Effectiveness of a dispatcher-assisted CPR using an animated image: Simulation study.

INTRODUCTION: Considering the few studies evaluating bystander cardiopulmonary resuscitation (CPR) performance, we sought to analyze differences in bystander CPR performance with and without the use of our self-developed animated GIFs based on dispatcher-assisted CPR simulation. METHODS: A total of 80 adults who had not received CPR training over the past two years participated in the study. Among them, 40 people were classified into the auditory group (receiving CPR instructions only over the phone), and the other 40 people were classified into the audiovisual group (receiving CPR instructions over the phone after receiving images on a smartphone). All participants were asked to perform adult and infant CPR for 2 min. CPR performance was recorded using two video cameras (front and side) and analyzed by two emergency physicians, whereas CPR quality was measured using Resusci Anne & Baby QCPR Mk II (Laerdal). RESULTS: In the adult CPR study, the audiovisual group had higher performance scores for adequacy of "knee position," "hand posture," "elbow extension," and "vertical compression," as well as higher Standard Posture Completeness and Instruction Performance scores (p < 0.001). No significant difference in CPR quality was observed between the two groups. In the infant CPR study, audiovisual group had higher performance scores in adequacy of "compression site," "finger posture," and "vertical compression," as well as higher Standard Posture Completeness and Instruction Performance scores (p < 0.001). Regarding CPR quality, the audiovisual group had higher scores for "adequate compression rate ratio" (p = 0.047). CONCLUSION: Audiovisual guidance using animated GIFs more effectively improved CPR Standard Posture Completeness and Instruction Performance than did traditional auditory guidance.

An Enhanced Indoor Three-Dimensional Localization System with Sensor Fusion Based on Ultra-Wideband Ranging and Dual Barometer Altimetry.

Accurate three-dimensional (3D) localization within indoor environments is crucial for enhancing item-based application services, yet current systems often struggle with localization accuracy and height estimation. This study introduces an advanced 3D localization system that integrates updated ultra-wideband (UWB) sensors and dual barometric pressure (BMP) sensors. Utilizing three fixed UWB anchors, the system employs geometric modeling and Kalman filtering for precise tag 3D spatial localization. Building on our previous research on indoor height measurement with dual BMP sensors, the proposed system demonstrates significant improvements in data processing speed and stability. Our enhancements include a new geometric localization model and an optimized Kalman filtering algorithm, which are validated by a high-precision motion capture system. The results show that the localization error is significantly reduced, with height accuracy of approximately ±0.05 m, and the Root Mean Square Error (RMSE) of the 3D localization system reaches 0.0740 m. The system offers expanded locatable space and faster data output rates, delivering reliable performance that supports advanced applications requiring detailed 3D indoor localization.

A preliminary study about the potential risks of the UV-weathered microplastic: The proteome-level changes in the brain in response to polystyrene derived weathered microplastics.

The growing use of plastic materials has resulted in a constant increase in the risk associated with microplastics (MPs). Ultra-violet (UV) light and wind break down modify MPs in the environment into smaller particles known as weathered MPs (WMPs) and these processes increase the risk of MP toxicity. The neurotoxicity of weathered polystyrene-MPs remains unclear. Therefore, it is important to understand the risks posed by WMPs. We evaluated the chemical changes of WMPs generated under laboratory-synchronized environmentally mimetic conditions and compared them with virgin MPs (VMPs). We found that WMP had a rough surface, slight yellow color, reduced molecular weight, and structural alteration compared with those of VMP. Next, 2 µg of ∼100 µm in size of WMP and VMP were orally administered once a day for one week to C57BL/6 male mice. Proteomic analysis revealed that the WMP group had significantly increased activation of immune and neurodegeneration-related pathways compared with that of the VMP group. Consistently, in in vitro experiments, the human brain-derived microglial cell line (HMC-3) also exhibited a more severe inflammatory response to WMP than to VMP. These results show that WMP is a more profound inflammatory factor than VMP. In summary, our findings demonstrate the toxicity of WMPs and provide theoretical insights into their potential risks to biological systems and even humans in the ecosystem.

Knockdown of Maged1 inhibits cell cycle progression and causes cell death in mouse embryonic stem cells.

