Two-Electron-Induced Reorganization of Cobalt Coordination and Metal-Ligand Cooperative Redox Shifting Co(I) Reactivity toward CO2 Reduction.

Electrochemical reorganization of complex structures is directly related to catalytic reactivity; thus, the geometric changes of catalysts induced by electron transfer should be considered to scrutinize the reaction mechanism. Herein, we studied electron-induced reorganization patterns of six-coordinate Co complexes with neutral N-donor ligands. Upon two-electron transfer into a Co center enclosed within a bulky π-acceptor ligand, the catalytic site exhibited different reorganization patterns depending on the ligand characteristics. While a bipyridyl ligand released Co-bound solvent (CH3CN) to open a reaction site, a phenanthroline ligand caused Co-Narm (side "arm" of NNN-ligand) bond dissociation. The first electron transfer occurred in the Co(II/I) reduction step and the second electron entered the bulky π-acceptor, of which redox steps were assigned from cyclic voltammograms, magnetic moment measurements, and DFT calculations. In comparison, the Co complex of [NNNNCH3-Co(CH3CN)3](PF6)2 ([1-(CH3CN)3](PF6)2) showed a high H2 evolution reactivity (HER), whereas a series of Co complexes with bulky π-acceptors such as [NNNNCH3-Co(L)(CH3CN)](PF6)2 (L = phen ([2-CH3CN](PF6)2), bpy ([3-CH3CN](PF6)2), [NNNNCH3-Co(tpy)](PF6)2 ([4](PF6)2), and [NNNCH2-Co(phen)(CH3CN)](PF6)2 ([5-CH3CN](PF6)2)) suppressed the HER but rather enhanced the CO2 reduction reaction. The metal-ligand cooperative redox steps enabled the shift of Co(I) reactivity toward CO2 reduction. Additionally, the amine pendant attached to the NNNNCH3-ligand could stabilize the CO2 reduction intermediate through the hydrogen-bonding interaction with the Co-CO2H adduct.

Unlocking Cu(I)-Mediated Catalytic Pathways for Efficient ROS Generation by Incorporating an Oxazole-Based Histidine Surrogate into Cu(II)-ATCUN Complexes.

The catalytic redox activity of Cu(II) bound to the amino-terminal copper and nickel (ATCUN) binding motif (Xxx-Zzz-His, XZH) is stimulating the development of catalytic metallodrugs based on reactive oxygen species (ROS)-mediated biomolecule oxidation. However, low Cu(I) availability resulting from the strong Cu(II) binding affinity of the ATCUN motif is regarded as a limitation to efficient ROS generation. To address this, we replaced the imidazole moiety (pKa 7.0) of Gly-Gly-His-NH2 (GGHa, a canonical ATCUN peptide) with thiazole (pKa 2.7) and oxazole (pKa 0.8), yielding GGThia and GGOxa, respectively. A newly synthesized amino acid, Fmoc-3-(4-oxazolyl)-l-alanine, served as a histidine surrogate featuring an azole ring with the lowest pKa among known analogues. Despite similar square-planar Cu(II)-N4 geometries being observed for the three Cu(II)-ATCUN complexes by electron paramagnetic resonance spectroscopy and X-ray crystallography, the azole modification enabled the Cu(II)-ATCUN complexes to exhibit significant rate enhancement for ROS-mediated DNA cleavage. Further analyses based on Cu(I)/Cu(II) binding affinities, electrochemical measurements, density functional theory calculations, and X-ray absorption spectroscopy indicated that the azole modification enhanced the accessibility of the Cu(I) oxidation state during ROS generation. Our oxazole/thiazole-containing ATCUN motifs provide a new design strategy for peptide ligands with modulated N donor ability, with potential applications in the development of ROS-mediated metallodrugs.

Selective Formation of Mononuclear Palladium and Acetonitrile-Bridged Dinuclear Palladium Complexes Containing a Chiral Tridentate Ligand.

