Effect of sequential burr passes on osteotomy magnitude and calcaneal morphology in minimally invasive Zadek osteotomy.

PURPOSE: This study aimed to evaluate the impact of each burr pass on degree of correction, gap size and calcaneal morphology in MIS Zadek osteotomy. METHODS: MIS Zadek osteotomy was performed on ten cadaveric specimens using a 3.1 mm Shannon burr. After each burr pass, the osteotomy gap was manually closed, and the subsequent burr passes were carried out with the foot held in dorsiflexion, which was repeated five times. Lateral X-rays were taken before and after each burr pass. Two independent reviewers measured the dorsal calcaneal length after each burr passage, as well as changes in several calcaneal parameters including X/Y ratio, Fowler Philip angle, and Böhler angle. RESULTS: The average decrease in dorsal calcaneal cortical length with each burr pass was as follows: 2.6 ± 0.9 mm at the 1st pass, 2.4 ± 1 mm at the 2nd pass, 2 ± 1 mm at the 3rd pass, 1.6 ± 1 mm at the 4th pass, and 1.4 ± 0.7 mm at the 5th pass. The Fowler Philip and Böhler angles consistently decreased while the X/Y ratio consistently increased following each consecutive burr pass. Interobserver reliability analysis demonstrated good agreement for all parameters. CONCLUSION: The results revealed the trends of length and anatomical changes in the calcaneus with each burr pass. On average, a dorsal wedge resection of 10 mm was achieved after 5 burr passes. This data can aid surgeons in determining the optimal number of burr passes required for a particular amount of resection, ensuring the attainment of the desired patient-specific surgical outcome.

Comparison between achilles tendon reinsertion and dorsal closing wedge calcaneal osteotomy for the treatment of insertional achilles tendinopathy: A meta-analysis.

BACKGROUND: The debridement and Achilles tendon reinsertion (DATR) have been the most common surgical approach for the treatment of Insertional Achilles Tendinopathy (IAT), while dorsal closing wedge calcaneal osteotomy (DCWCO) has recently gained popularity as an alternative surgical option. This study aimed to systematically review the published literature on both surgical techniques and compare their clinical outcomes and complication rates. METHODS: A systematic review was performed according to the PRISMA guidelines using Medline, Embase, and Scopus databases. The inclusion criteria encompassed clinical studies reporting functional outcomes and complications, with a minimum of 10 patients and at least 12 months of follow-up. RESULTS: Seven studies (n = 169) were included for the analysis of DATR, and eight studies (n = 227) were included for the analysis of open DCWCO. Both groups showed a similar improvement in AOFAS score. The overall complication rates were 16.6% in the DATR group and 9.2% in the DCWCO group, but the difference was not statistically significant. However, there was a significantly higher incidence of wound complications in the DATR group (10.1%, 95% C.I.: 4.7-15.6) compared to the DCWCO group (2.5%, 95% C.I.: 0.6-4.4) as the confidence intervals did not overlap. CONCLUSIONS: Clinical outcomes and overall complication rates of both techniques were comparable, although DCWCO had a lower incidence of wound complications. Further research should be focused on prospective studies comparing the two techniques to corroborate the current findings. LEVEL OF EVIDENCE: Level IV; meta-analysis.

Effect of sequential burr passes on minimally invasive akin and first metatarsal dorsiflexion osteotomies.

BACKGROUND: Minimally invasive surgical (MIS) osteotomies are increasing as a surgical option for treating midfoot and forefoot conditions. This study aimed to evaluate the impact of each burr pass on the degree of correction, gap size, and alignment in MIS Akin and first metatarsal dorsiflexion osteotomies (DFO). METHODS: MIS Akin and first metatarsal DFO were performed on ten cadaveric specimens. Fluoroscopic measurements included the metatarsal dorsiflexion angle (MDA), dorsal cortical length (MDCL), first phalangeal medial cortical length (PCML) and proximal to distal phalangeal articular angle (PDPAA). RESULTS: The average decrease in PCML with each burr pass was as follows: 1.53, 1.33, 1.27, 1.23 and 1.13 mm at the 1st to 5th pass, respectively. The MDCL sequentially decreased by 1.80, 1.59, 1.35, 0.75, and 0.60 mm. The MDA consistently decreased, and the PDPAA incrementally became more valgus oriented. CONCLUSION: On average, a first metatarsal dorsal wedge resection of 4.7 mm and first phalangeal medial wedge resection of 2.9 mm was achieved after 3 and 2 burr passes, respectively. This data may aid surgeons determine the optimal number of burr passes required to achieve the desired patient-specific surgical correction.

