminescent: Mechanism, Implementation, and Application.

Carbon-based quantum dots (CQDs), including spherical carbon dots and graphene quantum dots, are an emerging class of photoluminescent (PL) materials with unique properties. Great progress has been made in the design and fabrication of high-performance CQDs, however, the challenge of developing solid-state PL CQDs have aroused great interest among researchers. A clear PL mechanism is the basis for the development of high-performance solid-state CQDs for light emission and is also a prerequisite for the realization of multiple practical applications. However, the extremely complex structure of a CQD greatly limits the understanding of the solid-state PL mechanism of CQDs. So far, a variety of models have been proposed to explain the PL of solid-state CQDs, but they have not been unified. This review summarizes the current understanding of the solid-state PL of solid-state CQDs from the perspective of energy band theory and electronic transitions. In addition, the common strategies for realizing solid-state PL in CQDs are also summarized. Furthermore, the applications of CQDs in the fields of light-emitting devices, anti-counterfeiting, fingerprint detection, etc., are proposed. Finally, a brief outlook is given, highlighting current problems, and directions for development of solid-state PL of CQDs.

Promising Fast Energy Transfer System Between Graphene Quantum Dots and the Application in Fluorescent Bioimaging.

Tunable photoluminescence performance of graphene quantum dots (GQDs) is one of the most important topics for the development of GQDs. In this paper, we report lattice-doped GQDs (boron-doped GQDs (B-GQDs) and phosphorus-doped GQDs (P-GQDs)). Because of the matched band structure, the fast energy transfer between blue-emitted B-GQDs (emission wavelength: 460 nm) and orange-emitted P-GQDs (emission wavelength: 630 nm) can induce an efficient fluorescence emission in P-GQDs once B-GQDs are excited under the optimal excitation wavelength of 460 nm. Moreover, with the effective energy transfer, the quantum yield of P-GQDs increased to 0.48, which is much higher than that of pure P-GQDs. We also demonstrated the potentials of this system for fluorescent bioimaging in vitro.

Electrochemical Cutting in Weak Aqueous Electrolytes: The Strategy for Efficient and Controllable Preparation of Graphene Quantum Dots.

The controllable and efficient electrochemical preparation of highly crystalline graphene quantum dots (GQDs) in an aqueous system is still challenging. Here, we developed a weak electrolyte-based (typically an ammonia solution) electrochemical method to enhance the oxidation and cutting process and therefore achieve a high yield of GQDs. The yield of GQDs (3-8 nm) is 28%, approximately 28 times higher than the yield of GQDs prepared by other strong electrolytes. The whole preparation process can be accomplished within 2 h because of the effective free radical oxidation process and the suppressed intercalation-induced exfoliation in weakly ionized aqueous electrolytes. The GQDs also showed excellent crystallinity which is obviously better than the crystallinity of GQDs obtained via bottom-up approaches. Moreover, amino-functionalization of GQDs can be realized by manipulating the electrolyte concentration. We further demonstrate that the proposed method can also be expanded to other weak electrolytes (such as HF and H2S) and different anode precursor materials (such as graphene/graphite papers, carbon fibers, and carbon nanotubes).

Three-dimensional cross-linking composite of graphene, carbon nanotubes and Si nanoparticles for lithium ion battery anode.

Various graphene-based Si nanocomposites have been reported to improve the performance of active materials in Li-ion batteries. However, these candidates still yield severe capacity fading due to the electrical disconnection and fractures caused by the huge volume changes over extended cycles. Therefore, we have designed a novel three-dimensional cross-linked graphene and single-wall carbon nanotube structure to encapsulate the Si nanoparticles. The synthesized three-dimensional structure is attributed to the excellent self-assembly of carbon nanotubes with graphene oxide as well as a thermal treatment process at 900 °C. This special structure provides sufficient void spaces for the volume expansion of Si nanoparticles and channels for the diffusion of ions and electrons. In addition, the cross-linking of the graphene and single-wall carbon nanotubes also strengthens the stability of the structure. As a result, the volume expansion of the Si nanoparticles is restrained. The specific capacity remains at 1450 mAh g-1 after 100 cycles at 200 mA g-1. This well-defined three-dimensional structure facilitates superior capacity and cycling stability in comparison with bare Si and a mechanically mixed composite electrode of graphene, single-wall carbon nanotubes and silicon nanoparticles.

Insights into the Oxidation Mechanism of sp2-sp3 Hybrid Carbon Materials: Preparation of a Water-Soluble 2D Porous Conductive Network and Detectable Molecule Separation.

