Self-similar mesocrystals form via interface-driven nucleation and assembly.

Crystallization by particle attachment (CPA) is a frequently occurring mechanism of colloidal crystallization that results in hierarchical morphologies1-4. CPA has been exploited to create nanomaterials with unusual properties4-6 and is implicated in the development of complex mineral textures1,7. Oriented attachment7,8-a form of CPA in which particles align along specific crystallographic directions-produces mesocrystals that diffract as single crystals do, although the constituent particles are still discernible2,9. The conventional view of CPA is that nucleation provides a supply of particles that aggregate via Brownian motion biased by attractive interparticle potentials1,9-12. However, mesocrystals often exhibit regular morphologies and uniform sizes. Although many crystal systems form mesocrystals1-9 and individual attachment events have been directly visualized10, how random attachment events lead to well defined, self-similar morphologies remains unknown, as does the role of surface-bound ligands, which are ubiquitous in nanoparticle systems3,9,11. Attempts to understand mesocrystal formation are further complicated in many systems by the presence of precursor nanoparticles with a phase distinct from that of the bulk1,13,14. Some studies propose that such particles convert before attachment15, whereas others attribute conversion to the attachment process itself16 and yet others conclude that transformation occurs after the mesocrystals exceed a characteristic size14,17. Here we investigate mesocrystal formation by iron oxides, which are important colloidal phases in natural environments18,19 and classic examples of systems forming ubiquitous precursor phases and undergoing CPA accompanied by phase transformations15,19-21. Combining in situ transmission electron microscopy (TEM) at 80 degrees Celsius with 'freeze-and-look' TEM, we tracked the formation of haematite (Hm) mesocrystals in the presence of oxalate (Ox), which is abundant in soils, where iron oxides are common. We find that isolated Hm particles rarely appear, but once formed, interfacial gradients at the Ox-covered surfaces drive Hm particles to nucleate repeatedly about two nanometres from the surfaces, to which they then attach, thereby generating mesocrystals. Comparison to natural and synthetic systems suggests that interface-driven pathways are widespread.

Chemistry and Dynamics of Supercritical Carbon Dioxide and Methane in the Slit Pores of Layered Silicates.

ConspectusIn the mid 2010s, high-pressure diffraction and spectroscopic tools opened a window into the molecular-scale behavior of fluids under the conditions of many CO2 sequestration and shale/tight gas reservoirs, conditions where CO2 and CH4 are present as variably wet supercritical fluids. Integrating high-pressure spectroscopy and diffraction with molecular modeling has revealed much about the ways that supercritical CO2 and CH4 behave in reservoir components, particularly in the slit-shaped micro- and mesopores of layered silicates (phyllosilicates) abundant in caprocks and shales. This Account summarizes how supercritical CO2 and CH4 behave in the slit pores of swelling phyllosilicates as functions of the H2O activity, framework structural features, and charge-balancing cation properties at 90 bar and 323 K, conditions similar to a reservoir at ∼1 km depth. Slit pores containing cations with large radii, low hydration energy, and large polarizability readily interact with CO2, allowing CO2 and H2O to adsorb and coexist in these interlayer pores over a wide range of fluid humidities. In contrast, cations with small radii, high hydration energy, and low polarizability weakly interact with CO2, leading to reduced CO2 uptake and a tendency to exclude CO2 from interlayers when H2O is abundant. The reorientation dynamics of confined CO2 depends on the interlayer pore height, which is strongly influenced by the cation properties, framework properties, and fluid humidity. The silicate structural framework also influences CO2 uptake and behavior; for example, smectites with increasing F-for-OH substitution in the framework take up greater quantities of CO2. Reactions that trap CO2 in carbonate phases have been observed in thin H2O films near smectite surfaces, including a dissolution-reprecipitation mechanism when the edge surface area is large and an ion exchange-precipitation mechanism when the interlayer cation can form a highly insoluble carbonate. In contrast, supercritical CH4 does not readily associate with cations, does not react with smectites, and is only incorporated into interlayer slit mesopores when (i) the pore has a z-dimension large enough to accommodate CH4, (ii) the smectite has low charge, and (iii) the H2O activity is low. The adsorption and displacement of CH4 by CO2 and vice versa have been studied on the molecular scale in one shale, but opportunities remain to examine behavioral details in this more complicated, slit-pore inclusive system.

