Understanding asymmetric switching times in accumulation mode organic electrochemical transistors.

Understanding the factors underpinning device switching times is crucial for the implementation of organic electrochemical transistors in neuromorphic computing, bioelectronics and real-time sensing applications. Existing models of device operation cannot explain the experimental observations that turn-off times are generally much faster than turn-on times in accumulation mode organic electrochemical transistors. Here, using operando optical microscopy, we image the local doping level of the transistor channel and show that turn-on occurs in two stages-propagation of a doping front, followed by uniform doping-while turn-off occurs in one stage. We attribute the faster turn-off to a combination of engineering as well as physical and chemical factors including channel geometry, differences in doping and dedoping kinetics and the phenomena of carrier-density-dependent mobility. We show that ion transport limits the operation speed in our devices. Our study provides insights into the kinetics of organic electrochemical transistors and guidelines for engineering faster organic electrochemical transistors.

A Reversible Structural Phase Transition by Electrochemically-Driven Ion Injection into a Conjugated Polymer.

We find that conjugated polymers can undergo reversible structural phase transitions during electrochemical oxidation and ion injection. We study poly[2,5-bis(thiophenyl)-1,4-bis(2-(2-(2-methoxyethoxy)ethoxy)ethoxy)benzene] (PB2T-TEG), a conjugated polymer with glycolated side chains. Using grazing incidence wide-angle X-ray scattering (GIWAXS), we show that, in contrast to previously known polymers, this polymer switches between two structurally distinct crystalline phases associated with electrochemical oxidation/reduction in an aqueous electrolyte. Importantly, we show that this unique phase change behavior has important physical consequences for ion-polaron pair transport. Notably, using moving front experiments visualized by both optical microscopy and super-resolution photoinduced force microscopy (PiFM), we show that a laterally propagating ion-polaron pair front in PB2T-TEG exhibits non-Fickian transport, retaining a sharp step-edge profile, in stark contrast to the Fickian diffusion more commonly observed in polymers like P3MEEMT. This structural phase transition is reminiscent of those accompanying ion uptake in inorganic materials like LiFePO4. We propose that the engineering of similar properties in future conjugated polymers may enable the realization of new materials with superior performance in electrochemical energy storage or neuromorphic memory applications.

Generalizable Framework for Algorithmic Interpretation of Thin Film Morphologies in Scanning Probe Images.

We describe an open-source and widely adaptable Python library that recognizes morphological features and domains in images collected via scanning probe microscopy. π-Conjugated polymers (CPs) are ideal for evaluating the Materials Morphology Python (m2py) library because of their wide range of morphologies and feature sizes. Using thin films of nanostructured CPs, we demonstrate the functionality of a general m2py workflow. We apply numerical methods to enhance the signals collected by the scanning probe, followed by Principal Component Analysis (PCA) to reduce the dimensionality of the data. Then, a Gaussian Mixture Model segments every pixel in the image into phases, which have similar material-property signals. Finally, the phase-labeled pixels are grouped and labeled as morphological domains using either connected components labeling or persistence watershed segmentation. These tools are adaptable to any scanning probe measurement, so the labels that m2py generates will allow researchers to individually address and analyze the identified domains in the image. This level of control, allows one to describe the morphology of the system using quantitative and statistical descriptors such as the size, distribution, and shape of the domains. Such descriptors will enable researchers to quantitatively track and compare differences within and between samples.

Polymer Crystallinity Controls Water Uptake in Glycol Side-Chain Polymer Organic Electrochemical Transistors.

We study poly(3-{[2-(2-methoxyethoxy)ethoxy]methyl}thiophene-2,5-diyl) (P3MEEMT), a new polythiophene derivative with ethylene glycol-based side chains, as a promising semiconducting polymer for accumulation-mode organic electrochemical transistors (OECTs) with figures of merit comparable to those of state-of-the-art materials. By characterizing the OECT performance of P3MEEMT transistors as a function of the anion, we find that large hydrophobic anions lower the threshold voltage. We find that, compared to poly(3-hexylthiophene-2,5-diyl) (P3HT), P3MEEMT has faster anion injection rates, which we attribute to the hydration of the P3MEEMT crystal lattice. We study P3MEEMT-based OECT and organic field-effect transistor (OFET) performance as a function of film crystallinity and show that changing the crystallinity of the polymer by thermal annealing increases the OFET mobility yet decreases the OECT mobility. We attribute this difference to the fact that, unlike OFETs, OECTs operate in aqueous environments. To probe how hydration affects the operation of OECTs, we investigate the role of water in electrochemical doping using electrochemical quartz microbalance (EQCM) gravimetry. We find that steady-state hydration and hydration dynamics under electrochemical bias differ dramatically between the crystalline and amorphous P3MEEMT films. These results suggest that the presence of water reduces the electronic connectivity between the crystalline regions of P3MEEMT, thus lowering the mobility in solution. Overall, our study highlights the importance of the role of polymer hydration and nanoscale morphology in elucidating design principles for OECT operation.

Influence of Side Chain Interdigitation on Strain and Charge Mobility of Planar Indacenodithiophene Copolymers.