From the chiral Schiff base tridentate ligand LPh, unusual acetonitrile-bridged dinuclear palladium complex 1 and organopalladium complex 1' were synthesized selectively by using acetonitrile and ethanol, respectively. The chiral tridentate Schiff base ligand was bound to the palladium metal center with different chelation modes ([ONO] for 1 and [CNO] for 1'). Complex 1 constitutes the first example of dinuclear metal complexes connected only by a bridging acetonitrile, in which an exceptionally short C≡N bond distance [0.945(12) Å] of bridged acetonitrile was observed. To study the influence of a phenyl group attached to an imine, the phenyl-free ligand LH was prepared and used. In that case, an acetonitrile bridge was not observed. Theoretical calculation studies supporting the formation of 1 and 1' are favored.

First report of Tulip Virus X infecting tulip (Tulipa gesneriana) in Korea.

Tulip virus X (tulip virus X, TVX) is a member of the genus Potexvirus (family Alphaflexiviridae) and is a positive single-stranded RNA virus. TVX was described first in Scotland (Mowat 1982), followed by several countries (Yamaji et al. 2001; Tzanetakis et al. 2005; Ward et al. 2008; Dees et al. 2011; Sochacki and Komorowska 2012; Wylie et al. 2019). In April 2021, 86 whole tulip plants showing viral symptoms in leaves (mosaic, yellowing, and malformation) and flowers (color breaking) were collected in Chilgok, Chuncheon, Goseong, Yecheon and Yesan, Korea. Furthermore, high-throughput sequencing was performed to identify viruses that infect tulips in Korea. Total RNA was extracted from pooled the leaves and petals using a Maxwell® 16 LEV Plant RNA Kit (Promega, Madison, USA). We constructed a single library using the TruSeq Stranded Total RNA LT Sample Prep Kit for Plant (Illumina, San Diego, USA). The library was 100 bp paired-end sequenced using Illumina's NovaSeq 6000 (Macrogen, Seoul, Korea) and was assembled de novo using Trinity software version trinityrnaseq_r20140717, with default parameters. The contigs were annotated as in previous study (Lee et al. 2020), revealing a single contig each related to TVX, lily symptomless virus (LSV), and tulip breaking virus (TBV) was generated from 648 million total reads. The TVX-related contig (GenBank ON205948) consisting of 6,076 bp showed 99.52% nucleotide identity (6027/6056 bp) with TVX-J (GenBank AB066288). We conducted an RT-PCR assay to validate the presence of viruses with specific primers as TVX-F5093/R5624 (5'-CTATCCGGACTCATTCTACTTC/GTGCGTTCCAGATAAGCTTG-3'), LSV-F7013/R7338 (5'-CTTGGTCGACAGGGACATAAC/GATTGGAATTGTGCTTTTCAGC-3'), and TBV-F7515/R8116 (5'-GTGTGTCATGGATGATTGTTG/CAACTGATTTGCTACCGCTAG-3'). Consequently, TVX were detected in 13 of 86 samples. Moreover, LSV and TBV were detected in 15 and 26 samples, respectively. However, the yellowing and mosaic observed in the TVX infected samples were not observed in the LSV and TBV infected samples. Subsequently, two TVX amplicons were selected, cloned and sequenced. The obtained sequences were 532 bp and were named YS24 and YS38 (GenBank LC664027 and LC664028), respectively. The Korean isolates showed 98.68% (525/532 bp) and 99.62% (530/532 bp) identity with Australian isolate (GenBank MH886522) in BLASTn analysis. To bioassay for TVX, the infected tulip leaf tissue from which YS24 was obtained was used to sap-inoculate, in triplicates, 15 species of indicator plants (Nicotiana benthamiana, N. clevelandii, N. debneyi, N. glutinosa, N. rustica, N. tabacum, Datura stramonium, Glycine max, Phaseolus vulgaris, Chenopodium amaranticolor, C. quinoa, Cucumis sativus, Cu. melo, Gomphrena globosa, and Tetragonia tetragonioides). After 14 days of inoculation, we observed distinct chlorotic spots on inoculated and upper leaves of C. quinoa, but no symptoms were observed in other indicator plants. In RT-PCR assay using TVX-specific primers, only C. quinoa showed a positive reaction. In previous studies, C. amaranticolor, C. quinoa, G. globosa, and N. benthamiana were known as the experimental host of TVX (Dees et al. 2011; Tzanetakis et al. 2005), but only C. quinoa was confirmed to be susceptible to the Korean isolate. Furthermore, transmission electron microscopy revealed typical flexuous rod-shaped viral particles in the inoculated C. quinoa. To our knowledge, this is the first report of TVX infecting tulips in Korea.