Mouse embryonic stem cells (mESCs) are characterized by self-renewal and pluripotency and can undergo differentiation into the three germ layers (ectoderm, mesoderm, and endoderm). Melanoma-associated antigen D1 (Maged1), which is expressed in all developing and adult tissues, modulates tissue regeneration and development. In the present study, we examined the expression and function of Maged1 in mESCs. Maged1 protein and mRNA expression increased during mESC differentiation. The pluripotency of mESCs was significantly reduced through extracellular signal-regulated kinase 1/2 phosphorylation upon knockdown of Maged1, and through G1 cell cycle arrest during cell division, resulting in significantly reduced mESC proliferation. Moreover, the diameter of the embryoid bodies was significantly reduced, accompanied by increased levels of ectodermal differentiation markers and decreased levels of mesodermal and endodermal differentiation markers. Maged1-knockdown mESC lines showed significantly reduced teratoma volumes and inhibition of teratoma formation in nude mice. Additionally, we observed increased ectodermal markers but decreased mesodermal and endodermal markers in teratoma tissues. These findings show that Maged1 affects mESC pluripotency, proliferation, cell cycle, and differentiation, thereby contributing to our understanding of the basic molecular biological mechanisms and potential roles of Maged1 as a regulator of various mESC properties.

Suppression of transient receptor potential melastatin 7 regulates pluripotency, proliferation, and differentiation of mouse embryonic stem cells via mechanistic target of rapamycin-extracellular signal-regulated kinase activation.

Mouse embryonic stem cells (mESCs) are a widely used model for their diverse availability in studying early embryonic development and their application in regenerative treatment of various intractable diseases. Transient receptor potential melastatin 7 (Trpm7) regulates Ca2+ as a nonselective ion channel and is essential for early embryonic development; however, the precise role of Trpm7 in mESCs has not been clearly elucidated. In this study, we showed that the inhibition of Trpm7 affects the pluripotency and self-renewal of mESCs. We found that short hairpin RNA (shRNA)-mediated suppression of Trpm7 resulted in decreased expression of transcriptional regulators, Oct4 and Sox2, which maintain stemness in mESCs. In addition, Trpm7 knockdown led to alterations in the basic properties of mESCs, such as decreased proliferation, cell cycle arrest at the G0/G1 phase, and increased apoptosis. Furthermore, embryoid body (EB) formation and teratoma formation assays revealed abnormal regulation of differentiation due to Trpm7 knockdown, including the smaller size of EBs, elevated ectodermal differentiation, and diminished endodermal and mesodermal differentiation. We found that EB Day 7 samples displayed decreased intracellular Ca2+ levels compared to those of the scrambled group. Finally, we identified that these alterations induced by Trpm7 knockdown occurred due to decreased phosphorylation of mechanistic target of rapamycin (mTOR) and subsequent activation of extracellular signal-regulated kinase (ERK) in mESCs. Our findings suggest that Trpm7 could be a novel regulator for maintaining stemness and modulating the differentiation of mESCs.

NOLC1 knockdown suppresses prostate cancer progressions by reducing AKT phosphorylation and ß-catenin accumulation.

Although several studies have focused on cancer diagnosis and therapy, prostate cancer (PC) remains an intractable disease. Androgen deprivation therapy (ADT), which is used to treat early stage PC can lead to the development of castration-resistant prostate cancer (CRPC), which is highly associated with androgen receptor (AR) mutations. Nucleolar and coiled-body phosphoprotein 1 (NOLC1) is a chaperone that shuttles between the nucleus and the cytoplasm. Studies suggest that NOLC1 regulates PC progression; however, the underlying mechanisms remain unclear. Herein, we showed that NOLC1 knockdown suppresses PC cell proliferation by altering the signaling pathways and the expression of various proteins involved in DNA replication, amino acid metabolism, and RNA processing. Mechanistically, NOLC1 knockdown suppressed cell cycle progression by inhibiting AKT phosphorylation and ß-catenin accumulation. Finally, we showed that NOLC1 expression is higher in human PC than in human hyperplastic prostate tissues. Altogether, we demonstrated that NOLC1 knockdown suppresses the progression of both AR-positive and AR-negative PC cells by inducing changes in the expression of several genes leading to cell cycle arrest. Thus, NOLC1 might be a novel and promising therapeutic target for PC.

Development of a Prototype Overground Pelvic Obliquity Support Robot for Rehabilitation of Hemiplegia Gait.

