Depolymerization within a Circular Plastics System.

The societal importance of plastics contrasts with the carelessness with which they are disposed. Their superlative properties lead to economic and environmental efficiency, but the linearity of plastics puts the climate, human health, and global ecosystems at risk. Recycling is fundamental to transitioning this linear model into a more sustainable, circular economy. Among recycling technologies, chemical depolymerization offers a route to virgin quality recycled plastics, especially when valorizing complex waste streams poorly served by mechanical methods. However, chemical depolymerization exists in a complex and interlinked system of end-of-life fates, with the complementarity of each approach key to environmental, economic, and societal sustainability. This review explores the recent progress made into the depolymerization of five commercial polymers: poly(ethylene terephthalate), polycarbonates, polyamides, aliphatic polyesters, and polyurethanes. Attention is paid not only to the catalytic technologies used to enhance depolymerization efficiencies but also to the interrelationship with other recycling technologies and to the systemic constraints imposed by a global economy. Novel polymers, designed for chemical depolymerization, are also concisely reviewed in terms of their underlying chemistry and potential for integration with current plastic systems.

Light-Induced Polymeric Frustrated Radical Pairs as Building Blocks for Materials and Photocatalysts.

Polymeric frustrated Lewis pairs, or poly(FLP)s, have served to bridge the gap between functional polymer science and main group catalysis, pairing the uniqueness of sterically frustrated Lewis acids and bases with a polymer scaffold to create self-healing gels and recyclable catalysts. However, their utilization in radical chemistry is unprecedented. In this paper, we disclose the synthesis of polymeric frustrated radical pairs, or poly(FRP)s, by in situ photoinduction of FLP moieties, where their Lewis acidic and basic centers are tuned to promote single electron transfer (SET). Through systematic manipulation of the chemical structure, we demonstrate that inclusion of ortho-methyl groups on phosphine monomers is crucial to enable SET. The generation of radicals is evidenced by monitoring the stable polymeric phosphine radical cations via UV/vis and EPR spectroscopy. These new poly(FRP)s enable both catalytic hydrogenation and radical-mediated photocatalytic perfluoroalkylations. These polymeric radical systems open new avenues to design novel functional polymers for catalysis and photoelectrical chemistry.

Sustainability and Polyesters: Beyond Metals and Monomers to Function and Fate.

Poor waste management and unchecked consumption underpin our current paradigm of plastics use, which is demonstrably unsustainable in the long term. Nonetheless, the utility and versatility of plastics suggest that the notion of a plastic-free society is also unsustainable. Responses to this conundrum are increasing, and among these are research efforts focused on the development of more sustainable plastics. This Account, written by trained chemists, reflects an academic research journey culminating in an appreciation of the importance of improving and enabling the overarching systems that plastics exist within. Our primary initial focus was on catalyst development because catalysts are key drivers of sustainability by improving the efficiency and ease of polymerization. Metal catalysts ranging in ligand structure and the incorporated metal(s) were developed for the preparation of traditional polyesters such as poly(lactic acid) and polycaprolactone. The central themes in these works were stereocontrol (tacticity), efficiency (polymerization rate), and versatility (monomer scope). Alongside insights gained by systematically varying catalyst structure came impressive results gained through collaboration, including the remarkably high activity of novel heterometallic zinc catalysts toward various cyclic esters.This catalysis work was complemented by and slowly transitioned to a focus on polymer functionality and monomer design. Several fundamental studies focus on polymer topology, specifically star-shaped polyesters, tuned arm number, length, and tacticity. These reports feature emphases on the end of life (solvolysis) and physical properties of polymers, which were increasingly important themes as work shifted toward new methods of incorporating functionality in polymers produced by ring-opening polymerization. Three key highlights demonstrate this shift: the first two rely upon the exploitation of olefin metathesis (cross- and ring-closing) to functionalize polyesters or polyethers, and the third involves the manipulation of ring-opening polymerization equilibrium to enable selective monomer recovery from a polyester. Our foundational work on 1,3-dioxolan-4-one (DOX) monomers is then discussed because this emerging class of molecules offers a distinct synthetic pathway toward functional polyesters, both conventional and novel. With this DOX framework, polyesters that are usually challenging to synthesize (e.g., poly(mandelic acid)) are accessible because polymerization is driven by the concomitant, controlled extrusion of small molecules (acetone or formaldehyde).After these polyester-focused highlights, the foundation of our ongoing work is presented, namely, that polymer sustainability must be viewed from a systems-level perspective, including economic and social components alongside the environmental considerations. Material design must be driven by practice, and we have to involve key players in academia, industry, and government in a concerted effort to enable positive and robust change. The key goal is to develop sustainable systems that retain plastics in their highest value state for as long as possible by designing materials and products for a particular (and assured) end-of-life fate, whether that be reuse, recycling, (bio)degradation, or energy recovery.