Cortices of Fibula and Tibia Can Provide Landmarks for Accurate Syndesmosis Fixation Angle: Computed Tomography Validation of Angle Bisector Method.

Anatomic syndesmosis reduction is necessary to restore ankle biomechanics and prevent poor clinical outcomes, but malreduction can be encountered frequently since the ideal fixation angle varies between patients and fixation levels. This study aimed to validate the angle bisector method to reveal whether it provides an accurate syndesmotic fixation angle that is patient- and level-specific. Lower extremity CT angiography of 50 consecutive patients (25 male, 25 female) without evident ankle pathology were evaluated. The average age was 52.8 (±18, range: 18-75). Lines tangent to anterior and posterior cortices of tibia and fibula were drawn in the axial plane at both 2 cm and 3.5 cm above the ankle joint line. Bisection of the angle formed between these lines was drawn and its relationship with the centroidal axis, which is proposed to be the ideal syndesmotic axis, was evaluated. The angle between the bisector line & the centroidal axis and the distance between their most lateral intersections with the fibula were calculated. The measurements were made by 3 blinded observers. Intra- and interobserver reliability analyses were conducted. The average centroidal axis-bisector angle was 2.1° ± 2.1° at 2 cm and 0.6° ± 1.3° at 3.5 cm level. The average distance to the actual syndesmosis entry point was 1.0 ± 0.9 mm at 2 cm and 0.4 ± 0.4 mm at 3.5 cm level. The values didn't show any significant difference according to gender. Intra- and interobserver reliability analysis showed excellent correlation in all parameters (interclass correlation coefficient > 0.90). Angle bisector method was found strongly reliable providing accurate direction for syndesmotic axis. It can provide a patient- and level-specific angle for the application of syndesmotic implants without increasing the fluoroscopy exposure. Its use can have a broad impact on functional outcomes of ankle injuries by decreasing the malreduction rates. Further cadaveric validation and safety studies should be conducted for possible clinical usage.

Angle bisector method to determine the accurate angle for tibiofibular syndesmotic fixation: A validation study with 3D-printed anatomical models.

PURPOSE: This study aimed to validate the angle bisector method on 3D-printed ankle models to reveal whether it aids in placing syndesmotic screws at an accurate trajectory that is patient- and level-specific and also not surgeon-dependent. METHODS: DICOM data of 16 ankles were used to create 3D anatomical models. Then the models were printed in their original size and two trauma surgeons performed the syndesmotic fixations with the angle bisector method at 2 cm and 3.5 cm proximal to joint space. Afterward, the models were sectioned to reveal the trajectory of the screws. The photos of the axial sections were processed in a software to determine the centroidal axis which is defined as true syndesmotic axis and analyze its relationship with the screws inserted. The angle between the centroidal axis and syndesmotic screw was measured by two-blinded observers 2 times with 2 weeks interval. RESULTS: The average angle between the centroidal axis and screw trajectory was 2.4° ± 2° at 2 cm-level and 1.3° ± 1.5° at 3.5 cm-level, indicating a reliable direction with minimal differences at both levels. The average distance between fibular entry points of the centroidal axis and screw trajectory was less than 1 mm at both levels indicating that the angle bisector method can provide an excellent entry point from fibula for syndesmotic fixation. The inter- & intra-observer consistencies were excellent with all ICC values above 0.90. CONCLUSION: The angle bisector method provided an accurate syndesmotic axis for implant placement which is patient- & level-specific and not surgeon-dependent, in 3D-printed anatomical ankle models.

Middle-sized posterior malleolus fractures: Fixed versus non-fixed - A prospective randomized study.

