Unlocking the Potential of Polythioesters.

As the demand for sustainable polymers increases, most research efforts have focused on polyesters, which can be bioderived and biodegradable. Yet analogous polythioesters, where one of the oxygen atoms has been replaced by a sulfur atom, remain a relatively untapped source of potential. The incorporation of sulfur allows the polymer to exhibit a wide range of favorable properties, such as thermal resistance, degradability, and high refractive index. Polythioester synthesis represents a frontier in research, holding the promise of paving the way for eco-friendly alternatives to conventional polyesters. Moreover, polythioester research can also open avenues to the development of sustainable and recyclable materials. In the last 25 years, many methods to synthesize polythioesters have been developed. However, to date no industrial synthesis of polythioesters has been developed due to challenges of costs, yields, and the toxicity of the by-products. This review will summarize the recent advances in polythioester synthesis, covering step-growth polymerization, ring-opening polymerization (ROP), and biosynthesis. Crucially, the benefits and challenges of the processes will be highlighted, paying particular attention to their sustainability, with the aim of encouraging further exploration and research into the fast-growing field of polythioesters.

Phenacyl Bromide as a Single-Component Photoinitiator: Photoinduced Step-Growth Polymerization of N-Methylpyrrole and N-Methylindole.

The synthesis of step-growth polymers by photoinduced methods is a challenging issue in synthetic chemistry. Here, we report a single component near UV responsive photopolymerization system for step-growth polymerization of N-methylpyrrole (MPyr) and N-methylindole (MIn) by using phenacyl bromide (PAB). The obtained high molecular weight conjugated polymers were characterized by spectral and chromatographic methods. Detailed laser flash photolysis and spectroscopic studies revealed that polymerization proceeds by successive photoinduced cleavage of PAB followed by electron transfer, proton release and coupling processes. After photolysis, chain growth continues also in daylight or dark by acidic oxidation. The structural features of the polymers were investigated. PAB single component photoinitiator enables an efficient, rapid, room temperature step-growth polymerization process of MPyr and MIn that can be applied to other conjugated monomers.

A Novel Photoinduced Ligation Approach for Cross-Linking Polymerization, Polymer Chain-End Functionalization, and Surface Modification Using Benzoyl Azides.

Various ligation processes have recently become a powerful tool in synthetic polymer chemistry. Herein, the use of a new photochemical ligation process as a versatile approach for the cross-linking polymerization, functionalization of polymer chain ends, and surface modification of various materials such as silica and graphene oxide, is demonstrated. The process is based on the formation of urethane linkages by the reaction of photochemically in situ generated isocyanates from benzoyl azides with hydroxyl moieties in the presence of organobase, bicyclo[2.2.2]-1,4-diazaoctane (DABCO) under ambient conditions. The intermediates and obtained materials are characterized by NMR, FTIR, TGA, and TEM analyses. It is believed that this simple and efficient ligation process will expand future applications to fabricate complex macromolecular structures, biomaterials, and gels.

Exfoliated black phosphorous-mediated CuAAC chemistry for organic and macromolecular synthesis under white LED and near-IR irradiation.

The development of long-wavelength photoinduced copper-catalyzed azide-alkyne click (CuAAC) reaction routes is attractive for organic and polymer chemistry. In this study, we present a novel synthetic methodology for the photoinduced CuAAC reaction utilizing exfoliated two-dimensional (2D) few-layer black phosphorus nanosheets (BPNs) as photocatalysts under white LED and near-IR (NIR) light irradiation. Upon irradiation, BPNs generated excited electrons and holes on its conduction (CB) and valence band (VB), respectively. The excited electrons thus formed were then transferred to the CuII ions to produce active CuI catalysts. The ability of BPNs to initiate the CuAAC reaction was investigated by studying the reaction between various low molar mass alkyne and azide derivatives under both white LED and NIR light irradiation. Due to its deeper penetration of NIR light, the possibility of synthesizing different macromolecular structures such as functional polymers, cross-linked networks and block copolymer has also been demonstrated. The structural and molecular properties of the intermediates and final products were evaluated by spectral and chromatographic analyses.