Indacenodithiophene (IDT) copolymers are a class of conjugated polymers that have limited long-range order and high hole mobilities, which makes them promising candidates for use in deformable electronic devices. Key to their high hole mobilities is the coplanar monomer repeat units within the backbone. Poly(indacenodithiophene-benzothiadiazole) (PIDTC16-BT) and poly(indacenodithiophene-thiapyrollodione) (PIDTC16-TPDC1) are two IDT copolymers with planar backbones, but they are brittle at low molecular weight and have unsuitably high elastic moduli. Substitution of the hexadecane (C16) side chains of the IDT monomer with isocane (C20) side chains was performed to generate a new BT-containing IDT copolymer: PIDTC20-BT. Substitution of the methyl (C1) side chain on the TPD monomer for an octyl (C8) and 6-ethylundecane (C13B) afford two new TPD-containing IDT copolymers named PIDTC16-TPDC8 and PIDTC16-TPDC13B, respectively. Both PIDTC16-TPDC8 and PIDTC16-TPDC13B are relatively well deformable, have a low yield strain, and display significantly reduced elastic moduli. These mechanical properties manifest themselves because the lengthened side chains extending from the TPD-monomer inhibit precise intermolecular ordering. In PIDTC16-BT, PIDTC20-BT and PIDTC16-TPDC1 side chain ordering can occur because the side chains are only present on the IDT subunit, but this results in brittle thin films. In contrast, PIDTC16-TPDC8 and PIDTC16-TPDC13B have disordered side chains, which seems to lead to low hole mobilities. These results suggest that disrupting the interdigitation in IDT copolymers through comonomer side chain extension leads to more ductile thin films with lower elastic moduli, but decreased hole mobility because of altered local order in the respective thin films. Our work, thus, highlights the trade-off between molecular packing structure for deformable electronic materials and provides guidance for designing new conjugated polymers for stretchable electronics.

In Situ Studies of the Swelling by an Electrolyte in Electrochemical Doping of Ethylene Glycol-Substituted Polythiophene.

Organic mixed ionic electronic conductors (OMIECs) have the potential to enable diverse new technologies, ranging from biosensors to flexible energy storage devices and neuromorphic computing platforms. However, a study of these materials in their operating state, which convolves both passive and potential-driven solvent, cation, and anion ingress, is extremely difficult, inhibiting rational material design. In this report, we present a novel approach to the in situ studies of the electrochemical switching of a prototypical OMIEC based on oligoethylene glycol (oEG) substitution of semicrystalline regioregular polythiophene via grazing-incidence X-ray scattering. By studying the crystal lattice both dry and in contact with the electrolyte while maintaining potential control, we can directly observe the evolution of the crystalline domains and their relationship to film performance in an electrochemically gated transistor. Despite the oEG side-chain enabling bulk electrolyte uptake, we find that the crystalline regions are relatively hydrophobic, exhibiting little (less than one water per thiophene) swelling of the undoped polymer, suggesting that the amorphous regions dominate the reported passive swelling behavior. With applied potential, we observe that the π-π separation in the crystals contracts while the lamella spacing increases in a balanced fashion, resulting in a negligible change in the crystal volume. The potential-induced changes in the crystal structure do not clearly correlate to the electrical performance of the film as an organic electrochemical transistor, suggesting that the transistor performance is strongly influenced by the amorphous regions of the film.

Role of Postdeposition Thermal Annealing on Intracrystallite and Intercrystallite Structuring and Charge Transport in Poly(3-hexylthiophene).

The performance of electronic devices comprising conjugated polymers as the active layer depends not only on the intrinsic characteristics of the materials but also on the details of the extrinsic processing conditions. In this study, we examine the effect of postdeposition thermal treatments on the microstructure of poly(3-hexylthiophene) (P3HT) thin films and its impact on their electrical properties. Unsurprisingly, we find thermal annealing of P3HT thin films to generally increase their crystallinity and crystallite coherence length while retaining the same crystal structure. Despite such favorable structural improvements of the polymer active layers, however, thermal annealing at high temperatures can lead to a net reduction in the mobility of transistors, implicating structural changes in the intercrystallite amorphous regions of these semicrystalline active layers take place on annealing, and the simplistic picture that crystallinity governs charge transport is not always valid. Our results instead suggest tie-chain pullout, which occurs during crystal growth and perfection upon thermal annealing to govern charge transport, particularly in low-molecular-weight systems in which the tie-chain fraction is low. By demonstrating the interplay between intracrystallite and intercrystallite structuring in determining the macroscopic charge transport, we shed light on how structural evolution and charge-transport properties of nominally the same polymer can vary depending on the details of processing.

Dynamic reaction-induced phase separation in tunable, adaptive covalent networks.

A series of catalyst-free, room temperature dynamic bonds derived from a reversible thia-Michael reaction are utilized to access mechanically robust dynamic covalent network films. The equilibrium of the thiol addition to benzalcyanoacetate-based Michael-acceptors can be directly tuned by controlling the electron-donating/withdrawing nature of the Michael-acceptor. By modulating the composition of different Michael-acceptors in a dynamic covalent network, a wide range of mechanical properties and thermal responses can be realized. Additionally, the reported systems phase-separate in a process, coined dynamic reaction-induced phase separation (DRIPS), that yields reconfigurable phase morphologies and reprogrammable shape-memory behaviour as highlighted by the heat-induced folding of a predetermined structure.