Cyclic Ether Triggers for Polymeric Frustrated Lewis Pair Gels.

Sterically hindered Lewis acid and base centers are unable to form Lewis adducts, instead forming frustrated Lewis pairs (FLPs), where latent reactivity can be utilized for the activation of small molecules. Applying FLP chemistry into polymeric frameworks transforms this chemistry into responsive and functional materials. Here, we report a versatile synthesis strategy for the preparation of macromolecular FLPs and explore its potential with the ring-opening reactions of cyclic ethers. Addition of the cyclic substrates triggered polymer network formation, where the extent of cross-linking, strength of network, and reactivity are tuned by the steric and electronic properties of the ethers. The resultant networks behave like covalently cross-linked polymers, demonstrating the versatility of FLPs to simultaneously tune both small-molecule capture and mechanical properties of materials.

Mechanical Recycling of Packaging Plastics: A Review.

The current global plastics economy is highly linear, with the exceptional performance and low carbon footprint of polymeric materials at odds with dramatic increases in plastic waste. Transitioning to a circular economy that retains plastic in its highest value condition is essential to reduce environmental impacts, promoting reduction, reuse, and recycling. Mechanical recycling is an essential tool in an environmentally and economically sustainable economy of plastics, but current mechanical recycling processes are limited by cost, degradation of mechanical properties, and inconsistent quality products. This review covers the current methods and challenges for the mechanical recycling of the five main packaging plastics: poly(ethylene terephthalate), polyethylene, polypropylene, polystyrene, and poly(vinyl chloride) through the lens of a circular economy. Their reprocessing induced degradation mechanisms are introduced and strategies to improve their recycling are discussed. Additionally, this review briefly examines approaches to improve polymer blending in mixed plastic waste streams and applications of lower quality recyclate.

Alkyne-Tagged PLGA Allows Direct Visualization of Nanoparticles In Vitro and Ex Vivo by Stimulated Raman Scattering Microscopy.

Polymeric nanoparticles (NPs) are attractive candidates for the controlled and targeted delivery of therapeutics in vitro and in vivo. However, detailed understanding of the uptake, location, and ultimate cellular fate of the NPs is necessary to satisfy safety concerns, which is difficult because of the nanoscale size of these carriers. In this work, we show how small chemical labels can be appended to poly(lactic acid-co-glycolic acid) (PLGA) to synthesize NPs that can then be imaged by stimulated Raman scattering microscopy, a vibrational imaging technique that can elucidate bond-specific information in biological environments, such as the identification of alkyne signatures in modified PLGA terpolymers. We show that both deuterium and alkyne labeled NPs can be imaged within primary rat microglia, and the alkyne NPs can also be imaged in ex vivo cortical mouse brain tissue. Immunohistochemical analysis confirms that the NPs localize in microglia in the mouse brain tissue, demonstrating that these NPs have the potential to deliver therapeutics selectively to microglia.

Morphology of Poly(styrene- co-butadiene) Random Copolymer Thin Films and Nanostructures on a Graphite Surface.

