Hydrated Ionic Liquids: Perspective for Bioscience.

Hydrated ionic liquid (IL) is a simple mixture of IL and water. Unique aqueous electrolyte solution can be designed by mixing IL with limited amount of water. In most hydrated ILs, there are no free water and all are strongly interacted with ions. The properties of hydrated ILs, such as polarity, viscosity, ion mobility, and hydrogen bonding ability, can therefore be controlled simply by water content. This mixture is expected to provide similar environment to that of living cell, and is desired to be effective solvents for biomolecules. In this account, we would like to survey the basic properties, recent results, and future aspects of the hydrated ILs.

Applications of Zwitterions and Zwitterionic Polymers for Li-Ion Batteries.

A zwitterion is a neutral compound that has both a cation and an anion in the same molecule. Quaternary ammonium cations are frequently used for zwitterions. Zwitterions with quaternary ammonium cations are also common in biological molecules, such as phospholipids, which are the main components of cell membranes. Chemically, they have broad applicability because they are dielectric, non-volatile, and highly polar compounds with a large dipole moment. In addition, after salt addition, ion exchange does not occur in the presence of zwitterions. Owing to these characteristics, zwitterions have been applied as novel electrolyte materials targeting high ionic conductivity. In this review, application of zwitterions and their polymers for Li-ion batteries is addressed.

[Validation Study on Developed Methods for Anions and Bromic Acid in Various Mineral Waters by Ion Chromatography].

Five kinds of anions namely fluoride, chlorate, chlorite, nitrate and nitrite ions, and bromic acid were determined in various mineral waters (MWs), and the methods were validated. MWs are varying in the degree of hardness and contents of carbonate. When the five anions were measured based on the official method of tap water, the peak shape of fluoride ion in MWs with high degree of hardness was different from the standard solution, making it difficult to determine. The same phenomenon was also observed when bromic acid was measured. In order to achieve accurate determination, five-fold dilution with ultrapure water was carried out on the samples. With the additional step, the abnormal peak of both analytes was improved, and no difference in the retention times between standard and sample solutions was observed. The validation tests were performed using the developed methods with the additional diluting step, and the results of all target substances met the criteria of the guideline on analytical method validation for MW in Japan. Our results suggested that the methods we developed could be useful for the accurate determination of the anions and bromic acid in various MWs on the market.

[Inter-laboratory Study on the Modified Methods for Analyzing Bisphenol A Content for Migration Tests from Polycarbonate Food Apparatuses, Containers, and Packaging].

An inter-laboratory study involving 24 laboratories was conducted to validate the modified analytical method for the migration solution of heptane for the determination of bisphenol A migrating from polycarbonate food processing materials. In this study, two concentrations of samples were blindly coded. Each laboratory determined the analyte (bisphenol A, phenol and p-tert-butylphenol) concentration in each sample according to the established protocol. The obtained values were analyzed statistically using internationally accepted guidelines. Horwitz ratios were calculated based on the reproducibility relative standard deviation (RSDR), which was estimated from the inter-laboratory study, and predicted RSDR, which was calculated using the Horwitz/Thompson equation. Horwitz ratios of the two samples ranged from 0.15 to 0.37 for the three compounds, meeting the performance criteria of less than 2 set by the Codex Alimentarius for analytical method approval. These results showed that this modified analytical method shows good performance as an analytical method for the migration solution of heptane.

[Inter-laboratory Study on the Modified Method Assessment for the Determining Methanol Content in Kitchen Detergents].

We modified a method for determining methanol content in detergents used in kitchens. Furthermore, an inter-laboratory study was conducted in 10 laboratories to validate the modified method. In this study, two concentrations of samples were blindly coded. Each laboratory determined the methanol content in each sample according to a protocol. The determined values were statistically analyzed according to an international harmonized guideline. HorRat values were calculated based on the reproducibility relative standard deviation (RSDR) which was estimated from the interlaboratory study, and predicted RSDR calculated from the Horwitz/Thompson equation. The HorRat values of the two samples were 0.8 and 1.8, meeting the performance criteria of less than 2 set by the Codex Alimentarius for analytical method approval. These results confirm that this modified analytical method shows good performance as an analytical method for determining methanol content in kitchen detergents.

[Validation Study on Migration Test for Plastic Food Utensils, Containers, and Packaging].

