Regeneration of alveolar bone defects in the experimental pig model: A systematic review and meta-analysis.

OBJECTIVE: Pigs are emerging as a preferred experimental in vivo model for bone regeneration. The study objective was to answer the focused PEO question: in the pig model (P), what is the capacity of experimental alveolar bone defects (E) for spontaneous regeneration in terms of new bone formation (O)? METHODS: Following PRISMA guidelines, electronic databases were searched for studies reporting experimental bone defects or extraction socket healing in the maxillae or mandibles of pigs. The main inclusion criteria were the presence of a control group of untreated defects/sockets and the assessment of regeneration via 3D tomography [radiographic defect fill (RDF)] or 2D histomorphometry [new bone formation (NBF)]. Random effects meta-analyses were performed for the outcomes RDF and NBF. RESULTS: Overall, 45 studies were included reporting on alveolar bone defects or extraction sockets, most frequently in the mandibles of minipigs. Based on morphology, defects were broadly classified as 'box-defects' (BD) or 'cylinder-defects' (CD) with a wide range of healing times (10 days to 52 weeks). Meta-analyses revealed pooled estimates (with 95% confidence intervals) of 50% RDF (36.87%-63.15%) and 43.74% NBF (30.47%-57%) in BD, and 44% RDF (16.48%-71.61%) and 39.67% NBF (31.53%-47.81%) in CD, which were similar to estimates of socket-healing [48.74% RDF (40.35%-57.13%) and 38.73% NBF (28.57%-48.89%)]. Heterogeneity in the meta-analysis was high (I2 > 90%). CONCLUSION: A substantial body of literature revealed a high capacity for spontaneous regeneration in experimental alveolar bone defects of (mini)pigs, which should be considered in future studies of bone regeneration in this animal model.

The use of mesenchymal stromal cell secretome to enhance guided bone regeneration in comparison with leukocyte and platelet-rich fibrin.

OBJECTIVES: Secretomes of mesenchymal stromal cells (MSC) represent a novel strategy for growth-factor delivery for tissue regeneration. The objective of this study was to compare the efficacy of adjunctive use of conditioned media of bone-marrow MSC (MSC-CM) with collagen barrier membranes vs. adjunctive use of conditioned media of leukocyte- and platelet-rich fibrin (PRF-CM), a current growth-factor therapy, for guided bone regeneration (GBR). METHODS: MSC-CM and PRF-CM prepared from healthy human donors were subjected to proteomic analysis using mass spectrometry and multiplex immunoassay. Collagen membranes functionalized with MSC-CM or PRF-CM were applied on critical-size rat calvaria defects and new bone formation was assessed via three-dimensional (3D) micro-CT analysis of total defect volume (2 and 4 weeks) and 2D histomorphometric analysis of central defect regions (4 weeks). RESULTS: While both MSC-CM and PRF-CM revealed several bone-related proteins, differentially expressed proteins, especially extracellular matrix components, were increased in MSC-CM. In rat calvaria defects, micro-CT revealed greater total bone coverage in the MSC-CM group after 2 and 4 weeks. Histologically, both groups showed a combination of regular new bone and 'hybrid' new bone, which was formed within the membrane compartment and characterized by incorporation of mineralized collagen fibers. Histomorphometry in central defect sections revealed greater hybrid bone area in the MSC-CM group, while the total new bone area was similar between groups. CONCLUSION: Based on the in vitro and in vivo investigations herein, functionalization of membranes with MSC-CM represents a promising strategy to enhance GBR.

Digital technology integration in business model innovation for carbon neutrality: An evolutionary process model for SMEs.

This study delves into the strategies employed by small and medium-sized enterprises (SMEs) to embed digital technology into their business models, aiming to reach carbon neutrality. We offer a comprehensive analysis of five high technology SMEs, unveiling an evolutionary process model that highlights their journey toward integrating technology. The integration process is delineated into three progressive stages. Initially, digital technology is seen as an 'enabler' that promotes the birth of an innovative business model, essentially transforming the mechanisms of value creation, delivery, and capture. As SMEs evolve to an intermediate stage, digital technology becomes a 'disruptor', reshaping and reinventing the business model in terms of how value is created, delivered, and captured. Entering the maturity stage, digital technology is elevated to the role of 'expertise', leading to a sophisticated business model that refines and optimizes these aspects of value. The influence of these business model innovations on carbon neutrality is complex and varies distinctly with each stage, reflecting the dynamic interplay between digital technology and business model evolution.