In this work, we present the overground prototype gait-rehabilitation robot for using motion assistance and training for paralyzed patients. In contrast to the existing gait-rehabilitation robots, which focus on the sagittal plane motion of the hip and knee, we aim to develop a mobile-based pelvic support gait-rehabilitation system that includes a pelvic obliquity support mechanism and a lower-limb exoskeleton. To achieve this, a scissor mechanism is proposed to generate the paralyzed patient's pelvic obliquity motion and weight support. Moreover, the lower limb exoskeleton robot is integrated with the developed system to provide the patient's gait by correcting mechanical aids. We used computer-aided analysis to verify the performance of the prototype hardware itself. Through these methods, it was shown that our motor can sufficiently lift 100 kg of user weight through the scissor mechanism, and that the mobile driving wheel motor can operate at a speed of 1.6 m/s of human walking, showing that it can be used for gait rehabilitation of patients in need of a lower speed. In addition, we verified that the system drives the model by generating pelvic motion, and we verified the position controller of the integrated system, which supports the multi-degree motion by creating hip/knee/pelvic motion with a human dummy mannequin and systems. We believe that the proposed system can help address the complex rehabilitation motion assistance and training of paralyzed patients.

Traction Performance Evaluation of the Electric All-Wheel-Drive Tractor.

This study aims to design, develop, and evaluate the traction performance of an electric all-wheel-drive (AWD) tractor based on the power transmission and electric systems. The power transmission system includes the electric motor, helical gear reducer, planetary gear reducer, and tires. The electric system consists of a battery pack and charging system. An engine-generator and charger are installed to supply electric energy in emergency situations. The load measurement system consists of analog (current) and digital (battery voltage and rotational speed of the electric motor) components using a controller area network (CAN) bus. A traction test of the electric AWD tractor was performed towing a test vehicle. The output torques of the tractor motors during the traction test were calculated using the current and torque curves provided by the motor manufacturer. The agricultural work performance is verified by comparing the torque and rpm (T-N) curve of the motor with the reduction ratio applied. The traction is calculated using torque and specifications of the wheel, and traction performance is evaluated using tractive efficiency (TE) and dynamic ratio (DR). The results suggest a direction for the improvement of the electric drive system in agricultural research by comparison with the conventional tractor through the analysis of the agricultural performance and traction performance of the electric AWD tractor.

Analysis of the Effect of Tillage Depth on the Working Performance of Tractor-Moldboard Plow System under Various Field Environments.

The purpose of this study was to analyze the tillage depth effect on the tractor-moldboard plow systems in various soil environments and tillage depths using a field load measurement system. A field load measurement system can measure the engine load, draft force, travel speed, wheel axle load, and tillage depth in real-time. In addition, measurement tests of soil properties in the soil layer were preceded to analyze the effect of field environments. The presented results show that moldboard plow at the same tillage depth had a wide range of influences on the tractor's working load and performance under various environments. As the draft force due to soil-tool interaction occurred in the range of 5.6-17.7 kN depending on the field environment, the overall mean engine torque and rear axle torque were up to 2.14 times and 1.67 times higher in hard and clayey soil, respectively, than in soft soil environments. In addition, the results showed tractive efficiency of 0.56-0.73 and were analyzed to have a lugging ability of 67.8% with a 44% maximum torque rise. The engine power requirement in hardpan was similar within 3.6-9.6%, but the power demand of the rear axle differed by up to 18.4%.

Oxidation Potential-Guided Electrochemical Radical-Radical Cross-Coupling Approaches to 3-Sulfonylated Imidazopyridines and Indolizines.

Oxidation potential-guided electrochemical radical-radical cross-coupling reactions between N-heteroarenes and sodium sulfinates have been established. Thus, simple cyclic voltammetry measurement of substrates predicts the likelihood of successful radical-radical coupling reactions, allowing the simple and direct synthetic access to 3-sulfonylated imidazopyridines and indolizines. The developed electrochemical radical-radical cross-coupling reactions to sulfonylated N-heteroarenes boast the green synthetic nature of the reactions that are oxidant- and metal-free.

Estimation of Axle Torque for an Agricultural Tractor Using an Artificial Neural Network.