Identification of Single-Atom Ni Site Active toward Electrochemical CO2 Conversion to CO.

Electrocatalytic conversion of CO2 into value-added products offers a new paradigm for a sustainable carbon economy. For active CO2 electrolysis, the single-atom Ni catalyst has been proposed as promising from experiments, but an idealized Ni-N4 site shows an unfavorable energetics from theory, leading to many debates on the chemical nature responsible for high activity. To resolve this conundrum, here we investigated CO2 electrolysis of Ni sites with well-defined coordination, tetraphenylporphyrin (N4-TPP) and 21-oxatetraphenylporphyrin (N3O-TPP). Advanced spectroscopic and computational studies revealed that the broken ligand-field symmetry is the key for active CO2 electrolysis, which subordinates an increase in the Ni redox potential yielding NiI. Along with their importance in activity, ligand-field symmetry and strength are directly related to the stability of the Ni center. This suggests the next quest for an activity-stability map in the domain of ligand-field strength, toward a rational ligand-field engineering of single-atom Ni catalysts for efficient CO2 electrolysis.

Replacement of the Common Chromium Source CrCl3(thf)3 with Well-Defined [CrCl2(µ-Cl)(thf)2]2.

CrCl3(thf)3 is a common starting material in the synthesis of organometallic and coordination compounds of Cr. Deposited as an irregular solid with no possibility of recrystallization, it is not a purity guaranteed chemical, causing problems in some cases. In this work, we disclose a well-defined form of the THF adduct of CrCl3 ([CrCl2(µ-Cl)(thf)2]2), a crystalline solid, that enables structure determination by X-ray crystallography. The EA data and XRD pattern of the bulk agreed with the revealed structure. Moreover, its preparation procedure is facile: evacuation of CrCl3·6H2O at 100 °C, treatment with 6 equivalents of Me3SiCl in a minimal amount of THF, and crystallization from CH2Cl2. The ethylene tetramerization catalyst [iPrN{P(C6H4-p-Si(nBu)3)2}2CrCl2]+[B(C6F5)4]- prepared using well-defined [CrCl2(µ-Cl)(thf)2]2 as a starting material exhibited a reliably high activity (6600 kg/g-Cr/h; 1-octene selectivity at 40 °C, 75%), while that of the one prepared using the impure CrCl3(thf)3 was inconsistent and relatively low (~3000 kg/g-Cr/h). By using well-defined [CrCl2(µ-Cl)(thf)2]2 as a Cr source, single crystals of [(CH3CN)4CrCl2]+[B(C6F5)4]- and [{Et(Cl)Al(N(iPr)2)2}Cr(µ-Cl)]2 were obtained, allowing structure determination by X-ray crystallography, which had been unsuccessful when the previously known CrCl3(thf)3 was used as the Cr source.

Preparation of High-Purity Ammonium Tetrakis(pentafluorophenyl)borate for the Activation of Olefin Polymerization Catalysts.