Assessment of Health-Related Quality of Life in Children with Totally Corrected Tetralogy of Fallot in Sulaymaniyah, Iraq.

PURPOSE: This study examined the health-related quality of life among children who have undergone surgery for tetralogy of Fallot (TOF) compared to healthy children. DESIGN: Cross-sectional study. METHODS: The study was carried out at Children's Heart Hospital and Primary Healthcare Centers in Sulaymaniyah, Iraq, between July 1, 2022, and November 1, 2022. The study involved 400 participants, comprised of 200 parents of healthy children and 200 parents with children with repaired TOF. Data collection involved utilizing a 5-point Likert Scale questionnaire administered through direct face-to-face interviews with the parents of the children. FINDINGS: Children with surgically repaired TOF had markedly lower mean scores (P ≤ 0.001) in the overall dimension of QoL (Mean rank = 137) when compared to healthy children (Mean rank = 263). Furthermore, it was observed that children with repaired TOF had significantly lower mean scores (P < 0.001) across all subdimensions of QoL compared to their healthy counterparts. In the subject of children with repaired TOF, the impact of maternal education (illiterate and lower education) on overall QoL was found to be highly significant (P < 0.001). In addition, children with repaired TOF from lower socioeconomic status (SES) families had worse quality of life than those from medium and high SES families, with a p-value <0.001. CONCLUSIONS: Repaired TOF children exhibited notable deficiencies across all dimensions of QoL compared to healthy children. Moreover, SES emerged as a significant determinant influencing the QoL outcomes of repaired TOF children. CLINICAL EVIDENCE: Despite undergoing corrective surgery for TOF, the QoL in children with repaired TOF continues to be lower than that of their healthy counterparts. Notably, the economic and educational status of the family significantly impacts the way these children perceive and experience their QoL. This finding underscores the critical significance of factoring in socioeconomic elements when addressing the well-being of this particular group of children.

Proteomic Analysis of Mesenchymal Stromal Cells Secretome in Comparison to Leukocyte- and Platelet-Rich Fibrin.

Secretomes of mesenchymal stromal cells (MSCs) are emerging as a novel growth factor (GF)-based strategy for periodontal and bone regeneration. The objective of this study was to compare the secretome of human bone marrow MSC (BMSC) to that of leukocyte- and platelet-rich fibrin (L-PRF), an established GF-based therapy, in the context of wound healing and regeneration. Conditioned media from human BMSCs (BMSC-CM) and L-PRF (LPRF-CM) were subjected to quantitative proteomic analysis using liquid chromatography with tandem mass spectrometry. Global profiles, gene ontology (GO) categories, differentially expressed proteins (DEPs), and gene set enrichment (GSEA) were identified using bioinformatic methods. Concentrations of selected proteins were determined using a multiplex immunoassay. Among the proteins identified in BMSC-CM (2157 proteins) and LPRF-CM (1420 proteins), 1283 proteins were common. GO analysis revealed similarities between the groups in terms of biological processes (cellular organization, protein metabolism) and molecular functions (cellular/protein-binding). Notably, more DEPs were identified in BMSC-CM (n = 550) compared to LPRF-CM (n = 118); these included several key GF, cytokines, and extracellular matrix (ECM) proteins involved in wound healing. GSEA revealed enrichment of ECM (especially bone ECM)-related processes in BMSC-CM and immune-related processes in LPRF-CM. Similar trends for intergroup differences in protein detection were observed in the multiplex analysis. Thus, the secretome of BMSC is enriched for proteins/processes relevant for periodontal and bone regeneration. The in vivo efficacy of this therapy should be evaluated in future studies.

Music of metagenomics-a review of its applications, analysis pipeline, and associated tools.

This humble effort highlights the intricate details of metagenomics in a simple, poetic, and rhythmic way. The paper enforces the significance of the research area, provides details about major analytical methods, examines the taxonomy and assembly of genomes, emphasizes some tools, and concludes by celebrating the richness of the ecosystem populated by the "metagenome."