Cobalt substitution slows forsterite carbonation in low-water supercritical carbon dioxide.

Cobalt recovery from low-grade mafic and ultramafic ores could be economically viable if combined with CO2 storage under low-water conditions, but the impact of Co on metal silicate carbonation and the fate of Co during the carbonation reaction must be understood. In this study, in situ infrared spectroscopy was used to investigate the carbonation of Co-doped forsterite ((Mg,Co)2SiO4) in thin water films in humidified supercritical CO2 at 50 °C and 90 bar. Rates of carbonation of Co-doped forsterite to Co-rich magnesite ((Mg,Co)CO3) increased with water film thickness but were at least 10 times smaller than previously measured for pure forsterite at similar conditions. We suggest that the smaller rates are due to thermodynamic drivers that cause water films on Co-doped forsterite to be much less oversaturated with respect to Co-doped magnesite, compared to the pure minerals.

In situ imaging of amorphous intermediates during brucite carbonation in supercritical CO2.

Progress in understanding crystallization pathways depends on the ability to unravel relationships between intermediates and final crystalline products at the nanoscale, which is a particular challenge at elevated pressure and temperature. Here we exploit a high-pressure atomic force microscope to directly visualize brucite carbonation in water-bearing supercritical carbon dioxide (scCO2) at 90 bar and 50 °C. On introduction of water-saturated scCO2, in situ visualization revealed initial dissolution followed by nanoparticle nucleation consistent with amorphous magnesium carbonate (AMC) on the surface. This is followed by growth of nesquehonite (MgCO3·3H2O) crystallites. In situ imaging provided direct evidence that the AMC intermediate acts as a seed for crystallization of nesquehonite. In situ infrared and thermogravimetric-mass spectrometry indicate that the stoichiometry of AMC is MgCO3·xH2O (x = 0.5-1.0), while its structure is indicated to be hydromagnesite-like according to density functional theory and X-ray pair distribution function analysis. Our findings thus provide insight for understanding the stability, lifetime and role of amorphous intermediates in natural and synthetic systems.

Interlayer Cation Polarizability Affects Supercritical Carbon Dioxide Adsorption by Swelling Clays.

Several strategies for mitigating the build-up of atmospheric carbon dioxide (CO2) bring wet supercritical CO2 (scCO2) in contact with phyllosilicates such as illites and smectites. While some work has examined the role of the charge-balancing cation and smectite framework features on CO2/smectite interactions, to our knowledge no one has examined how the polarizability of the charge-balancing cation influences these behaviors. In this paper, the scCO2 adsorption properties of Pb2+, Rb+, and NH4+ saturated smectite clays at variable relative humidity are studied by integrating in situ high-pressure X-ray diffraction (XRD), infrared spectroscopic titrations, and magic angle spinning nuclear magnetic resonance (MAS NMR) methods. The results are combined with previously published data for Na+, Cs+, and Ca2+ saturated versions of the same smectites to isolate the roles of the charge-balancing cations and perform two independent tests of the role of charge-balancing cation polarizability in determining the interlayer fluid properties and smectite expansion. Independent correlations developed for (i) San Bernardino hectorite (SHCa-1) and (ii) Wyoming montmorillonite (SWy-2) both show that cation polarizability is important in predicting the interlayer composition (mol% CO2 in the interlayer fluid and CO2/cation ratio in interlayer) and the expansion behavior for smectites in contact with wet and dry scCO2. In particular, this study shows that the charge-balancing cation polarizability is the most important cation-associated parameter in determining the expansion of the trioctahedral smectite, hectorite, when in contact with dry scCO2. While both independent tests show that cation polarizability is an important factor in smectite-scCO2 systems, the correlations for hectorite are different from those determined for montmorillonite. The root of these differences is likely associated with the roles of the smectite framework on adsorption, warranting follow-up studies with a larger number of unique smectite frameworks. Overall, the results show that the polarizability of the charge-balancing cation should be considered when preparing smectite clays (or industrial processes involving smectites) to capture CO2 and in predicting the behavior of caprocks over time.

