Development and validation of a quantitative wipe sampling method to determine platinum contamination from antineoplastic drugs on surfaces in workplaces at Swedish hospitals.

INTRODUCTION: Antineoplastic drugs (ADs) are frequently used pharmaceuticals in the healthcare, and healthcare workers can be occupationally exposed to ADs. Monitoring of surface contamination is a common way to assess occupational exposure to ADs. The objective was to develop and validate a sensitive and quantitative monitoring method to determine surface contaminations of Pt as a marker for Pt-containing ADs. The surface contaminations of Pt-containing ADs were monitored at four Swedish hospital workplaces. METHODS: An analytical method was developed based on inductively coupled plasma mass spectrometry. The wipe sampling procedure was validated regarding different surface materials. The stability of collected wipe samples was investigated. Workplace surfaces were monitored by wipe sampling to determine contaminations of Pt-containing ADs. RESULTS: A wipe sampling and analytical method with a limit of detection of 0.1 pg Pt/cm2 was developed. Pt was detected in 67% of the wipe samples collected from four workplaces, and the concentrations ranged from <0.10 to 21100 pg/cm2. In 4% of samples, the detected surface contaminations of Pt in three hospital wards were above proposed hygienic guidance value (HGV) of Pt. In the hospital pharmacy, 9% of the detected surface contaminations of Pt were above lowest proposed HGV. CONCLUSIONS: A user-friendly, specific, and sensitive method for determination of surface contaminations of Pt from ADs in work environments was developed and validated. A large variation of contaminations was observed between detected surface contaminations of Pt in samples collected in wards, and it likely reflects differences in amounts handled and work practices between the wards.

Pilot study: External surface contamination of gemcitabine and 5-fluorouracil on drug packaging.

INTRODUCTION: Antineoplastic drugs (ADs) are commonly used pharmaceuticals for anticancer treatments. It has previously been shown that the external surface of drug vials frequently is contaminated with ADs. More than a decade ago methods to prevent occupational exposure were introduced by using plastic coverage of the glass vials or packing vials in a secondary plastic container. The aim of the pilot study was to determine contamination levels of ADs on different parts of AD packaging of two different commercially available drug vials on the Swedish market and to investigate the occurrence of cross contamination of ADs. METHODS: Packagings of gemcitabine (GEM) and 5-fluorouracil (5-FU) were tested by wipe sampling. Five ADs; GEM, 5-FU, cyclophosphamide (CP), ifosfamide and etoposide were quantified using liquid chromatography mass spectrometry. RESULTS: AD contaminations were detected in 69% and 60% of the GEM and 5-FU packaging samples. Highest levels, up to approximately 5 µg/sample, were observed on the glass vials. The protective shrink-wrap of 5-FU vials and the plastic container of GEM were contaminated with low levels of 5-FU and GEM, respectively, and furthermore the 5-FU vials with shrink-wrap were cross-contaminated with GEM. Cross-contamination of CP and GEM was detected on 5-FU vials with plastic shrink-wrap removed. CONCLUSIONS: External contamination of ADs are still present at primary drug packagings on the Swedish market. Protection of AD vials by plastic shrink-wrap or a secondary plastic container does not remove the external contamination levels completely. The presence of cross contamination of ADs on drug packagings was also observed.

Effects of cleaning spray use on eyes, airways, and ergonomic load.