Migration test of food utensils, containers, and packaging is an important test method for confirming the safety and their compliance to the standards. However, there is little report on inter-laboratory study which was performed to evaluate the entire migration test, including migration operations and quantification. An interlaboratory study was performed participating 22 laboratories using 8 types of model synthetic resin samples containing 10 substances with a wide range of Log Pow values to evaluate the accuracy of the entire migration test. As a result, most of HorRat (r) values met the target criteria (0.3

Effect of the cation structure on cellulose dissolution in aqueous solutions of organic onium hydroxides.

The solubility of cellulose was systematically assessed in organic onium/inium hydroxide aqueous solutions (OHAS) having assorted cations, such as phosphonium, ammonium, piperidinium, morpholinium, pyrrolidinium, and cholinium. From a dissolution test of cellulose in OHAS, it was confirmed that the single most important factor in the dissolution is the high concentration of OHAS. In addition, having a weaker hydrogen bond network around OH and H2O was found to be important to facilitate the cellulose dissolution. In NMR analysis, the OHAS with an excellent cellulose solubility, such as tetrabutylphosphonium hydroxide ([P4444]OH), exhibited a chemical shift of water (δH2O) integrated with that of OH in the low frequency region (∼4.9 ppm), while choline hydroxide ([Ch]OH) with poor cellulose solubility showed δH2O higher than 5.2 ppm. A higher δH2O means that the protons are deshielded due to a stronger hydrogen bond network around H2O and OH, which indicates a strong self-associating property of OHAS that is unfavourable for the cellulose dissolution. Assuming that the strong self-associating property can be reduced by improving the hydrophobicity of organic cations, the methyl group in N-butyl-N-methylmorpholinium hydroxide ([Mor14]OH) was replaced by a butyl chain to shield the positive charge. While [Mor14]OH dissolved only 5 wt% of cellulose, the solubility in the synthesised OHAS, N,N-dibutylmorpholinium hydroxide ([Mor44]OH), was successfully improved to 20 wt%. In the present paper, cellulose solubility was also analysed in relation to the Kamlet-Taft parameters.

[Validation Study on Developed Methods for Total Organic Carbon in Some Kinds of Mineral Water].

Total organic carbon (TOC) was measured in some kinds of mineral water, and the method was validated. In mineral water, there are many kinds of elements such as carbon dioxide and a wide range of hardness. The official method for amount of TOC in tap water was validated in non-carbonated mineral water regardless of the degree of hardness. However, the amount of TOC was not accurately measured in two kinds of carbonated mineral water with medium or high degree of hardness. In our method of this study, the removal of carbon dioxide from the two kinds of mineral water was achieved by making bubbling time longer and additive rate of HCl upper than the official condition of tap water. And then, the method we developed was validated in the two kinds of mineral water. Our results suggested that the method we developed could be useful to measure the amount of TOC in many kinds of mineral water on the market.

Crystal Structure of the Catalytic and Cytochrome b Domains in a Eukaryotic Pyrroloquinoline Quinone-Dependent Dehydrogenase.

Pyrroloquinoline quinone (PQQ) was discovered as a redox cofactor of prokaryotic glucose dehydrogenases in the 1960s, and subsequent studies have demonstrated its importance not only in bacterial systems but also in higher organisms. We have previously reported a novel eukaryotic quinohemoprotein that exhibited PQQ-dependent catalytic activity in a eukaryote. The enzyme, pyranose dehydrogenase (PDH), from the filamentous fungus Coprinopsis cinerea (CcPDH) of the Basidiomycete division, is composed of a catalytic PQQ-dependent domain classified as a member of the novel auxiliary activity family 12 (AA12), an AA8 cytochrome b domain, and a family 1 carbohydrate-binding module (CBM1), as defined by the Carbohydrate-Active Enzymes (CAZy) database. Here, we present the crystal structures of the AA12 domain in its apo- and holo-forms and the AA8 domain of this enzyme. The crystal structures of the holo-AA12 domain bound to PQQ provide direct evidence that eukaryotes have PQQ-dependent enzymes. The AA12 domain exhibits a six-blade ß-propeller fold that is also present in other known PQQ-dependent glucose dehydrogenases in bacteria. A loop structure around the active site and a calcium ion binding site are unique among the known structures of bacterial quinoproteins. The AA8 cytochrome domain has a positively charged area on its molecular surface, which is partly due to the propionate group of the heme interacting with Arg181; this feature differs from the characteristics of cytochrome b in the AA8 domain of the fungal cellobiose dehydrogenase and suggests that this difference may affect the pH dependence of electron transfer.IMPORTANCE Pyrroloquinoline quinone (PQQ) is known as the "third coenzyme" following nicotinamide and flavin. PQQ-dependent enzymes have previously been found only in prokaryotes, and the existence of a eukaryotic PQQ-dependent enzyme was in doubt. In 2014, we found an enzyme in mushrooms that catalyzes the oxidation of various sugars in a PQQ-dependent manner and that was a PQQ-dependent enzyme found in eukaryotes. This paper presents the X-ray crystal structures of this eukaryotic PQQ-dependent quinohemoprotein, which show the active site, and identifies the amino acid residues involved in the binding of the cofactor PQQ. The presented X-ray structures reveal that the AA12 domain is in a binary complex with the coenzyme, clearly proving that PQQ-dependent enzymes exist in eukaryotes as well as prokaryotes. Because no biosynthetic system for PQQ has been reported in eukaryotes, future research on the symbiotic systems is expected.