PURPOSE: This study aimed to assess the impact of fixation on functional and radiological outcomes of ankle fractures involving the posterior malleolus. We hypothesized that fixation of the posterior malleolus would be associated with improved radiological and functional outcome. METHODS: A prospective randomized controlled study was planned and 40 consecutive ankle fractures involving middle-sized (10-25%) posterior fragment were included. Posterior fragments in Group 1 were not fixated while Group 2 underwent posterior malleolus fixation. The patients were evaluated both functionally and radiologically at minimum 2-years. RESULTS: Demographics and fracture type distributions were similar between the groups. Despite the slightly better functional outcome in Group 2, no significant functional or radiological outcome difference could be detected. Articular step-off> 1 mm was more common in Group 1 (p = 0.04) and the patients with articular step-off showed significantly worse functional outcome in all functional parameters (p < 0.05). Radiological and functional outcome parameters were positively correlated when all patients were evaluated together. Lateral radiographs caused an overestimation in the size of posterior fragment compared to CT (p < 0.001). CONCLUSION: Although there was a slightly better clinical outcome in patients with fixed posterior fragments, it was not significant at short to mid-term follow-up. However, posterior fragment fixation contributed to functional outcomes by decreasing the incidence of articular step-off> 1 mm, which was found to be a negative prognostic factor. LEVEL OF EVIDENCE: Level I; prospective randomized controlled study.

Characteristics and publication discrepancies of foot & ankle surgery-related clinical trials.

BACKGROUND: Trial registration can provide more reliable study designs, however, the final publications are not exempt from bias. This study aimed to show the characteristics of foot & ankle surgery-related clinical trials registered in ClinicalTrials.gov (CTG) and analyze possible risk factors that can lead to discrepancies between the original trial registry and published results. METHODS: Foot & ankle surgery-related randomized controlled studies registered in CTG with an anticipated completion date until 2018 were extracted. 157 trials were found eligible for final analysis and corresponding publications were investigated through literature databases. Discrepancies between trial registries and published results were analyzed. RESULTS: 67.5% of trials were registered whether during the trial period or after completion. 46.5% were funded by industry. 54.8% of trials were reported to be completed. The results of 66 (42%) trials were published in a journal. There was a sample size discrepancy in 57.6%, follow-up time discrepancy in 28.8%, primary outcome discrepancy in 45.5%, and inclusion/exclusion criteria discrepancy in 89.4% of registries. Sample size, inclusion/exclusion criteria discrepancies were significantly more in trials funded by industry (p = 0.024, 0.001, 0.037, respectively). Industry-funded studies reported positive results more frequently (p = 0.011). CONCLUSION: Only 42% of all registered foot & ankle surgery-related studies had the chance to be published. The majority of studies presented discrepancies in sample size, outcome assessment method, follow-up time, or inclusion/exclusion criteria. Industry-funded studies showed a higher rate of discrepancies and were more inclined towards reporting positive results indicating a risk of bias in assessments. LEVEL OF CLINICAL EVIDENCE: Level 3.

The effect of preoperative radiotherapy on local control and prognosis in high-grade non-metastatic intramedullary osteosarcoma of the extremities.

INTRODUCTION: This study aimed to analyse the effect of preoperative radiotherapy on survival, recurrence and necrosis rates in osteosarcoma patients treated with neoadjuvant chemotherapy and limb-salvage surgery. MATERIALS AND METHODS: Osteosarcoma patients who referred to our clinic from 1998 to 2015 were investigated retrospectively. 141 patients with non-metastatic osteosarcoma of the limb who received neoadjuvant chemotherapy and underwent limb-sparing surgery with or without preoperative radiotherapy were included in the study. 73 patients had neoadjuvant chemotherapy only (CT group), while 68 patients had additional preoperative radiotherapy (CT + RT group). 5-year survival, disease-free survival, limb survival, local recurrence, metastasis, complication and necrosis rates were compared between the two groups. RESULTS: Overall 5-year survival, 5-year disease-free survival, 5-year limb survival rates were 68.5, 64.3, 65.7 for CT group and 72.1, 67.6, 64.7 for CT + RT group, respectively. Preoperative radiotherapy gave similar survival and disease-free survival rates. Limb survival, recurrence and metastasis rates were similar between the groups. The necrosis rate of the lesions was significantly higher in the CT + RT group compared to the CT group. CONCLUSION: Preoperative radiotherapy can provide a higher necrosis rate and may allow the resection of unresectable lesions in the treatment of osteosarcoma. CT + RT provided similar 5-year survival despite the larger tumour size compared to CT group. Due to the higher wound complication rate (8.2% in CT, 23.5% in CT + RT group, p = 0.01), CT + RT should be restricted to the lesions with large size or close proximity to neurovascular structures. LEVEL OF EVIDENCE: Level III; Therapeutic, Retrospective comparative study.