We studied the morphology of poly(styrene- co-butadiene) random copolymers on a graphite surface. Polymer solutions were spin coated onto graphite, at various concentrations and molecular weights. The polymer films and nanostructures were imaged using atomic force microscopy. Above the overlap concentration, thin films formed. However, total wetting did not occur, despite the polymers being well above their Tg. Instead, dewetting was observed, suggesting the films were in a state of metastable equilibrium. At lower concentrations, the polymers formed networks, nanoislands, and nanoribbons. Ordered nanopatterns were observed on the surface; the polymers orientated themselves due to π-π stacking interactions reflecting the crystalline structure of the graphite. At the lowest concentration, this ordering was very pronounced. At higher concentrations, it was less defined but still statistically significant. Higher degrees of ordering were observed with poly(styrene- co-butadiene) than polystyrene and polybutadiene homopolymers as the copolymer's aromatic rings are distributed along a flexible chain, which maximizes π-π stacking. At the two lowest concentrations, the size of the nanoislands and nanoribbons remained similar with varying molecular weight. However, at higher concentrations, the polymer network features were largest at the lowest molecular weight, indicating that in this case, a large proportion of shorter chains stay on top of the adsorbed ones. The contact angles of the polymer nanostructures remained mostly constant with size, which is due to the strong polymer/graphite adhesion dominating over line tension and entropic effects.

Polymeric hole-transport materials with side-chain redox-active groups for perovskite solar cells with good reproducibility.

Two monomers, M:OO and M:ON, and their corresponding polymers, P:OO and P:ON, were prepared from styrene derivatives N,N-diphenyl-4-vinyl-aniline with different substituents (-OCH3 and -N(CH3)2) in the N-phenyl para positions. The polymers were synthesised and fully characterised to study their function as hole transport materials (HTMs) in perovskite solar cells (PSCs). The thermal, optical and electrochemical properties and performance of these monomers and polymers as HTMs in PSCs were compared in terms of their structure. The polymers form more stable amorphous glassy states and showed higher thermal stability than the monomers. The different substituent in the para position influenced the highest occupied molecular orbital (HOMO) level, altering the oxidation potential. Both monomers and polymers were employed as HTMs in perovskite solar cells with a device configuration FTO/bl-TiO2/mp-TiO2/CH3NH3PbI3/HTM/Au resulting in power conversion efficiencies of 7.48% for M:OO, 5.14% for P:OO, 5.28% for P:ON and 3.52% for M:ON. Although showing comparatively low efficiencies, the polymers showed much superior reproducibility in comparison with Spiro-OMeTAD or the monomers, suggesting further optimisation of polymeric HTMs with redox side groups is warranted.

Correction: Polymeric hole-transport materials with side-chain redox-active groups for perovskite solar cells with good reproducibility.

Correction for 'Polymeric hole-transport materials with side-chain redox-active groups for perovskite solar cells with good reproducibility' by Rosinda Fuentes Pineda et al., Phys. Chem. Chem. Phys., 2018, 20, 25738-25745.

Functionalizable Stereocontrolled Cyclopolyethers by Ring-Closing Metathesis as Natural Polymer Mimics.

Whereas complex stereoregular cyclic architectures are commonplace in biomacromolecules, they remain rare in synthetic polymer chemistry, thus limiting the potential to develop synthetic mimics or advanced materials for biomedical applications. Herein we disclose the formation of a stereocontrolled 1,4-linked six-membered cyclopolyether prepared by ring-closing metathesis (RCM). Ru-mediated RCM, with careful control of the catalyst, concentration, and temperature, selectively affords the six-membered-ring cyclopolymer. Under optimized reaction conditions, no metathetical degradation, macrocycle formation, or cross-linking was observed. Post-polymerization modification by dihydroxylation afforded a novel polymer family encompassing a poly(ethylene glycol) backbone and sugar-like functionalities ("PEGose"). This strategy also paves the way for using RCM as an efficient method to synthesize other stereocontrolled cyclopolymers.

Frustrated Lewis Pair Polymers as Responsive Self-Healing Gels.