Homogeneous olefin polymerization catalysts are activated in situ with a co-catalyst ([PhN(Me)2-H]+[B(C6F5)4]- or [Ph3C]+[B(C6F5)4]-) in bulk polymerization media. These co-catalysts are insoluble in hydrocarbon solvents, requiring excess co-catalyst (>3 eq.). Feeding the activated species as a solution in an aliphatic hydrocarbon solvent may be advantageous over the in situ activation method. In this study, highly pure and soluble ammonium tetrakis(pentafluorophenyl)borates ([Me(C18H37)2N-H]+[B(C6F5)4]- and [(C18H37)2NH2]+[B(C6F5)4]-) containing neither water nor Cl- salt impurities were prepared easily via the acid-base reaction of [PhN(Me)2-H]+[B(C6F5)4]- and the corresponding amine. Using the prepared ammonium salts, the activation reactions of commercial-process-relevant metallocene (rac-[ethylenebis(tetrahydroindenyl)]Zr(Me)2 (1-ZrMe2), [Ph2C(Cp)(3,6-tBu2Flu)]Hf(Me)2 (3-HfMe2), [Ph2C(Cp)(2,7-tBu2Flu)]Hf(Me)2 (4-HfMe2)) and half-metallocene complexes ([(η5-Me4C5)Si(Me)2(κ-NtBu)]Ti(Me)2 (5-TiMe2), [(η5-Me4C5)(C9H9(κ-N))]Ti(Me)2 (6-TiMe2), and [(η5-Me3C7H1S)(C10H11(κ-N))]Ti(Me)2 (7-TiMe2)) were monitored in C6D12 with 1H NMR spectroscopy. Stable [L-M(Me)(NMe(C18H37)2)]+[B(C6F5)4]- species were cleanly generated from 1-ZrMe2, 3-HfMe2, and 4-HfMe2, while the species types generated from 5-TiMe2, 6-TiMe2, and 7-TiMe2 were unstable for subsequent transformation to other species (presumably, [L-Ti(CH2N(C18H37)2)]+[B(C6F5)4]--type species). [L-TiCl(N(H)(C18H37)2)]+[B(C6F5)4]--type species were also prepared from 5-TiCl(Me) and 6-TiCl(Me), which were newly prepared in this study. The prepared [L-M(Me)(NMe(C18H37)2)]+[B(C6F5)4]--, [L-Ti(CH2N(C18H37)2)]+[B(C6F5)4]--, and [L-TiCl(N(H)(C18H37)2)]+[B(C6F5)4]--type species, which are soluble and stable in aliphatic hydrocarbon solvents, were highly active in ethylene/1-octene copolymerization performed in aliphatic hydrocarbon solvents.

Spirobifluorene-Based o-Carboranyl Compounds: Insights into the Rotational Effect of Carborane Cages on Photoluminescence.

9,9'-Spirobifluorene-based closo-o-carboranyl (SFC1 and SFC2) compounds and their nido-derivatives (nido-SFC1 and nido-SFC2) were prepared and characterized. The two closo-compounds displayed major absorption bands assignable to π-π* transitions involving the spirobifluorene group, as well as weak intramolecular charge-transfer (ICT) transitions between the o-carboranes and their spirobifluorene moieties. The nido-compounds exhibited slightly blueshifted absorption bands resulting from the absence of the ICT transitions corresponding to the o-carborane moieties due to the anionic character of the nido-o-carboranes. While SFC1 exhibited only high-energy emissions in THF at 298 K (only from locally excited (LE) states assignable to π-π* transitions on the spirobifluorene group), remarkable emissions in the low-energy region were observed in the rigid state such as in THF at 77 K and in the film state. SFC2 displayed intense emissions in the low-energy region in all states. The fact that neither of the nido-derivatives of SFC1 and SFC2 exhibited low-energy emissions and the TD-DFT calculation results of each closo-compound clearly verified that the low-energy emission was based on ICT-based radiative decay. The conformational barriers from each relative energy calculation upon changing the dihedral angles around the o-carborane cages for both compounds confirmed that the rotation of the o-carborane cages and terminal phenyl rings for SFC1 is freer than that for SFC2.

Mitochondrial Localization of Highly Fluorescent and Photostable BODIPY-Based Ruthenium(II), Rhodium(III), and Iridium(III) Metal Complexes.

A new N,O-based BODIPY ligand was synthesized and further utilized to develop highly fluorescent and photostable Ru(II), Rh(III), and Ir(III) metal complexes. The complexes were fully characterized by different analytical techniques including single-crystal XRD studies. The photostabilities and live cell imaging capabilities of the complexes were investigated via confocal microscopy. The complexes localized specifically in the mitochondria of live cells and showed negligible cytotoxicities at a concentration used for imaging purposes. They also exhibited high photostabilities, with fluorescence intensities remaining above 50% after 1800 scans.

Selective Self-Assembly of a Rectangular Ruthenium Supramolecule from an Unsymmetrical Bridging Unit.