The role of serum D-dimer in the diagnosis of periprosthetic joint infection and timing of reimplantation.

D-dimer is a fibrin degradation product formed by the destruction of the cross-linked fibrin clot by activation of the coagulation system. Many studies have shown that systemic and local infections cause fibrinolytic activities. The purpose of this study was to determine the role of serum D-dimer in the diagnosis of periprosthetic joint infection (PJI) and the timing of reimplantation. The patients who underwent primary and revision knee or hip arthroplasty between July 2018 and May 2019 were prospectively evaluated. All surgeries were performed by the same surgeon. 60 of 71 patients who met our criteria were included in the study, comprising of 27 primary arthroplasties (PA), 21 two-stage septic revision (SR) and 12 aseptic revision (AR). We analyzed D-dimer, C-reactive protein (CRP) and erythrocyte sedimentation rate (ESR) levels. The values of the septic group were evaluated as two groups; Group 1 (before the first stage) and Group 2 (before the second stage) to investigate the role of D-dimer in determining the timing of reimplantation. D-dimer level was significantly higher in the SR group compared to PA and AR groups (p<0.001 and p=0.045). CRP and ESR levels were significantly higher in the SR group compared to PA and AR groups. There was no statistically significant difference between preoperative D-dimer levels of Group 1 and Group 2 (p=0.2). Serum D-dimer level can be used as an easy and inexpensive test to support the diagnosis of PJI. But the D-dimer level is not useful to determine the timing of reimplantation.

Comparison of Trochanteric Slide and Subtrochanteric Shortening Osteotomy in the Treatment of Severe Hip Dysplasia: Mid-Term Clinical Outcomes of Cementless Total Hip Arthroplasty.

BACKGROUND: The aim of this study is to compare clinical results of Crowe type III-IV developmental dysplasia of the hip (DDH) patients who underwent total hip arthroplasty with either trochanteric slide osteotomy (TSO) or subtrochanteric shortening osteotomy (SSO). METHODS: The patients who underwent cementless total hip arthroplasty with femoral shortening osteotomy due to Crowe type III/IV DDH between 2004 and 2014 and completed at least 5 years of follow-up were retrospectively analyzed. The patients were grouped according to the type of shortening osteotomy as either TSO or SSO. Preoperative and postoperative clinical evaluation included Harris Hip Score, Visual Analogue Scale pain, leg length discrepancy, and the presence of Trendelenburg sign. The clinical outcome measures and complication rates were compared in terms of osteotomy type. RESULTS: The TSO group consisted of 34 patients (43 hips) and the SSO group consisted of 40 patients (51 hips). The SSO group (96.1%) had a slightly higher 5-year survival of the implant compared to TSO (93%) without statistical significance (P = .18). No significant difference was detected between the groups in terms of clinical outcomes. Complication rates did not significantly differ between the groups except for the lack of bony union which was significantly higher in TSO (P = .006) but this difference did not transform into clinical significance since 5 of 6 patients who did not have a bony union in the TSO group were symptom-free with a fibrous union. CONCLUSION: TSO and SSO provide similar clinical outcomes at mid-term follow-up in the management of Crowe III-IV DDH by cementless total hip arthroplasty. Both techniques can be used safely depending on the surgeon's preference. LEVEL OF EVIDENCE: Level III, Therapeutic, Case-control study.

Comparison of functional metacarpal splint and ulnar gutter splint in the treatment of fifth metacarpal neck fractures: a prospective comparative study.

