Nematic-to-Isotropic Phase Transition in Poly(L-Lactide) with Addition of Cyclodextrin during Abiotic Degradation Study.

Poly(L-lactide) is capable of self-assembly into a nematic mesophase under the influence of temperature and mechanical stresses. Therefore, subsequent poly(L-lactide) films were obtained and characterized, showing nematic liquid crystal properties both before and after degradation. Herein, we present that, by introducing ß-cyclodextrin into the polymer matrix, it is possible to obtain a chiral nematic mesophase during pressing, regardless of temperature and time. The obtained poly(L-lactide) films exhibiting liquid crystal properties were subjected to degradation tests and the influence of degradation on these properties was determined. Thermotropic phase behavior was investigated using polarized optical microscopy, X-ray diffraction, and differential scanning calorimetry. The degradation process demonstrated an influence on the liquid crystal properties of pressed polymer films. The colored planar texture of the chiral nematic mesophase, which was not observed prior to degradation in films without the addition of ß-cyclodextrin, appeared after incubation in water as a result of the entrapment of degradation products in the polymer matrix. These unusual tailor-made properties, obtained in liquid crystals in (bio)degradable polymers using a simple method, demonstrate the potential for advanced photonic applications.

Designing Biodegradable Wafers Based on Poly(L-lactide-co-glycolide) and Poly(glycolide-co-ε-caprolactone) for the Prolonged and Local Release of Idarubicin for the Therapy of Glioblastoma Multiforme.

PURPOSE: The blood-brain barrier limits the application of idarubicin in the therapy of glioblastoma multiforme. Biodegradable, intracranial wafers with prolonged release may increase therapy efficiency. METHODS: Blank wafers, wafers containing 5% w/w and 10% w/w of idarubicin were formulated by solution casting from poly(L-lactide-co-glycolide) and poly(glycolide-co-ε-caprolactone). The following methods were used: NMR, GPC, DSC, FTIR, AFM, UV-VIS, and a viability and proliferation assay for idarubicin action (U87MG cell line). RESULTS: Wafers showed a surface with numerous immersions and hills. A lack of interactions between idarubicin and the copolymers was observed. The substance was entrapped in the matrix and released in two phases for all wafers with the appropriate bolus and maintenance dose. The burst effect was observed for all wafers, however, the biggest bolus for poly(L-lactide-co-glycolide) wafers containing 5% w/w of idarubicin was noted. The stable and steady degradation of poly(glycolide-co-ε-caprolactone) wafers containing 5% w/w of idarubicin ensures the most optimal release profile and high inhibition of proliferation. CONCLUSIONS: Copolymer wafers with idarubicin are an interesting proposition with great potential for the local treatment of glioblastoma multiforme. The release rate and dose may be regulated by the amount and kind of wafers for various effects.

Towards scalable and degradable bioplastic films from Moringa oleifera gum/poly(vinyl alcohol) as packaging material.

The use of plant gum-based biodegradable bioplastic films as a packaging material is limited due to their poor physicochemical properties. However, combining plant gum with synthetic degradable polymer and some additives can improve these properties. Keeping in view, the present study aimed to synthesize a series of bioplastic films using Moringa oleifera gum, polyvinyl alcohol, glycerol, and citric acid via thermal treatment followed by a solution casting method. The films were characterized using analytical techniques such as FTIR, XRD, SEM, AFM, TGA, and DSC. The study examined properties such as water sensitivity, gas barrier attributes, tensile strength, the shelf life of food, and biodegradability. The films containing higher citric acid amounts showed appreciable %elongation without compromising tensile strength, good oxygen barrier properties, and biodegradation rates (>95%). Varying the amounts of glycerol and citric acid in the films broadened their physicochemical properties ranging from hydrophilicity to hydrophobicity and rigidity to flexibility. As all the films were synthesized using economical and environmentally safe materials, and showed better physicochemical and barrier properties, this study suggests that these bioplastic films can prove to be a potential alternative for various packaging applications.

Oligopeptide-based molecular labelling of (bio)degradable polyester biomaterials.