Herein, we report the synthesis of an unsymmetrical diruthenium bridging unit containing a multidentate oxamate ligand and the subsequent formation of a rectangular supramolecule. The reaction of oxamate 1, 2-((4-bromo-2,6-dimethylphenyl)amino)-2-oxo-acetic acid, and [(p-cymene)RuCl2]2 affords a novel unsymmetrical diruthenium acceptor clip 2, where two ruthenium metal centers are ligated with either [O,O] or [N,O]. The molecular clip 2 and bipyridine donor self-assemble to form two-dimensional rectangular supramolecule 3. Self-assembly can produce seven possible isomers depending on the position of the substituted bromoaryl groups. However, 1H NMR spectroscopic investigation indicated only two different isomers in the reaction mixture. A single isomer is isolated via crystallization, and X-ray crystallography confirms that the product is a C1 symmetric two-dimensional rectangular supramolecule, in which two bromoaryl groups are located in the farthest position from each other. Theoretical calculations suggest that the self-assembly of supramolecule 3 occurred via 1:1 adducts of the diruthenium molecular clip and bipyridine as an intermediate to predominantly form a single isomer.

A Series of Quinolinol-Based Indium Luminophores: A Rational Design Approach for Manipulating Photophysical Properties.

An approach to the design of a series of quinolinol-based indium complexes that can exhibit different optical properties is proposed. Mono-incorporated (Inq1 and InMeq1), bis-incorporated (InMeq2), and tris-incorporated (Inq3 and InMeq3) indium quinolinate complexes have been prepared. These complexes have also been characterized by X-ray crystallography. The photophysical properties of these complexes have also been examined by a combination of experimental and theoretical techniques. The indium complexes with a single quinolinol ligand (Inq1 and InMeq1) showed higher quantum efficiency than those with two or three quinolinate ligands; in particular, InMeq1 exhibited the highest quantum yield [ΦPL = 59% in poly(methyl methacrylate) film]. The insights into the nature of these findings were obtained by the sequential synthesis of the quinolinol-based indium luminophores and a detailed investigation of their structural stability.

Preparation of Pincer Hafnium Complexes for Olefin Polymerization.

Pincer-type [Cnaphthyl, Npyridine, Namido]HfMe2 complex is a flagship among the post-metallocene catalysts. In this work, various pincer-type Hf-complexes were prepared for olefin polymerization. Pincer-type [Namido, Npyridine, Namido]HfMe2 complexes were prepared by reacting in situ generated HfMe4 with the corresponding ligand precursors, and the structure of a complex bearing 2,6-Et2C6H3Namido moieties was confirmed by X-ray crystallography. When the ligand precursors of [(CH3)R2Si-C5H3N-C(H)PhN(H)Ar (R = Me or Ph, Ar = 2,6-diisopropylphenyl) were treated with in situ generated HfMe4, pincer-type [Csilylmethyl, Npyridine, Namido]HfMe2 complexes were afforded by formation of Hf-CH2Si bond. Pincer-type [Cnaphthyl, Sthiophene, Namido]HfMe2 complex, where the pyridine moiety in the flagship catalyst was replaced with a thiophene unit, was not generated when the corresponding ligand precursor was treated with HfMe4. Instead, the [Sthiophene, Namido]HfMe3-type complex was obtained with no formation of the Hf-Cnaphthyl bond. A series of pincer-type [Cnaphthyl, Npyridine, Nalkylamido]HfMe2 complexes was prepared where the arylamido moiety in the flagship catalyst was replaced with alkylamido moieties (alkyl = iPr, cyclohexyl, tBu, adamantyl). Structures of the complexes bearing isopropylamido and adamantylamido moieties were confirmed by X-ray crystallography. Most of the complexes cleanly generated the desired ion-pair complexes when treated with an equivalent amount of [(C18H37)2N(H)Me]+[B(C6F5)4]-, which showed negligible activity in olefin polymerization. Some complexes bearing bulky substituents showed moderate activities, even though the desired ion-pair complexes were not cleanly afforded.

Tetra-, Hexa-, Dodeca-Nuclear Ir Supramolecules via Bridge-Driven Self-Assembly of Tetrazolyl Ligands.

