In vitro antifungal and physicochemical properties of polymerized acrylic resin containing strontium-modified phosphate-based glass.

Acrylic resins are widely used as the main components in removable orthodontic appliances. However, poor oral hygiene and maintenance of orthodontic appliances provide a suitable environment for the growth of pathogenic microorganisms. In this study, strontium-modified phosphate-based glass (Sr-PBG) was added to orthodontic acrylic resin at 0% (control), 3.75%, 7.5%, and 15% by weight to evaluate the surface and physicochemical properties of the novel material and its in vitro antifungal effect against Candida albicans (C. albicans). Surface microhardness and contact angle did not vary between the control and 3.75% Sr-PBG groups (p > 0.05), and the flexural strength was lower in the experimental groups than in the control group (p < 0.05), but no difference was found with Sr-PBG content (p > 0.05). All experimental groups showed an antifungal effect at 24 and 48 h compared to that in the control group (p < 0.05). This study demonstrated that 3.75% Sr-PBG exhibits antifungal effects against C. albicans along with suitable physicochemical properties, which may help to minimize the risk of adverse effects associated with harmful microbial living on removable orthodontic appliances and promote the use of various materials.

Silicon nanowire biologically sensitive field effect transistors: electrical characteristics and applications.

The interest in biologically sensitive field effect transistors (BioFETs) is growing explosively due to their potential as biosensors in biomedical, environmental monitoring and security applications. Recently, adoption of silicon nanowires in BioFETs has enabled enhancement of sensitivity, device miniaturization, decreasing power consumption and emerging applications such as the 3D cell probe. In this review, we describe the device physics and operation of the silicon nanowire BioFETs along with recent advances in the field. The silicon nanowire BioFETs are basically the same as the conventional field-effect transistors (FETs) with the exceptions of nanowire channel instead of thin film and a liquid gate instead of the conventional gate. Therefore, the silicon device physics is important to understand the operation of the BioFETs. Herein, physical characteristics of the silicon nanowire FETs are described and the operational principles of the BioFETs are classified according to the number of gates and the analysis domain of the measured signal. Even the bottom-up process has merits on low-cost fabrication; the top-down process technique is highlighted here due to its reliability and reproducibility. Finally, recent advances in the silicon nanowire BioFETs in the literature are described and key features for commercialization are discussed.

Low-temperature solution growth of ZnO nanotube arrays.

Single crystal ZnO nanotube arrays were synthesized at low temperature in an aqueous solution containing zinc nitrate and hexamethylenetetramine. It was found that the pH value of the reaction solution played an important role in mediating the growth of ZnO nanostructures. A change in the growth temperature might change the pH value of the solution and bring about the structure conversion of ZnO from nanorods to nanotubes. It was proposed that the ZnO nanorods were initially formed while the reaction solution was at a relatively high temperature (~90 °C) and therefore enriched with colloidal Zn(OH)(2), which allowed a fast growth of ZnO nanocrystals along the [001] orientation to form nanorods. A decrease in the reaction temperature yielded a supersaturated solution, resulting in an increase in the concentration of OH(-) ions as well as the pH value of the solution. Colloidal Zn(OH)(2) in the supersaturated solution trended to precipitate. However, because of a slow diffusion process in view of the low temperature and low concentration of the colloidal Zn(OH)(2), the growth of the (001) plane of ZnO nanorods was limited and only occurred at the edge of the nanorods, eventually leading to the formation of a nanotube shape. In addition, it was demonstrated that the pH might impact the surface energy difference between the polar and non-polar faces of the ZnO crystal. Such a surface energy difference became small at high pH and hereby the prioritized growth of ZnO crystal along the [001] orientation was suppressed, facilitating the formation of nanotubes. This paper demonstrates a new strategy for the fabrication of ZnO nanotubes on a large scale and presents a more comprehensive understanding of the growth of tube-shaped ZnO in aqueous solution at low temperature.