BACKGROUND: Cleaning workers are exposed to chemicals and high physical workload, commonly resulting in airway problems and pain. In this study the response in the upper airways and the physical workload following airborne and ergonomic exposure of cleaning spray was investigated. METHODS: A survey was answered by professional cleaning workers to investigate their use of cleaning sprays and the perceived effects on eyes, airways and musculoskeletal pain. A human chamber exposure study was then conducted with 11 professional cleaning workers and 8 non-professional cleaning workers to investigate the airborne exposure, acute effects on eyes and airways, and physical load during cleaning with sprays, foam application and microfiber cloths premoistened with water. All cleaning products used were bleach, chlorine, and ammonia free. The medical assessment included eye and airway parameters, inflammatory markers in blood and nasal lavage, as well as technical recordings of the physical workload. RESULTS: A high frequency of spray use (77%) was found among the 225 professional cleaning workers that answered the survey. Based on the survey, there was an eight times higher risk (p < 0.001) of self-experienced symptoms (including symptoms in the nose, eyes and throat, coughing or difficulty breathing) when they used sprays compared to when they cleaned with other methods. During the chamber study, when switching from spray to foam, the airborne particle and volatile organic compound (VOC) concentrations showed a decrease by 7 and 2.5 times, respectively. For the whole group, the peak nasal inspiratory flow decreased (-10.9 L/min, p = 0.01) during spray use compared to using only water-premoistened microfiber cloths. These effects were lower during foam use (-4.7 L/min, p = 0.19). The technical recordings showed a high physical workload regardless of cleaning with spray or with water. CONCLUSION: Switching from a spraying to a foaming nozzle decreases the exposure of both airborne particles and VOCs, and thereby reduces eye and airway effects, and does not increase the ergonomic load. If the use of cleaning products tested in this study, i.e. bleach, chlorine, and ammonia free, cannot be avoided, foam application is preferable to spray application to improve the occupational environment.

Lung function and self-rated symptoms in healthy volunteers after exposure to hydrotreated vegetable oil (HVO) exhaust with and without particles.

BACKGROUND: Diesel engine exhaust causes adverse health effects. Meanwhile, the impact of renewable diesel exhaust, such as hydrotreated vegetable oil (HVO), on human health is less known. Nineteen healthy volunteers were exposed to HVO exhaust for 3 h in a chamber with a double-blind, randomized setup. Exposure scenarios comprised of HVO exhaust from two modern non-road vehicles with 1) no aftertreatment system ('HVOPM+NOx' PM1: 93 µg m-3, EC: 54 µg m-3, NO: 3.4 ppm, NO2: 0.6 ppm), 2) an aftertreatment system containing a diesel oxidation catalyst and a diesel particulate filter ('HVONOx' PM1: ~ 1 µg m-3, NO: 2.0 ppm, NO2: 0.7 ppm) and 3) filtered air (FA) as control. The exposure concentrations were in line with current EU occupational exposure limits (OELs) of NO, NO2, formaldehyde, polycyclic aromatic hydrocarbons (PAHs), and the future OEL (2023) of elemental carbon (EC). The effect on nasal patency, pulmonary function, and self-rated symptoms were assessed. Calculated predicted lung deposition of HVO exhaust particles was compared to data from an earlier diesel exhaust study. RESULTS: The average total respiratory tract deposition of PM1 during HVOPM+NOx was 27 µg h-1. The estimated deposition fraction of HVO PM1 was 40-50% higher compared to diesel exhaust PM1 from an older vehicle (earlier study), due to smaller particle sizes of the HVOPM+NOx exhaust. Compared to FA, exposure to HVOPM+NOx and HVONOx caused higher incidence of self-reported symptoms (78%, 63%, respectively, vs. 28% for FA, p < 0.03). Especially, exposure to HVOPM+NOx showed 40-50% higher eye and throat irritation symptoms. Compared to FA, a decrement in nasal patency was found for the HVONOx exposures (- 18.1, 95% CI: - 27.3 to - 8.8 L min-1, p < 0.001), and for the HVOPM+NOx (- 7.4 (- 15.6 to 0.8) L min-1, p = 0.08). Overall, no clinically significant change was indicated in the pulmonary function tests (spirometry, peak expiratory flow, forced oscillation technique). CONCLUSION: Short-term exposure to HVO exhaust concentrations corresponding to EU OELs for one workday did not cause adverse pulmonary function changes in healthy subjects. However, an increase in self-rated mild irritation symptoms, and mild decrease in nasal patency after both HVO exposures, may indicate irritative effects from exposure to HVO exhaust from modern non-road vehicles, with and without aftertreatment systems.

A quantitative LC-MS method to determine surface contamination of antineoplastic drugs by wipe sampling.