Thin Water Films Enable Low-Temperature Magnesite Growth Under Conditions Relevant to Geologic Carbon Sequestration.

Injecting supercritical CO2 (scCO2) into basalt formations for long-term storage is a promising strategy for mitigating CO2 emissions. Mineral carbonation can result in permanent entrapment of CO2; however, carbonation kinetics in thin H2O films in humidified scCO2 is not well understood. We investigated forsterite (Mg2SiO4) carbonation to magnesite (MgCO3) via amorphous magnesium carbonate (AMC; MgCO3·xH2O, 0.5 < x < 1), with the goal to establish the fundamental controls on magnesite growth rates at low H2O activity and temperature. Experiments were conducted at 25, 40, and 50 °C in 90 bar CO2 with a H2O film thickness on forsterite that averaged 1.78 ± 0.05 monolayers. In situ infrared spectroscopy was used to monitor forsterite dissolution and the growth of AMC, magnesite, and amorphous SiO2 as a function of time. Geochemical kinetic modeling showed that magnesite was supersaturated by 2 to 3 orders of magnitude and grew according to a zero-order rate law. The results indicate that the main drivers for magnesite growth are sustained high supersaturation coupled with low H2O activity, a combination of thermodynamic conditions not attainable in bulk aqueous solution. This improved understanding of reaction kinetics can inform subsurface reactive transport models for better predictions of CO2 fate and transport.

Synergistic Coupling of CO2 and H2O during Expansion of Clays in Supercritical CO2-CH4 Fluid Mixtures.

We used IR and XRD, with supporting theoretical calculations, to investigate the swelling behavior of Na+-, NH4+-, and Cs+-montmorillonites (SWy-2) in supercritical fluid mixtures of H2O, CO2, and CH4. Building on our prior work with Na-clay that demonstrated that H2O facilitated CO2 intercalation at relatively low RH, here we show that increasing CO2/CH4 ratios promote H2O intercalation and swelling of the Na-clay at progressively lower RH. In contrast to the Na-clay, CO2 intercalated and expanded the Cs-clay even in the absence of H2O, while increasing fluid CO2/CH4 ratios inhibited H2O intercalation. The NH4-clay displayed intermediate behavior. By comparing changes in the HOH bending vibration of H2O intercalated in the Cs-, NH4-, and Na-clays, we posit that CO2 facilitated expansion of the Na-clay by participating in outer-sphere solvation of Na+ and by disrupting the H-bond network of intercalated H2O. In no case did the pure CH4 fluid induce expansion. Our experimental data can benchmark modeling studies aimed at predicting clay expansion in humidified fluids with varying ratios of CO2 and CH4 in real reservoir systems with implications for enhanced hydrocarbon recovery and CO2 storage in subsurface environments.

Critical Water Coverage during Forsterite Carbonation in Thin Water Films: Activating Dissolution and Mass Transport.

In geologic carbon sequestration, CO2 is injected into geologic reservoirs as a supercritical fluid (scCO2). The carbonation of divalent silicates exposed to humidified scCO2 occurs in angstroms to nanometers thick adsorbed H2O films. A threshold H2O film thickness is required for carbonate precipitation, but a mechanistic understanding is lacking. In this study, we investigated carbonation of forsterite (Mg2SiO4) in humidified scCO2 (50 °C and 90 bar), which serves as a model system for understanding subsurface divalent silicate carbonation reactivity. Attenuated total reflection infrared spectroscopy pinpointed that magnesium carbonate precipitation begins at 1.5 monolayers of adsorbed H2O. At about this same H2O coverage, transmission infrared spectroscopy showed that forsterite dissolution begins and electrical impedance spectroscopy demonstrated that diffusive transport accelerates. Molecular dynamics simulations indicated that the onset of diffusion is due to an abrupt decrease in the free-energy barriers for lateral mobility of outer-spherically adsorbed Mg2+. The dissolution and mass transport controls on divalent silicate reactivity in wet scCO2 could be advantageous for maximizing permeability near the wellbore and minimize leakage through the caprock.