Nowadays, a very important motivation for the development of new functional materials for medical purposes is not only their performance but also whether they are environmentally friendly. In recent years, there has been a growing interest in the possibility of labelling (bio)degradable polymers, in particular those intended for specific applications, especially in the medical sector, and the potential of information storage in such polymers, making it possible, for example, to track the ultimate environmental fate of plastics. This article presents a straightforward green approach that combines both aspects using an oligopeptide, which is an integral part of polymer material, to store binary information in a physical mixture of polymer and oligopeptide. In the proposed procedure the year of production of polymer films made of poly(l-lactide) (PLLA) and a blend of poly(1,4-butylene adipate-co-1,4-butylene terephthalate) and polylactide (PBAT/PLA) were encoded as the sequence of the appropriate amino acids in the oligopeptide (PEP) added to these polymers. The decoding of the recorded information was carried out using mass spectrometry technique as a new method of decoding, which enabled the successful retrieval and reading of the stored information. Furthermore, the properties of labelled (bio)degradable polymer films and stability during biodegradation of PLLA/PEP film under industrial composting conditions have been investigated. The labelled films exhibited good oligopeptide stability, allowing the recorded information to be retrieved from a green polymer/oligopeptide system before and after biodegradation. The MTT (3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl-2H-tetrazolium bromide assay) study of the PLLA and PLLA/PBAT using the MRC-5 mammalian fibroblasts was presented for the first time.

Synthesis and characterisation of PEG-peptide surfaces for proteolytic enzyme detection.

Peptide surfaces were obtained by the covalent immobilisation of fluorescently labelled pentapeptides carboxyfluorescein-glycine-arginine-methionine-leucine-glycine, either directly or through a poly(ethylene glycol) (PEG) linker on modified silicon wafers. Each step during the preparation of the peptide surfaces was confirmed by several surface characterisation techniques. Time-of-flight secondary ion mass spectrometry (ToF-SIMS) and X-ray photoelectron spectroscopy were used to determine the surface composition, the wafers philicity was measured by contact angle and atomic force microscopy was used to investigate the surface morphology. Exposure of the peptide surfaces to trypsin resulted in the release of a fluorescently labelled peptide product, which allowed the kinetics of the enzymatic reaction to be followed with the aid of fluorescence spectroscopy. The electrospray ionisation mass spectrometry analysis of the post-digestion solution confirmed that the pentapeptides attached to the solid support undergo specific trypsin hydrolysis at the C-terminus of the arginine residues. Detailed surface analyses before and after the enzyme action was performed using ToF-SIMS. Because of the limited accessibility of the short peptide directly attached to the surface, a quantitative yield of enzymatic hydrolysis was observed only in case when the peptide was bound through the PEG linker. The insertion of the PEG linker increased the number of immobilised peptides and the rate of enzymatic digestion which consequently improved the quality of the enzyme assays. The described approach may be used for different peptide sequences designed for other proteases.

Poly(l-Lactide) Liquid Crystals with Tailor-Made Properties Toward a Specific Nematic Mesophase Texture.

This paper presents the liquid crystal (LC) properties of poly(l-lactide) (PLLA). Mesophase behavior is investigated using polarized optical microscopy, X-ray diffraction, and differential scanning calorimetry. The performed analyses confirm that pressed PLLA films exhibit the unique capability of self-assembling into a nematic mesophase under the influence of mechanical pressure, temperature, and time. It was originally demonstrated that the chiral nematic mesophase can be obtained by introducing fine powders into the polymer. Based on the research conducted, it was proved that the pressed PLLA films have a chiral nematic mesophase with a nematic-to-isotropic phase transition and a large mesophase stability range overlapping the temperature of the human body, which can persist for years at ambient temperature. The obtained films show tailor-made properties toward a nematic mesophase with a specific texture, including colored planar texture of the chiral nematic mesophase and blue-phase (BP) LC texture. The BP, described for the first time in plain PLLA, occurred over a wider than usual temperature range of stability between isotropic and chiral nematic thermotropic phases (ΔT ≈ 9 °C), which is an advantage of the obtained polymer material, in addition to ease of preparation. This opens up new prospects for advanced photonic green applications.

Polyimide-Based Membrane Materials for CO2 Separation: A Comparison of Segmented and Aromatic (Co)polyimides.