A thorough investigation of the oxidation mechanism of sp2-sp3 hybrid carbon materials is helpful for the morphological trimming of graphene. Here, porous graphene (PGN) was obtained via a free radical oxidation process. We further demonstrated the difference between traditional and free radical oxidation processes in sp2-sp3 hybrid carbon materials. The sp3 part of graphene oxide was oxidized first, and well-crystallized sp2 domains were reserved, which is different from the oxidation mechanism in a traditional approach. The obtained PGN shows excellent performance in the design of PGN-based detectable molecule separation or other biomedical applications.

Tunable amplified spontaneous emission in graphene quantum dots doped cholesteric liquid crystals.

Graphene quantum dots (GQDs) have received much research attention, because of their useful structure and optical absorption/emission. We report the tunable amplified spontaneous emission (ASE) in GQD-doped cholesteric liquid crystal (CLC), which to the best of our knowledge has not been previously observed. The GQDs are uniformly dispersed with a weight ratio of 0.5 wt.% in CLC. Under optical excitation, typical ASE is triggered in the system at pump energies greater than 1.25 mJ cm-2. The emission peak at the long wavelength edge of the photonic bandgap shifts from 662 to 669 nm, as the working temperature is increased from 50 to 90 °C. The preparation of the combined GQDs and CLC is simple and low-cost, and the resulting material is photostable and non-toxic. Combining the GQD gain material with the self-assembled CLC resonator has potential in the fabrication of ASE source and laser devices.

Graphene quantum dot incorporated perovskite films: passivating grain boundaries and facilitating electron extraction.

Organic-inorganic halide perovskites have emerged as attractive materials for use in photovoltaic cells. Owing to the existence of dangling bonds at the grain boundaries between perovskite crystals, minimizing the charge recombination at the surface or grain boundaries by passivating these trap states has been identified to be one of the most important strategies for further optimization of device performance. Previous reports have mainly focused on surface passivation by inserting special materials such as graphene or fullerene between the electron transfer layer and the perovskite film. Here, we report an enhanced efficiency of mesoscopic perovskite solar cells by using graphene quantum dots (GQDs) to passivate the grain boundaries of CH3NH3PbI3. The highest efficiency (17.62%) is achieved via decoration with 7% GQDs, which is an 8.2% enhancement with respect to a pure perovskite based device. Various analyses including electrochemical impedance spectroscopy, time-resolved photoluminescence decay and open-circuit voltage decay measurements are employed in investigating the mechanism behind the improvement in device performance. The findings reveal two important roles played by GQDs in promoting the performance of perovskite solar cells - that GQDs are conducive to facilitating electron extraction and can effectively passivate the electron traps at the perovskite grain boundaries.

How Graphene Islands Are Unidirectionally Aligned on the Ge(110) Surface.

The unidirectional alignment of graphene islands is essential to the synthesis of wafer-scale single-crystal graphene on Ge(110) surface, but the underlying mechanism is not well-understood. Here we report that the necessary coalignment of the nucleating graphene islands on Ge(110) surface is caused by the presence of step-pattern; we show that on the preannealed Ge(110) textureless surface the graphene islands appear nonpreferentially orientated, while on the Ge(110) surfaces with natural step pattern, all graphene islands emerge coaligned. First-principles calculations and theoretical analysis reveal this different alignment behaviors originate from the strong chemical binding formed between the graphene island edges and the atomic steps on the Ge(110) surface, and the lattice matching at edge-step interface dictates the alignment of graphene islands with the armchair direction of graphene along the [-110] direction of the Ge(110) substrate.

Supramolecular recognition control of polyethylene glycol modified N-doped graphene quantum dots: tunable selectivity for alkali and alkaline-earth metal ions.

The graphene quantum dot based fluorescent probe community needs unambiguous evidence about the control on the ion selectivity. In this paper, polyethylene glycol modified N-doped graphene quantum dots (PN-GQDs) were synthesized by alkylation reaction between graphene quantum dots and organic halides. We demonstrate the tunable selectivity and sensitivity by controlling the supramolecular recognition through the length and the end group size of the polyether chain on PN-GQDs. The relationship formulae between the selectivity/detection limit and polyether chains are experimentally deduced. The polyether chain length determines the interaction between the PN-GQDs and ions with different ratios of charge to radius, which in turn leads to a good selectivity control. Meanwhile the detection limit shows an exponential growth with the size of end groups of the polyether chain. The PN-GQDs can be used as ultrasensitive and selective fluorescent probes for Li(+), Na(+), K(+), Mg(2+), Ca(2+) and Sr(2+), respectively.

