Longitudinal study of carotid artery bifurcation geometry using magnetic resonance angiography.

OBJECTIVES: Geometry of carotid artery has been known as a risk factor for atherosclerotic carotid disease. Though aging and disease progression can both attribute to geometric changes in the arteries, the exact nature of this phenomenon remains elusive. The aim of our study was to investigate carotid artery geometric changes in a longitudinal study. METHODS: We conducted a retrospective study of 114 subjects who underwent carotid contrast-enhanced magnetic resonance angiography at our clinic at baseline (2005 to 2007) and after 10 years. The right carotid arteries were segmented using semi-automated methods to obtain various measurements of carotid artery geometry. For each patient, these parameters were assessed at both time points, including bifurcation angle, internal carotid artery angle, vessel diameter, and circumference. RESULTS: The median age for the total patient population ( n = 114) at baseline was 59.06 ± 10.40 years. Mean time interval between baseline magnetic resonance angiography and magnetic resonance angiography after 10 years of these patients was 129.18 ± 7.77 months. For the whole group, there was a significant increase in the bifurcation angle ( p < 0.05) over a 10-year period. A significant increase was also noted in the diameter and circumference of the common carotid artery ( p < 0.05). However, the other vessel diameters and circumferences (bulb carotid, internal carotid) as well as the internal carotid angle did not significantly change ( p ≥ 0.05). CONCLUSIONS: The diameter and circumference of the common carotid artery and bifurcation angle significantly increased over a decade of life.

Improving Blood Flow Visualization of Recirculation Regions at Carotid Bulb in 4D Flow MRI Using Semi-Automatic Segmentation with ITK-SNAP.

Assessment of carotid bulb hemodynamics using four-dimensional (4D) flow magnetic resonance imaging (MRI) requires accurate segmentation of recirculation regions that is frequently hampered by limited resolution. This study aims to improve the accuracy of 4D flow MRI carotid bulb segmentation and subsequent recirculation regions analysis. Time-of-flight (TOF) MRI and 4D flow MRI were performed on bilateral carotid artery bifurcations in seven healthy volunteers. TOF-MRI data was segmented into 3D geometry for computational fluid dynamics (CFD) simulations. ITK-SNAP segmentation software was included in the workflow for the semi-automatic generation of 4D flow MRI angiographic data. This study compared the velocities calculated at the carotid bifurcations and the 3D blood flow visualization at the carotid bulbs obtained by 4D flow MRI and CFD. By applying ITK-SNAP segmentation software, an obvious improvement in the 4D flow MRI visualization of the recirculation regions was observed. The 4D flow MRI images of the recirculation flow characteristics of the carotid artery bulbs coincided with the CFD. A reasonable agreement was found in terms of velocity calculated at the carotid bifurcation between CFD and 4D flow MRI. However, the dispersion of velocity data points relative to the local errors of measurement in 4D flow MRI remains. Our proposed strategy showed the feasibility of improving recirculation regions segmentation and the potential for reliable blood flow visualization in 4D flow MRI. However, quantitative analysis of recirculation regions in 4D flow MRI with ITK-SNAP should be enhanced for use in clinical situations.

Comparison of Hemodynamic Visualization in Cerebral Arteries: Can Magnetic Resonance Imaging Replace Computational Fluid Dynamics?

A multimodality approach was applied using four-dimensional flow magnetic resonance imaging (4D flow MRI), time-of-flight magnetic resonance angiography (TOF-MRA) signal intensity gradient (SIG), and computational fluid dynamics (CFD) to investigate the 3D blood flow characteristics and wall shear stress (WSS) of the cerebral arteries. TOF-MRA and 4D flow MRI were performed on the major cerebral arteries in 16 healthy volunteers (mean age 34.7 ± 7.6 years). The flow rate measured with 4D flow MRI in the internal carotid artery, middle cerebral artery, and anterior cerebral artery were 3.8, 2.5, and 1.2 mL/s, respectively. The 3D blood flow pattern obtained through CFD and 4D flow MRI on the cerebral arteries showed reasonable consensus. CFD delivered much greater resolution than 4D flow MRI. TOF-MRA SIG and CFD WSS of the major cerebral arteries showed reasonable consensus with the locations where the WSS was relatively high. However, the visualizations were very different between TOF-MRA SIG and CFD WSS at the internal carotid artery bifurcations, the anterior cerebral arteries, and the anterior communicating arteries. 4D flow MRI, TOF-MRA SIG, and CFD are complementary methods that can provide additional insight into the hemodynamics of the human cerebral artery.