BACKGROUND: Fifth metacarpal fractures are the most common fractures of the hand. These fractures are generally treated with conservative methods. The aim of this study was to compare the radiological and clinical outcomes of two conservative treatment methods, functional metacarpal splint(FMS) and ulnar gutter splint(UGS), for the treatment of fifth metacarpal neck fractures. METHODS: A prospective comparative study was designed to assess the conservative treatment of isolated and closed stable fractures of the fifth metacarpal neck. In total, 58 patients were included in the study and were treated with FMS or UGS after fracture reduction in a consecutive order. Angulation, shortening and functional outcome (QuickDASH scores and grip strengths) were evaluated at the 2nd and 6th months. RESULTS: Forty patients returned for follow-up. Twenty-two patients were treated with FMS, and 18 patients were treated with UGS. The average age was 28 years (SD ± 12, range;18-43) in the FMS group and 30 years (SD ± 14, range;18-58) in the UGS group. After reduction, significant correction was achieved in both groups, but the average angulation was lower in the FMS group(16 ± 7) compared with the UGS group (21 ± 8)(p = 0.043). However, this better initial reduction in FMS group(16 ± 7) could not be maintained in the 1st month follow-up (21 ± 5) (p = 0.009). In the FMS group, the improvement in QuickDASH scores between the 2nd and 6th month follow-up was significant (p = 0.003) but not in the UGS group(p = 0.075). When the expected grip strengths were calculated, the FMS group reached the expected strength values at the 2nd month follow-up, whereas the UGS group still exhibited significantly lower grip strength at the 2nd month follow-up(p = 0.008). However, at the end of the 6th month follow-up, both groups exhibited similar reduction, QuickDASH and grip strength values. CONCLUSIONS: In stable 5th metacarpal neck fractures, FMS is adequate to prevent loss of reduction and yields faster improvement in clinical scores with earlier gain of normal grip strength compared with UGS. However, in the long term, both FMS and UGS methods yield similar radiological and clinical outcomes. Patient comfort and compliance may be better with FMS due to less joint restriction, and these findings should be considered when deciding the treatment method. TRIAL REGISTRATION: ISRCTN79534571 The date of registration: 01/04/2019 Type of study/level of evidence: Therapeutic, II.

High Hip Center Reduces the Dynamic Hip Range of Motion and Increases the Hip Load: A Gait Analysis Study in Hip Arthroplasty Patients With Unilateral Developmental Dysplasia.

BACKGROUND: Long-term favorable clinical outcomes of anatomical or high hip center techniques in total hip arthroplasty (THA) are reported in patients with developmental dysplasia of the hip (DDH). However, there is little information about the effect of the hip center location on gait characteristics. The purpose of this study was to compare these surgical techniques with gait analysis, analyze the effect of the hip rotation center location on gait parameters, and discuss the possible problems that may arise. METHODS: A total of 40 patients who underwent THA due to unilateral coxarthrosis secondary to Crowe type III-IV DDH and completed 5 years of follow-up were included in the study. Group 1 included 20 patients who underwent anatomical hip center reconstruction, while group 2 included 20 patients who underwent high hip center reconstruction. Gait analysis was performed, and the groups were compared according to the gait characteristics. RESULTS: The mean temporospatial values were similar between the groups. The extension of the operated side was significantly lower in group 2 (-9.11 ± 8.92) than in group 1 (-1.87 ± 11.51) (P = .04). The mean longitudinal hip joint force was found to be significantly higher in group 2 (8.92 N/kg ± 0.54) than in group 1 (8.16 N/kg ± 0.66) (P = .04). The high hip center technique has been shown to increase the load on the hip and restrict the dynamic range of motion. CONCLUSION: The high hip center technique can decrease the survival of the implant and increase the fall risk as it increases the load on the hip and reduces the dynamic range of motion. The hip center should be reconstructed anatomically when possible in DDH patients who undergo unilateral THA.

Bilateral High Hip Center Provides Gait Parameters Similar to Anatomical Reconstruction: A Gait Analysis Study in Hip Replacement Patients With Bilateral Developmental Dysplasia.

