Heterometallic Molecular Complexes Act as Messenger Building Units to Encode Desired Metal-Atom Combinations to Multivariate Metal-Organic Frameworks.

A novel synthetic approach is described for the targeted preparation of multivariate metal-organic frameworks (MTV-MOFs) with specific combinations of metal elements. This methodology is based on the use of molecular complexes that already comprise desired metal-atom combinations, as building units for the MTV-MOF synthesis. These units are transformed into the MOF structural constituents through a ligand/linker exchange process that involves structural modifications while preserving their originally encoded atomic combination. Thus, through the use of heterometallic ring-shaped molecules combining gallium and nickel or cobalt, we have obtained MOFs with identical combinations of the metal elements, now incorporated in the rod-shaped secondary building unit, as confirmed with a combination of X-ray and electron diffraction, electron microscopy, and X-ray absorption spectroscopy techniques.

Tuning mono-divalent cation water composition by the capacitive ion-exchange mechanism.

Soil salinization poses a significant challenge to agricultural activities. To address this, the agricultural industry seeks an irrigation water solution that reduces both ionic conductivity and sodium adsorption rate (SAR), thereby diminishing the risks of soil sodification and fostering sustainable crop production. Capacitive deionization (CDI) is an attractive electrochemical technology to advance this search. Recently, a one-dimensional transient CDI model unveiled a capacitive ion-exchange mechanism presenting the potential to adjust the treated water composition by modifying monovalent and divalent cation concentrations, thereby influencing the SAR index. This behavior would be achieved by using electrodes rich in surface functional groups able to efficiently capture divalent cations during conditioning and releasing them during charging while capturing monovalent ions. Beyond the theoretical modelling, the current experimental research demonstrates, for the first time, the effectiveness of the capacitive ion-exchange mechanism in a CDI pilot plant using real water samples spiked with solutions containing specific mono and divalent ions. Electrosorption experiments and computational modeling, specifically Density-Functional Theory (DFT), were used along with the analysis of the surface functional groups present in the electrodes to describe the capacitive ion-exchange phenomenon and validate the steps involved on it, highlighting the conditioning as a critical step. Various operational and flow modes confirm the versatility of CDI technology, achieving separation factors (RMg/Na) of 5-6 in batch, raising production from 0.5 to 0.8 L m-2 h-1 (batch) to 8.0-8.1 L m-2 h-1 when using single pass although reducing RMg/Na to 2. The reliability of the CDI technology in reducing SAR was also successfully tested with different influent compositions, including magnesium and calcium. Finally, the robustness of the capacitive ion-exchange mechanism was validated by a second CDI laboratory 9-cell stack cycled over 350 cycles. Our results confirm the reported theoretical model and expands the conclusions through the experiments in a pilot plant showing direct implications for employing CDI in agricultural applications.

Triple Play of Band Gap, Interband, and Plasmonic Excitations for Enhanced Catalytic Activity in Pd/HxMoO3 Nanoparticles in the Visible Region.

Plasmonic photocatalysis has been limited by the high cost and scalability of plasmonic materials, such as Ag and Au. By focusing on earth-abundant photocatalyst/plasmonic materials (HxMoO3) and Pd as a catalyst, we addressed these challenges by developing a solventless mechanochemical synthesis of Pd/HxMoO3 and optimizing photocatalytic activities in the visible range. We investigated the effect of HxMoO3 band gap excitation (at 427 nm), Pd interband transitions (at 427 nm), and HxMoO3 localized surface plasmon resonance (LSPR) excitation (at 640 nm) over photocatalytic activities toward the hydrogen evolution and phenylacetylene hydrogenation as model reactions. Although both excitation wavelengths led to comparable photoenhancements, a 110% increase was achieved under dual excitation conditions (427 + 640 nm). This was assigned to a synergistic effect of optical excitations that optimized the generation of energetic electrons at the catalytic sites. These results are important for the development of visible-light photocatalysts based on earth-abundant components.

Dynamic restructuring of nickel sulfides for electrocatalytic hydrogen evolution reaction.

