Twin-beam sub-shot-noise raster-scanning microscope.

By exploiting the quantised nature of light, we demonstrate a sub-shot-noise scanning optical transmittance microscope. Our microscope demonstrates, with micron scale resolution, a factor of improvement in precision of 1.76(9) in transmittance estimation gained per probe photon relative to the theoretical model, a shot-noise-limited source of light, in an equivalent single-pass classical version of the same experiment using the same number of photons detected with a 90% efficient detector. This would allow us to observe photosensitive samples with nearly twice the precision, without sacrificing image resolution or increasing optical power to improve signal-to-noise ratio. Our setup uses correlated twin-beams produced by parametric down-conversion, and a hybrid detection scheme comprising photon-counting-based feed-forward and a highly efficient CCD camera.

Fabrication of hybrid Fabry-Pérot microcavity using two-photon lithography for single-photon sources.

For an efficient single-photon source a high-count rate into a well-defined spectral and spatial mode is desirable. Here we have developed a hybrid planar Fabry-Pérot microcavity by using a two-photon polymerization process (2PP) where coupling between single-photon sources (diamond colour centres) and resonance modes is observed. The first step consists of using the 2PP process to build a polymer table structure around previously characterized nitrogen-vacancy (NV) centres on top of a distributed Bragg reflector (DBR) with a high reflectivity at the NV zero-phonon line (ZPL). Afterwards, the polymer structure is covered with a silver layer to create a weak (low Q) cavity where resonance fluorescence measurements from the NVs are shown to be in good agreement with analytical and Finite Difference Time Domain (FDTD) results.

Analysis of a random modulation single photon counting differential absorption lidar system for space-borne atmospheric CO2 sensing.

The ability to observe the Earth's carbon cycles from space provides scientists an important tool to analyze climate change. Current proposed systems are mainly based on pulsed integrated path differential absorption lidar, in which two high energy pulses at different wavelengths interrogate the atmosphere sequentially for its transmission properties and are back-scattered by the ground. In this work an alternative approach based on random modulation single photon counting is proposed and analyzed; this system can take advantage of a less power demanding semiconductor laser in intensity modulated continuous wave operation, benefiting from a better efficiency, reliability and radiation hardness. Our approach is validated via numerical simulations considering current technological readiness, demonstrating its potential to obtain a 1.5 ppm retrieval precision for 50 km averaging with 2.5 W average power in a space-borne scenario. A major limiting factor is the ambient shot noise, if ultra-narrow band filtering technology could be applied, 0.5 ppm retrieval precision would be attainable.

Polarization Engineering in Photonic Crystal Waveguides for Spin-Photon Entanglers.

By performing a full analysis of the projected local density of states (LDOS) in a photonic crystal waveguide, we show that phase plays a crucial role in the symmetry of the light-matter interaction. By considering a quantum dot (QD) spin coupled to a photonic crystal waveguide (PCW) mode, we demonstrate that the light-matter interaction can be asymmetric, leading to unidirectional emission and a deterministic entangled photon source. Further we show that understanding the phase associated with both the LDOS and the QD spin is essential for a range of devices that can be realized with a QD in a PCW. We also show how suppression of quantum interference prevents dipole induced reflection in the waveguide, and highlight a fundamental breakdown of the semiclassical dipole approximation for describing light-matter interactions in these spin dependent systems.

Experimental realization of a one-way quantum computer algorithm solving Simon's problem.

We report an experimental demonstration of a one-way implementation of a quantum algorithm solving Simon's problem-a black-box period-finding problem that has an exponential gap between the classical and quantum runtime. Using an all-optical setup and modifying the bases of single-qubit measurements on a five-qubit cluster state, key representative functions of the logical two-qubit version's black box can be queried and solved. To the best of our knowledge, this work represents the first experimental realization of the quantum algorithm solving Simon's problem. The experimental results are in excellent agreement with the theoretical model, demonstrating the successful performance of the algorithm. With a view to scaling up to larger numbers of qubits, we analyze the resource requirements for an n-qubit version. This work helps highlight how one-way quantum computing provides a practical route to experimentally investigating the quantum-classical gap in the query complexity model.

Reference-frame-independent quantum-key-distribution server with a telecom tether for an on-chip client.