BACKGROUND: Total hip arthroplasty in severe dysplasia is challenging due to diminished periacetabular bone stock and the highly placed femoral head. Although anatomical reconstruction of the hip, with required interventions such as subtrochanteric osteotomy and graft usage, is the main aim of the procedure, good long-term clinical outcomes of the high hip center technique have also been reported. Information regarding the effect of hip center placement on gait characteristics is limited; therefore, the aim of this study is to analyze the differences in gait parameters between the high hip center technique and anatomical reconstruction of the hip. METHODS: Twenty patients (40 hips) with bilateral Crowe type III-IV developmental dysplasia of the hip who underwent bilateral total hip arthroplasty and completed at least 2 years of follow-up were included. Group 1 comprised 10 patients (20 hips) who underwent anatomical hip center reconstruction, while group 2 comprised 10 patients (20 hips) who underwent high hip center reconstruction. The gait characteristics of patients were examined through markers placed in certain anatomical regions, the cameras placed around, and the force plates embedded in the walking platform. RESULTS: There was no significant difference in the gait characteristics according to the location of the hip rotation center. The mean temporospatial, kinematic, and kinetic values were similar between the groups. The most prominent difference was in the peak dynamic hip extension, which was lower in group 2 (-9.71° ± 7.46°) compared to group 1 (-6.80° ± 11.44°), although it was not statistically significant (P = .09). CONCLUSION: The bilateral high hip center technique can provide similar gait characteristics as anatomical reconstruction and may be preferred in particularly difficult cases based on the surgeon's decision.

Midterm treatment results of congenital dislocation of the knee in 14 knees of nine cases.

Patients with congenital dislocation of the knee (CDK) should be promptly treated surgically if conservative measures fail. This study aimed to achieve a better understanding of the diagnosis and management of CDK through sharing our experience and contributing to the existing literature. Nine patients with a total of 14 knees were included in the study. All patients except one were initially treated with gentle manipulation and serial casting. Surgery was performed on patients in whom sufficient joint mobility could not be achieved. Active and passive range of motion of the knees and functional outcome were measured. Of the 14 knees, five were classified as first grade, four as second grade and five as third grade. The mean age of the patients was 4.09 months and the follow-up period was 70 months. The initial mean flexion angle (MFA) was 18.2° (0-90) and the mean extension angle (MEA) was 8.2° (0-15). At the final follow-up, the mean MFA was 109.2° (80-140) and MEA was -2.85° (0 to -10). No patient had instability by the final follow-up. The results were classified as excellent (5 knees), good (5 knees) and moderate (4 knees) according to outcome assessment criteria. The functional outcomes were classified as excellent (7 knees), good (3 knees) and fair (4 knees) according to the functional outcome scoring. Treatment of CDK should be started in the first days of life, and if the desired functional outcome cannot be achieved through conservative treatment, surgical treatment should be planned without delay.

In silico comparative biomechanical analysis of oblique and chevron medial displacement calcaneal osteotomies for pes planus deformity.

BACKGROUND: Medializing displacement calcaneal osteotomy is commonly performed as part of reconstructive surgery for patients with valgus hindfoot and progressive pes planus deformity. Among several types of calcaneal osteotomies, the oblique and Chevron osteotomy patterns have been commonly described in the literature and gained popularity as they are easily reproducible through percutaneous techniques. Currently, there is scarce evidence in the literature on which cut pattern is superior in terms of stability. To investigate the impact of cut pattern and posterior fragment medialization level on foot biomechanics, computational methods are employed. METHODS: Ankle weightbearing computer tomography (CT) scans of seven patients diagnosed with stage II pes planus deformity are segmented and converted into 3D computational models. Oblique and Chevron osteotomy patterns are modeled independently for each patient. The posterior fragments are medially translated by 8-, 10- and 12-mm and subsequently fixated to the anterior calcaneus with two screws. A total of 42 models are exported to finite element software for biomechanical simulations. Among the investigated parameters, the higher stiffness and lower von Mises stress at the osteotomy interface and the screw site are assumed to be precursors of better stability. RESULTS: It is recorded that as the medialization level increases, the stiffness decreases, and overall stresses increase. Also, it is observed that the Chevron cut produces a stiffer construct while the overall stresses are lower, indicating better stability when compared to the oblique cut. The statistical comparisons of the relevant groups that support these trends are found to be significant (p < 0.05). CONCLUSION: Chevron osteotomy showed superior stability compared to the oblique osteotomy while underscoring the negative impact of increased medialization of the posterior fragment. CLINICAL RELEVANCE: Opting for a lower medialization level and implementing the Chevron technique may facilitate union and earlier weightbearing.