Transition metal chalcogenides have been identified as low-cost and efficient electrocatalysts to promote the hydrogen evolution reaction in alkaline media. However, the identification of active sites and the underlying catalytic mechanism remain elusive. In this work, we employ operando X-ray absorption spectroscopy and near-ambient pressure X-ray photoelectron spectroscopy to elucidate that NiS undergoes an in-situ phase transition to an intimately mixed phase of Ni3S2 and NiO, generating highly active synergistic dual sites at the Ni3S2/NiO interface. The interfacial Ni is the active site for water dissociation and OH* adsorption while the interfacial S acts as the active site for H* adsorption and H2 evolution. Accordingly, the in-situ formation of Ni3S2/NiO interfaces enables NiS electrocatalysts to achieve an overpotential of only 95 ± 8 mV at a current density of 10 mA cm-2. Our work highlighted that the chemistry of transition metal chalcogenides is highly dynamic, and a careful control of the working conditions may lead to the in-situ formation of catalytic species that boost their catalytic performance.

Synergistic binding sites in a metal-organic framework for the optical sensing of nitrogen dioxide.

Luminescent metal-organic frameworks are an emerging class of optical sensors, able to capture and detect toxic gases. Herein, we report the incorporation of synergistic binding sites in MOF-808 through post-synthetic modification with copper for optical sensing of NO2 at remarkably low concentrations. Computational modelling and advanced synchrotron characterization tools are applied to elucidate the atomic structure of the copper sites. The excellent performance of Cu-MOF-808 is explained by the synergistic effect between the hydroxo/aquo-terminated Zr6O8 clusters and the copper-hydroxo single sites, where NO2 is adsorbed through combined dispersive- and metal-bonding interactions.

Impact of NiCo2O4/SrTiO3 p-n Heterojunctions on the Interface of Photoelectrochemical Water Oxidation.

Forming semiconductor heterojunctions is a promising strategy to boost the efficiency of solar-driven photoelectrochemical (PEC) water splitting by accelerating the separation and transport of photogenerated charge carriers via an interfacial electric field. However, there is limited research considering the influence of electrolytes on the band alignment of the heterojunction under PEC conditions. In this work, we use a single crystal NiCo2O4/SrTiO3 (NCO/STO) heterojunction with atomic-precision controlled thickness as a model photoelectrode to study the band structure modulations upon getting in contact with the electrolyte and the correlation with the PEC activity. It is found that the band alignment can be tuned by the control of p-n heterojunction film thickness and regulated by the water redox potential (Eredox). When the Fermi level (EF) of the heterojunction is higher/lower than the Eredox, the band bending at the NCO/STO-electrolyte interface will increase/decrease after contacting with the electrolyte. However, when the band bending width of the NCO layer is thinner than its thickness, the electrolyte will not influence the band alignment at the NCO/STO interface. In addition, PEC characterization results show that the 1 nm NCO/STO heterojunction photoanode exhibits superior water-splitting performance, owing to the optimum band structure of the p-n heterojunction and the shorter charge transfer distance.

Improved Methane Production by Photocatalytic CO2 Conversion over Ag/In2O3/TiO2 Heterojunctions.

In this work, the role of In2O3 in a heterojunction with TiO2 is studied as a way of increasing the photocatalytic activity for gas-phase CO2 reduction using water as the electron donor and UV irradiation. Depending on the nature of the employed In2O3, different behaviors appear. Thus, with the high crystallite sizes of commercial In2O3, the activity is improved with respect to TiO2, with modest improvements in the selectivity to methane. On the other hand, when In2O3 obtained in the laboratory, with low crystallite size, is employed, there is a further change in selectivity toward CH4, even if the total conversion is lower than that obtained with TiO2. The selectivity improvement in the heterojunctions is attributed to an enhancement in the charge transfer and separation with the presence of In2O3, more pronounced when smaller particles are used as in the case of laboratory-made In2O3, as confirmed by time-resolved fluorescence measurements. Ternary systems formed by these heterojunctions with silver nanoparticles reflect a drastic change in selectivity toward methane, confirming the role of silver as an electron collector that favors the charge transfer to the reaction medium.

Laser-Reduced BiVO4 for Enhanced Photoelectrochemical Water Splitting.

The present study proposes a laser irradiation method to superficially reduce BiVO4 photoelectrodes and boost their water oxidation reaction performance. The origin of this enhanced performance toward oxygen evolution reaction (OER) was studied using a combination of a suite of structural, chemical, and mechanistic advanced characterization techniques including X-ray photoelectron (XPS), X-ray absorption spectroscopy (XAS), electrochemical impedance spectroscopy (EIS), and transient absorption spectroscopy (TAS), among others. We found that the reduction of the material is localized at the surface of the sample and that this effect creates effective n-type doping and a shift to more favorable energy band positions toward water oxidation. This thermodynamic effect, together with the change in sample morphology to larger and denser domains, results in an extended lifetime of the photogenerated carriers and improved charge extraction. In addition, the stability of the reduced sample in water was also confirmed. All of these effects result in a two-fold increase in the photocurrent density of the laser-treated samples.