Effects of charge balance and hydrophobicity of the surface of cytochrome c on the distribution behaviour in an ionic liquid/buffer biphasic system.

Factors contributing to the different distribution behaviour of cytochrome c were investigated in a biphasic tetrabutylphosphonium 2,4,6-trimethylbenzenesulfonate and potassium phosphate buffer system, which shows a lower critical solution temperature. To change charge balance and hydrophobicity of cytochrome c, surface modification with a few modifier molecules was applied. Surface charge and hydrophobicity affected the distribution behavior of chemically modified cytochrome c in the tetrabutylphosphonium 2,4,6-trimethylbenzenesulfonate and potassium phosphate buffer biphasic system. The distribution ratio into tetrabutylphosphonium 2,4,6-trimethylbenzenesulfonate decreased with decreasing isoelectric point of cytochrome c. Furthermore, cytochrome c possessing a low isoelectric point showed different distribution ratio depending on surface hydrophobicity. Taken together, these findings indicate that isoelectric point and surface hydrophobicity of cytochrome c are important factors controlling the distribution behavior in temperature sensitive biphasic systems.

Design and properties of functional zwitterions derived from ionic liquids.

A zwitterion, an ion pair where cation and anion are covalently tethered, is known to be a type of salt. These ions have not been recognised as interesting, but they are physicochemically unique and fascinating ions. In the present review, some functional zwitterions derived from ionic liquids are mentioned to emphasise the usefulness of the tethering of the component cations and anions of ionic liquids. Basic properties, advantages and disadvantages after the functional design of zwitterions, and some applications are summarised.

A method of expression for an oxygen-tolerant group III alcohol dehydrogenase from Pyrococcus horikoshii OT3.

NAD(P)-dependent group III alcohol dehydrogenases (ADHs), well known as iron-activated enzymes, generally lose their activities under aerobic conditions due to their oxygen-sensitivities. In this paper, we expressed an extremely thermostable group III ADH from the hyperthermophilic archaeon Pyrococcus horikoshii OT3 (PhADH) heterologously in Escherichia coli. When purified from a culture medium containing nickel, the recombinant PhADH (Ni-PhADH) contained 0.85 ± 0.01 g-atoms of nickel per subunit. Ni-PhADH retained high activity under aerobic conditions (9.80 U mg-1), while the enzyme expressed without adding nickel contained 0.46 ± 0.01 g-atoms of iron per subunit and showed little activity (0.27 U mg-1). In the presence of oxygen, the activity of the Fe2+-reconstituted PhADH prepared from the Ni-PhADH was gradually decreased, whereas the Ni2+-reconstituted PhADH maintained enzymatic activity. These results indicated that PhADH with bound nickel ion was stable in oxygen. The activity of the Ni2+-reconstituted PhADH prepared from the expression without adding nickel was significantly lower than that from the Ni-PhADH, suggesting that binding a nickel ion to PhADH in this expression system contributed to protecting against inactivation during the expression and purification processes. Unlike other thermophilic group III ADHs, Ni-PhADH showed high affinity for NAD(H) rather than NADP(H). Furthermore, it showed an unusually high k cat value toward aldehyde reduction. The activity of Ni-PhADH for butanal reduction was increased to 60.7 U mg-1 with increasing the temperature to 95 °C. These findings provide a new strategy to obtain oxygen-sensitive group III ADHs.