Steric bulk prevents the formation of strong bonds between Lewis acids and bases in frustrated Lewis pairs (FLPs), where latent reactivity makes these reagents transformative in small molecule activations and metal-free catalysis. However, their use as a platform for developing materials chemistry is unexplored. Here we report a fully macromolecular FLP, built from linear copolymers that containing either a sterically encumbered Lewis base or Lewis acid as a pendant functional group. The target functional copolymers were prepared by a controlled radical copolymerization of styrene with designer boron or phosphorus containing monomers. Mixtures of the B- and P-functionalized polystyrenes do not react, with the steric bulk of the functional monomers preventing the favorable Lewis acid base interaction. Addition of a small molecule (diethyl azodicarboxylate) promotes rapid network formation, cross-linking the reactive polymer chains. The resulting gel is dynamic, can self-heal, is heat responsive, and can be reshaped by postgelation processing.

Poly(styrene-co-butadiene) random copolymer thin films and nanostructures on a mica surface: morphology and contact angles of nanodroplets.

The self-assembly of poly(styrene-co-butadiene) random copolymers on mica surfaces was studied by varying solution concentrations and polymer molecular weights. Toluene solutions of the poly(styrene-co-butadiene) samples were spin coated onto a mica surface and the resulting polymer morphology was investigated by atomic force microscopy. At higher concentrations, thin films formed with varying thicknesses; some dewetting was observed which depended on the molecular weight. Total dewetting did not occur despite the polymer's low glass transition temperature. Instead, partial dewetting was observed suggesting that the polymer was in a metastable equilibrium state. At lower concentrations, spherical cap shaped nanodroplets formed with varying sizes from single polymer chains to aggregates containing millions of chains. As the molecular weight was increased, fewer aggregates were observed on the surface, albeit with larger sizes resulting from increased solution viscosities and more chain entanglements at higher molecular weights. The contact angles of the nanodroplets were shown to be size dependent. A minimum contact angle occurs for droplets with radii of 100-250 nm at each molecular weight. Droplets smaller than 100 nm showed a sharp increase in contact angle; attributed to an increase in the elastic modulus of the droplets, in addition, to a positive line tension value. Droplets larger than 250 nm also showed an increased contact angle due to surface heterogeneities which cannot be avoided for larger droplets. This increase in contact angle plateaus as the droplet size reaches the macroscopic scale.

Assessment and Application of Density Functional Theory for the Prediction of Structure and Reactivity of Vanadium Complexes.

We assess the performance of six density functionals, each paired with one of five basis sets (a total of 30 model chemistries) for the prediction of geometrical parameters in the coordination sphere of nine vanadium complexes (for a total of 270 structural analyses). We find that results are generally consistent over the range of functionals tested and that none fail drastically. For bond lengths, the model chemistry PBE0/QZVP performed the best overall (having a MAD of only 0.02 Å from experiment) yet PBE0/6-31G* provides nearly identical results. For bond angles, PBE0 also performed best overall and, when combined with the 6-31G* basis, produces one of the smallest error distributions of any model chemistry tested. We subsequently applied the PBE0/6-31G* model chemistry to understanding the mechanism of action of a [BIMPY]VCl3 catalyst in the polymerization of styrene (Sty) and vinyl acetate (VAc). Our results indicate that the [BIMPY]VCl3 catalyst operates through a unique, two-step reaction pathway: dehalogenation to form a reactive V(II) intermediate (a highly favorable process) followed by a potentially reversible OMRP to control the polymerization of vinyl acetate. Control over vinyl acetate is facilitated by both the higher reactivity of the radical species and the participation of the ester group in the trapping step. In both the Sty and VAc cases we predict relatively poor control of the polymerization with the vanadium catalyst, which is in good agreement with our experimental results.

ATRP/OMRP/CCT interplay in styrene polymerization mediated by iron(II) complexes: A DFT study of the α-diimine system.