A series of new poly(ethylene oxide) (PEO)-based copolyimides varying in hard segment structure are reported in this work as CO2 selective separation membranes. Their structural diversity was achieved by using different aromatic dianhydrides (4,4'-oxydiphthalic anhydride (ODPA), 4,4'-(hexafluoroisopropylidene)diphthalic anhydride (6FDA)) and diamines (4,4'-oxydianiline (ODA), 4,4'-(4,4'-isopropylidene-diphenyl-1,1'- diyldioxy)dianiline (IPrDA), 2,3,5,6-tetramethyl-1,4-phenylenediamine (4MPD)), while keeping the content of PEO (2000 g/mol) constant (around 50%). To get a better insight into the effects of hard segment structure on gas transport properties, a series of aromatic polyimides with the same chemistry was also studied. Both series of polymers were characterized by 1HNMR, FTIR, WAXD, DSC, TGA, and AFM. Permeabilities for pure He, O2, N2, and CO2 were determined at 6 bar and at 30 °C, and for CO2 for pressures ranging from 1 to 10 bar. The results show that OPDA-ODA-PEO is the most permeable copolyimide, with CO2 permeability of 52 Barrer and CO2/N2 selectivity of 63, in contrast to its fully aromatic analogue, which was the least permeable among polyimides. 6FDA-4MPD-PEO ranks second, with a two times lower CO2 permeability and slightly lower selectivity, although 6FDA-4MPD was over 900 times more permeable than OPDA-ODA. As an explanation, partial filling of hard domain free voids by PEO segments and imperfect phase separation were proposed.

Development of antibacterial, ciprofloxacin-eluting biodegradable coatings on Ti6Al7Nb implants to prevent peri-implant infections.

Various types of biodegradable polymers containing lactide, glycolide, caprolactone, and trimethylene carbonate units have been used to obtain ciprofloxacin (CFX)-enriched coatings developed on the Ti6Al7Nb alloy, intended for short-term therapy. In the first step, the surface of the Ti6Al7Nb alloy was modified, mostly according to sandblasting and anodic oxidation to obtain the TiO2 layer. Anodizing can be an effective method for preparing TiO2 coatings with osteoconductive properties. The polymer containing CFX molecules was deposited on the modified alloy, and Polymer + CFX/TiO 2 /Ti6Al7Nb systems were developed. CFX-enriched coatings adhered well to the surface of the previously modified alloy. Polymer layers maintain the topography of the alloy due to the development of the surface during the sandblasting method. As polymers intended for the study possess degradation ability, they are capable of releasing the incorporated drug. Antibacterial activity of CFX-enriched coatings was examined to verify the functionality of designed Polymer + CFX/TiO 2 /Ti6Al7Nb systems, and the bactericidal effect was confirmed for all cases. The presented study is an extension of previous, initial research and creates an overview of polyester or polyestercarbonate CFX-eluting coatings.

Poly(2-oxazoline) Matrices with Temperature-Dependent Solubility-Interactions with Water and Use for Cell Culture.

In this work, we studied the stability of matrices with temperature-dependent solubility and their interactions with water at physiological temperature for their application in cell culture in vitro. Gradient copolymers of 2-isopropyl- with 2-n-propyl-2-oxazoline (P(iPrOx-nPrOx)) were used to prepare the matrices. The comonomer ratio during polymerization was chosen such that the cloud point temperature (TCP) of the copolymer was below 37 °C while the glass transition (Tg) was above 37 °C. The role of the support for matrices in the context of their stability in aqueous solution was examined. Therefore, matrices in the form of both self-supported bulk polymer materials (fibrillar mats and molds) and polymer films supported on the silica slides were examined. All of the matrices remained undissolved when incubated in water at a temperature above TCP. For the self-supported mats and molds, we observed the loss of shape stability, but, in the case of films supported on silica slides, only slight changes in morphology were observed. For a more in-depth investigation of the origin of the shape deformation of self-supported matrices, we analyzed the wettability, thickness, and water uptake of films on silica support because the matrices remained undeformed under these conditions. It was found that, above the TCP of P(iPrOx-nPrOx), the wettability of the films decreased, but at the same time the films absorbed water and swelled. We examined how this specific behavior of the supported films influenced the culture of fibroblasts. The temperature-dependent solubility of the matrices and the possibility of noninvasive cell separation were also examined.