The main objective was to develop a wipe sampling test to measure surface contamination of the most frequently used antineoplastic drugs (ADs) in Swedish healthcare and, furthermore, to develop an analysis method sensitive enough to assess low levels of contamination. Two wipe sampling tests with separate sample processing methods assessing (i) cyclophosphamide (CP), ifosfamide (IF), 5-fluorouracil (5-FU), etoposide (ETO), gemcitabine (GEM) and cytarabine (CYT) (Wipe Test 1); and (ii) GEM, CYT and methotrexate (MTX) (Wipe Test 2), respectively, were developed by optimization of absorption and extraction efficiencies using different wipe tissue materials, tissue wetting solution, and extraction solvents. A fast liquid chromatography tandem mass spectrometry method was developed for simultaneous detection of the studied ADs. The limit of quantification for the method was between 0.04 to 2.4 ng/wipe sample (0.10 to 6.1 pg/cm2 for an area of 400 cm2) and at 50 ng/sample the within-day precision was between 1.3 and 15%, and the accuracy between 102 and 127%. Wipe Test 1 was applied in an assessment of cleaning efficiency of five different cleaning solutions (formic acid, water, sodium hydroxide, ethanol, and sodium dodecyl sulfate (SDS) for removal of ADs from surfaces made of stainless steel or plastic. For CP, IF, 5-FU, GEM, and CYT 92% of the AD were removed regardless of surface and cleaning solution. In conclusion, a user-friendly assessment method to measure low levels of seven ADs in the work environment was developed and validated. Assessment of the decontamination efficiency of cleaning solutions concerning removal of ADs from stainless steel showed that efficiencies differed depending on the AD with water being the least effective cleaning agent. The results suggests that a combination of different cleaning agents including detergent and a solution with an organic component would be optimal to efficiently remove the measured ADs from surfaces in the workplace.

Comprehensive proteome analysis of nasal lavage samples after controlled exposure to welding nanoparticles shows an induced acute phase and a nuclear receptor, LXR/RXR, activation that influence the status of the extracellular matrix.

BACKGROUND: Epidemiological studies have shown that many welders experience respiratory symptoms. During the welding process a large number of airborne nanosized particles are generated, which might be inhaled and deposited in the respiratory tract. Knowledge of the underlying mechanisms behind observed symptoms is still partly lacking, although inflammation is suggested to play a central role. The aim of this study was to investigate the effects of welding fume particle exposure on the proteome expression level in welders suffering from respiratory symptoms, and changes in protein mediators in nasal lavage samples were analyzed. Such mediators will be helpful to clarify the pathomechanisms behind welding fume particle-induced effects. METHODS: In an exposure chamber, 11 welders with work-related symptoms in the lower airways during the last month were exposed to mild-steel welding fume particles (1 mg/m3) and to filtered air, respectively, in a double-blind manner. Nasal lavage samples were collected before, immediately after, and the day after exposure. The proteins in the nasal lavage were analyzed with two different mass spectrometry approaches, label-free discovery shotgun LC-MS/MS and a targeted selected reaction monitoring LC-MS/MS analyzing 130 proteins and four in vivo peptide degradation products. RESULTS: The analysis revealed 30 significantly changed proteins that were associated with two main pathways; activation of acute phase response signaling and activation of LXR/RXR, which is a nuclear receptor family involved in lipid signaling. Connective tissue proteins and proteins controlling the degradation of such tissues, including two different matrix metalloprotease proteins, MMP8 and MMP9, were among the significantly changed enzymes and were identified as important key players in the pathways. CONCLUSION: Exposure to mild-steel welding fume particles causes measurable changes on the proteome level in nasal lavage matrix in exposed welders, although no clinical symptoms were manifested. The results suggested that the exposure causes an immediate effect on the proteome level involving acute phase proteins and mediators regulating lipid signaling. Proteases involved in maintaining the balance between the formation and degradation of extracellular matrix proteins are important key proteins in the induced effects.

Exposure, respiratory symptoms, lung function and inflammation response of road-paving asphalt workers.