We demonstrate a client-server quantum key distribution (QKD) scheme. Large resources such as laser and detectors are situated at the server side, which is accessible via telecom fiber to a client requiring only an on-chip polarization rotator, which may be integrated into a handheld device. The detrimental effects of unstable fiber birefringence are overcome by employing the reference-frame-independent QKD protocol for polarization qubits in polarization maintaining fiber, where standard QKD protocols fail, as we show for comparison. This opens the way for quantum enhanced secure communications between companies and members of the general public equipped with handheld mobile devices, via telecom-fiber tethering.

On-chip manipulation of single photons from a diamond defect.

Operating reconfigurable quantum circuits with single photon sources is a key goal of photonic quantum information science and technology. We use an integrated waveguide device containing directional couplers and a reconfigurable thermal phase controller to manipulate single photons emitted from a chromium related color center in diamond. Observation of both a wavelike interference pattern and particlelike sub-Poissionian autocorrelation functions demonstrates coherent manipulation of single photons emitted from the chromium related center and verifies wave particle duality.

Nonclassical 2-photon interference with separate intrinsically narrowband fibre sources.

In this paper, we demonstrate a source of photon pairs based on four-wave-mixing in photonic crystal fibres. Careful engineering of the phase matching conditions in the fibres enables us to create photon pairs at 597 nm and 860 nm in an intrinsically factorable state showing no spectral correlations. This allows for heralding one photon in a pure state and hence renders narrow band filtering obsolete. The source is narrow band, bright and achieves an overall detection efficiency of up to 21% per photon. For the first time, a Hong-Ou-Mandel interference with unfiltered photons from separate fibre sources is presented.

Narrowband high-fidelity all-fibre source of heralded single photons at 1570 nm.

An all-fibre heralded single photon source operating at 1570 nm has been demonstrated. The device generates correlated photon pairs, widely spaced in frequency, through four-wave mixing in a photonic crystal fibre. Separation of the pair photons and narrowband filtering is all achieved in fibre. The output heralded single photon rate was 9.2 x 10(4) per second, with a counts-to-accidentals ratio of 10.4 and a heralding fidelity of 52 %. Furthermore, narrowband filtering ensured that the output single photon state was near time-bandwidth limited with a coherence length of 4 ps. Such a source is well suited to quantum information processing applications.

Constructing 3D crystal templates for photonic band gap materials using holographic optical tweezers.

A simple and robust method is presented for the construction of 3-dimensional crystals from silica and polystyrene microspheres. The crystals are suitable for use as templates in the production of three-dimensional photonic band gap (PBG) materials. Manipulation of the microspheres was achieved using a dynamic holographic assembler (DHA) consisting of computer controlled holographic optical tweezers. Attachment of the microspheres was achieved by adjusting their colloidal interactions during assembly. The method is demonstrated by constructing a variety of 3-dimensional crystals using spheres ranging in size from 3 microm down to 800 nm. A major advantage of the technique is that it may be used to build structures that cannot be made using self-assembly. This is illustrated through the construction of crystals in which line defects have been deliberately included, and by building simple cubic structures.

Experimental verification of multipartite entanglement in quantum networks.

Multipartite entangled states are a fundamental resource for a wide range of quantum information processing tasks. In particular, in quantum networks, it is essential for the parties involved to be able to verify if entanglement is present before they carry out a given distributed task. Here we design and experimentally demonstrate a protocol that allows any party in a network to check if a source is distributing a genuinely multipartite entangled state, even in the presence of untrusted parties. The protocol remains secure against dishonest behaviour of the source and other parties, including the use of system imperfections to their advantage. We demonstrate the verification protocol in a three- and four-party setting using polarization-entangled photons, highlighting its potential for realistic photonic quantum communication and networking applications.

Experimental demonstration of graph-state quantum secret sharing.