Impact of Resolvin D1 on the inflammatory phenotype of periodontal ligament cell response to hypoxia.

OBJECTIVE: Periodontal ligament cells (PDLCs) are critical for wound healing and regenerative capacity of periodontal diseases. Within an inflammatory periodontal pocket, a hypoxic environment can aggravate periodontal inflammation, where PDLCs response to the inflammation would change. Resolvin D1 (RvD1) is an endogenous lipid mediator, which can impact intracellular inflammatory pathways of periodontal/oral cells and periodontal regeneration. It is not clear how hypoxia and RvD1 impact the inflammatory responses of pro-inflammatory PDLCs phenotype. Therefore, this study aimed to test hypoxia could induce changes in pro-inflammatory phenotype of PDLCs and RvD1 could reverse it. METHODS: Human PDLCs were cultured from periodontal tissues from eight healthy individuals and were characterized by immunofluorescence staining of vimentin and cytokeratin. Cell viability was examined by Methyl-thiazolyl-tetrazolium (MTT) assay. To examine the effects of hypoxia and RvD1 on the inflammatory responses of pro-inflammatory PDLCs phenotype, protein levels and gene expressions of inflammatory cytokines and signal transduction molecules were measured by enzyme-linked immunosorbent assay (ELISA), western blotting (WB), and real-time quantitative reverse transcription PCR (real-time qRT-PCR). Alizarin red S staining and real-time qRT-PCR were employed to study the effects of hypoxia and RvD1 on the osteogenic differentiation of pro-inflammatory PDLCs phenotype. RESULTS: It was found that hypoxia increases the expression of inflammatory factors at the gene level (p < .05). RvD1 reduced the expression of IL-1ß (p < .05) in PDLCs under hypoxia both at the protein and RNA levels. There were increases in the expression of p38 mitogen-activated protein kinase (p38 MAPK, p < .01) and protein kinase B (Akt, p < .05) in response to RvD1. Also, a significantly higher density of calcified nodules was observed after treatment with RvD1 for 21 days under hypoxia. CONCLUSION: Our results indicate that hypoxia up-regulated the inflammatory level of PDLCs. RvD1 can reduce under-hypoxia-induced pro-inflammatory cytokines in the inflammatory phenotype of PDLCs. Moreover, RvD1 promotes the calcium nodules in PDLCs, possibly by affecting the p38 MAPK signaling pathway through Akt and HIF-1α.

Influence of Bone Substitutes on Mesenchymal Stromal Cells in an Inflammatory Microenvironment.

Bone regeneration is driven by mesenchymal stromal cells (MSCs) via their interactions with immune cells, such as macrophages (MPs). Bone substitutes, e.g., bi-calcium phosphates (BCPs), are commonly used to treat bone defects. However, little research has focused on MSC responses to BCPs in the context of inflammation. The objective of this study was to investigate whether BCPs influence MSC responses and MSC-MP interactions, at the gene and protein levels, in an inflammatory microenvironment. In setup A, human bone marrow MSCs combined with two different BCP granules (BCP 60/40 or BCP 20/80) were cultured with or without cytokine stimulation (IL1ß + TNFα) to mimic acute inflammation. In setup B, U937 cell-line-derived MPs were introduced via transwell cocultures to setup A. Monolayer MSCs with and without cytokine stimulation served as controls. After 72 h, the expressions of genes related to osteogenesis, healing, inflammation and remodeling were assessed in the MSCs via quantitative polymerase chain reactions. Additionally, MSC-secreted cytokines related to healing, inflammation and chemotaxis were assessed via multiplex immunoassays. Overall, the results indicate that, under both inflammatory and non-inflammatory conditions, the BCP granules significantly regulated the MSC gene expressions towards a pro-healing genotype but had relatively little effect on the MSC secretory profiles. In the presence of the MPs (coculture), the BCPs positively regulated both the gene expression and cytokine secretion of the MSCs. Overall, similar trends in MSC responses were observed with BCP 60/40 and BCP 20/80. In summary, within the limits of in vitro models, these findings suggest that the presence of BCP granules at a surgical site may not necessarily have a detrimental effect on MSC-mediated wound healing, even in the event of inflammation.