PEO-b-PCL grafted niosomes: The cooperativilty of amphiphilic components and their properties in vitro and in vivo.

Niosomes belong to drug delivery systems and consist mainly of non-ionic surfactants and cholesterol. In this study, we designed and developed systems composed of non-ionic surfactants i.e. Tween 80, Span 80 and cholesterol with and without poly(ethylene oxide)-b-poly(ε-caprolactone) (PEO-b-PCL) block copolymer, using different molar ratios of the above components. The nanosystems were formed by the thin-film hydration method with purified water as dispersion medium. Several physicochemical techniques were utilized in order to study the physicochemical and morphological characteristics of the prepared assemblies. The results showed that the presence of the block copolymer alters significantly the size and morphology of neat surfactant/cholesterol niosomes. The ageing studies also revealed that the stability is strongly dependent on the nature and the molar ratios of the components. Moreover, neither of the studied nanosystems exhibited elevated signs of cellular toxicity in vitro nor acute systemic toxicity in vivo short-term experiments. This investigation covers a new field of drug delivery platforms those of niosomes composed by different biomaterials i.e. surfactants and block copolymers.

Atomic force microscopy in the production of a biovital skin graft based on human acellular dermal matrix produced in-house and in vitro cultured human fibroblasts.

The most efficient method in III° burn treatment is the use of the autologous split thickness skin grafts that were donated from undamaged body area. The main limitation of this method is lack of suitable donor sites. Tissue engineering is a useful tool to solve this problem. The goal of this study was to find the most efficient way of producing biovital skin substitute based on in house produced acellular dermal matrix ADM and in vitro cultured fibroblasts. Sixty samples of sterilized human allogeneic skin (that came from 10 different donors) were used to examine the influence of decellularizing substances on extracellular matrix and clinical usefulness of the test samples of allogeneic human dermis. Six groups of acellular dermal matrix were studied: ADM-1 control group, ADM-2 research group (24 h incubation in 0.05% trypsin/EDTA solution), ADM-3 research group (24 h incubation in 0.025% trypsin/EDTA solution), ADM-4 research group (24 h incubation in 0.05% trypsin/EDTA solution and 4 h incubation in 0,1% SDS), ADM-5 research group (24 h incubation in 0.025% trypsin/EDTA solution and 4 h incubation in 0,1% SDS), and ADM-6 research group (24 h incubation in 0,1% SDS). Obtained ADMs were examined histochemically and by atomic force microscopy (AFM). ADMs were settled by human fibroblasts. The number of cultured cells and their vitality were measured. The obtained results indicated that the optimal method for production of living skin substitutes is colonization of autologous fibroblasts on the scaffold prepared by the incubation of human allogeneic dermis in 0.05% trypsin/EDTA. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 106B: 726-733, 2018.

Corrosion resistance of PLGA-coated biomaterials.

The aim of the study was to determine the influence of PLGA bioresorbable polymer coating on corrosion resistance of metal biomaterial. Polymer coating deposited by immersion method was applied. Corrosion resistance of metal biomaterials (stainless steel, Ti6Al4V, Ti6Al7Nb) coated with PLGA polymer, after 90 days exposure to Ringer's solution was tested. The amount of metal ions released to the solution was also investigated (inductively coupled plasma-atomic emission spectrometry (ICP-AES) method). The surface of the samples was observed using atomic force microscopy (AFM) and scanning electron microscopy (SEM). Degradation of PLGA was monitored with the use of the 1H NMR spectroscopy and GPC (Gel Permeation Chromatography). The studies were carried out for non-sterilized (NS) and sterilized (S) samples. Application of the polymer coating causes a reduction of release of metal ions to the solution. Depending on metal substrate different course of destruction of polymer layer was observed. After 90 days of incubation in Ringer's solution polymer layer was highly degraded, however, the composition of copolymer (ratio of the comonomeric units in the chain) remained unchanged during the whole process, which suggests even degradation. The polymer layer reduced degradation kinetics of the metal substrate. Moreover, degradation process did not change surface morphology of metal substrate and did not disturb its integrity. The results obtained indicate that the applied polymer layer improves corrosion resistance of the alloys being investigated. Thus, the developed implants with bioresorbable coatings could be advantageous for medical applications.