Ultrafast adsorption and selective desorption of aqueous aromatic dyes by graphene sheets modified by graphene quantum dots.

Graphene modified by graphene quantum dots (GQDs) has been employed to remove toxic organic dyes. An excellent removal capacity (497 mg g(-1)) and record-breaking adsorption rate (475 mg g(-1) min(-1) at 20 °C) were demonstrated for Rhodamine B. The enhancement in performance by nearly a factor of three compared to that of graphene was ascribed to the greatly increased accessible surface area of graphene in aqueous solution as well as the increase in surface charges with the modification with GQDs. Besides, this unique adsorption behavior of the modified graphene was expanded to other typical toxic aqueous aromatic dyes such as Evans Blue, Methyl Orange, Malachite Green and Rose Bengal. What is more, a unique desorption behavior of dyes was first observed when employing different solvents, which enabled the GQD-modified graphene to be exploited for selective extraction of dyes and recycling of the adsorbent. The adsorption and desorption mechanism were further investigated. Combining high removal capacity, rapid adsorption kinetics, good recyclability and unique selective desorption, GQD-modified graphene has potential applications in both water purification and separation of aromatic dyes.

3D periodic multiscale TiO2 architecture: a platform decorated with graphene quantum dots for enhanced photoelectrochemical water splitting.

Micropatterned TiO2 nanorods (TiO2NRs) via three-dimensional (3D) geometry engineering in both microscale and nanoscale decorated with graphene quantum dots (GQDs) have been demonstrated successfully. First, micropillar (MP) and microcave (MC) arrays of anatase TiO2 films are obtained through the sol-gel based thermal nanoimprinting method. Then they are employed as seed layers in hydrothermal growth to fabricate the 3D micropillar/microcave arrays of rutile TiO2NRs (NR), which show much-improved photoelectrochemical water-splitting performance than the TiO2NRs grown on flat seed layer. The zero-dimensional GQDs are sequentially deposited onto the surfaces of the microscale patterned nanorods. Owing to the fast charge separation that resulted from the favorable band alignment of the GQDs and rutile TiO2, the MP-NR-GQDs electrode achieves a photocurrent density up to 2.92 mA cm(-2) under simulated one-sun illumination. The incident-photon-to-current-conversion efficiency (IPCE) value up to 72% at 370 nm was achieved on the MP-NR-GQDs electrode, which outperforms the flat-NR counterpart by 69%. The IPCE results also imply that the improved photocurrent mainly benefits from the distinctly enhanced ultraviolet response. The work provides a cost-effective and flexible pathway to develop periodic 3D micropatterned photoelectrodes and is promising for the future deployment of high performance optoelectronic devices.

A Tape-Wrapping Strategy towards Electrochemical Fabrication of Water-Dispersible Graphene.

Graphene has achieved mass production via various preparative routes and demonstrated its uniqueness in many application fields for its intrinsically high electron mobility and thermal conductivity. However, graphene faces limitations in assembling macroscopic structures because of its hydrophobic property. Therefore, balancing high crystal quality and good aqueous dispersibility is of great importance in practical applications. Herein, we propose a tape-wrapping strategy to electrochemically fabricate water-dispersible graphene (w-Gr) with both excellent dispersibility (~4.5 mg/mL, stable over 2 months), and well-preserved crystalline structure. A large production rate (4.5 mg/min, six times faster than previous electrochemical methods), high yield (65.4% ≤5 atomic layers) and good processability are demonstrated. A mechanism investigation indicates that the rational design of anode configuration to ensure proper oxidation, deep exfoliation and unobstructed mass transfer is responsible for the high efficiency of this strategy. This simple yet efficient electrochemical method is expected to promote the scalable preparation and applications of graphene.

Fast proton transport enables the magnetic relaxation response of graphene quantum dots for monitoring the oxidative environment in vivo.

