Error Resilient Coding Techniques for Video Delivery over Vehicular Networks.

Nowadays, more and more vehicles are equipped with communication capabilities, not only providing connectivity with onboard devices, but also with off-board communication infrastructures. From road safety (i.e., multimedia e-call) to infotainment (i.e., video on demand services), there are a lot of applications and services that may be deployed in vehicular networks, where video streaming is the key factor. As it is well known, these networks suffer from high interference levels and low available network resources, and it is a great challenge to deploy video delivery applications which provide good quality video services. We focus our work on supplying error resilience capabilities to video streams in order to fight against the high packet loss rates found in vehicular networks. So, we propose the combination of source coding and channel coding techniques. The former ones are applied in the video encoding process by means of intra-refresh coding modes and tile-based frame partitioning techniques. The latter one is based on the use of forward error correction mechanisms in order to recover as many lost packets as possible. We have carried out an extensive evaluation process to measure the error resilience capabilities of both approaches in both (a) a simple packet error probabilistic model, and (b) a realistic vehicular network simulation framework. Results show that forward error correction mechanisms are mandatory to guarantee video delivery with an acceptable quality level , and we highly recommend the use of the proposed mechanisms to increase even more the final video quality.

Source Coding Options to Improve HEVC Video Streaming in Vehicular Networks.

Video delivery in Vehicular Ad-hoc NETworks has a great number of applications. However, multimedia streaming over this kind of networks is a very challenging issue because (a) it is one of the most resource-demanding applications; (b) it requires high bandwidth communication channels; (c) it shows moderate to high node mobility patterns and (d) it is common to find high communication interference levels that derive in moderate to high loss rates. In this work, we present a simulation framework based on OMNeT++ network simulator, Veins framework, and the SUMO mobility traffic simulator that aims to study, evaluate, and also design new techniques to improve video delivery over Vehicular Ad-hoc NETworks. Using the proposed simulation framework we will study different coding options, available at the HEVC video encoder, that will help to improve the perceived video quality in this kind of networks. The experimental results show that packet losses significantly reduce video quality when low interference levels are found in an urban scenario. By using different INTRA refresh options combined with appropriate tile coding, we will improve the resilience of HEVC video delivery services in VANET urban scenarios.

Underwater Wireless Sensor Networks: how do acoustic propagation models impact the performance of higher-level protocols?

Several Medium Access Control (MAC) and routing protocols have been developed in the last years for Underwater Wireless Sensor Networks (UWSNs). One of the main difficulties to compare and validate the performance of different proposals is the lack of a common standard to model the acoustic propagation in the underwater environment. In this paper we analyze the evolution of underwater acoustic prediction models from a simple approach to more detailed and accurate models. Then, different high layer network protocols are tested with different acoustic propagation models in order to determine the influence of environmental parameters on the obtained results. After several experiments, we can conclude that higher-level protocols are sensitive to both: (a) physical layer parameters related to the network scenario and (b) the acoustic propagation model. Conditions like ocean surface activity, scenario location, bathymetry or floor sediment composition, may change the signal propagation behavior. So, when designing network architectures for UWSNs, the role of the physical layer should be seriously taken into account in order to assert that the obtained simulation results will be close to the ones obtained in real network scenarios.

Monitoring pest insect traps by means of low-power image sensor technologies.

Monitoring pest insect populations is currently a key issue in agriculture and forestry protection. At the farm level, human operators typically must perform periodical surveys of the traps disseminated through the field. This is a labor-, time- and cost-consuming activity, in particular for large plantations or large forestry areas, so it would be of great advantage to have an affordable system capable of doing this task automatically in an accurate and a more efficient way. This paper proposes an autonomous monitoring system based on a low-cost image sensor that it is able to capture and send images of the trap contents to a remote control station with the periodicity demanded by the trapping application. Our autonomous monitoring system will be able to cover large areas with very low energy consumption. This issue would be the main key point in our study; since the operational live of the overall monitoring system should be extended to months of continuous operation without any kind of maintenance (i.e., battery replacement). The images delivered by image sensors would be time-stamped and processed in the control station to get the number of individuals found at each trap. All the information would be conveniently stored at the control station, and accessible via Internet by means of available network services at control station (WiFi, WiMax, 3G/4G, etc.).

Performance Overview of the Latest Video Coding Proposals: HEVC, JEM and VVC.

The audiovisual entertainment industry has entered a race to find the video encoder offering the best Rate/Distortion (R/D) performance for high-quality high-definition video content. The challenge consists in providing a moderate to low computational/hardware complexity encoder able to run Ultra High-Definition (UHD) video formats of different flavours (360°, AR/VR, etc.) with state-of-the-art R/D performance results. It is necessary to evaluate not only R/D performance, a highly important feature, but also the complexity of future video encoders. New coding tools offering a small increase in R/D performance at the cost of greater complexity are being advanced with caution. We performed a detailed analysis of two evolutions of High Efficiency Video Coding (HEVC) video standards, Joint Exploration Model (JEM) and Versatile Video Coding (VVC), in terms of both R/D performance and complexity. The results show how VVC, which represents the new direction of future standards, has, for the time being, sacrificed R/D performance in order to significantly reduce overall coding/decoding complexity.