Herein, we report the formation of multinuclear Ir4, Ir6, and Ir12 supramolecular complexes via the bridge-driven self-assembly of tetrazolyl ligands. The synthesis of dimeric half-sandwich Ir units was made by the reaction of half-sandwich Ir units and tetrazolyl ligands in a molar ratio of 1:2. The use of different ligands containing multiple tetrazolyl units resulted in the formation of different Ir supramolecular architectures. The reaction of [Cp*IrCl2]2, AgOTf, and 1,2- or 1,3-ditetrazolyl benzene in a molar ratio of 1:3:1 resulted in the formation of rectangular tetranuclear or truncated trigonal pyramidal hexanuclear Ir complexes, respectively. On the other hand, the reaction of [Cp*IrCl2]2, AgOTf, and 1,3,5-tritetrazolyl benzene in a molar ratio of 6:18:4 produced a supramolecular dodecanuclear iridium complex. The molecular structure of the complex resembled a truncated tetrahedral structure with a large inner cavity, as determined by X-ray crystallography.

Supramolecular Pt(II) and Ru(II) Trigonal Prismatic Cages Constructed with a Tris(pyridyl)borane Donor.

We report a novel example of supramolecular cages containing a Lewis acidic trigonal boron center. Self-assembly of the tris(pyridyl)borane donor 1 with diruthenium (2) or platinum (3), as an electron acceptor, furnished boron-containing trigonal prismatic supramolecular cages 5 and 6, which were characterized by 1H NMR and electrospray ionization time-of-flight mass spectroscopy and X-ray crystallography. The molecular structure of cage 5 was confirmed as a trigonal prismatic cage with an inner dimension of about 400 Å3. The fluoride binding properties of borane ligand 1 and Pt cage 6 were studied. UV/vis absorption titration studies demonstrated that the boron center of cage 6 undergoes strong binding interaction with the fluoride ion, with an estimated binding constant of 1.3 × 1010 M-2 in acetone based on the 1:2 binding isotherm. The binding was also confirmed by 1H NMR titration. Photoluminescence titration studies showed that cage 6 emitted borane-centered fluorescence (τ = 2.21 ns), which was gradually quenched upon addition of fluoride. When excess fluoride was added to a solution of 6, however, dissociation of the pyridyl ligand from the Pt(II) center was observed.

Nido-Carboranes: Donors for Thermally Activated Delayed Fluorescence.

An approach to the design of nido-carborane-based luminescent compounds that can exhibit thermally activated delayed fluorescence (TADF) is proposed. 7,8-Dicarba-nido-undecaboranes (nido-carboranes) having various 8-R groups (R=H, Me, i-Pr, Ph) are appended to the meta or para position of the phenyl ring of the dimesitylphenylborane (PhBMes2 ) acceptor, forming donor-acceptor compounds (nido-m1-m4 and nido-p1-p4). The bulky 8-R group and meta substitution of the nido-carborane are essential to attain a highly twisted arrangement between the donor and acceptor moieties, leading to a very small energy splitting between the singlet and triplet excited states (ΔEST <0.05 eV for nido-m2, -m3, and -p3). These compounds exhibit efficient TADF with microsecond-range lifetimes. In particular, nido-m2 and -m3 display aggregation-induced emission (AIE) with TADF properties.

Self-Assembly of Novel Thiophene-Based BODIPY RuII Rectangles: Potential Antiproliferative Agents Selective Against Cancer Cells.

Novel Ru (2+2) rectangles were designed and synthesized by self-assembly of a new thiophene-functionalized dipyridyl BODIPY ligand, BDPS, and ruthenium(II) precursors. The complexes exhibited dose-dependent antiproliferative activities against cancer cells, in which some compounds selectively kill cancer cells. The net fluorescence due to BODIPY allowed us to visualize their location inside cancer cells. Moreover, the metalla-rectangles displayed substantial propensity to bind with biomolecules.

Unique Ruthenium Bimetallic Supramolecular Cages From C4-Symmetric Tetrapyridyl Metalloligands.