Evidence for Carbonate Surface Complexation during Forsterite Carbonation in Wet Supercritical Carbon Dioxide.

Continental flood basalts are attractive formations for geologic sequestration of carbon dioxide because of their reactive divalent-cation containing silicates, such as forsterite (Mg2SiO4), suitable for long-term trapping of CO2 mineralized as metal carbonates. The goal of this study was to investigate at a molecular level the carbonation products formed during the reaction of forsterite with supercritical CO2 (scCO2) as a function of the concentration of H2O adsorbed to the forsterite surface. Experiments were performed at 50 °C and 90 bar using an in situ IR titration capability, and postreaction samples were examined by ex situ techniques, including scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), focused ion beam transmission electron microscopy (FIB-TEM), thermal gravimetric analysis mass spectrometry (TGA-MS), and magic angle spinning nuclear magnetic resonance (MAS NMR). Carbonation products and reaction extents varied greatly with adsorbed H2O. We show for the first time evidence of Mg-carbonate surface complexation under wet scCO2 conditions. Carbonate is found to be coordinated to Mg at the forsterite surface in a predominately bidentate fashion at adsorbed H2O concentrations below 27 µmol/m(2). Above this concentration and up to 76 µmol/m(2), monodentate coordinated complexes become dominant. Beyond a threshold adsorbed H2O concentration of 76 µmol/m(2), crystalline carbonates continuously precipitate as magnesite, and the particles that form are hundreds of times larger than the estimated thicknesses of the adsorbed water films of about 7 to 15 Å. At an applied level, these results suggest that mineral carbonation in scCO2 dominated fluids near the wellbore and adjacent to caprocks will be insignificant and limited to surface complexation, unless adsorbed H2O concentrations are high enough to promote crystalline carbonate formation. At a fundamental level, the surface complexes and their dependence on adsorbed H2O concentration give insights regarding forsterite dissolution processes and magnesite nucleation and growth.

In situ study of CO2 and H2O partitioning between Na-montmorillonite and variably wet supercritical carbon dioxide.

Shale formations play fundamental roles in large-scale geologic carbon sequestration (GCS) aimed primarily to mitigate climate change and in smaller-scale GCS targeted mainly for CO2-enhanced gas recovery operations. Reactive components of shales include expandable clays, such as montmorillonites and mixed-layer illite/smectite clays. In this study, in situ X-ray diffraction (XRD) and in situ infrared (IR) spectroscopy were used to investigate the swelling/shrinkage and H2O/CO2 sorption of Na(+)-exchanged montmorillonite, Na-SWy-2, as the clay is exposed to variably hydrated supercritical CO2 (scCO2) at 50 °C and 90 bar. Measured d001 values increased in stepwise fashion and sorbed H2O concentrations increased continuously with increasing percent H2O saturation in scCO2, closely following previously reported values measured in air at ambient pressure over a range of relative humidities. IR spectra show H2O and CO2 intercalation, and variations in peak shapes and positions suggest multiple sorbed types of H2O and CO2 with distinct chemical environments. Based on the absorbance of the asymmetric CO stretching band of the CO2 associated with the Na-SWy-2, the sorbed CO2 concentration increases dramatically at sorbed H2O concentrations from 0 to 4 mmol/g. Sorbed CO2 then sharply decreases as sorbed H2O increases from 4 to 10 mmol/g. With even higher sorbed H2O concentrations as saturation of H2O in scCO2 was approached, the concentration of sorbed CO2 decreased asymptotically. Two models, one involving space filling and the other a heterogeneous distribution of integral hydration states, are discussed as possible mechanisms for H2O and CO2 intercalations in montmorillonite. The swelling/shrinkage of montmorillonite could affect solid volume, porosity, and permeability of shales. Consequently, the results may aid predictions of shale caprock integrity in large-scale GCS as well as methane transmissivity in enhanced gas recovery operations.