Quantitative assessment of kosmotropicity of hydrated ionic liquids by nuclear magnetic resonance.

Nuclear magnetic resonance studies revealed that the chemical shift of H2O in hydrated ionic liquids varied with their component ions. The variation reflected the formation of hydrogen bonding networks between ions and water molecules. The chemical shift relative to bulk water was used to quantitatively assess the kosmotropicity.

pH-dependent electron transfer reaction and direct bioelectrocatalysis of the quinohemoprotein pyranose dehydrogenase.

A pyranose dehydrogenase from Coprinopsis cinerea (CcPDH) is an extracellular quinohemoeprotein, which consists a b-type cytochrome domain, a pyrroloquinoline-quinone (PQQ) domain, and a family 1-type carbohydrate-binding module. The electron transfer reaction of CcPDH was studied using some electron acceptors and a carbon electrode at various pH levels. Phenazine methosulfate (PMS) reacted directly at the PQQ domain, whereas cytochrome c (cyt c) reacted via the cytochrome domain of intact CcPDH. Thus, electrons are transferred from reduced PQQ in the catalytic domain of CcPDH to heme b in the N-terminal cytochrome domain, which acts as a built-in mediator and transfers electron to a heterogenous electron transfer protein. The optimal pH values of the PMS reduction (pH 6.5) and the cyt c reduction (pH 8.5) differ. The catalytic currents for the oxidation of l-fucose were observed within a range of pH 4.5 to 11. Bioelectrocatalysis of CcPDH based on direct electron transfer demonstrated that the pH profile of the biocatalytic current was similar to the reduction activity of cyt c characters.

Zwitterion/Brønsted Acid Mixtures Showing Controlled Lower Critical Solution Temperature-Type Phase Changes with Water.

A new ammonium-type zwitterion (ZI), N,N-dihexyl-N-monopentyl-3-sulfonyl-1-propaneammonium (N665 C3S) with adequate hydrophobicity showed reversible and highly temperature-sensitive lower critical solution temperature (LCST)-type phase transitions after being mixed with pure water. Generally for such compounds, those with longer alkyl chains were immiscible with water and those with shorter chains were miscible with water, regardless of temperature. A slightly more hydrophobic ZI than N665 C3S showed LCST-type phase behavior with water when it was mixed with equimolar amounts of a Brønsted acid such as trifluoromethanesulfonic acid (HTfO). The phase-transition temperature of the ZI/Brønsted acid mixed aqueous solution was controllable by water content.

Thermoresponsive Poly(Ionic Liquid)s in Aqueous Salt Solutions: Salting-Out Effect on Their Phase Behavior and Water Absorption/Desorption Properties.

Here, a thermoresponsive phase behavior of polymerized ionic liquids (PILs) composed of poly([tri-n-alkyl(vinylbenzyl)phosphonium]chloride) (poly([Pnnn VB ]Cl) is reported, where n (the number of carbon atoms of an alkyl chain) = 4, 5, or 6 after mixing with aqueous sodium chloride solutions. Both monomeric [P555VB ]Cl and the resulting poly([P555VB ]Cl) linear homopolymer show a lower critical solution temperature (LCST)-type phase behavior in aq. NaCl solutions. The phase transition temperature of the PIL shifts to lower value by increasing concentration of NaCl. Also the swelling degree of cross-linked poly([P555VB ]Cl) gel decreases by increasing NaCl concentration, clearly suggesting the "salting-out" effect of NaCl results in a significant dehydration of the poly([P555VB ]Cl) gel. The absorbed water in the PIL gel is desorbed by moderate heating via the LCST behavior, and the absolute absorption/desorption amount is improved by copolymerization of [P555VB ]Cl with more hydrophilic [P444VB ]Cl monomer.

Dielectric relaxations of polyether-based polyurethanes containing ionic liquids as antistatic agents.