BACKGROUND: Controversy exists as to the health effects of exposure to asphalt and crumb rubber modified (CRM) asphalt, which contains recycled rubber tyres. OBJECTIVE: To assess exposures and effects on airway symptoms, lung function and inflammation biomarkers in conventional and CRM asphalt road pavers. METHODS: 116 conventional asphalt workers, 51 CRM asphalt workers and 100 controls were investigated. A repeated-measures analysis included 31 workers paving with both types of asphalt. Exposure to dust, nitrosamines, benzothiazole and polycyclic aromatic hydrocarbon (PAH) was measured in worksites. Self-reported symptoms, spirometry test and blood sampling were conducted prework and postwork. Symptoms were further collected during off-season for asphalt paving. RESULTS: Dust, PAHs and nitrosamine exposure was highly varied, without difference between conventional and CRM asphalt workers. Benzothiazole was higher in CRM asphalt workers (p<0.001). Higher proportions of asphalt workers than controls reported eye symptoms with onset in the current job. Decreased lung function from preworking to postworking was found in CRM asphalt workers and controls. Preworking interleukin-8 was higher in CRM asphalt workers than in the controls, followed by a decrement after 4 days of working. No differences in any studied effects were found between conventional and CRM asphalt paving. CONCLUSION: CRM asphalt workers are exposed to higher benzothiazole. Further studies are needed to identify the source of nitrosamines in conventional asphalt. Mild decrease in lung function in CRM asphalt workers and work-related eye symptoms in both asphalt workers were observed. However, our study did not find strong evidence for severe respiratory symptoms and inflammation response among asphalt workers.

Acute respiratory effects and biomarkers of inflammation due to welding-derived nanoparticle aggregates.

PURPOSE: Welders are exposed to airborne particles from the welding environment and often develop symptoms work-related from the airways. A large fraction of the particles from welding are in the nano-size range. In this study we investigate if the welders' airways are affected by exposure to particles derived from gas metal arc welding in mild steel in levels corresponding to a normal welding day. METHOD: In an exposure chamber, 11 welders with and 10 welders without work-related symptoms from the lower airways and 11 non-welders without symptoms, were exposed to welding fumes (1 mg/m3) and to filtered air, respectively, in a double-blind manner. Symptoms from eyes and upper and lower airways and lung function were registered. Blood and nasal lavage (NL) were sampled before, immediately after and the morning after exposure for analysis of markers of oxidative stress. Exhaled breath condensate (EBC) for analysis of leukotriene B4 (LT-B4) was sampled before, during and immediately after exposure. RESULTS: No adverse effects of welding exposure were found regarding symptoms and lung function. However, EBC LT-B4 decreased significantly in all participants after welding exposure compared to filtered air. NL IL-6 increased immediately after exposure in the two non-symptomatic groups and blood neutrophils tended to increase in the symptomatic welder group. The morning after, neutrophils and serum IL-8 had decreased in all three groups after welding exposure. Remarkably, the symptomatic welder group had a tenfold higher level of EBC LT-B4 compared to the two groups without symptoms. CONCLUSION: Despite no clinical adverse effects at welding, changes in inflammatory markers may indicate subclinical effects even at exposure below the present Swedish threshold limit (8 h TWA respirable dust).

Characterization of Hairdresser Exposure to Airborne Particles during Hair Bleaching.

Respiratory symptoms among hairdressers are often ascribed to the use of bleaching powders that contain persulfate salts. Such salts can act as allergens and airway irritants but the mechanisms behind the negative health effects are not fully known. In order to understand why some hairdressers experience respiratory symptoms during, and after, sessions of hair bleaching, it is of importance to characterize how exposure occurs. In this work we used time and particle size resolved instrumentation with the aim to measure the concentration of particles that hairdressers are exposed to during sessions of hair bleaching. We also used filter samples to collect particles for quantitative determination of persulfate (S2O8(2-)) content and for analysis by light microscopy. Two different types of bleaching powders were used, one marked as dust-free and one without this marking (denoted regular). The time resolved instrumentation revealed that particles <10 µm were emitted, specifically when the regular powder was prepared and mixed with hydrogen peroxide. In contrast to other research our work also revealed that supercoarse particles (>10 µm) were emitted during application of the bleaching, when both the regular and the dust-free powders were used. The measured level of persulfate, sampled in the breathing zone of the hairdressers, was on average 26 µg m(-3) when the regular powder was used and 11 µg m(-3) when the dust-free powder was used. This indicates that use of dust-free powder does not eliminate exposure to persulfates, it only lowers the concentration. We show that the site of sampling, or position of the hairdresser with regards to the hair being bleached, is of high importance in the determination of persulfate levels and exposure. This work focuses on the physical and chemical characterization of the particles released to the air and the results are important for accurate exposure assessments. Accurate assessments may in turn lead to a better understanding of why some hairdressers experience respiratory symptoms from hair bleaching sessions.