The objective of this study was to develop a model to estimate the axle torque (AT) of a tractor using an artificial neural network (ANN) based on a relatively low-cost sensor. ANN has proven to be useful in the case of nonlinear analysis, and it can be applied to consider nonlinear variables such as soil characteristics, unlike studies that only consider tractor major parameters, thus model performance and its implementation can be extended to a wider range. In this study, ANN-based models were compared with multiple linear regression (MLR)-based models for performance verification. The main input data were tractor engine parameters, major tractor parameters, and soil physical properties. Data of soil physical properties (i.e., soil moisture content and cone index) and major tractor parameters (i.e., engine torque, engine speed, specific fuel consumption, travel speed, tillage depth, and slip ratio) were collected during a tractor field experiment in four Korean paddy fields. The collected soil physical properties and major tractor parameter data were used to estimate the AT of the tractor by the MLR- and ANN-based models: 250 data points were used for developing and training the model were used, the 50 remaining data points were used to test the model estimation. The AT estimated with the developed MLR- and ANN-based models showed agreement with actual measured AT, with the R2 value ranging from 0.825 to 0.851 and from 0.857 to 0.904, respectively. These results suggest that the developed models are reliable in estimating tractor AT, while the ANN-based model showed better performance than the MLR-based model. This study can provide useful results as a simple method using ANNs based on relatively inexpensive sensors that can replace the existing complex tractor AT measurement method is emphasized.

Weakly Supervised Crop Area Segmentation for an Autonomous Combine Harvester.

Machine vision with deep learning is a promising type of automatic visual perception for detecting and segmenting an object effectively; however, the scarcity of labelled datasets in agricultural fields prevents the application of deep learning to agriculture. For this reason, this study proposes weakly supervised crop area segmentation (WSCAS) to identify the uncut crop area efficiently for path guidance. Weakly supervised learning has advantage for training models because it entails less laborious annotation. The proposed method trains the classification model using area-specific images so that the target area can be segmented from the input image based on implicitly learned localization. This way makes the model implementation easy even with a small data scale. The performance of the proposed method was evaluated using recorded video frames that were then compared with previous deep-learning-based segmentation methods. The results showed that the proposed method can be conducted with the lowest inference time and that the crop area can be localized with an intersection over union of approximately 0.94. Additionally, the uncut crop edge could be detected for practical use based on the segmentation results with post-image processing such as with a Canny edge detector and Hough transformation. The proposed method showed the significant ability of using automatic perception in agricultural navigation to infer the crop area with real-time level speed and have localization comparable to existing semantic segmentation methods. It is expected that our method will be used as essential tool for the automatic path guidance system of a combine harvester.

An Intuitive Formulation of the Human Arm Active Endpoint Stiffness.

In this work, we propose an intuitive and real-time model of the human arm active endpoint stiffness. In our model, the symmetric and positive-definite stiffness matrix is constructed through the eigendecomposition Kc=VDVT, where V is an orthonormal matrix whose columns are the normalized eigenvectors of Kc, and D is a diagonal matrix whose entries are the eigenvalues of Kc. In this formulation, we propose to construct V and D directly by exploiting the geometric information from a reduced human arm skeleton structure in 3D and from the assumption that human arm muscles work synergistically when co-contracted. Through the perturbation experiments across multiple subjects under different arm configurations and muscle activation states, we identified the model parameters and examined the modeling accuracy. In comparison to our previous models for predicting human active arm endpoint stiffness, the new model offers significant advantages such as fast identification and personalization due to its principled simplicity. The proposed model is suitable for applications such as teleoperation, human-robot interaction and collaboration, and human ergonomic assessments, where a personalizable and real-time human kinodynamic model is a crucial requirement.

An Online Method to Detect and Locate an External Load on the Human Body with Applications in Ergonomics Assessment.

In this work, we propose an online method to detect and approximately locate an external load induced on the body of a person interacting with the environment. The method is based on a torque equilibrium condition on the human sagittal plane, which takes into account a reduced-complexity model of the whole-body centre of pressure (CoP) along with the measured one, and the vertical component of the ground reaction forces (vGRFs). The latter is combined with a statistical analysis approach to improve the localisation accuracy, (which is subject to uncertainties) to the extent of the industrial applications we target. The proposed technique eliminates the assumption of known contact position of an external load on the human limbs, allowing a more flexible online body-state tracking. The accuracy of the proposed method is first evaluated via a simulation study in which various contact points on different body postures are considered. Next, experiments on human subjects with three different contact locations applied to the human body are presented, revealing the validity of the proposed methodology. Lastly, its benefit in the estimation of human dynamic states is demonstrated. These results add another layer to the online human ergonomics assessment framework developed in our laboratory, extending it to more realistic and varying interaction conditions.

Analysis of Tillage Depth and Gear Selection for Mechanical Load and Fuel Efficiency of an Agricultural Tractor Using an Agricultural Field Measuring System.