Multidrug PLA-PEG filomicelles for concurrent delivery of anticancer drugs-The influence of drug-drug and drug-polymer interactions on drug loading and release properties.

This study aimed to analyze the influence of drug-drug and drug-polymer interactions on drug loading and release properties of multidrug micelles. Three hydrophobic drugs-paclitaxel (Ptx), 17-AAG and rapamycin (Rap) were incorporated in poly(l-lactide)-poly(ethylene glycol) (PLA-PEG) filomicelles. Double loaded micelles containing Ptx and 17-AAG were used for the sake of comparison. (1)H NMR confirmed the effective incorporation of the various drugs in micelles, and HPLC allowed to determine the drug loading contents. FTIR was used to evaluate interactions between particular drugs and between drugs and copolymer. Ptx and 17-AAG present similar loading efficiencies in double loaded micelles probably due to interactions of drugs with each other and also with the copolymer. In contrast, unequal drug loading properties are observed for triple loaded micelles. Rapamycin shows very weak interactions with the copolymer, and displays the lowest loading efficiency. In vitro release of drugs from micelles was realized in pH 7.4 phosphate buffered saline at 37°C, and monitored by HPLC. Similar release profiles are observed for the three drugs: a strong burst followed by slower release. Nevertheless, Ptx release from micelles is significantly slower as compared to 17-AAG and Rap, probably due to interactions of NH and OH groups of Ptx with the carbonyl group of PLA. In vitro cytotoxicity of Ptx/17-AAG/Rap loaded micelles and a mixture of free drugs was determined. Drug loaded micelles exhibit advantageous effect of prolonged drug release and cytotoxic activity against Caco-2 cells, which makes them a promising solution for simultaneous drug delivery to solid tumors. Therefore, understanding of interactions within multidrug micelles should be a valuable approach for the development of concurrent delivery systems of anticancer drugs with tailored properties.

Chimeric lipid/block copolymer nanovesicles: Physico-chemical and bio-compatibility evaluation.

Chimeric systems are mixed nanovectors composed by different in nature materials and exhibit new functionalities and properties. The particular chimeric nanovectors, formed by the co-assembly of low and high molecular weight amphiphiles, have the potential to be utilized as drug delivery platforms. We have utilized two lipids, l-α-phosphatidylcholine, hydrogenated (Soy)(HSPC) and 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC), and a poly(oligoethylene glycol acrylate)-b-poly(lauryl acrylate) (POEGA-PLA) block copolymer, at different molar ratios, in aqueous media. Light scattering, differential scanning calorimetry (DSC) and imaging techniques (cryo-TEM, AFM) were employed in order to elucidate the structure and properties of the nanostructures, as well as the cooperativity between the components. DSC experiments showed considerable interaction of the block copolymer with the lipid bilayers and suggested an inhomogeneous distribution of the copolymer chains and lateral phase separation of the components. Vesicle formation was observed in most cases by cryo-TEM with a chimeric membrane exhibiting kinks, in accordance with DSC data. A series of biocompatibility experiments indicated good in vitro biological stability and low cytotoxicity in vivo of the novel nanocarriers. Finally, ibuprofen (IBU) was used as model drug in order to study the loading and the release properties of the prepared chimeric lipid/block copolymer vesicles.

Self-assembled filomicelles prepared from polylactide/poly(ethylene glycol) block copolymers for anticancer drug delivery.

