Microemulsions: Breakthrough Electrolytes for Redox Flow Batteries.

Aqueous and non-aqueous redox flow batteries (RFBs) have limited energy and current densities, respectively, due to the nature of the electrolytes. New approaches to electrolyte design are needed to improve the performance of RFBs. In this work, we combined a highly conductive aqueous phase and an organic redox-active phase in a microemulsion to formulate a novel RFB electrolyte. As a proof-of-concept, we demonstrate an RFB using this microemulsion electrolyte with maximum current density of 17.5 mA·cm-2 with a 0.19 M posolyte and 0.09 M negolyte at a flow rate of only ∼2.5 ml·min-1, comparable to early vanadium electrolyte RFBs at similar flow rates on a per molar basis. The novel active negolyte component is an inexpensive oil-soluble vitamin (K3). By combining aqueous and organic phases, the solvent potential window and energy density may be increased without sacrificing current density and new redox couples may be accessed. Microemulsion electrolytes show great promise for improved performance and increased energy densities in aqueous RFBs but the path forward is complex. We end with discussion of areas that need work to achieve the potential of these electrolytes.

Hierarchical Lignin-Based Carbon Matrix and Carbon Dot Composite Electrodes for High-Performance Supercapacitors.

This work adopts an efficient chemical-wet method to build a three-dimensional (3D) carbon composite as an electrode material for high-performance supercapacitors (SCs). Carbon dots (CDs), prepared by thermal pyrolysis of citric acid and urea under microwaves at 280 °C, are homogeneously coated onto lignin-based activated carbons (ACs), thus forming the 3D composites possessing an interior surface decorated with CD binding sites. Benefiting from the hydrophilicity and ultrafine size of CDs, the affinity of the electrode surface toward aqueous electrolytes is significantly improved with the addition of CDs, leading to the enhanced effective surface area (i.e., abundant electroactive sites) and a decreased ionic diffusion path. The capacitance of the SCs is improved from 125.8 to 301.7 F g-1 with CD addition. The SC with CD addition possesses improved cycle stability with a coulombic efficiency around 100% after 3000 cycles. After cycling, the ion diffusion coefficient of the CD@AC-11 electrode is enhanced by 25.5 times as compared to that of the pristine AC one. This unique and robust carbon framework can be utilized for engineering the desired pore structure and micropore/mesopore fraction within the AC electrodes. This strategy of CD@AC electrodes demonstrates a promising route for using renewable porous carbon materials in advanced energy-storage devices.

Chemically Cross-Linked Cellulose Nanocrystal Aerogels for Effective Removal of Cation Dye.

In this study, porous aerogels were prepared by directional freeze-drying via cross-linking cellulose nanocrystals (CNCs) with poly(methyl vinyl ether-co-maleic acid) (PMVEMA) and poly(ethylene glycol) (PEG). The thermal properties and physical adsorption performance toward cation methylene blue dye of the obtained CNC aerogels were investigated. The maximum degradation temperature was increased from 324°C of CNCs to 355°C of cross-linked CNC aerogels. The dye adsorption isotherm results showed that the maximum methylene blue adsorption capacity of CNC aerogels was 116.2 mg g-1, according to the Langmuir model, which was mainly due to the electrostatic attractions between negatively charged carboxyl groups or sulfonate groups on the CNC aerogles and cation MB molecules. The reusability test showed that the CNC aerogels contained the same dye adsorption performance in five adsorption/desorption cycles. Overall, this study described an ideal alternative for water purification with high dye adsorption capacity and enhanced physical performance.

Tunable Synthesis of Hollow Metal-Nitrogen-Carbon Capsules for Efficient Oxygen Reduction Catalysis in Proton Exchange Membrane Fuel Cells.

Atomically dispersed metal catalysts anchored on nitrogen-doped (N-doped) carbons demand attention due to their superior catalytic activity relative to that of metal nanoparticle catalysts in energy storage and conversion processes. Herein, we introduce a simple and versatile strategy for the synthesis of hollow N-doped carbon capsules that contain one or more atomically dispersed metals (denoted as H-M-Nx-C and H-Mmix-Nx-C, respectively, where M = Fe, Co, or Ni). This method utilizes the pyrolysis of nanostructured core-shell precursors produced by coating a zeolitic imidazolate framework core with a metal-tannic acid (M-TA) coordination polymer shell (containing up to three different metal cations). Pyrolysis of these core-shell precursors affords hollow N-doped carbon capsules containing monometal sites (e.g., Fe-Nx, CoNx, or Ni-Nx) or multimetal sites (Fe/Co-Nx, Fe/Ni-Nx, Co/Ni-Nx, or Fe/Co/Ni-Nx). This inventory allowed exploration of the relationship between catalyst composition and electrochemical activity for the oxygen reduction reaction (ORR) in acidic solution. H-Fe-Nx-C, H-Co-Nx-C, H-FeCo-Nx-C, H-FeNi-Nx-C, and H-FeCoNi-Nx-C were particularly efficient ORR catalysts in acidic solution. Furthermore, the H-Fe-Nx-C catalyst exhibited outstanding initial performance when applied as a cathode material in a proton exchange membrane fuel cell. The synthetic methodology introduced here thus provides a convenient route for developing next-generation catalysts based on earth-abundant components.