Dielectric properties of polyurethanes containing poly(propylene oxide) (PO) and poly(ethylene oxide) (EO) units are discussed, along with the results of direct current (DC) measurements and broadband electrical spectroscopy (BES) studies. The dielectric properties of polyether-containing polyurethanes (PUs) are compared to those of PUs containing 1000 ppm of ionic liquids (ILs) as antistatic agents. The effects of the chemical environment of these ILs, including anion-fixed polymers (PU-AF), cation-fixed polymers (PU-CF), and a simple mixture of IL with the PUs (PU-IL), are compared and discussed on the basis of ion mobility. DC measurements suggest that the charge current is attributed not only to the electrode polarization but also to continuous dielectric relaxation. BES studies elucidate that both fast and slow relaxations are taking place in EO-rich domains in pristine PU and PU-AF. The activation energies of the slow relaxation and of the ionic conductivity are similar, suggesting that the ionic conductivity of these materials is attributed to the ion exchange reaction in EO/ion complexes. In contrast, only fast relaxations are observed in the domains mostly comprised of ion-depleted EO in the PUs containing "free" anions, i.e., PU-CF and PU-IL. This suggests that [Tf2N](-) ligands are weakly interacting with the EO chains and contribute effectively to the ion conduction. Thus, enhanced ionic conductivity is observed in PU-CF and PU-IL, yielding sufficient antistatic effects. Taking into account its long shelf life, arising from the lack of IL bleed-out, PU-CF is concluded to be the most promising candidate.

A novel pyrroloquinoline quinone-dependent 2-keto-D-glucose dehydrogenase from Pseudomonas aureofaciens.

A gene encoding an enzyme similar to a pyrroloquinoline quinone (PQQ)-dependent sugar dehydrogenase from filamentous fungi, which belongs to new auxiliary activities (AA) family 12 in the CAZy database, was cloned from Pseudomonas aureofaciens. The deduced amino acid sequence of the cloned enzyme showed only low homology to previously characterized PQQ-dependent enzymes, and multiple-sequence alignment analysis showed that the enzyme lacks one of the three conserved arginine residues that function as PQQ-binding residues in known PQQ-dependent enzymes. The recombinant enzyme was heterologously expressed in an Escherichia coli expression system for further characterization. The UV-visible (UV-Vis) absorption spectrum of the oxidized form of the holoenzyme, prepared by incubating the apoenzyme with PQQ and CaCl2, revealed a broad peak at approximately 350 nm, indicating that the enzyme binds PQQ. With the addition of 2-keto-d-glucose (2KG) to the holoenzyme solution, a sharp peak appeared at 331 nm, attributed to the reduction of PQQ bound to the enzyme, whereas no effect was observed upon 2KG addition to authentic PQQ. Enzymatic assay showed that the recombinant enzyme specifically reacted with 2KG in the presence of an appropriate electron acceptor, such as 2,6-dichlorophenol indophenol, when PQQ and CaCl2 were added. (1)H nuclear magnetic resonance ((1)H-NMR) analysis of reaction products revealed 2-keto-d-gluconic acid (2KGA) as the main product, clearly indicating that the recombinant enzyme oxidizes the C-1 position of 2KG. Therefore, the enzyme was identified as a PQQ-dependent 2KG dehydrogenase (Pa2KGDH). Considering the high substrate specificity, the physiological function of Pa2KGDH may be for production of 2KGA.

Ionic Switch Induced by a Rectangular-Hexagonal Phase Transition in Benzenammonium Columnar Liquid Crystals.

We demonstrate switching of ionic conductivities in wedge-shaped liquid-crystalline (LC) ammonium salts. A thermoreversible phase transition between the rectangular columnar (Colr) and hexagonal columnar (Colh) phases is used for the switch. The ionic conductivities in the Colh phase are about four orders of magnitude higher than those in the Colr phase. The switching behavior of conductivity can be ascribed to the structural change of assembled ionic channels. X-ray experiments reveal a highly ordered packing of the ions in the Colr phase, which prevents the ion transport.

Is seven the minimum number of water molecules per ion pair for assured biological activity in ionic liquid-water mixtures?

Ionic liquids (ILs) containing small amounts of water are called hydrated ILs and they show diverse physico-chemical properties that are strongly dependent on their water content. Some properties of hydrated ILs, such as biological activity and phase transition behaviour, were found to change non-linearly, with an inflection at a water molecule to ion pair ratio of around 7:1. This critical hydration number of ILs has been discussed in this paper with respect to the state of solvated water molecules.