This study was conducted to analyze the effects of tillage depth and gear selection on the mechanical load and fuel efficiency of an agricultural tractor during plow tillage. In order to analyze these effects, we developed an agricultural field measuring system consisting of a load measurement part (wheel torque meter, proximity sensor, and real-time kinematic (RTK) global positioning system (GPS)) and a tillage depth measurement part (linear potentiometer and inclinometer). Field tests were carried out using moldboard plows with a maximum tillage depth of 20 cm and three gear selections (M2H, M3L, and M3H) in a rice stubble paddy field for plow tillage. The average travel speed and slip ratio had the lowest M2H and the highest M3L. M3H had the highest theoretical speed, but the travel speed was 0.13 km/h lower than M3L due to the reduction in the axle rotational speed at deep tillage depth. Regarding engine load, the higher the gear, the greater the torque and the lower the axle rotation speed. The front axle load was not significantly affected by the tillage depth as compared to other mechanical parts, except for the M3H gear. The rear axle load generated about twice the torque of the front wheel and overall, it tended to show a higher average rear axle torque at higher gear selection. The rear axle load and fuel rate were found to be most affected by the combination of the tillage depth and gear selection combination. Overall, field test results show that the M3H had the highest fuel efficiency and a high working speed while overcoming high loads at the same tillage depth. In conclusion, M3H is the most suitable gear stage for plow cultivation, and the higher the gear stage and the deeper the tillage depth during plowing, the higher the fuel efficiency. The results of this study will be useful for analyzing mechanical load and fuel efficiency during farm operations. In a future study, we will conduct load analysis studies in other farming operations that consider various soil mechanics factors as well as tillage depths and gear selections.

Development of a Real-Time Tillage Depth Measurement System for Agricultural Tractors: Application to the Effect Analysis of Tillage Depth on Draft Force during Plow Tillage.

The objectives of this study were to develop a real-time tillage depth measurement system for agricultural tractor performance analysis and then to validate these configured systems through soil non-penetration tests and field experiment during plow tillage. The real-time tillage depth measurement system was developed by using a sensor fusion method, consisting of a linear potentiometer, inclinometer, and optical distance sensor to measure the vertical penetration depth of the attached implement. In addition, a draft force measurement system was developed using six-component load cells, and an accuracy of 98.9% was verified through a static load test. As a result of the soil non-penetration tests, it was confirmed that sensor fusion type A, consisting of a linear potentiometer and inclinometer, was 6.34-11.76% more accurate than sensor fusion type B, consisting of an optical distance sensor and inclinometer. Therefore, sensor fusion type A was used during field testing as it was found to be more suitable for use in severe working environments. To verify the accuracy of the real-time tillage depth measurement system, a linear regression analysis was performed between the measured draft and the predicted values calculated using the American Society of Agricultural and Biological Engineers (ASABE) standards-based equation. Experimental data such as traveling speed and draft force showed that it was significantly affected by tillage depth, and the coefficient of determination value at M3-Low was 0.847, which is relatively higher than M3-High. In addition, the regression analysis of the integrated data showed an R-square value of 0.715, which is an improvement compared to the accuracy of the ASABE standard prediction formula. In conclusion, the effect of tillage depth on draft force of agricultural tractors during plow tillage was analyzed by the simultaneous operation of the proposed real-time tillage depth measurement system and draft force measurement system. In addition, system accuracy is higher than the predicted accuracy of ±40% based on the ASABE standard equation, which is considered to be useful for various agricultural machinery research fields. In future studies, real-time tillage depth measurement systems can be used in tractor power train design and to ensure component reliability, in accordance with agricultural working conditions, by predicting draft force and axle loads depending on the tillage depth during tillage operations.

Simulation of Design Factors of a Clutch Pack for Power-Shift Transmission for an Agricultural Tractor.

The objective of this study is the simulation of the most affected design factors and variables of the clutch pack for the power-shift transmission (PST) of a tractor based measured data. The simulation model, the mathematical model of sliding velocity, a moment of inertia, and clutch engagement pressure of clutch pack were developed using the powertrain and configurations of the real PST tractor. In this study, the sensor fusion method was used to precisely measure the proportional valve pressure by test bench, which was applied to the simulation model. The clutch engagement times were found 1.20 s at all temperatures for determined factors. The engagement pressures have a significant difference at various temperatures (25 to 100 °C) of the hydraulic oils after the 1.20 s but the most affected factors were satisfied with the simulation conditions that ensure the clutch engagement on time. Finally, this sensor fusion method is believed to be helpful in realizing precision agriculture through minimization of power loss and maximum energy efficiency of tractors.

