Optimal Treatment of Tumor in Upper Human Respiratory Tract Using Microaerosols.

Lung cancer is a frequently diagnosed respiratory disease caused by particulate matter in the environment, especially among older individuals. For its effective treatment, a promising approach involves administering drug particles through the inhalation route. Multiple studies have investigated the flow behavior of inhaled particles in the respiratory airways of healthy patients. However, the existing literature lacks studies on the precise understanding of the transportation and deposition (TD) of inhaled particles through age-specific, unhealthy respiratory tracts containing a tumor, which can potentially optimize lung cancer treatment. This study aims to investigate the TD of inhaled drug particles within a tumorous, age-specific human respiratory tract. The computational model reports that drug particles within the size range of 5-10 µm are inclined to deposit more on the tumor located in the upper airways of a 70-year-old lung. Conversely, for individuals aged 50 and 60 years, an optimal particle size range for achieving the highest degree of particle deposition onto upper airway tumor falls within the 11-20 µm range. Flow disturbances are found to be at a maximum in the airway downstream of the tumor. Additionally, the impact of varying inhalation flow rates on particle TD is examined. The obtained patterns of airflow distribution and deposition efficiency on the tumor wall for different ages and tumor locations in the upper tracheobronchial airways would be beneficial for developing an efficient and targeted drug delivery system.

A Low-Cost Device for Measurement of Exhaled Breath for the Detection of Obstructive Lung Disease.

Breath sensor technology can be used in medical diagnostics. This study aimed to build a device to measure the level of hydrogen sulfide, ammonia, acetone and alcohol in exhaled breath of patients as well as healthy individuals. The purpose was to determine the efficacy of these gases for detection of obstructive lung disease. This study was conducted on a total of 105 subjects, where 60 subjects were patients of obstructive lung disease and 45 subjects were healthy individuals. Patients were screened by means of the Pulmonary Function Test (PFT) by a pulmonologist. The gases present in the exhaled breath of all subjects were measured. The level of ammonia (32.29 ± 20.83 ppb), (68.83 ± 35.25 ppb), hydrogen sulfide (0.50 ± 0.26 ppm), (62.71 ± 22.20 ppb), and acetone (103.49 ± 35.01 ppb), (0.66 ± 0.31 ppm) in exhaled breath were significantly different (p < 0.05) between obstructive lung disease patients and healthy individuals, except alcohol, with a p-value greater than 0.05. Positive correlation was found between ammonia w.r.t Forced Expiratory Volume in 1 s (FEV1) (r = 0.74), Forced Vital Capacity (FVC) (r = 0.61) and Forced Expiratory Flow (FEF) (r = 0.63) and hydrogen sulfide w.r.t FEV1 (r = 0.54), FVC (r = 0.41) and FEF (r = 0.37). Whereas, weak correlation was found for acetone and alcohol w.r.t FEV1, FVC and PEF. Therefore, the level of ammonia and hydrogen sulfide are useful breath markers for detection of obstructive lung disease.

Numerical investigation of the effect of spanwise length and mesh density on flow around cylinder at Re = 3900 using LES model.

Flow around circular cylinder has been extensively studied by researchers for several decades due to its wide range of engineering applications such as in heat exchangers, marine cables, high rise building, chimneys, and offshore structures. The lack of clear understanding of the unsteady flow dynamics in the wake of circular cylinder and high computational cost are still an area of high interest amongst the researchers. The aim of the current study is to investigate the effect of variation in spanwise length and grid resolution in the spanwise direction on the recirculation length, separation angle of wake flow by performing large eddy simulations (LES). This study is an extension to previous work by Khan, NB et al, 2019 in which the spanwise length is restricted to 4D only. In current study, the spanwise length is changed from 0.5D to 8D where D is diameter of cylinder and mesh resolution in the spanwise direction is changed from 1 to 80 elements in the present study. The recirculation length, separation angle and wake characteristics are analyzed in detail. It is concluded that after getting optimize spanwise length, mesh resolution in the spanwise direction is the only parameter contributing toward better result.

Seismic isolation retrofitting solution for an existing steel cable-stayed bridge.

This paper investigated the seismic retrofitting of an existing cable-stayed bridge through the use of a seismic isolation system. The bridge is situated in a high seismic zone. During the Saguenay earthquake 1988, one of the anchorage plates of the bridge supports failed. Herein, several configurations of seismic isolation system were considered to identify an appropriate solution for the seismic retrofitting of the bridge in both the longitudinal and transverse directions. A three-dimensional model of the bridge was created, and its seismic behavior studied through nonlinear dynamic time-history analysis. The comparative performance study among the five retrofitting configurations showed that the partial seismic isolation of the bridge led to an enhancement of the seismic response of the bridge in one direction only. However, the overall seismic response of the cable-stayed bridge substantially improved in the longitudinal and transverse directions in cases where the isolation systems were utilized between the supports and the deck-tower connection of the bridge.

Numerical investigation of the vortex-induced vibration of an elastically mounted circular cylinder at high Reynolds number (Re = 104) and low mass ratio using the RANS code.

This study numerically investigates the vortex-induced vibration (VIV) of an elastically mounted rigid cylinder by using Reynolds-averaged Navier-Stokes (RANS) equations with computational fluid dynamic (CFD) tools. CFD analysis is performed for a fixed-cylinder case with Reynolds number (Re) = 104 and for a cylinder that is free to oscillate in the transverse direction and possesses a low mass-damping ratio and Re = 104. Previously, similar studies have been performed with 3-dimensional and comparatively expensive turbulent models. In the current study, the capability and accuracy of the RANS model are validated, and the results of this model are compared with those of detached eddy simulation, direct numerical simulation, and large eddy simulation models. All three response branches and the maximum amplitude are well captured. The 2-dimensional case with the RANS shear-stress transport k-w model, which involves minimal computational cost, is reliable and appropriate for analyzing the characteristics of VIV.