A DFT study of various model systems has addressed the interference of catalytic chain transfer (CCT) as a function of the R(2) substituent in the atom-transfer radical polymerization (ATRP) of styrene catalyzed by [FeCl2 (R(1) N=C(R(2))C(R(2))=NR(1))] complexes. All model systems used R(1) =CH3 in place of the experimental Cy and tBu substituents and 1-phenylethyl in place of the polystyrene (PS) chain. A mechanistic investigation of 1) ATRP activation, 2) radical trapping in organometallic-mediated radical polymerization (OMRP), and 3) pathways to the hydride CCT intermediate was conducted with a simplified system with R(2)=H. This study suggests that CCT could occur by direct hydrogen-atom transfer without any activation barrier. Further analysis of more realistic models with R(2)=p-C6 H4 F or p-C6 H4 NMe2 suggests that the electronic effect of the aryl para substituents significantly alters the ATRP activation barrier. Conversely, the hydrogen-atom-transfer barrier is essentially unaffected. Thus, the greater ATRP catalytic activity of the p-NMe2 system makes the background CCT process less significant. The DFT study also compares the [FeCl2 (R(1) N=C(R(2))=C(R(2))=NR(1))] systems with a diaminobis(phenolato) derivative for which the CCT process shows even greater accessibility but has less incidence because of faster ATRP chain growth and interplay with a more efficient OMRP trapping. The difference between the two systems is attributed to destabilization of the Fe(II) catalyst by the geometric constraints of the tetradentate diaminobis(phenolato) ligand.

Atom transfer radical polymerization (ATRP) and organometallic mediated radical polymerization (OMRP) of styrene mediated by diaminobis(phenolato)iron(II) complexes: a DFT study.

This study has addressed the radical polymerization of styrene mediated by the diaminobis(phenolate) complexes [Fe(O-2,4-Y2C6H2-5-CH2)2NCH2CH2NMe2], abbreviated as [Fe(II)]. The system is known to be well controlled when Y = Cl but not when Y = alkyl. The control was proposed to occur by a dual ATRP+OMRP mechanism. We have used DFT calculations to address the Y = Cl and Y = CH3 systems. The growing radical chain, ATRP dormant chain, and OMRP dormant chain were simplified to PhCH(CH3)(•), PhCH(CH3)-Cl, and [PhCH(CH3)-Fe(III)]. The idealized ATRP activation/deactivation equilibrium involves [Fe(III)-Cl] (I(Y)) and PhCH(CH3)(•) on the active side and [Fe(II)] (II(Y)) and PhCH(CH3)-Cl on the dormant side, whereas the OMRP activation/deactivation relates [Fe(II)] and PhCH(CH3)(•) with [PhCH(CH3)-Fe(III)] (III(Y)). A benchmarking of various functionals against the known spin properties of alkylporphyriniron(III) shows B3PW91* to be a suitable functional. For the purpose of bond dissociation energy calculations, a dispersion correction was made (B3PW91*-D3). For both Y systems, the ground state is a spin sextet for I, a spin quintet for II, and a spin quartet for III. The calculations show a greater energy cost for the ATRP activation process involving Cl atom addition to II(Cl) to yield I(Cl) (7.2 kcal/mol) relative to the process transforming II(Me) to I(Me) (2.1 kcal/mol). On the other hand, the alkyl addition transforming II to III provides slightly greater stabilization for II(Cl) (27.1 kcal/mol) than for II(Me) (26.1 kcal/mol). As a result, both ATRP and OMRP trapping processes provide greater stabilization for the Y = Cl system, in agreement with the observed better control. The charge analysis attributes these minor but determining energy differences to the inductive electron withdrawing effect of the phenolato Cl substituents. The ATRP and OMRP activation/deactivation pathways have been analyzed in relation to the spin state change; they show in each case the absence of an activation barrier, and both processes corresponding to spin allowed single-state pathways occurring on the quartet (OMRP) and quintet (ATRP) potential energy surfaces. Molecular volume calculations suggest that the balance between ATRP and OMRP may shift in favor of the latter at higher pressures.

Mechanical Properties and Recyclability of Fiber Reinforced Polyester Composites.