A magnetic relaxation switch (MRS) that targets small molecules such as H2O2 is difficult to realize because of the small size of the targets, which cannot gather enough MRS probes to form aggregates and generate a difference in magnetic relaxation times. Therefore, the development of small molecule-targeted MRS is strongly dependent on changes in the interfacial structure of the probe, which modulates the proton transport behavior near the probe. Herein, functionalized graphene quantum dots (GQDs) consisting of GQDs with disulfide bonds, polyethylene glycol (PEG), and paramagnetic Gd3+ were used as the MRS probe to sense H2O2. The structure of GQDs changed after reacting with H2O2. The PEG assembled a tube for transmitting changes in GQDs via proton transport and thus enabled the magnetic relaxation response of the probe towards H2O2. Pentaethylene glycol was experimentally and theoretically proven to have the strongest ability to transport protons. Such a probe can be applied in the differentiation of healthy and senescent cells/tissues using in vitro fluorescent imaging and in vivo magnetic resonance imaging. This work provides a reliable solution for building a proton transport route, which not only enables the response of the MRS probe towards the targets but also demonstrates the design of carbon nanostructures with proton transport behaviors.

The Synergistic Effect on the Mimetic Optical Structure of Feline Eyes toward Household Health Monitoring of Acute and Chronic Diseases.

A breakthrough in the performance of bionic optical structures will only be achieved if we can obtain an in-depth understanding of the synergy mechanisms operating in natural optical structures and find ways to imitate them. In this work, inspired by feline eyes, an optical substrate that takes advantage of a synergistic effect that occurs between resonant and reflective structures was designed. The synergistic effect between the reflective and resonant components leads to a Raman enhancement factor (EF) of 1.16 × 107, which is much greater than that achieved using the reflective/resonant cavities on their own. Finite-difference time-domain (FDTD) simulations and experimental results together confirm that the mechanism of this synergistic effect is achieved by realizing multiple reflections and repeated absorptions of light, generating a strong local electric field. Thus, a 2-3 order of magnitude increase in sensitivity could be achieved. More importantly, with the homemade centrifugal device, above optical substrates were further used to develop a rapidly highly sensitive household health monitoring system (detection time <3 min). It can thus be used to give early warning of acute diseases with high risk (e.g., acute myocardial infarction (AMI) and cerebral peduncle). Due to the good reusability and storability (9% and 8% reduction in EF after washing 30 times and 9 months of storage, respectively) of the substrates, the substrates thus reduce detection costs (to ∼$1), making them much cheaper to use than the current gold-standard methods (e.g., ∼$16 for gout detection).

Symmetry-Triggered Tunable Phosphorescence Lifetime of Graphene Quantum Dots in a Solid State.

Studying the phosphorescent mechanisms of carbon nanostructures synthesized by the "bottom-up" approach is key to understanding the structure modulation and the interfacial properties of carbon nanostructures. In this work, the relationships among symmetry of precursors in the "bottom-up" synthesis, structures of products, and phosphorescence lifetimes of graphene quantum dots (GQDs) are studied. The symmetry matching of precursors in the formation of a D6h graphene-like framework is considered the key factor in controlling the separability of sp2 domains in GQDs. As the separability of sp2 domains in GQDs increases, the phosphorescence lifetimes (14.8-125.5 ms) of GQDs in the solid state can be tuned. Machine learning is used to define the degree of disorder (S) of the GQD structure, which quantitatively describes the different space groups of precursors. The negative correlation between S and the oscillator strength of GQDs is uncovered. Therefore, S can be recognized as reflective of oscillator strength in the GQD structure. Finally, based on the correlations found between the structures and phosphorescence lifetimes of GQDs, GQDs with an ultralong phosphorescence lifetime (28.5 s) are obtained. Moreover, GQDs with visible phosphorescence emission (435-618 nm) are synthesized.

Accelerated proton dissociation in an excited state induces superacidic microenvironments around graphene quantum dots.

Investigating proton transport at the interface in an excited state facilitates the mechanistic investigation and utilization of nanomaterials. However, there is a lack of suitable tools for in-situ and interfacial analysis. Here we addresses this gap by in-situ observing the proton transport of graphene quantum dots (GQDs) in an excited state through reduction of magnetic resonance relaxation time. Experimental results, utilizing 0.1 mT ultra-low-field nuclear magnetic resonance relaxometry compatible with a light source, reveal the light-induced proton dissociation and acidity of GQDs' microenvironment in the excited state (Hammett acidity function: -13.40). Theoretical calculations demonstrate significant acidity enhancement in -OH functionalized GQDs with light induction ( p K a * = -4.62, stronger than that of H2SO4). Simulations highlight the contributions of edge and phenolic -OH groups to proton dissociation. The light-induced superacidic microenvironment of GQDs benefits functionalization and improves the catalytic performances of GQDs. Importantly, this work advances the understanding of interfacial properties of light-induced sp2-sp3 carbon nanostructure and provides a valuable tool for exploring catalyst interfaces in photocatalysis.