Mineralization of basalts in the CO2-H2O-SO2-O2 system.

Sequestering carbon dioxide (CO2) containing minor amounts of co-contaminants in geologic formations was investigated in the laboratory through the use of high pressure static experiments. Five different basalt samples were immersed in water equilibrated with supercritical CO2 containing 1 wt % sulfur dioxide (SO2) and 1 wt % oxygen (O2) at reservoir conditions (∼ 100 bar, 90 °C) for 48 and 98 days. Gypsum (CaSO4) was a common precipitate, occurred early as elongated blades with striations, and served as substrates for other mineral products. In addition to gypsum, bimodal pulses of water released during dehydroxylation were key indicators, along with X-ray diffraction, for verifying the presence of jarosite-alunite group minerals. Well-developed pseudocubic jarosite crystals formed surface coatings, and in some instances, mixtures of natrojarosite and natroalunite aggregated into spherically shaped structures measuring 100 µm in diameter. Reaction products were also characterized using infrared spectroscopy, which indicated OH and Fe-O stretching modes. The presences of jarosite-alunite group minerals were found in the lower wavenumber region from 700 to 400 cm(-1). A strong preferential incorporation of Fe(III) into natrojarosite was attributed to the oxidation potential of O2. Evidence of CO2 was detected during thermal decomposition of precipitates, suggesting the onset of mineral carbonation.

In situ molecular spectroscopic evidence for CO2 intercalation into montmorillonite in supercritical carbon dioxide.

The interaction of anhydrous supercritical CO(2) (scCO(2)) with both kaolinite and ~1W (i.e., close to but less than one layer of hydration) calcium-saturated montmorillonite was investigated under conditions relevant to geologic carbon sequestration (50 °C and 90 bar). The CO(2) molecular environment was probed in situ using a combination of three novel high-pressure techniques: X-ray diffraction, magic angle spinning nuclear magnetic resonance spectroscopy, and attenuated total reflection infrared spectroscopy. We report the first direct evidence that the expansion of montmorillonite under scCO(2) conditions is due to CO(2) migration into the interlayer. Intercalated CO(2) molecules are rotationally constrained and do not appear to react with waters to form bicarbonate or carbonic acid. In contrast, CO(2) does not intercalate into kaolinite. The findings show that predicting the seal integrity of caprock will have complex dependence on clay mineralogy and hydration state.

Enzymatic hydrolysis of organic phosphates adsorbed on mineral surfaces.

Esters of phosphoric acid constitute a sizable fraction of the total phosphorus supply in the environment and thus play an important role in the global phosphorus cycle. Enzymatic hydrolysis of these esters to produce orthophosphate is often a required reaction preceding phosphorus uptake by plants and microorganisms. Generally, adsorption to environmental particles is assumed to limit this process. Here we show, however, that the rate of enzymatic hydrolysis of glucose-1-phosphate (G1P) adsorbed on goethite by acid phosphatase (AcPase) can be of the same order of magnitude as in aqueous solution. The surface process releases carbon to the solution whereas orthophosphate remains adsorbed on goethite. This hydrolysis reaction is strictly an interfacial process governed by the properties of the interface. A high surface concentration of substrate mediates the formation of a catalytically active layer of AcPase, and although adsorption likely reduces the catalytic efficiency of the enzyme, this reduction is almost balanced by the fact that enzyme and substrate are concentrated at the mineral surfaces. Our results suggest that mineral surfaces with appropriate surface properties can be very effective in concentrating substrates and enzymes thereby creating microchemical environments of high enzymatic activity. Hence, also strongly adsorbed molecules in soils and aquatic environments may be subjected to biodegradation by extracellular enzymes.

In situ infrared spectroscopic study of brucite carbonation in dry to water-saturated supercritical carbon dioxide.