Unveiling Syndesmotic Malreduction: A Proof-of-Concept towards Portable Ultrasound Detection.

Objectives: To evaluate the utility and diagnostic performance of portable handheld ultrasound for evaluating fibular rotation at the distal tibiofibular articulation after syndesmotic disruption. Methods: Four above-the-knee cadaveric specimens were included. Syndesmotic disruption was precipitated by transecting the Anterior Inferior Tibiofibular Ligament, Interosseous Ligament, and Posterior Inferior Tibiofibular Ligament. Thereafter, a proximal fibular osteotomy was performed, and three conditions were modeled at the distal syndesmosis: 1) reduced, 2) 5 degree internal rotation malreduction, and 3) 5 degree external rotation malreduction. Two blinded observers performed separate ultrasonographic examinations for each condition at the level of both the anterior and posterior distal tibiofibular articular surfaces. Syndesmotic gap penetrance, defined as the ability of the P-US to generate signal between the distal fibula and tibia at the level of the incisura, was graded positive if the sonographic waves penetrated between the distal tibiofibular joint and negative if no penetrating waves were detected. The accuracy measures of the anterior and posterior gap penetrance were evaluated individually. Results: Our preliminary results showed that posterior gap penetrance showed good performance when detecting either internal or external rotational malreduction of the fibula with very good specificity (87.5%) and PPV (90.0%). On the other hand, the anterior gap penetrance showed limited performance when detecting either form of rotational malreduction. Conclusion: We introduced a novel sign, the "gap penetrance sign", best measured from the posterior ankle, which can accurately detect syndesmotic malreduction using P-US in a manner that does not require specific quantitative measurements and is readily accessible to early P-US users.

Are acromiohumeral distance measurements on conventional radiographs reliable? A prospective study of inter-method agreement with ultrasonography, and assessment of observer variability.

OBJECTIVES: This study aims to investigate the reliability of acromiohumeral distance (AHD) measurements using conventional radiographs and to compare non-standardized and standardized radiographs with intra-/interobserver reliability measurements. PATIENTS AND METHODS: Between February 2021 and January 2022, a total of 110 shoulders of 55 patients (25 males, 30 females; mean age: 49.7±12.6 years; range, 25 to 77 years) were included. Radiographs were taken in four different positions: primarily shoulder anteroposterior (AP), true AP, standardized true AP, and standardized outlet views. The AHD was measured by three orthopedists. A prospective ultrasonography (US) evaluation was performed by an experienced physiatrist, and the relationship between US and radiographic measurements was evaluated. The intra- and interobserver reliability of radiographic measurements was assessed. RESULTS: On the standardized true AP view measurements, all observers showed a moderate to good agreement with US measurements (intraclass correlation coefficients [ICC]: 0.68-0.75). There was no significant difference between the AHD measurements of the senior orthopedist on standardized true AP and outlet views, and the US measurements. The intraobserver agreement of US measurements was excellent (ICC: 0.98, 95% confidence interval [CI]: 0.98-0.99), and the intraobserver agreement level of measurements on radiographs were good to excellent with a wide range of ICC values (ICC: 0.79-0.97). Interobserver reliability was the highest on the standardized outlet view, with an ICC of 0.91 and 0.88 in two measurement times. Interobserver reliability of other measurements were good with ICC values ranging from 0.82 to 0.88. CONCLUSION: The AHD measurements on radiographs are compatible with US measurements within up to 2 mm difference if standardization is ensured. Also, measurements on standardized views have a superior consistency with lower standard error of measurement and minimal detectable change values. Therefore, we recommend using standardized true shoulder AP and standardized outlet radiographs in clinical practice and studies, as these are the most accurate in demonstrating true AHD.