Comparison of bone regenerative capacity of donor-matched human adipose-derived and bone marrow mesenchymal stem cells.

Adipose-derived stem cells (ASC) have been used as an alternative to bone marrow mesenchymal stem cells (BMSC) for bone tissue engineering. However, the efficacy of ASC in bone regeneration in comparison with BMSC remains debatable, since inconsistent results have been reported. Comparing ASC with BMSC obtained from different individuals might contribute to this inconsistency in results. Therefore, this study aimed to compare the bone regenerative capacity of donor-matched human ASC and BMSC seeded onto poly(L-lactide-co-ε-caprolactone) scaffolds using calvarial bone defects in nude rats. First, donor-matched ASC and BMSC were seeded onto the co-polymer scaffolds to evaluate their in vitro osteogenic differentiation. Seeded scaffolds and scaffolds without cells (control) were then implanted in calvarial defects in nude rats. The expression of osteogenesis-related genes was examined after 4 weeks. Cellular activity was investigated after 4 and 12 weeks. Bone formation was evaluated radiographically and histologically after 4, 12, and 24 weeks. In vitro, ASC and BMSC demonstrated mineralization. However, BMSC showed higher alkaline phosphatase activity than ASC. In vivo, human osteogenesis-related genes Runx2 and collagen type I were expressed in defects with scaffold/cells. Defects with scaffold/BMSC had higher cellular activity than defects with scaffold/ASC. Moreover, bone formation in defects with scaffold/BMSC was greater than in defects with scaffold/ASC, especially at the early time-point. These results suggest that although ASC have the potential to regenerate bone, the rate of bone regeneration with ASC may be slower than with BMSC. Accordingly, BMSC are more suitable for bone regenerative applications.

Conditioned Medium from Bone Marrow Mesenchymal Stem Cells Restored Oxidative Stress-Related Impaired Osteogenic Differentiation.

Oxidative stress from high levels of intracellular reactive oxygen species (ROS) has been linked to various bone diseases. Previous studies indicate that mesenchymal stem cells (MSC) secrete bioactive factors (conditioned medium (MSC-CM)) that have antioxidant effects. However, the antioxidant role of MSC-CM on osteogenesis has not been fully studied. We aimed to identify antioxidant proteins in MSC-CM using mass spectrometry-based proteomics and to explore their effects on osteogenic differentiation of human bone marrow mesenchymal stem cells (hBMSC) exposed to oxidative stress induced by hydrogen peroxide (H2O2). Our analysis revealed that MSC-CM is comprised of antioxidant proteins that are involved in several biological processes, including negative regulation of apoptosis and positive regulation of cell proliferation. Then, hBMSC exposed to H2O2 were treated with MSC-CM, and the effects on their osteogenic differentiation were evaluated. MSC-CM restored H2O2-induced damage to hBMSC by increasing the antioxidant enzyme-SOD production and the mRNA expression level of the anti-apoptotic BCL-2. A decrease in ROS production and cellular apoptosis was also shown. MSC-CM also modulated mRNA expression levels of osteogenesis-related genes, runt-related transcription factor 2, collagen type I, bone morphogenic protein 2, and osteopontin. Furthermore, collagen type I protein secretion, alkaline phosphatase activity, and in vitro mineralization were increased. These results indicate that MSC-CM contains several proteins with antioxidant and anti-apoptotic properties that restored the impaired hBMSC osteogenic differentiation associated with oxidative stress.

Poly(ε-caprolactone-co-p-dioxanone): a Degradable and Printable Copolymer for Pliable 3D Scaffolds Fabrication toward Adipose Tissue Regeneration.