Highly Active and Stable Ni/La-Doped Ceria Material for Catalytic CO2 Reduction by Reverse Water-Gas Shift Reaction.

The design of an active, effective, and economically viable catalyst for CO2 conversion into value-added products is crucial in the fight against global warming and energy demand. We have developed very efficient catalysts for reverse water-gas shift (rWGS) reaction. Specific conditions of the synthesis by combustion allow the obtention of macroporous materials based on nanosized Ni particles supported on a mixed oxide of high purity and crystallinity. Here, we show that Ni/La-doped CeO2 catalysts─with the "right" Ni and La proportions─have an unprecedented catalytic performance per unit mass of catalyst for the rWGS reaction as the first step toward CO2 valorization. Correlations between physicochemical properties and catalytic activity, obtained using a combination of different techniques such as X-ray and neutron powder diffraction, Raman spectroscopy, in situ near ambient pressure X-ray photoelectron spectroscopy, electron microscopy, and catalytic testing, point out to optimum values for the Ni loading and the La proportion. Density functional theory calculations of elementary steps of the reaction on model Ni/ceria catalysts aid toward the microscopic understanding of the nature of the active sites. This finding offers a fundamental basis for developing economical catalysts that can be effectively used for CO2 reduction with hydrogen. A catalyst based on Ni0.07/(Ce0.9La0.1Ox)0.93 shows a CO production of 58 × 10-5 molCO·gcat-1·s-1 (700 °C, H2/CO2 = 2; selectivity to CO > 99.5), being stable for 100 h under continuous reaction.

Electronic basis of visible region activity in high area Sn-doped rutile TiO2 photocatalysts.

The influence of Sn doping on the anatase-to-rutile phase transition has been investigated in high area powders prepared by a sol-gel route involving alkoxide precursors. Sn doping facilitates conversion of anatase to rutile at lower temperatures than observed for undoped material. At the same time Sn-doping inhibits sintering as gauged by line widths in X-ray diffraction and gas-adsorption surface area measurements. These observations are linked to the finding of pronounced segregation of Sn to the surface of rutile TiO(2) observed in X-ray photoemission spectra. Sn-doped TiO(2) is found to exhibit enhanced visible region photocatalytic activity as compared with undoped material in dye degradation experiments. This is attributed to narrowing of the bulk bandgap at low doping levels coupled with the introduction of surface states associated with segregated Sn ions in the divalent state. The Sn(II) surface states lie above the top of the main valence band and can therefore act as trapping sites for holes produced under photoexcitation.

Twin boundary migration in an individual platinum nanocrystal during catalytic CO oxidation.

At the nanoscale, elastic strain and crystal defects largely influence the properties and functionalities of materials. The ability to predict the structural evolution of catalytic nanocrystals during the reaction is of primary importance for catalyst design. However, to date, imaging and characterising the structure of defects inside a nanocrystal in three-dimensions and in situ during reaction has remained a challenge. We report here an unusual twin boundary migration process in a single platinum nanoparticle during CO oxidation using Bragg coherent diffraction imaging as the characterisation tool. Density functional theory calculations show that twin migration can be correlated with the relative change in the interfacial energies of the free surfaces exposed to CO. The x-ray technique also reveals particle reshaping during the reaction. In situ and non-invasive structural characterisation of defects during reaction opens new avenues for understanding defect behaviour in confined crystals and paves the way for strain and defect engineering.

A critical evaluation of the mode of incorporation of nitrogen in doped anatase photocatalysts.

A range of sol-gel synthesis conditions were used to prepare high surface area N-doped TiO(2) in the anatase phase. The N dopant was derived either from NH(3) in solution or from NH(3) gas bubbled through solution. Bulk N doping levels were determined by an inert gas fusion method and were compared with surface N doping levels determined by X-ray photoelectron spectroscopy. Comparison was also made with the concentration of paramagnetic species measured by electron spin resonance spectroscopy. It was found that both surface and bulk doping levels were typically around 3 orders of magnitude higher than the concentration of paramagnetic N-containing species. All N-doped samples showed higher visible region (lambda > 395 nm) photocatalytic activity than undoped anatase itself. It is argued that catalytic activity is associated with the presence of nitrogen bound to lattice oxygen to give (NO)'O which can be photoexcited to give (NO)(O)(X).