Near-Infrared Free-Radical and Free-Radical-Promoted Cationic Photopolymerizations by In-Source Lighting Using Upconverting Glass.

A method is presented for the initiation of free-radical and free-radical-promoted cationic photopolymerizations by in-source lighting in the near-infrared (NIR) region using upconverting glass (UCG). This approach utilizes laser irradiation of UCG at 975 nm in the presence of fluorescein (FL) and pentamethyldiethylene triamine (PMDETA). FL excited by light emitted from the UCG undergoes electron-transfer reactions with PMDETA to form free radicals capable of initiating polymerization of methyl methacrylate. To execute the corresponding free-radical-promoted cationic polymerization of cyclohexene oxide, isobutyl vinyl ether, and N-vinyl carbazole, it was necessary to use FL, dimethyl aniline (DMA), and diphenyliodonium hexafluorophosphate as sensitizer, coinitiator, and oxidant, respectively. Iodonium ions promptly oxidize DMA radicals formed to the corresponding cations. Thus, cationic polymerization with efficiency comparable to the conventional irradiation source was achieved.

Exosomes encapsulated in hydrogels for effective central nervous system drug delivery.

The targeted delivery of pharmacologically active molecules, metabolites, and growth factors to the brain parenchyma has become one of the major challenges following the onset of neurodegeneration and pathological conditions. The therapeutic effect of active biomolecules is significantly impaired after systemic administration in the central nervous system (CNS) because of the blood-brain barrier (BBB). Therefore, the development of novel therapeutic approaches capable of overcoming these limitations is under discussion. Exosomes (Exo) are nano-sized vesicles of endosomal origin that have a high distribution rate in biofluids. Recent advances have introduced Exo as naturally suitable bio-shuttles for the delivery of neurotrophic factors to the brain parenchyma. In recent years, many researchers have attempted to regulate the delivery of Exo to target sites while reducing their removal from circulation. The encapsulation of Exo in natural and synthetic hydrogels offers a valuable strategy to address the limitations of Exo, maintaining their integrity and controlling their release at a desired site. Herein, we highlight the current and novel approaches related to the application of hydrogels for the encapsulation of Exo in the field of CNS tissue engineering.

An unusual zig-zag 2D copper(I) coordination polymer as an outstanding catalyst for azide-alkyne "click" chemistry at room temperature.

A straightforward method for the synthesis of a two-dimensional (2D) new copper(I) coordination polymer, namely Cu(bzpdc), containing the ligand benzophenone 4,4'-dicarboxylate, and its effective use as catalyst for the azide-alkyne click chemistry at room temperature is reported. Zig-zag formation caused by cuprophilic interactions resulted in an unprecedented crystal structure with a very high copper content (45.5% by weight). The catalyst was stable up until 300 °C and tolerant to various solvents, including water. Cu(bzpdc) showed excellent catalytic activity for click reactions of several organic azides and alkynes having different functional groups at room temperature and is comparable to its homogenous analogues. The recyclability of Cu(bzpdc) was also tested and proven to be effective.

Expanding the Scope of 2D Black Phosphorus Catalysis to the Near-Infrared Light Initiated Free Radical Photopolymerization.

In the drive toward the development of efficient and stable inorganic semiconductor materials with broadband solar absorption ability to induce various photochemical processes is a highly attractive research field. In this study, two-dimensional (2D) few-layer black phosphorus (BP) exfoliated in a solvent is utilized as photocatalyst to initiate the polymerization of various monomers under visible and near-IR (NIR) light irradiation. Upon the light exposure, few-layer BP generates excited electrons and holes, which undergo electron transfer reactions with the onium salts to form free radicals capable of initiating free radical polymerization. Among the onium salts tested, aryldiazonium salt was found to be the most efficient in the photopolymerization process owing to its favorable reduction potential with the conduction edge potential of BP. The presented strategy also provides the possibility for the in situ preparation of BP-polymer composite materials.