Quantum communication and computing offer many new opportunities for information processing in a connected world. Networks using quantum resources with tailor-made entanglement structures have been proposed for a variety of tasks, including distributing, sharing and processing information. Recently, a class of states known as graph states has emerged, providing versatile quantum resources for such networking tasks. Here we report an experimental demonstration of graph state-based quantum secret sharing--an important primitive for a quantum network with applications ranging from secure money transfer to multiparty quantum computation. We use an all-optical setup, encoding quantum information into photons representing a five-qubit graph state. We find that one can reliably encode, distribute and share quantum information amongst four parties, with various access structures based on the complex connectivity of the graph. Our results show that graph states are a promising approach for realising sophisticated multi-layered communication protocols in quantum networks.

Experimental demonstration of a graph state quantum error-correction code.

Scalable quantum computing and communication requires the protection of quantum information from the detrimental effects of decoherence and noise. Previous work tackling this problem has relied on the original circuit model for quantum computing. However, recently a family of entangled resources known as graph states has emerged as a versatile alternative for protecting quantum information. Depending on the graph's structure, errors can be detected and corrected in an efficient way using measurement-based techniques. Here we report an experimental demonstration of error correction using a graph state code. We use an all-optical setup to encode quantum information into photons representing a four-qubit graph state. We are able to reliably detect errors and correct against qubit loss. The graph we realize is setup independent, thus it could be employed in other physical settings. Our results show that graph state codes are a promising approach for achieving scalable quantum information processing.

Two-photon interference between disparate sources for quantum networking.

Quantum networks involve entanglement sharing between multiple users. Ideally, any two users would be able to connect regardless of the type of photon source they employ, provided they fulfill the requirements for two-photon interference. From a theoretical perspective, photons coming from different origins can interfere with a perfect visibility, provided they are made indistinguishable in all degrees of freedom. Previous experimental demonstrations of such a scenario have been limited to photon wavelengths below 900 nm, unsuitable for long distance communication, and suffered from low interference visibility. We report two-photon interference using two disparate heralded single photon sources, which involve different nonlinear effects, operating in the telecom wavelength range. The measured visibility of the two-photon interference is 80 ± 4%, which paves the way to hybrid universal quantum networks.

Quantum communications and beyond.

We introduce the concept of encoding and manipulation of information on single photons. This is exploited in the technique of quantum cryptography to distribute random bit strings in a secure way. More general quantum information processing requires a conditional interaction between separate photons. This can be achieved by exploiting the interference between two photons at a beam-splitter and the non-linearity inherent in detection. As yet the efficiency of such gates is low.

Absolute measurement of detector quantum efficiency using parametric downconversion.

We show that a parametric downconversion crystal emitting angle resolved coincident photon pairs can be used to measure the absolute quantum efficiency of a photon counting detection system. We have measured the quantum efficiency of a silicon avalanche photodiode, operated in Geiger mode, as a function of operating voltage and compare this to results obtained using a conventional method.

Characterization of silicon avalanche photodiodes for photon correlation measurements. 2: Active quenching.

We continue examination of the photon correlation properties of silicon avalanche photodiodes operated in photon-counting mode by extending their operation from that of passive quenching(1) to active quenching, yielding shorter dead time and higher frequency operation.

Experimental demonstration of single photon rangefinding using parametric downconversion.

We exploit the coincidence properties of photon pairs created in spontaneous parametric fluorescence to perform a low light level rangefinding experiment. One photon of each pair is sent to the target, and the small fraction returned is delayed by the return trip time. This delay is measured using a multichannel coincidence counter with gate time down to 10 ns. With a few picowatts output power and a target return of 10(-4)we obtain 1-m resolution range estimates in a few seconds with low levels of background light. We discuss the potential of the technique for millimeter accuracy ranging (or surveying) in high ambient light levels.

Photon counting with passively quenched germanium avalanche.

We demonstrate photon counting in germanium avalanche photodiodes biased beyond breakdown and quenched with a simple series resistance circuit. The devices show moderate (> 7%) quantum efficiency with limited afterpulsing and dark counts and subnanosecond jitter.

Bragg scattering from an obliquely illuminated photonic crystal fiber.

Scattering at visible frequencies from a two-dimensional silica/air photonic crystal material in the form of a fine fiber reveals the hexagonal crystal structure of the material. Oblique illumination allows the observation of first-order Bragg conditions even for a crystal structure with a pitch several times the wavelength of light. These scattering measurements demonstrate the feasibility of a low-loss waveguide based on photonic bandgap effects.