Targeted proteomic analyses of nasal lavage fluid in persulfate-challenged hairdressers with bleaching powder-associated rhinitis.

Hairdressers have an increased risk for developing airway symptoms, for example, asthma and rhinitis. Persulfates, which are oxidizing agents in bleaching powder, are considered important causal agents for these symptoms. However, the underlying mechanisms are unclear. The aim was therefore to measure proteomic changes in nasal lavage fluid from persulfate-challenged subjects to identify proteins potentially involved in the pathogenesis of bleaching powder-associated rhinitis or candidate effect biomarkers for persulfate. Also, oxidized peptides were measured to evaluate their usefulness as biomarkers for persulfate exposure or effect, for example, oxidative stress. Samples from hairdressers with and without bleaching powder-associated rhinitis were analyzed with liquid chromatography tandem mass spectrometry using selected reaction monitoring to target 246 proteins and five oxidized peptides. Pathway analysis was applied to obtain a functional overview of the proteins. Several proteins involved in biologically meaningful pathways, functions, or disorders, for example, inflammatory responses, oxidative stress, epithelium integrity, and dermatological disorders, changed after the persulfate challenge. A list with nine proteins that appeared to be affected by the persulfate challenge and should be followed up was defined. An albumin peptide containing oxidized tryptophan increased 2 h and 5 h after the challenge but not after 20 min, which indicates that such peptides may be useful as oxidative stress biomarkers.

Inflammatory biomarkers in serum in subjects with and without work related neck/shoulder complaints.

BACKGROUND: Although it has recently been recognised that inflammation is important in the development of work-related musculoskeletal disorders (MSDs), the exact pathophysiological pathways are unknown. METHODS: We investigated serum concentrations of inflammatory cytokines in 35 female supermarket cashiers with repetitive work tasks and work related neck/shoulder complaints, compared with those from 25 women without MSDs (6 supermarket cashiers and 19 middle-school teachers or faculty staff). None of the subjects were pregnant or lactating, and showed no signs of rheumatoid arthritis, systemic lupus erythematosus, cancer, diabetes, coronary artery disease or inadequately controlled hypertension. Serum levels of IL-1α, IL-1ß, IL-6, IL-8, IL-10, IL-12, MCP-1, MIP-1α, MIP-1ß, TNF-α, GM-CSF, CTGF and CRP were analysed. RESULTS: The women with pain related to MSD had higher serum concentrations of MIP-1ß (median, 25th-75th percentile: 90.0 pg/mL, 62.5-110 vs. 73.1 pg/mL, 54.6-88.3; p = 0.018), IL-12 (0.26 pg/mL, 0.26-0.26 vs. 0.26 pg/mL, 0.26-0.26; p = 0.047) and CRP (0.5 mg/L, 0.5-1.6 vs. 0.5 mg/L, 0.5-0.5; p = 0.003), than control subjects. Levels of MIP-1α, MIP-1ß and CRP were correlated with the reported intensity of neck/shoulder pain (r = 0.29, p = 0.03 for MIP-1α; r = 0.29, p = 0.02 for MIP-1ß and r = 0.43, p = 0.001 for CRP). No statistically significant differences in serum levels were found for the remaining cytokines. CONCLUSIONS: Otherwise healthy females with ongoing work-related neck/shoulder pain showed higher serum concentrations of MIP-1ß, IL-12 and CRP than controls, and the levels of MIP-1α, MIP-1ß and CRP were correlated to pain intensity. These results support previous findings that inflammatory processes play a part in work related MSDs.

Serum levels of biomarkers related to severity staging of Raynaud's phenomenon, neurosensory manifestations, and vibration exposure in patients with hand-arm vibration injury.