The advancement of 3D printing technologies in the fabrication of degradable scaffolds for tissue engineering includes, from the standpoint of the polymer chemists, an urgent need to develop new materials that can be used as ink and are suitable for medical applications. Here, we demonstrate that a copolymer of ε-caprolactone (CL) with low amounts of p-dioxanone (DX) (15 mol %) is a degradable and printable material that suits the requirements of melt extrusion 3D printing technologies, including negligible degradation during thermal processing. It is therefore a potential candidate for soft tissue regeneration. The semicrystalline CL/DX copolymer is processed at a lower temperature than a commercial polycaprolactone (PCL), shaped as a filament for melt extrusion 3D printing and as porous and pliable scaffolds with a gradient design. Scaffolds have Young's modulus in the range of 60-80 MPa, values suitable for provision of structural support for damaged soft tissue such as breast tissue. SEM and confocal microscope indicate that the CL/DX copolymer scaffolds support adipose stem cell attachment, spreading, and proliferation.

Printability and Critical Insight into Polymer Properties during Direct-Extrusion Based 3D Printing of Medical Grade Polylactide and Copolyesters.

Various 3D printing techniques currently use degradable polymers such as aliphatic polyesters to create well-defined scaffolds. Even though degradable polymers are influenced by the printing process, and this subsequently affects the mechanical properties and degradation profile, degradation of the polymer during the process is not often considered. Degradable scaffolds are today printed and cell-material interactions evaluated without considering the fact that the polymer change while printing the scaffold. Our methodology herein was to vary the printing parameters such as temperature, pressure, and speed to define the relationship between printability, polymer microstructure, composition, degradation profile during the process, and rheological behavior. We used high molecular weight medical-grade (co)polymers, poly(l-lactide-co-ε-caprolactone) (PCLA), poly(l-lactide-co-glycolide) (PLGA), and poly(d,l-lactide-co-glycolide) (PDLGA), with l-lactide content ranging from 25 to 100 mol %, for printing in an extrusion-based printer (3D Bioplotter). Optical microscopy confirmed that the polymers were printable at high resolution and good speed, until a certain degree of degradation. The results show also that printability can not be claimed just by optimizing printing parameters and highlight the importance of a careful analysis of how the polymer's structure and properties vary during printing. The polymers thermally decomposed from the first processing minute and caused a decrease in the average block length of the lactide blocks in the copolymers and generated lower crystallinity. Poly(l-lactide) (PLLA) and PCLA are printable at a higher molecular weight, less degradation before printing was possible, compared to PLGA and PDLGA, a result explained by the higher complex viscosity and more elastic polymeric melt of the copolymer containing glycolide (GA) and lactide (LA). In more detail, copolymers comprised of LA and ε-caprolactone (CL) formed lower molecular weight compounds over the course of printing, while the PLGA copolymer was more susceptible to intermolecular transesterification reactions, which do not affect the overall molecular weight, but cause changes in the copolymer microstructure. This results in a longer printing time for PLGA than PLLA and PCLA.

Hearing protective devices and its role in Noise induced hearing loss: An interventional study.

This Quasi experimental study was conducted with the objective to determine the effectiveness of preventive measures including awareness programme and use of hearing protective devices (HPDs) for the prevention and control of Noise Induced Hearing Loss among Oil and Gas field workers from January 2015 to March 2016. A total of 120 workers were selected by convenient sampling, and subjected to pure tone audiometry (PTA) to obtain hearing thresholds followed by intervention with HPDs and retesting a year later. The Mean pure tone thresholds on first visit was 21.19±11.60 dB in right and 24.66±13.26 dB in left ear, while means at second visit (after one year) were 20.65±10.44 dB and 21.45±11.74 dB for the right and left ears respectively with statistically significant difference (p=0.001) for the left ear on t-test. However the difference of frequency and percentage of the participants with normal and reduced hearing at both visits was significant (chi square P=0.001). Hearing protective devices (HPDs) are an effective means to prevent NIHL in workers of oil and gas fields.

Translation of a standardized manufacturing protocol for mesenchymal stromal cells: A systematic comparison of validation and manufacturing data.