Electronic Structure and Interface Energetics of CuBi2O4 Photoelectrodes.

CuBi2O4 exhibits significant potential for the photoelectrochemical (PEC) conversion of solar energy into chemical fuels, owing to its extended visible-light absorption and positive flat band potential vs the reversible hydrogen electrode. A detailed understanding of the fundamental electronic structure and its correlation with PEC activity is of significant importance to address limiting factors, such as poor charge carrier mobility and stability under PEC conditions. In this study, the electronic structure of CuBi2O4 has been studied by a combination of hard X-ray photoemission spectroscopy, resonant photoemission spectroscopy, and X-ray absorption spectroscopy (XAS) and compared with density functional theory (DFT) calculations. The photoemission study indicates that there is a strong Bi 6s-O 2p hybrid electronic state at 2.3 eV below the Fermi level, whereas the valence band maximum (VBM) has a predominant Cu 3d-O 2p hybrid character. XAS at the O K-edge supported by DFT calculations provides a good description of the conduction band, indicating that the conduction band minimum is composed of unoccupied Cu 3d-O 2p states. The combined experimental and theoretical results suggest that the low charge carrier mobility for CuBi2O4 derives from an intrinsic charge localization at the VBM. Also, the low-energy visible-light absorption in CuBi2O4 may result from a direct but forbidden Cu d-d electronic transition, leading to a low absorption coefficient. Additionally, the ionization potential of CuBi2O4 is higher than that of the related binary oxide CuO or that of NiO, which is commonly used as a hole transport/extraction layer in photoelectrodes. This work provides a solid electronic basis for topical materials science approaches to increase the charge transport and improve the photoelectrochemical properties of CuBi2O4-based photoelectrodes.

An Fe stabilized metallic phase of NiS2 for the highly efficient oxygen evolution reaction.

This work reports a fundamental study on the relationship of the electronic structure, catalytic activity and surface reconstruction process of Fe doped NiS2 (FexNi1-xS2) for the oxygen evolution reaction (OER). A combined photoemission and X-ray absorption spectroscopic study reveals that Fe doping introduces more occupied Fe 3d6 states at the top of the valence band and thereby induces a metallic phase. Meanwhile, Fe doping also significantly increases the OER activity and results in much better stability with the optimum found for Fe0.1Ni0.9S2. More importantly, we performed detailed characterization to track the evolution of the structure and composition of the catalysts after different cycles of OER testing. Our results further confirmed that the catalysts gradually transform into amorphous (oxy)hydroxides which are the actual active species for the OER. However, a fast phase transformation in NiS2 is accompanied by a decrease of OER activity, because of the formation of a thick insulating NiOOH layer limiting electron transfer. On the other hand, Fe doping retards the process of transformation, because of a shorter Fe-S bond length (2.259 Å) than Ni-S (2.400 Å), explaining the better electrochemical stability of Fe0.1Ni0.9S2. These results suggest that the formation of a thin surface layer of NiFe (oxy)hydroxide as an active OER catalyst and the remaining Fe0.1Ni0.9S2 as a conductive core for fast electron transfer is the base for the high OER activity of FexNi1-xS2. Our work provides important insight and design principle for metal chalcogenides as highly active OER catalysts.

Template-Free Nanostructured Fluorine-Doped Tin Oxide Scaffolds for Photoelectrochemical Water Splitting.

The synthesis and characterization of highly stable and conductive F:SnO2 (FTO) nanopyramid arrays are investigated, and their use as scaffolds for water splitting is demonstrated. Current densities during the oxygen evolution reaction with a NiFeOx catalyst at 2 V vs reversible hydrogen electrode were increased 5-fold when substituting commercial FTO (TEC 15) by nanostructured FTO scaffolds. In addition, thin α-Fe2O3 films (∼50 nm thick) were employed as a proof of concept to show the effect of our nanostructured scaffolds during photoelectrochemical water splitting. Double-layer capacitance measurements showed a drastic increase of the relative electrochemically active surface area for the nanostructured samples, in agreement with the observed photocurrent enhancement, whereas UV-vis spectroscopy indicates full absorption of visible light at wavelengths below 600 nm.