Our aim was to explore possible relationships between serum levels of biomarkers in patients with hand-arm vibration injury in relation to the severity of the vascular, i.e., Raynaud's phenomenon (RP), and neurosensory manifestations, the current exposure level, and the duration of exposure. This study was of case series design and involved 92 patients diagnosed with hand-arm vibration injury. Jonckheere's trend test was used to assess any association between serum levels of biomarkers and RP as well as neurosensory manifestations, graded by the International Consensus Criteria. Generalized linear models with adjustment for possible confounders were also used for associations between serum levels of biomarkers and; (1) severity of RP recorded as the extent of finger blanching calculated with Griffin score, (2) vibration perception thresholds, (3) magnitude of current exposure as [A(8); (m/s2)] value, and (4) the duration of exposure in years. Serum levels of thrombomodulin, von Willebrand factor, calcitonin gene related peptide (CGRP), heat shock protein 27, and caspase-3 were positively associated with severity of RP. Serum levels of CGRP were positively associated with the neurosensory component. No associations with exposure were shown for these biomarkers. For Intercellular adhesion molecule 1 and monocyte chemoattractant protein 1, no associations were found with neither severity nor exposure. Levels of serum biomarkers associated with endothelial injury or dysfunction, inflammation, vasodilation, neuroprotection, and apoptosis were positively associated with the severity of hand-arm vibration injury.

Serum biomarkers in patients with hand-arm vibration injury and in controls.

Hand-arm vibration injury is a well-known occupational disorder that affects many workers globally. The diagnosis is based mainly on quantitative psychophysical tests and medical history. Typical manifestations of hand-arm vibration injury entail episodes of finger blanching, Raynaud's phenomenon (RP) and sensorineural symptoms from affected nerve fibres and mechanoreceptors in the skin. Differences in serum levels of 17 different biomarkers between 92 patients with hand-arm vibration injury and 51 controls were analysed. Patients with hand-arm vibration injury entailing RP and sensorineural manifestations showed elevated levels of biomarkers associated with endothelial injury or dysfunction, inflammation, vaso- or neuroprotective compensatory, or apoptotic mechanisms: intercellular adhesion molecule-1 (ICAM-1), monocyte chemoattractant protein-1 (MCP-1); thrombomodulin (TM), heat shock protein 27 (HSP27); von Willebrand factor, calcitonin gene-related peptide (CGRP) and caspase-3. This study adds important knowledge on pathophysiological mechanisms that can contribute to the implementation of a more objective method for diagnosis of hand-arm vibration injury.

Characterization of airborne dust emissions from three types of crushed multi-walled carbon nanotube-enhanced concretes.

Dispersing Multi-Walled Carbon Nanotubes (MWCNTs) into concrete at low (<1 wt% in cement) concentrations may improve concrete performance and properties and provide enhanced functionalities. When MWCNT-enhanced concrete is fragmented during remodelling or demolition, the stiff, fibrous and carcinogenic MWCNTs will, however, also be part of the respirable particulate matter released in the process. Consequently, systematic aerosolizing of crushed MWCNT-enhanced concretes in a controlled environment and measuring the properties of this aerosol can give valuable insights into the characteristics of the emissions such as concentrations, size range and morphology. These properties impact to which extent the emissions can be inhaled as well as where they are expected to deposit in the lung, which is critical to assess whether these materials might constitute a future health risk for construction and demolition workers. In this work, the impact from MWCNTs on aerosol characteristics was assessed for samples of three concrete types with various amounts of MWCNT, using a novel methodology based on the continuous drop method. MWCNT-enhanced concretes were crushed, aerosolized and the emitted particles were characterized with online and offline techniques. For light-weight porous concrete, the addition of MWCNT significantly reduced the respirable mass fraction (RESP) and particle number concentrations (PNC) across all size ranges (7 nm - 20 µm), indicating that MWCNTs dampened the fragmentation process by possibly reinforcing the microstructure of brittle concrete. For normal concrete, the opposite could be seen, where MWCNTs resulted in drastic increases in RESP and PNC, suggesting that the MWCNTs may be acting as defects in the concrete matrix, thus enhancing the fragmentation process. For the high strength concrete, the fragmentation decreased at the lowest MWCNT concentration, but increased again for the highest MWCNT concentration. All tested concrete types emitted <100 nm particles, regardless of CNT content. SEM imaging displayed CNTs protruding from concrete fragments, but no free fibres were detected.