BACKGROUND: Many data are available on expansion protocols for mesenchymal stromal cells (MSCs) for both experimental settings and manufacturing for clinical trials. However, there is a lack of information on translation of established protocols for Good Manufacturing Practice (GMP) from validation to manufacturing for clinical application. We present the validation and translation of a standardized pre-clinical protocol for isolation and expansion of MSCs for a clinical trial for reconstitution of alveolar bone. METHODS: Key parameters of 22 large-scale expansions of MSCs from bone marrow (BM) for validation were compared with 11 expansions manufactured for the clinical trial "Jaw bone reconstruction using a combination of autologous mesenchymal stromal cells and biomaterial prior to dental implant placement (MAXILLO1)" aimed at reconstruction of alveolar bone. RESULTS: Despite variations of the starting material, the robust protocol led to stable performance characteristics of expanded MSCs. Manufacturing of the autologous advanced therapy medicinal product MAXILLO-1-MSC was possible, requiring 21 days for each product. Transport of BM aspirates and MSCs within 24 h was guaranteed. MSCs fulfilled quality criteria requested by the national competent authority. In one case, the delivered MSCs developed a mosaic in chromosomal finding, showing no abnormality in differentiation capacity, growth behavior or surface marker expression during long-term culture. The proportion of cells with the mosaic decreased in long-term culture and cells stopped growth after 38.4 population doublings. CONCLUSIONS: Clinical use of freshly prepared MSCs, manufactured according to a standardized and validated protocol, is feasible for bone regeneration, even if there was a long local distance between manufacturing center and clinical site. Several parameters, such as colony forming units fibroblasts (CFU-F), percentage of CD34+ cells, cell count of mononuclear cells (MNCs) and white blood cells (WBCs), of the BM may serve as a predictive tool for the yield of MSCs and may help to avoid unnecessary costs for MSC manufacturing due to insufficient cell expansion rates.

Cell therapy for orofacial bone regeneration: A systematic review and meta-analysis.

AIM: The objective of the present review was to answer the focused question: what is the effect of cell therapy in terms of orofacial bone regeneration compared to grafting with only biomaterial scaffolds and/or autogenous bone? METHODS: Electronic databases were searched for relevant controlled clinical and pre-clinical (large-animal) studies. Separate meta-analyses of quantitative data regarding histological or radiographic new bone formation were performed. RESULTS: Forty-seven eligible clinical and 57 pre-clinical studies were included. Clinical studies were categorized based on the use of "minimally manipulated" whole tissues (e.g., bone marrow) or ex vivo expanded cells from "uncommitted" (bone marrow, adipose tissue) or "committed" sources (periosteum, bone). Based on limited and heterogeneous clinical evidence, implantation of cells (mostly whole bone marrow), in combination with biomaterial scaffolds results in bone regeneration which is (a) superior compared to implantation of scaffolds alone in sinus and horizontal ridge augmentation, and (b) comparable to autogenous bone in alveolar cleft repair. CONCLUSIONS: Although current evidence points to the benefits of cell therapy in certain clinical indications, it is unclear whether the use of ex vivo expanded cells, either uncommitted or committed, is superior to whole tissue fractions in terms of bone regeneration. The relatively larger effect sizes in favour of cell therapy observed in pre-clinical studies are diminished in clinical trials. Future controlled studies should include cost-effectiveness analyses to guide clinical decision-making.

Biomaterials and regenerative technologies used in bone regeneration in the craniomaxillofacial region: Consensus report of group 2 of the 15th European Workshop on Periodontology on Bone Regeneration.

BACKGROUND AND AIMS: To review the regenerative technologies used in bone regeneration: bone grafts, barrier membranes, bioactive factors and cell therapies. MATERIAL AND METHODS: Four background review publications served to elaborate this consensus report. RESULTS AND CONCLUSIONS: Biomaterials used as bone grafts must meet specific requirements: biocompatibility, porosity, osteoconductivity, osteoinductivity, surface properties, biodegradability, mechanical properties, angiogenicity, handling and manufacturing processes. Currently used biomaterials have demonstrated advantages and limitations based on the fulfilment of these requirements. Similarly, membranes for guided bone regeneration (GBR) must fulfil specific properties and potential biological mechanisms to improve their clinical applicability. Pre-clinical and clinical studies have evaluated the added effect of bone morphogenetic proteins (mainly BMP-2) and autologous platelet concentrates (APCs) when used as bioactive agents to enhance bone regeneration. Three main approaches using cell therapies to enhance bone regeneration have been evaluated: (a) "minimally manipulated" whole tissue fractions; (b) ex vivo expanded "uncommitted" stem/progenitor cells; and (c) ex vivo expanded "committed" bone-/periosteum-derived cells. Based on the evidence from clinical trials, transplantation of cells, most commonly whole bone marrow aspirates (BMA) or bone marrow aspirate concentrations (BMAC), in combination with biomaterial scaffolds has demonstrated an additional effect in sinus augmentation and horizontal ridge augmentation, and comparable bone regeneration to autogenous bone in alveolar cleft repair.