In geologic carbon sequestration, whereas part of the injected carbon dioxide will dissolve into host brine, some will remain as neat to water saturated supercritical CO(2) (scCO(2)) near the well bore and at the caprock, especially in the short term life cycle of the sequestration site. Little is known about the reactivity of minerals with scCO(2) containing variable concentrations of water. In this study, we used high-pressure infrared spectroscopy to examine the carbonation of brucite (Mg(OH)(2)) in situ over a 24 h reaction period with scCO(2) containing water concentrations between 0% and 100% saturation, at temperatures of 35, 50, and 70 °C, and at a pressure of 100 bar. Little or no detectable carbonation was observed when brucite was reacted with neat scCO(2). Higher water concentrations and higher temperatures led to greater brucite carbonation rates and larger extents of conversion to magnesium carbonate products. The only observed carbonation product at 35 °C was nesquehonite (MgCO(3)·3H(2)O). Mixtures of nesquehonite and magnesite (MgCO(3)) were detected at 50 °C, but magnesite was more prevalent with increasing water concentration. Both an amorphous hydrated magnesium carbonate solid and magnesite were detected at 70 °C, but magnesite predominated with increasing water concentration. The identity of the magnesium carbonate products appears strongly linked to magnesium water exchange kinetics through temperature and water availability effects.

In situ infrared spectroscopic study of forsterite carbonation in wet supercritical CO2.

Carbonation reactions are central to the prospect of CO(2) trapping by mineralization in geologic reservoirs. In contrast to the relevant aqueous-mediated reactions, little is known about the propensity for carbonation in the key partner fluid: supercritical carbon dioxide containing dissolved water ("wet" scCO(2)). We employed in situ mid-infrared spectroscopy to follow the reaction of a model silicate mineral (forsterite, Mg(2)SiO(4)) for 24 h with wet scCO(2) at 50 °C and 180 atm. The results show a dramatic dependence of reactivity on water concentration and the presence of liquid water on the forsterite particles. Exposure to neat scCO(2) showed no detectable carbonation reaction. At 47% and 81% water saturation, an Ångstrom-thick liquid-like water film was detected on the forsterite particles and less than 1% of the forsterite transformed. Most of the reaction occurred within the first 3 h of exposure to the fluid. In experiments at 95% saturation and with an excess of water (36% above water saturation), a nanometer-thick water film was detected, and the carbonation reaction proceeded continuously with approximately 2% and 10% conversion, respectively. Our collective results suggest constitutive links between water concentration, water film formation, reaction rate and extent, and reaction products in wet scCO(2).

The controlling role of atmosphere in dawsonite versus gibbsite precipitation from tetrahedral aluminate species.

In highly alkaline solution, aluminum speciates as the tetrahedrally coordinated aluminate monomer, Al(OH)4- and/or dimer Al2O(OH)62-, yet precipitates as octahedrally coordinated gibbsite (Al(OH)3). This tetrahedral to octahedral transformation governs Al precipitation, which is crucial to worldwide aluminum (Al) production, and to the retrieval and processing of Al-containing caustic high-level radioactive wastes. Despite its significance, the transformation pathway remains unknown. Here we explore the roles of atmospheric water and carbon dioxide in mediating the transformation of the tetrahedrally coordinated potassium aluminate dimer salt (K2Al2O(OH)6) to gibbsite versus potassium dawsonite (KAl(CO3)(OH)2). A combination of in situ attenuated total reflection infrared spectroscopy, ex situ micro X-ray diffraction, and multivariate curve resolution-alternating least squares chemometrics analysis reveals that humidity plays a key role in the transformation by limiting the amount of alkalinity neutralization by dissolved CO2. Lower humidity favors higher alkalinity and incorporation of carbonate species in the final Al product to form KAl(CO3)(OH)2. Higher humidity enables more acid generation that destabilizes dawsonite and favors gibbsite as the solubility limiting phase. This indicates that the transition from tetra- to octahedrally coordinated Al does not have to occur in bulk solution, as has often been hypothesized, but may instead occur in thin water films present on mineral surfaces in humid environments. Our findings suggest that phase selection can be controlled by humidity, which could enable new pathways to Al transformations useful to the Al processing industry, as well as improved understanding of phases that appear in caustic Al-bearing solutions exposed to atmospheric conditions.