Screening method using selected reaction monitoring for targeted proteomics studies of nasal lavage fluid.

Proteomic-based studies of nasal lavage fluid (NLF) may identify molecular pathways associated with disease pathology and new biomarker candidates of upper airway diseases. However, most studies have used rather tedious untargeted MS techniques. Selected reaction monitoring (SRM) is a sensitive and specific technique that can be used with high throughput. In this study, we developed a semiquantitative SRM-based method targeting 244 NLF proteins. The protein set was identified through a literature study in combination with untargeted LC-MS/MS analyses of trypsin-digested NLF samples. The SRM assays were designed using MS/MS data either downloaded from a proteomic data repository or experimentally obtained. Each protein is represented by one to five peptides, resulting in 708 SRM assays. Three to four transitions per assay were used to ensure analyte specificity. The majority (69%) of the assays showed good within-day precision (coefficient of variation ≤ 20%). The accuracy of the method was evaluated by analyzing four samples prepared with varying amounts of four proteins. Peptide and protein ratios were in good agreement with expected ratios. In conclusion, a high throughput screening method for relative quantification of 244 NLF proteins was developed. The method should be of general use in any proteomic study of the upper airways.

Effects of diesel exposure on lung function and inflammation biomarkers from airway and peripheral blood of healthy volunteers in a chamber study.

BACKGROUND: Exposure to diesel exhaust causes inflammatory responses. Previous controlled exposure studies at a concentration of 300 µg/m(3) of diesel exhaust particles mainly lasted for 1 h. We prolonged the exposure period and investigated how quickly diesel exhaust can induce respiratory and systemic effects. METHODS: Eighteen healthy volunteers were exposed twice to diluted diesel exhaust (PM1 ~300 µg/m(3)) and twice to filtered air (PM1 ~2 µg/m(3)) for 3 h, seated, in a chamber with a double-blind set-up. Immediately before and after exposure, we performed a medical examination, spirometry, rhinometry, nasal lavage and blood sampling. Nasal lavage and blood samples were collected again 20 h post-exposure. Symptom scores and peak expiratory flow (PEF) were assessed before exposure, and at 15, 75, and 135 min of exposure. RESULTS: Self-rated throat irritation was higher during diesel exhaust than filtered air exposure. Clinical signs of irritation in the upper airways were also significantly more common after diesel exhaust exposure (odds ratio = 3.2, p<0.01). PEF increased during filtered air, but decreased during diesel exhaust exposure, with a statistically significant difference at 75 min (+4 L/min vs. -10 L/min, p = 0.005). Monocyte and total leukocyte counts in peripheral blood were higher after exposure to diesel exhaust than filtered air 20 h post-exposure, and a trend (p = 0.07) towards increased serum IL-6 concentrations was also observed 20 h post-exposure. CONCLUSIONS: Diesel exhaust induced acute adverse effects such as symptoms and signs of irritation, decreased PEF, inflammatory markers in healthy volunteers. The effects were first seen at 75 min of exposure.

Compositional tuning of gas-phase synthesized Pd-Cu nanoparticles.

Bimetallic nanoparticles have gained significant attention in catalysis as potential alternatives to expensive catalysts based on noble metals. In this study, we investigate the compositional tuning of Pd-Cu bimetallic nanoparticles using a physical synthesis method called spark ablation. By utilizing pure and alloyed electrodes in different configurations, we demonstrate the ability to tailor the chemical composition of nanoparticles within the range of approximately 80 : 20 at% to 40 : 60 at% (Pd : Cu), measured using X-ray fluorescence (XRF) and transmission electron microscopy energy dispersive X-ray spectroscopy (TEM-EDXS). Time-resolved XRF measurements revealed a shift in composition throughout the ablation process, potentially influenced by material transfer between electrodes. Powder X-ray diffraction confirmed the predominantly fcc phase of the nanoparticles while high-resolution TEM and scanning TEM-EDXS confirmed the mixing of Pd and Cu within individual nanoparticles. X-ray photoelectron and absorption spectroscopy were used to analyze the outermost atomic layers of the nanoparticles, which is highly important for catalytic applications. Such comprehensive analyses offer insights into the formation and structure of bimetallic nanoparticles and pave the way for the development of efficient and affordable catalysts for various applications.