Coating 3D Printed Polycaprolactone Scaffolds with Nanocellulose Promotes Growth and Differentiation of Mesenchymal Stem Cells.

3D printed polycaprolactone (PCL) has potential as a scaffold for bone tissue engineering, but the hydrophobic surface may hinder optimal cell responses. The surface properties can be improved by coating the scaffold with cellulose nanofibrils material (CNF), a multiscale hydrophilic biocompatible biomaterial derived from wood. In this study, human bone marrow-derived mesenchymal stem cells were cultured on tissue culture plates (TCP) and 3D printed PCL scaffolds coated with CNF. Cellular responses to the surfaces (viability, attachment, proliferation, and osteogenic differentiation) were documented. CNF significantly enhanced the hydrophilic properties of PCL scaffolds and promoted protein adsorption. Live/dead staining and lactate dehydrogenase release assays confirmed that CNF did not inhibit cellular viability. The CNF between the 3D printed PCL strands and pores acted as a hydrophilic barrier, enhancing cell seeding efficiency, and proliferation. CNF supported the formation of a well-organized actin cytoskeleton and cellular production of vinculin protein on the surfaces of TCP and PCL scaffolds. Moreover, CNF-coated surfaces enhanced not only alkaline phosphatase activity, but also collagen Type-I and mineral formation. It is concluded that CNF coating enhances cell attachment, proliferation, and osteogenic differentiation and has the potential to improve the performance of 3D printed PCL scaffolds for bone tissue engineering.

Outcomes of cataract surgery at teaching hospital in Karachi.

OBJECTIVE: To assess outcomes of cataract surgery at a tertiary care hospital in Karachi. METHODS: This retrospective study was conducted at Aga Khan University Hospital, Karachi, and comprised data of patients who underwent cataract surgery from January 2011 to December 2015. The data was collected using guidelines based on World Health Organisation systems for quality monitoring. Postoperative follow-up was done at 1 day, 1 week, 4 weeks and after 12 weeks. Visual acuity was recorded as good (6/6-6/18), borderline (6/18-6/60) and poor (<6/60). Intraoperative and postoperative complications were also noted. RESULTS: Of the 570 patient charts reviewed, 527(92.45%) were included in the study. Among them, 302(57.4%) were females and 225(42.6%) were males. The overall mean age of patients was 59.8±7.2 years. There were 275(52.2%) right eyes, 382(72.5%) were myope and the remaining 145(27.5%) were hypermetrope. There were 315(59.6%) patients who suffered from different systemic diseases, with diabetes mellitus being on the top of list followed by hypertension. Pre-operative best corrected visual acuity was good in 35(6.7%) patients, borderline in 355(67.4%), and poor in 137(25.9%). CONCLUSIONS: The surgical outcomes were comparable with previous studies.

Cytocompatibility of Wood-Derived Cellulose Nanofibril Hydrogels with Different Surface Chemistry.

The current study aims to demonstrate the influence of the surface chemistry of wood-derived cellulose nanofibril (CNF) hydrogels on fibroblasts for tissue engineering applications. TEMPO-mediated oxidation or carboxymethylation pretreatments were employed to produce hydrogels with different surface chemistry. This study demonstrates the following: first, the gelation of CNF with cell culture medium and formation of stable hydrogels with improved rheological properties; second, the response of mouse fibroblasts cultured on the surface of the hydrogels or sandwiched within the materials with respect to cytotoxicity, cell attachment, proliferation, morphology, and migration. Indirect cytotoxicity tests showed no toxic effect of either hydrogel. The direct contact with the carboxymethylated hydrogel adversely influenced the morphology of the cells and limited their spreading, while typical morphology and spreading of cells were observed with the TEMPO-oxidized hydrogel. The porous fibrous structure may be a key to cell proliferation and migration in the hydrogels.