Effect of Ankle Range of Motion (ROM) and Lower-Extremity Muscle Strength on Static Balance Control Ability in Young Adults: A Regression Analysis.

BACKGROUND The purpose of this study was to investigate the effect of ankle ROM and lower-extremity muscle strength on static balance control ability in young adults. MATERIAL AND METHODS This study was conducted with 65 young adults, but 10 young adults dropped out during the measurement, so 55 young adults (male: 19, female: 36) completed the study. Postural sway (length and velocity) was measured with eyes open and closed, and ankle ROM (AROM and PROM of dorsiflexion and plantarflexion) and lower-extremity muscle strength (flexor and extensor of hip, knee, and ankle joint) were measured. Pearson correlation coefficient was used to examine the correlation between variables and static balance ability. Simple linear regression analysis and multiple linear regression analysis were used to examine the effect of variables on static balance ability. RESULTS In correlation analysis, plantarflexion ROM (AROM and PROM) and lower-extremity muscle strength (except hip extensor) were significantly correlated with postural sway (p<0.05). In simple correlation analysis, all variables that passed the correlation analysis procedure had significant influence (p<0.05). In multiple linear regression analysis, plantar flexion PROM with eyes open significantly influenced sway length (B=0.681) and sway velocity (B=0.011). CONCLUSIONS Lower-extremity muscle strength and ankle plantarflexion ROM influenced static balance control ability, with ankle plantarflexion PROM showing the greatest influence. Therefore, both contractile structures and non-contractile structures should be of interest when considering static balance control ability improvement.

Evaluation of exhaust emissions of agricultural tractors using portable emissions measurement system in Korean paddy field.

Recently, diesel engine emissions have been designated as a first-class carcinogen by the World Health Organization (WHO). As such, problems with diesel engine emissions continue to increase around the world. This study aimed to analyze the emissions (CO, NOx, PM) of agricultural tractors during farming operations in order to build a reliable national inventory of air pollutant emissions. Emission data were collected using a portable emission measurement system during actual agricultural operation. The load factor (LF) of the engine was calculated using the collected engine information, the emission factor was analyzed using the LF and the measured emission. The LF was significantly different from the current standard value of 0.48, which is used in Korea to calculate exhaust emissions. The deviation ratio of the emission factor was 0.039 ~ 56.59 compared to Tier-4 emission regulation standards. Under many conditions, the calculated emission factor was higher than the emission limit. Thus, this study provides useful information for emission inventory construction through emission calculation under actual conditions and suggests the need to realize the currently applied emission factor.

hMAGEA2 Accelerates the Progression of Prostate Cancer via the EFNA3-Erk1/2 Signaling Pathway.

BACKGROUND/AIM: Human melanoma-associated antigen A2 (hMAGEA2) family members play several roles in many types of cancer and have been explored as potential prognostic markers. In this study, we investigated the molecular mechanism underlying hMAGEA2-mediated tumorigenesis of prostate cancer. MATERIALS AND METHODS: Immunohistochemistry and western blot were used to assess protein expression whereas microarray and quantitative reverse transcription-PCR determined mRNA expression. CCK-8 assay was used to determine cell proliferation. Colony formation assay was used to examine tumorigenesis. Migration and invasion were examined using a transwell assay. Propidium iodide (PI)/Annexin V double staining was performed to measure apoptosis. Transcriptional activity was measured using Dual-luciferase reporter assay. RESULTS: hMAGEA2 was highly over-expressed in human prostate cancer tissues compared to benign prostatic hyperplasia tissues. To elucidate its biological function in prostate cancer, we established two stable hMAGEA2-knockdown prostate cancer cell lines, PC3M and 22RV1, and found that they presented significantly decreased proliferation, anchorage-independent colony formation, migration, and invasion. As hMAGEA2 knockdown suppressed prostate cancer cell growth, we examined its potential influence on tumor apoptosis. hMAGEA2-knockdown cell lines displayed early apoptosis. Moreover, knockdown of hMAGEA2 resulted in the down-regulation of EFNA3 expression. Luciferase assay showed that hMAGEA2 bound to the EFNA promoter region and regulated its transcription. Down-regulation of EFNA3 expression led to decreased Ras/Braf/MEK/Erk1/2 phosphorylation and, consequently, inhibited prostate cancer progression. CONCLUSION: hMAGEA2 promotes prostate cancer growth, metastasis, and tumorigenesis by regulating the EFNA3-Erk1/2 signaling pathway, indicating its potential as a therapeutic marker for prostate cancer.