Integrated atomic force microscopy and x-ray irradiation for in situ characterization of radiation-induced processes.

Understanding radiation-induced chemical and physical transformations at material interfaces is important across diverse fields, but experimental approaches are often limited to either ex situ observations or in situ electron microscopy or synchrotron-based methods, in which cases the radiation type and dose are inextricably tied to the imaging basis itself. In this work, we overcome this limitation by demonstrating integration of an x-ray source with an atomic force microscope to directly monitor radiolytically driven interfacial chemistry at the nanoscale. We illustrate the value of in situ observations by examining effects of radiolysis on material adhesion forces in aqueous solution as well as examining the production of alkali nitrates at the interface between an alkali halide crystal surface and air. For the examined salt-air interface, direct visualization under flexible experimental conditions greatly extends prior observations by enabling the transformation process to be followed comprehensively from source-to-sink with mass balance quantitation. Our novel rad-atomic force microscope opens doors into understanding the dynamics of radiolytically driven mass transfer and surface alteration at the nanoscale in real-time.

Direct visualization of radiation-induced transformations at alkali halide-air interfaces.

Radiation driven reactions at mineral/air interfaces are important to the chemistry of the atmosphere, but experimental constraints (e.g. simultaneous irradiation, in situ observation, and environmental control) leave process understanding incomplete. Using a custom atomic force microscope equipped with an integrated X-ray source, transformation of potassium bromide surfaces to potassium nitrate by air radiolysis species was followed directly in situ at the nanoscale. Radiolysis initiates dynamic step edge dissolution, surface composition evolution, and ultimately nucleation and heteroepitaxial growth of potassium nitrate crystallites mediated by surface diffusion at rates controlled by adsorbed water. In contrast to in situ electron microscopy and synchrotron-based imaging techniques where high radiation doses are intrinsic, our approach illustrates the value of decoupling irradiation and the basis of observation.

Adsorption, desorption, and surface-promoted hydrolysis of glucose-1-phosphate in aqueous goethite (α-FeOOH) suspensions.

Adsorption, desorption, and precipitation reactions at environmental interfaces govern the fate of phosphorus in terrestrial and aquatic environments. Typically, a substantial part of the total pool of phosphorus consists of organophosphate, and in this study we have focused on the interactions between glucose-1-phosphate (G1P) and goethite (α-FeOOH) particles. The adsorption and surface-promoted hydrolysis reactions have been studied at room temperature as a function of pH, time, and total concentration of G1P by means of quantitative batch experiments in combination with infrared spectroscopy. A novel simultaneous infrared and potentiometric titration (SIPT) technique has also been used to study the rates and mechanisms of desorption of the surface complexes. The results have shown that G1P adsorption occurs over a wide pH interval and at pH values above the isoelectric point of goethite (IEP(goethite) = 9.4), indicating a comparatively strong interaction with the particle surfaces. As evidenced by IR spectroscopy, G1P formed pH-dependent surface complexes on goethite, and investigations of both adsorption and desorption processes were consistent with a model including three types of surface complexes. These complexes interact monodentately with surface Fe but differ in hydrogen bonding interactions via the auxiliary oxygens of the phosphate group. The apparent desorption rates were shown to be influenced by reaction pathways that include interconversion of surface species, which highlights the difficulty in determining the intrinsic desorption rates of individual surface complexes. Desorption results have also indicated that the molecular structures of surface complexes and the surface charge are two important determinants of G1P desorption rates. Finally, this study has shown that surface-promoted hydrolysis of G1P by goethite is base-catalyzed but that the extent of hydrolysis was small.

Low temperature and limited water activity reveal a pathway to magnesite via amorphous magnesium carbonate.

Forsterite carbonated in thin H2O films to magnesite via amorphous magnesium carbonate during reaction with H2O-bearing liquid CO2 at 25 °C. This novel reaction pathway contrasts with previous studies that were carried out at higher H2O activity and temperature, where more highly hydrated nesquehonite was the metastable intermediate.