Change in basilar artery length and bending according to aging and vertebral artery dominance: A longitudinal study.

This study aimed to investigate the basilar artery (BA) geometric changes in a longitudinal study. 154 subjects with normal vertebrobasilar arterial systems on magnetic resonance angiography were assigned into two groups: 1) non-dominant vertebral artery (VA) and 2) VA dominance. We defined the dominant VA as either that the VA is 3 millimeters larger in diameter or the VA is connected to BA in a more straight angle. BA imaging was segmented to obtain BA bending length (BABL) and BA length (BAL). A mixed model ANOVA was conducted to investigate the impact of aging and VA dominance on the change of BABL and BAL after 123.6 ± 16.2 months. There was a significant main effect of VA dominance on the change of BABL after about 10 years, F (1,152) = 39.78, p < 0.01. On the other hand, there was a significant main effect of aging on the change of BAL during the same period of time, F (1,152) = 6.64, p = 0.01. Most subjects had an opposite directional relationship between the dominant VA and BA bending (71.3%; p < 0.01). Our study supported the hypothesis that the bending of the BA depends on the dominance of the VA, whereas the increased length of the BA depends on aging.

Carotid Artery Plaque Identification and Display System (MRI-CAPIDS) Using Opensource Tools.

Magnetic resonance imaging (MRI) represents one modality in atherosclerosis risk assessment, by permitting the classification of carotid plaques into either high- or low-risk lesions. Although MRI is generally used for observing the impact of atherosclerosis on vessel lumens, it can also show both the size and composition of itself, as well as plaque information, thereby providing information beyond that of simple stenosis. Software systems are a valuable aid in carotid artery stenosis assessment wherein commercial software is readily available but is not accessible to all practitioners because of its often high cost. This study focuses on the development of a software system designed entirely for registration, marking, and 3D visualization of the wall and lumen, using freely available open-source tools and libraries. It was designed to be free from "feature bloat" and avoid "feature-creep." The image loading and display module of the modified QDCM library was improved by a minimum of 10,000%. A Bezier function was used in order to smoothen the curve of the polygon (referring to the shape formed by the marked points) by interpolating additional points between the marked points. This smoother curve led to a smoother 3D view of the lumen and wall.

Four-Dimensional Flow Magnetic Resonance Imaging for Assessment of Velocity Magnitudes and Flow Patterns in The Human Carotid Artery Bifurcation: Comparison with Computational Fluid Dynamics.

PURPOSE: Knowledge of the hemodynamics in the vascular system is important to understand and treat vascular pathology. The present study aimed to evaluate the hemodynamics in the human carotid artery bifurcation measured by four-dimensional (4D) flow magnetic resonance imaging (MRI) as compared to computational fluid dynamics (CFD). METHODS: This protocol used MRI data of 12 healthy volunteers for the 3D vascular models and 4D flow MRI measurements for the boundary conditions in CFD simulation. We compared the velocities measured at the carotid bifurcation and the 3D velocity streamlines of the carotid arteries obtained by these two methods. RESULTS: There was a good agreement for both maximum and minimum velocity values between the 2 methods for velocity magnitude at the bifurcation plane. However, on the 3D blood flow visualization, secondary flows, and recirculation regions are of poorer quality when visualized through the 4D flow MRI. CONCLUSION: 4D flow MRI and CFD show reasonable agreement in demonstrated velocity magnitudes at the carotid artery bifurcation. However, the visualization of blood flow at the recirculation regions and the assessment of secondary flow characteristics should be enhanced for the use of 4D flow MRI in clinical situations.