Fiber reinforced polymer composites (FRPs) are valuable construction materials owing to their strength, durability, and design flexibility; however, conventional FRPs utilize petroleum-based polymer matrices with limited recyclability. Furthermore, fiber reinforcements are made from nonrenewable feedstocks, through expensive and energy intensive processes, making recovery and reuse advantageous. Thus, FRPs that use biobased and degradable or reprocessable matrices would enable a more sustainable product, as both components can be recovered and reused. We previously developed a family of degradable and reprocessable cross-linked polyesters from bioderived cyclic esters (l-lactide, δ-valerolactone, and ε-caprolactone) copolymerized with a bis(1,3-dioxolan-4-one) cross-linker. We now incorporate these networks into FRPs and demonstrate degradability of the matrix into tartaric acid and oligomers, enabling recovery and reuse of the fiber reinforcement. Furthermore, the effect of varying comonomer structure, catalyst, reinforcement type, and lay-up method on mechanical properties of the resultant FRPs is explored. The FRPs produced have tensile strengths of up to 202 MPa and Young's moduli up to 25 GPa, promising evidence that sustainable FRPs can rival the mechanical properties of conventional high performance FRPs.

Polymeric bis(triphenylphosphine)iminium chloride as a recyclable catalyst.

Metal-free catalysts have garnered considerable interest as an environmental and economical alternative to precious metal catalysts. Bis(triphenylphosphine)iminium chloride (PPNCl) has emerged as a prominent choice due to its air and thermal stability and broad reactivity, especially in applications where a bulky cation is needed. The high phosphorus content and synthetic effort required for catalyst synthesis increase environmental impact; the recyclability of PPNCl in catalytic processes remains largely unexplored. The potential development of a polymer-supported PPNCl catalysts therefore desirable to enable this recyclability. In this work, we synthesise polymeric PPNCl (poly(PPNCl)) for the first time. Poly(PPNCl) demonstrates a comparative catalytic reactivity to its small molecule variant when employed as a catalyst in halogen-exchange reactions and CO2/epoxide coupling. For the latter the effect of catalyst loading, CO2 pressure, reaction time and addition of co-catalyst on conversion and selectivity was investigated. Poly(PPNCl) was easily recovered from the crude product by simple precipitation and its catalytic reactivity was well-maintained over three reaction cycles, providing environmental and economic advantages for sustainable reaction development.

Defining quality by quantifying degradation in the mechanical recycling of polyethylene.

Polyolefins have a multitude of uses across packaging, automotive and construction sectors. Their resistance to degradation during reprocessing enables recyclability, but variability in recycled polymer feedstocks renders it difficult to assure their manufacturing suitability. The lack of quality control methods has disabled circular economy pathways; product failure is costly, wasteful and time-intensive. Using rheology-simulated and extrusion-based recycling experiments, we explore the degradation pathways of high-density polyethylene (HDPE). Chain scission dominates during the initial degradation of HDPE, and increasing exposure to O2 shifts the dominant mechanism to long-chain branching. Importantly, extending this method to post-consumer recyclate (PCR), the results show potential as a methodology to assess recyclate quality to enable a circular plastics economy. In this study, we establish the validity of this rheology simulation to define a characteristic degradation parameter, relating it to the structural evolution under different environments defined for virgin HDPE and post-consumer recyclate (PCR).

Effect of Polymer Host on Aggregation-Induced Enhanced Emission of Fluorescent Optical Brighteners.

Fluorophores displaying concentration-dependent luminescence are becoming increasingly valuable in stress-sensing, tagging, and dyeing applications, including the quantification of recycled content in plastic packaging. In this work, we investigate the effects of the polymer matrix, dye structure, and crystallinity on aggregation-induced enhanced emission (AIEE). We demonstrate that the aggregation threshold required for successful quantification can be adjusted through modulation of guest-host (dye-polymer) interactions and monitored using an array of fluorescence characterization. Modification of guest-host interactions is realized through choice of host, change of guest, and tuning of the crystallinity of the host system. Increasing the number of guest-host interactions and solubility between guest and host, loosely predicted through the calculation of the solubility parameter, increases the aggregation threshold relative to other low-polarity and low-interacting systems. We demonstrate that issues, such as loading level and cost, associated with high aggregation thresholds, can be circumvented by increasing system crystallinity, improving spectral intensities, and subsequent quantification. These insights explore the fundamental understanding of supramolecular interactions that govern dye-polymer systems.