The self-assembly of C4-symmetric tetrapyridyl metalloligands containing Fe or Co and diruthenium electron acceptors by means of dative coordination bonding led to the formation of six different heterobimetallic supramolecules. All complexes were characterized by X-ray crystallography, ESI mass spectrometry, and 1H NMR (in the case of diamagnetic systems) spectroscopy. The bridging units in the diruthenium complexes greatly influenced the geometrical preference of the supramolecular structures, resulting in the formation of different architectures, namely A4D2 or A6D3 (A = acceptor, D = donor). Depending on the bridging unit, A4D2 tetragonal prism, A4D2 molecular tweezer, or A6D3 triple-decker complexes were obtained selectively. The self-assembly of an unexpected triple-decker type Ru12Fe3 heterobimetallic species was also observed.

Cationic Ti Complexes with Three [N,O]-Type Tetrazolyl Ligands: Ti↔Fe Transmetalation within Fe Metallascorpionate Complexes.

Herein, we report the synthesis of two novel ionic Ti complexes possessing three [N,O]-type bidentate ligands from the reaction of Fe metallascorpionate ligands possessing extended alcohol groups and TiCl4. The reaction of substituted hydroxyphenyl tetrazole and Fe(ClO4)3 in a molar ratio of 3:1 afforded iron scorpionate metalloligands possessing extended arms, which were characterized by IR spectroscopy and ESI-TOF-MS spectrometry. Their molecular structures were also confirmed as neutral Fe-centered scorpionate complexes by X-ray crystallography, in which the extended alcohol groups adopted a tripodal geometry. Moreover, two different crystals of iron scorpionate metalloligand grown from CH2Cl2 and CH3OH were studied, revealing that, in the latter crystal, the tripod arms are folded and aligned toward the C3-rotational axis of the molecule, whereas the tripod arms are unfolded and spread outward from the rotational axis in the former crystal. These metalloligands are solvatochromatic; a bathochromic shift was observed as the solvent polarity increased. From the reaction, the aforesaid Fe complexes were further reacted with TiCl4 in a molar ratio of 1:1 to produce ionic [TiL3]+[FeCl4]- (L = substituted hydroxyphenyl tetrazole) complexes from the transmetalation of Ti and Fe. The complexes were characterized by various analytical methods including UV/vis and IR spectroscopies, electrospray time-of-flight mass spectrometry (ESI-TOF-MS), and X-ray crystallography.

Synthesis and Dual-Emission Feature of Salen-Al/Triarylborane Dyads.

Novel salen-Al/triarylborane dyad complexes were prepared and characterized with their corresponding mononuclear compounds. The UV-vis and photoluminescence experiments for dyads exhibited photoinduced energy transfer from borane to the salen-Al moiety in an intramolecular manner. Theoretical calculation and fluoride titration results further supported these intramolecular energy-transfer features.

Dangling and Hydrolyzed Ligand Arms in [Mn3] and [Mn6] Coordination Assemblies: Synthesis, Characterization, and Functional Activity.

Two flexible, branched, and sterically constrained di- and tripodal side arms around a phenol backbone were utilized in ligands H3L1 and H5L2 to isolate {Mn6} and {Mn3} coordination aggregates. 2,6-Bis{(1-hydroxy-2-methylpropan-2-ylimino)methyl}-4-methylphenol (H3L1) gave trinuclear complex [Mn3(µ-H2L1)2(µ1,3-O2CCH3)4(CH3OH)2](ClO4)2·4CH3OH (1), whereas 2,6-bis[{1-hydroxy-2-(hydroxymethyl)butan-2-ylimino}methyl]-4-methylphenol (H5L2) provided hexanuclear complex [Mn6(µ4-H2L2)2(µ-HL3)2(µ3-OH)2(µ1,3-O2CC2H5)4](ClO4)2·2H2O (2). Binding of acetates and coordination of {H2L1}- provided a linear MnIIIMnIIMnIII arrangement in 1. A MnIII6 fused diadamantane-type assembly was obtained in 2 from propionate bridges, coordination of {H2L2}3-, and in situ generated {HL3}2-. The magnetic characterization of 1 and 2 revealed the properties dominated by intramolecular anti-ferromagnetic exchange interactions, and this was confirmed using density functional theory calculations. Complex 1 exhibited field-induced slow magnetic relaxation at 2 K due to the axial anisotropy of MnIII centers. Both the complexes show effective solvent-dependent catechol oxidation toward 3,5-di-tert-butylcatechol in air. The catechol oxidation abilities are comparable from two complexes of different nuclearity and structure.