Square wave anodic stripping voltammetric determination of metoclopramide in tablet and urine at carbon paste electrode.

A simple, reliable and selective square wave anodic stripping (SWAS) voltammetric method at carbon paste electrode (CPE) of metoclopramide hydrochloride (MCP) in pharmaceutical dosage forms (tablet) and in biological fluids (spiked and real urine samples) has been developed and evaluated. Different parameters such as medium, supporting electrolyte, pH, accumulation potential, scan rate, accumulation time and ionic strength, were tested to optimize the conditions for the determination of MCP. The adsorbed form is oxidized irreversibly under optimal conditions, viz., 0.4M HCl-sodium acetate buffer (pH approximately 6.2), 0.2M KCl, a linear concentration ranges from 0.067 to 0.336, 0.067 to 0.269 and 0.067 to 0.269 ng/mL of MCP, at accumulation times 60, 120 and 180 s, respectively, can be determined successfully. The interferences of some common excipients and some metal ions were studied. The standard addition method was used to determine the MCP in pure solutions, tablets and in biological fluids with satisfactory results. The data obtained are compared with the standard official method.

Cathodic adsorptive stripping voltammetric determination of uranium with potassium hydrogen phthalate.

The adsorption properties of dioxouranium (II)-Phathalate complexes onto hanging mercury drop electrode are exploited in developing a highly sensitive and selective stripping voltammetric procedure for the determination of uranium (VI). The reduction current of adsorbed complex ions of U(VI) was measured by both linear sweep (LSCSV) and differential pulse cathodic stripping voltammetry (DPCSV), preceded by a period of preconcentration onto the electrode surface. As low as 2x10(-9) mol dm(-3) (0.5 mug/l) and 2x10(-8) mol dm(-3) (4.8 mug/l) with accumulation time 240 and 120 s using DPCSV and LSCSV, respectively, have been determined successfully. The relative standard deviation of 2.2% at the 5 ppm level was obtained. The interferences of some metal ions and anions were studied. The application of this method was tested in the determination of uranium in superphosphate fertilizer.

Differential pulse polarography of cadmium-and lead-urate and adsorptive stripping voltammetric determination of uric acid.

The complex formation between uric acid and zinc, cadmium and lead ions has been investigated using differential pulse polarography in 0.01M NaNO(3). It is found that the complexes formed by Cd(II) and Pb(II) ions with uric acid have the stoichiometry of 1:2 and the logarithmic values of the apparent stability constant are 9.47 and 11.7, respectively. On the other hand, zinc(II) ions do not give any indication of complexation with uric acid. A sensitive voltammetric method is developed for the quantitative determination of uric acid. This method is based on controlled adsorptive preconcentration of uric acid on the hanging mercury drop electrode (HMDE), followed by tracing the voltammogram in the cathodic going potential scan. The modes used are direct current stripping voltammetry (DCSV) and differential pulse stripping voltammetry (DPSV). The detection limits found were 8 x 10(-9)M (quiescent period 15 sec) by DPSV and 1.6 x 10(-8)M by DCSV.

Adsorptive stripping voltammetric determination of the antidepressant drug sulpiride.

The electrochemical behaviour of the antidepressant drug sulpiride (SP) at a hanging mercury drop electrode (HMDE) is investigated. Linear sweep cathodic stripping voltammetry (LSCSV) was used to determine sulpiride in the presence of 0.01 M sodium acetate medium pH 10.5 and 25 +/- 1 degrees C. Different parameters such as, supporting electrolyte, pH, accumulation potential, scan rate, accumulation time and ionic strength, were tested to optimize the conditions for the determination of SP. The adsorbed form is reduced irreversibly. The linear concentration range is from 2 x 10(-9) to 5 x 10(-8) M SP. Experimentally, 2 x 10(-9) M (0.68 ppb) with accumulation time 60 s can be determined successfully. Furthermore, a theoretical detection limit of 2 x 10(-10) M (0.068 ppb) Sp was calculated. The interferences of some metal ions, ascorbic acid and some amino acids were studied. The method was applied to the analysis of tablets and spiked urine, with recoveries of 104 +/- 3 and 101 + 3, and the relative standard deviation of 3.3 and 3.4%, respectively.

Anodic adsorptive stripping voltammetric determination of the anesthetic drug: methohexital sodium.

Methohexital (MS) determination is based on the formation of insoluble mercury salt on a hanging mercury drop electrode after preaccumulation by adsorption. This property was exploited in developing a highly sensitive stripping voltammetric procedure for the determination of the drug. The anodic current of adsorbed compound is measured by linear sweep anodic stripping voltammetry (LSASV), preceded by a period of preconcentration. The effect of various parameters such as supporting electrolyte composition, pH, initial potential, scan rate, accumulation time and ionic strength are discussed to characterize the interfacial and redox behavior. The detection limit was found to be 2x10(-7) M (56.8 ppb) with 180-s accumulation time. The interference of some amino acids, ascorbic acid and some metal ions was investigated. The application of this method was tested in the determination of methohexital in spiked urine samples. The precision of the method is satisfactory with a relative standard deviation of 2.5%.