Water-Dispersible Copper Sulfide Nanocrystals via Ligand Exchange of 1-Dodecanethiol.

In colloidal Cu2-x S nanocrystal synthesis, thiols are often used as organic ligands and the sulfur source, as they yield high-quality nanocrystals. However, thiol ligands on Cu2-x S nanocrystals are difficult to exchange, limiting the applications of these nanocrystals in photovoltaics, biomedical sensing, and photocatalysis. Here, we present an effective and facile procedure to exchange native 1-dodecanethiol on Cu2-x S nanocrystals by 3-mercaptopropionate, 11-mercaptoundecanoate, and S2- in formamide under inert atmosphere. The product hydrophilic Cu2-x S nanocrystals have excellent colloidal stability in formamide. Furthermore, the size, shape, and optical properties of the nanocrystals are not significantly affected by the ligand exchange. Water-dispersible Cu2-x S nanocrystals are easily obtained by precipitation of the nanocrystals capped by S2-, 3-mercaptopropionate, or 11-mercaptoundecanoate from formamide, followed by redispersion in water. Interestingly, the ligand exchange rates for Cu2-x S nanocrystals capped with 1-dodecanethiol are observed to depend on the preparation method, being much slower for Cu2-x S nanocrystals prepared through heating-up than through hot-injection synthesis protocols. XPS studies reveal that the differences in the ligand exchange rates are due to the surface chemistry of the Cu2-x S nanocrystals, where the nanocrystals prepared via hot-injection synthesis have a less dense ligand layer due to the presence of trioctylphosphine oxide during synthesis. A model is proposed that explains the observed differences in the ligand exchange rates. The facile ligand exchange procedures reported here enable the use of high-quality colloidal Cu2-x S nanocrystals prepared in the presence of 1-dodecanethiol in various applications.

Marrying SPR excitation and metal-support interactions: unravelling the contribution of active surface species in plasmonic catalysis.

Plasmonic catalysis takes advantage of the surface plasmon resonance (SPR) excitation to drive or accelerate chemical transformations. In addition to the plasmonic component, the control over metal-support interactions in these catalysts is expected to strongly influence the performances. For example, CeO2 has been widely employed towards oxidation reactions due to its oxygen mobility and storage properties, which allow for the formation of Ce3+ sites and adsorbed oxygen species from metal-support interactions. It is anticipated that these species may be activated by the SPR excitation and contribute to the catalytic activity of the material. Thus, a clear understanding of the role played by the SPR-mediated activation of surface oxide species at the metal-support interface is needed in order to take advantage of this phenomenon. Herein, we describe and quantify the contribution from active surface oxide species at the metal-support interface (relative to O2 from air) to the activities in green SPR-mediated oxidation reactions. We employed CeO2 decorated with Au NPs (Au/CeO2) as a model plasmonic catalyst and the oxidation of p-aminothiophenol (PATP) and aniline as proof-of-concept transformations. We compared the results with SiO2 decorated with Au NPs (Au/SiO2), in which the formation of surface oxide species at the metal-support interface is not expected. We found that the SPR-mediated activation of surface oxide species at the metal-support interface in Au/CeO2 played a pivotal role in the detected activities, being even higher than the contribution coming from the activation of O2 from air.

Electronic Structure and Band Alignment at the NiO and SrTiO3 p-n Heterojunctions.

Understanding the energetics at the interface, including the alignment of valence and conduction bands, built-in potentials, and ionic and electronic reconstructions, is an important challenge in designing oxide interfaces that have controllable multifunctionalities for novel (opto-)electronic devices. In this work, we report detailed investigations on the heterointerface of wide-band-gap p-type NiO and n-type SrTiO3 (STO). We show that despite a large lattice mismatch (∼7%) and dissimilar crystal structure, high-quality NiO and Li-doped NiO (LNO) thin films can be epitaxially grown on STO(001) substrates through a domain-matching epitaxy mechanism. X-ray photoelectron spectroscopy studies indicate that NiO/STO heterojunctions form a type II "staggered" band alignment. In addition, a large built-in potential of up to 0.97 eV was observed at the interface of LNO and Nb-doped STO (NbSTO). The LNO/NbSTO p-n heterojunctions exhibit not only a large rectification ratio of 2 × 103 but also a large ideality factor of 4.3. The NiO/STO p-n heterojunctions have important implications for applications in photocatalysis and photodetectors as the interface provides favorable energetics for facile separation and transport of photogenerated electrons and holes.