Bioresorbable filomicelles present many advantageous as drug delivery systems e.g., long circulation time and high loading efficiency. The aim of this study was to develop polylactide/poly(ethylene glycol) (PLA/PEG) filomicelles for drug delivery applications. A series of PLA/PEG diblock copolymers were synthesized using non-toxic initiator, and characterized by means of NMR and GPC. Analysis of morphology of micelles determined by TEM revealed that apart from the weight fraction also the molar mass of PEG and the stereochemistry of PLA block must be considered for tailoring micellar structures. The CMC was found to be dependent on the length and structure of the hydrophobic block. It was observed that the drug loading properties could be improved by selection of appropriate copolymer and encapsulation method. Slower release of paclitaxel was observed for mPEG5000 initiated copolymers than mPEG2000 initiated copolymers. Moreover, the influence of the length of hydrophobic block and its stereoisomeric form on drug release rate was evidenced. Therefore, PLA/PEG filomicelles with good stability, high drug loading capacity and sustained drug release appear most attractive for drug delivery applications.

Biopharmaceutical assessment of eye drops containing aloe (Aloe arborescens Mill.) and neomycin sulphate.

The subject of the studies was eye drops made of aloe, containing the group of aloe chemical substances of anti-inflammatory use and neomycin sulphate. The aim of the studies was to evaluate the permeability of biologically active aloe substances, determined as aloenin, through synthetic lipophilic and hydrophilic membranes in a standard perfusion apparatus and in vitro verification of the transport possibilities of these substances through the isolated cornea of pig's eye. The permeability process of biologically active aloe substances determined as aloenin, through synthetic lipophilic and hydrophilic membranes, was analyzed using the first-order kinetics. Estimated quotas of permeability rate constant show that the investigated chemical compounds of aloe, included in the eye drops, diffused through the applied membranes. The studies of permeability through isolated pig's cornea proved that biologically active aloe substances could not overcome this biological barrier. On the basis of biopharmaceutical studies it can be concluded that the eye drops containing aloe and neomycin sulphate, due to the lack of permeating abilities through the eye cornea, should be particularly useful in the treatment of inflammations and infections of external parts of the eye, such as conjuctiva, eyelid edges, lacrimal sac and cornea.

Reversibly PEGylated nanocarrier for cisplatin delivery.

A star-shaped copolymer bearing a shell of poly(ethylene glycol) (PEG) chains was designed as a carrier of cisplatin. The proposed strategy was based on synthesis of a PEGylating agent and the incorporation of cisplatin as a reversible linker for PEG modification of the star macromolecules. The attachment of PEG chains to the stars and their release under physiological conditions, as well as the changes in particle size and mobility upon drug loading, was evidenced by diffusion ordered NMR spectroscopy (DOSY). The results demonstrated that PEGylation reduced inter-stars cross-linking and increased the stability of the nanocolloidal solution. The formation of PEG shell resulted in higher drug payload and improved drug release profile of the nanoconjugates. The in vitro bioassay in a panel of human tumor cell lines confirmed that the PEGylated conjugates exhibited superior growth inhibitory activity compared to the cisplatin-loaded nonPEGylated carrier.

The influence of chain microstructure of biodegradable copolyesters obtained with low-toxic zirconium initiator to in vitro biocompatibility.

Because of the wide use of biodegradable materials in tissue engineering, it is necessary to obtain biocompatible polymers with different mechanical and physical properties as well as degradation ratio. Novel co- and terpolymers of various composition and chain microstructure have been developed and applied for cell culture. The aim of this study was to evaluate the adhesion and proliferation of human chondrocytes to four biodegradable copolymers: lactide-coglycolide, lactide-co-ε-caprolactone, lactide-co-trimethylene carbonate, glycolide-co-ε-caprolactone, and one terpolymer glycolide-colactide-co-ε-caprolactone synthesized with the use of zirconium acetylacetonate as a nontoxic initiator. Chain microstructure of the copolymers was analyzed by means of ¹H and ¹³C NMR spectroscopy and surface properties by AFM technique. Cell adhesion and proliferation were determined by CyQUANT Cell Proliferation Assay Kit. After 4 h the chondrocyte adhesion on the surface of studied materials was comparable to standard TCPS. Cell proliferation occurred on all the substrates; however, among the studied polymers poly(L-lactide-coglycolide) 85 : 15 that characterized the most blocky structure best supported cell growth. Chondrocytes retained the cell membrane integrity evaluated by the LDH release assay. As can be summarized from the results of the study, all the studied polymers are well tolerated by the cells that make them appropriate for human chondrocytes growth.