Sensitive methods for assessment of lung health in welders and controls.

BACKGROUND: Welders are exposed to gas and particle emissions that can cause severe lung disease, such as chronic obstructive pulmonary disease (COPD), a leading cause of mortality and morbidity worldwide. It is difficult to detect COPD early and therefore mitigating measures may be delayed. The aim of this study was to investigate lung health in welders and evaluate new sensitive methods with potential to assess early onset pulmonary changes in occupational settings. METHODS: This study assessed the lung health and symptoms in active welders (n = 28) and controls (n = 17). Lung measurements were performed with standard spirometry and new methods: airspace dimension assessment (AiDA), oscillometry, blood serum biomarkers (club cell secretory protein 16, surfactant protein D, matrix metalloproteinases, fibroblast, hepatocyte growth factor, interleukins), and one urine biomarker (desmosine). RESULTS: According to spirometry measurements, all participants had normal lung function. However, prevalence of cough was significantly higher among welders compared with controls and lung changes were found in welders with the novel methods. Welders had significantly higher respiratory system resistance assessed with oscillometry, serum levels of metalloproteinases 9 and hepatocyte growth factor, compared with controls. Airspace dimensions were on average higher among welders compared with controls, but the difference was not significant. The number of welding years correlated with decreased respiratory system reactance and increased serum levels of matrix metalloproteinases 9, interleukin 6, and hepatocyte growth factor. Airspace dimension assessment indices were correlated with increasing levels of inflammatory markers and matrix metalloproteinases. CONCLUSIONS: This study indicated the potential to use new and more sensitive methods for identification of changes in lungs when standard spirometry failed to do so.

Uncovering the cytotoxic effects of air pollution with multi-modal imaging of in vitro respiratory models.

Annually, an estimated seven million deaths are linked to exposure to airborne pollutants. Despite extensive epidemiological evidence supporting clear associations between poor air quality and a range of short- and long-term health effects, there are considerable gaps in our understanding of the specific mechanisms by which pollutant exposure induces adverse biological responses at the cellular and tissue levels. The development of more complex, predictive, in vitro respiratory models, including two- and three-dimensional cell cultures, spheroids, organoids and tissue cultures, along with more realistic aerosol exposure systems, offers new opportunities to investigate the cytotoxic effects of airborne particulates under controlled laboratory conditions. Parallel advances in high-resolution microscopy have resulted in a range of in vitro imaging tools capable of visualizing and analysing biological systems across unprecedented scales of length, time and complexity. This article considers state-of-the-art in vitro respiratory models and aerosol exposure systems and how they can be interrogated using high-resolution microscopy techniques to investigate cell-pollutant interactions, from the uptake and trafficking of particles to structural and functional modification of subcellular organelles and cells. These data can provide a mechanistic basis from which to advance our understanding of the health effects of airborne particulate pollution and develop improved mitigation measures.

Size-resolved characterization of particles >10 nm emitted to air during metal recycling.

BACKGROUND: In the strive towards a circular economy, metal waste recycling is a growing industry. During the recycling process, particulate matter containing toxic and allergenic metals will be emitted to the air causing unintentional exposure to humans and environment. OBJECTIVE: In this study detailed characterization of particle emissions and workplace exposures were performed, covering the full size range from 10 nm to 10 µm, during recycling of three different material flows: Waste of electrical and electronic equipment (WEEE), metal scrap, and cables. METHODS: Both direct-reading instruments (minute resolution), and time-integrated filter measurements for gravimetric and chemical analysis were used. Additionally, optical sensors were applied and evaluated for long-term online monitoring of air quality in industrial settings. RESULTS: The highest concentrations, in all particle sizes, and with respect both to particle mass and number, were measured in the WEEE flow, followed by the metal scrap flow. The number fraction of nanoparticles was high for all material flows (0.66-0.86). The most abundant metals were Fe, Al, Zn, Pb and Cu. Other elements of toxicological interest were Mn, Ba and Co. SIGNIFICANCE: The large fraction of nanoparticles, and the fact that their chemical composition deviate from that of the coarse particles, raises questions that needs to be further addressed including toxicological implications, both for humans and for the environment.